How to unbind mouse click 4&5 on firefox, because I use taht for an other software ?

I want to unbind mouse click 4 & 5 on firefox.
Because I use this buttons fort "Mumlble (chatvocal)"
When I click on my button 4 or 5 of my mouse, firefox goes to the previous or next page. Can you help me please ?
(I want not change my bind on mumble, it for that I want delete the button 4 & 5 of my mouse on firefox)

Try http://www.highrez.co.uk/downloads/XMouseButtonControl.htm - X-Mouse Button Control

Similar Messages

Using Firefox 3.6 after a few mouse click/ keyboard input the firefox window is no more active, mouse click and keyboard input is inactive ; then I click on the taskbar and the keyboard is active again during a few click then it stops again etc.

Using Firefox 3.6 after a few mouse click/ keyboard input the firefox window is no more active, mouse click and keyboard input is inactive ;
to solve it I click on the taskbar and the keyboard is active again during a few click then it does not work any more and I click again on the task bar etc.
after several repetitions, I have to call the task manager alt+del+ctrl, then come back to the firefox window to be able to use keyboard and mouse again

Attaching the picture for the tab shape I want...

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. How do I fix this?

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
This happens each and every time, on different Wifi networks, in different locations. On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?

Try this DNS server ...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch both your browsers to test.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
And here > Wi-Fi: How to troubleshoot Wi-Fi connectivity

HT5622 how do I find my me ID? What do I use it for?

how do I find my me ID? What do I use it for?

Hello 3greatscholars,
Thank you for the question. Your Apple ID is usually your email address. If you are unsure if you have an Apple ID, use the following steps to look it up:
An Apple ID is your username for everything you do with Apple: shopping the iTunes store, signing in to iCloud, buying an app, using iMessage, and more. That's why it's best to use a single Apple ID and not forget it. Using multiple Apple IDs might be confusing and may cause issues with accessing purchased content or using some services.
If you can't remember your Apple ID, follow these steps to look for it:
Go to My Apple ID (appleid.apple.com) and click “Find your Apple ID”.
Enter your first name, last name, current email address, and any prior email addresses that you might have used to create an Apple ID. Apple uses this information to search for Apple IDs.
If no Apple IDs are found, follow the onscreen instructions to create an Apple ID.
If one Apple ID is found, choose whether to receive an email from Apple or answer security questions. Both options will conclude by asking you to reset your Apple ID password. Follow the instructions provided.
If multiple Apple IDs are found, select the one that matches your current email address. Then choose whether to receive an email from Apple or answer security questions. Both options will conclude by asking you to reset your Apple ID password. Follow the instructions provided.
Apple ID: How to find your Apple ID
http://support.apple.com/kb/HT5625
Additionally, you can use this article if you find the Apple ID but forgot the password:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
Find more information about where you can use an Apple ID at the following link:
Where can I use my Apple ID?
http://support.apple.com/kb/HT5616
Thank you for using Apple Support Communities.
Best,
Sheila M.

What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

Hi All,
I am new to TestStand. Still in the process of learning it.
What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
Thanks in advance,
LaVIEWan
Solved!
Go to Solution.

Hi,
Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
Regards
Ray Farmer

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

How can I change from paying with a credit card to using prepaid for itunes

How can I change from paying with a credit card to using prepaid for itunes on ipad 2 .alrwady have app ID

iTunes Store: Changing Account Information
http://support.apple.com/kb/HT1918
Apple ID Support - Manage Account
http://www.apple.com/support/appleid/manage/
 Cheers, Tom

Automator - How do I: Mouse Click, Move Windows, and more

Hello,
I am attempting to create my own Automator programs and for a while I had some that worked nicely. I have recently been tweaking my iMac so that it can "think" on its own (by automator of course) and do things for me. However, I've run across a block with Mavericks (I believe it's due to Mavericks).
1. How can I get Automator to register a mouse click? "Watch me do" does not seem to want to work for me at all. I also would prefer if it would just be a registered mouse click, but not actually use the mouse (I know this is possible) so that if I'm doing something and it runs, it won't disturb my mouse and I can keep working.
2. How can I register a keyboard stroke? Same as above
3. How can I have automator move windows? I have two monitors and there are times when I may want it to move a window from one mintor to another
The following is a list of all the things I'm attempting to accomplish at the moment (with other things when I think of them) with automator (either through applications, folder actions, or ical actions):
1. Register a mouse click at a given area or on a given element in a safari page
2. Register a keyboard stroke in a given program (be able to focus on a program and then do the keystroke)
3. Move windows from one location to another
4. Full-screen and Un-full-screen iTunes at certain times of day
5. Download all purchased items on iTunes that aren't on the computer (sometimes iTunes doesn't download stuff if it was downloaded on my MacBook Pro first)
6. Automatically voice read reminders (that I've set in Reminders) each day at a given time (I can use loop to repeat it to make sure I hear it all)
I'll think of more of course, but the mouse click, keyboard stroke, and moving windows is the big thing I'm trying to figure out how to do. Can anyone help?
Also, I am not a computer tech. I am tinkering with this because it's fun and helpful, but an answer of "just use applescript" or "just use java" will likely just give me a headache. I know that it's going to be one of those codes, but I'm hoping someone has a "base" code that can be copied and pasted that's just a standard click that I can adjust for where I need to click and what process I need to click on.
If there is an Action Pack that includes a "Register Mouse Click" and/or "Register Keyboard Stroke", then that would work great, but the only action packs for automator I've seen that work with Mavericks is for photoshop.

You're asking for a lot in one post. It would be better to break your requests down a bit.
For example, to deal with mouse clicks, you can use the Automator Action Run Shell Script with this python script:
import sys
import time
from Quartz.CoreGraphics import *
def mouseEvent(type, posx, posy):
        theEvent = CGEventCreateMouseEvent(None, type, (posx,posy), kCGMouseButtonLeft)
        CGEventPost(kCGHIDEventTap, theEvent)
def mousemove(posx,posy):
        mouseEvent(kCGEventMouseMoved, posx,posy);
def mouseclick(posx,posy):
        mouseEvent(kCGEventLeftMouseDown, posx,posy);
        mouseEvent(kCGEventLeftMouseUp, posx,posy);
ourEvent = CGEventCreate(None);
# Save current mouse position
currentpos=CGEventGetLocation(ourEvent);
# Click the "Apple"
mouseclick(25, 5);
# 1 second delay
time.sleep(1);
# Restore mouse position
mousemove(int(currentpos.x),int(currentpos.y))
It will look like this in Automator:
To drag something (i.e. a window, a file icon) from position 40,60 to 60,300:
import time
from Quartz.CoreGraphics import *
def mouseEvent(type, posx, posy):
           theEvent = CGEventCreateMouseEvent(None, type, (posx,posy), kCGMouseButtonLeft)
           CGEventPost(kCGHIDEventTap, theEvent)
def mousemove(posx,posy):
           mouseEvent(kCGEventMouseMoved, posx,posy);
def mouseclickdn(posx,posy):
           mouseEvent(kCGEventLeftMouseDown, posx,posy);
def mouseclickup(posx,posy):
           mouseEvent(kCGEventLeftMouseUp, posx,posy);
def mousedrag(posx,posy):
           mouseEvent(kCGEventLeftMouseDragged, posx,posy);
ourEvent = CGEventCreate(None);
# Save current mouse position
currentpos=CGEventGetLocation(ourEvent);
# move mouse to upper left of screen
mouseclickdn(40, 60);
# drag icon to new location
mousedrag(60, 300);
# release mouse
mouseclickup(60, 300);
# necessary delay
time.sleep(1);
# return mouse to start positon
mouseclickdn(int(currentpos.x),int(currentpos.y));
For keystokes in AppleScript (which can be added to Automator with the Run Applescript Action) see: http://dougscripts.com/itunes/itinfo/keycodes.php

How to show mouse clicks when recording screen with quicktime?

How can i show the mouse click when i record the screen using quicktime player?

Why? What program feature do you intend to offer, by knowing what a user clicks on (besides the application itself).Hi, well what I have to do is to start the application minimized in the system tray. Then the application must be listening for crtl+shift+left click in any part of the desktop or an opened application, when that happens, I have to show a window asking if the user want to take a screenshot starting in the x,y point he clicked, once done, I have to take an screenshot...so on.
How can I do that? Can anybody give me a hint? Thanks in advance.

How to detect mouse clicks on desktop?

Hi All,
I need to detect mouse clicks on the desktop and find out mouse position on the screen. How to listen to mouse events if I don't have any swing components like containers, panels, windows, etc? All things like "addMouseListener" are supposed to be with such components. But my program is running in the background and it doesn't have any graphical interfaces. So, I need to detect if a mouse button is pressed at any position on the screen.
Thanks for any help!

Why? What program feature do you intend to offer, by knowing what a user clicks on (besides the application itself).Hi, well what I have to do is to start the application minimized in the system tray. Then the application must be listening for crtl+shift+left click in any part of the desktop or an opened application, when that happens, I have to show a window asking if the user want to take a screenshot starting in the x,y point he clicked, once done, I have to take an screenshot...so on.
How can I do that? Can anybody give me a hint? Thanks in advance.

How to handle mouse click event on up-arrow of JSpinner?

Hi Everybody,
I have a JSpinner component holding a date field in it (dd/mm/yyyy). I have handeled keyboard up and down arrow key events for the component and that's working as expected. Now I want to make it work for mouse clicks on the up (UP_ARROW_SUBCOMPONENT) and down arrow (DOWN_ARROW_SUBCOMPONENT) buttons of the component.
Could somebody guide me how to do it? My investigatoin hints me to use JSpinnerMouseEventData but I am not exactly getting how to get it done.
Thanks in advance!

if you just want to add a mouseListener to the spinner's buttons, try this
(only coded it for the up/next button)
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
class Testing
public void buildGUI()
    JSpinner spinner = new JSpinner(new SpinnerNumberModel(50, 0, 100, 5));
    spinner.setUI(new javax.swing.plaf.basic.BasicSpinnerUI(){
      protected Component createNextButton()
        Component c = super.createNextButton();
        c.addMouseListener(new MouseAdapter(){
          public void mousePressed(MouseEvent me){
            System.out.println("mousie, going up");
        return c;
    JFrame f = new JFrame();
    f.getContentPane().add(spinner);
    f.pack();
    f.setLocationRelativeTo(null);
    f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    f.setVisible(true);
public static void main(String[] args)
    SwingUtilities.invokeLater(new Runnable(){
      public void run(){
        new Testing().buildGUI();
}

How to detect mouse click event?

Hello,
I would like to have a vi to detect left, right and no mouse click. I mean that in the vi attached, Button2 should be 0 (no click), 1 (left c.) or 2 (right c.) depending on the event occured in i-1. cycle. My vi is the modyfied version of the one found here:
http://www.ni.com/example/27663/en/
Sometimes it works fine, but another time nothing happens when I click.
I think the main problem is with the execution times at the for loop and event structure.
Could you help me how to deal with the problem?
Thanks you!
Attachments:
mouse1.vi ‏12 KB

Hi VampireEmpire,
Your For loop iterates twice. If an event occures during first iteration everything is fine - Button 2 refreshes during second iteration. But what happens when an event occures during second iteration? Does Button 2 have a possibility to refresh?
1. Do you see the problem now?
2. And if you do - do you really need For loop? I would suggest you trying removing it and connecting shift register to the while loop.
Bluesheep

How to simulate mouse click

Hello,
is it possible to simulate and control a mouse click in windows with labview 7.1. I am able to control the mouse coordinates but not right and left mouse click. Is there a available VI that can do that?
Lukas

I have answered this in the other thread where you asked this. Please don't post the same questions to multiple threads.
After looking at the VI there, it uses the PostMessage function to post a mouse down message to a specific window. You can try using MouseEvent or SendInput to simulate a general mouse click (One of them is no longer supported, I can't remember which. You can find the details in the MSDN).
Try to take over the world!

How to disable mouse click ??

hi ,
i have a form in which i have a block abc in this there are 5 items say a,b,c,d,e
suppose my cursor is in item field 'a' there i have entered some value then i go to item field b and entered some value and then i go to field c without any enter or tab but with the help of mouse only. there i want to put a trigger on block level ( on-mouse-click) that whenever anyone tries to move from the current field to another field with the help of mouse then the cursor should be moved to previous item automatically that is item 'b'. in breif i want to disable mouse click from moving one field to another.
on-mouse-click i can store system.current_item i.e 'a' but not able to store previous field i.e 'b'.
please help....
thanks
Edited by: Hi FRNzzz!! on Feb 23, 2010 7:10 PM

Hello,
Try to set the mouse navigation limit form-level property to item when you want to disable the mouse.
Francois

How can I copy the titles from a project volume one use them for the rest?

I'm editing a four DVD set, and would like to use the same opening titles and credits for each. How can I copy the titles from volume one and use them for the rest? Thank you.

Open the project that has the titles you want to use. Select (highlight) all the title clips you want, then right-click and choose COPY.
Open the new project(s), then paste the titles onto the Timeline.
Done.
-DH

How to unbind mouse click 4&5 on firefox, because I use taht for an other software ?

Similar Messages

Maybe you are looking for