How to unblock the payment to the vendor , even though the lot will be get
Hi,
we receive the material from vendor . when store people unloaded, it was get broken.
so quality will reject the lot for the reason. but if we reject vendor will not get the payment
since this is not the vendor mistake. he expect for the payment.
how to unblock the payment to the vendor , even though the lot will be get reject .
Hi
Can you not make UD code as Partially accepted.
Put OK material in Unrestricted
For NOT oK material put into block stock.
From Block stock you can move to QRNT (Quarantine storage Location - 311 mvt type) or directly move to Unrestricted(mvt type 343)
Form here you can move material to Scrap by 551
This will give payment to vendor & Qty can be scrapped.
Similar Messages
-
I updated my IOS on my iPhone 4S and it locked up. I had to restore my phone and now iTunes will not go past the setup your phone screen even though the phone as been restored. How do I get iTunes to go past this screen so I can sync my phone again?
Depending on what iPhone you have when you get to the connect to wifi you should be able to activate your device over cellular data. Try doing a hard reset by holding the home circle button an power button until an apple pops up and the go through the setup again and when you get to the wifi part a option should be setup with cellular data iPhone 4 and above should give this option sometimes doesn't like showing up that's why u have to do a hard reset first
-
I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?
Once again, my thanks for your assistance. If I may impose on your generosity one more time, if I understand you correctly if I create a document on Word or WordPerfect, print it and scan it to create a pdf, the search function will not work. But, if I create the pdf document in Word the search function will work. Unfortunately, I am not sure how I create a pdf document in Word other than by printing it and scanning it. Could you please explain.
William B. Kohn, Esq.
General Counsel
Paul V. Profeta & Associates, Inc.
769 Northfield Avenue
Suite 250
West Orange, New Jersey 07052
(973) 325 - 1300
(973) 325 - 0376 (Facsimile)
[email protected]<mailto:[email protected]> -
I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account.
How can I change the setup so on the email only the iPad rings and on the phone number only the phone rings?No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that. -
My phone has been set up previously for itunes on my lap top but my phone now shows the connect to itunes message even though the phone is connected....Ive tried every thing I can think of ...now I cant use my phone ..please help ?
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo. -
I am having trouble activating the icloud on a friend's device. When I go to settings, it tells me it cannot verify the email even though the Apple ID and password are correct... Help!
Try signing out of the ID, restart the iPad, sign in again and then try again.
Settings>iTunes & App Stores>Apple ID>Tap the ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
No oveclocking the PM8PM-V (MS-7222) even though the manual says yes.
Hello
I have a New PM8PM-V with Intel Pentium D 840 3.2 CPU.
The system has the latest BIOS and drivers, via live update...
The systems works great and I have no issues, with running my apps, but here is the issue.
I bought this Mobo because the manual stated it can be overclocked. The BIOS does not support any over clocking at all, so I tried the utility that came with the mobo
I tried
V-Center
Core Center
Dual Core Center
the software installs fine, but when i try and run it, I get a message that says "MOTHER BOARD NOT SUPPORTED"
When I look at the included text file, the mobo (MS-7222) is NOT listed in the file as supported
I got these utilities files from the PM8PM download area on MSI site, so these are utilies that are made for the mobo, yet they say they are not supported.
I download the ones from here
http://www.msi-korea.co.kr/program/support/utility/utility_detail.php?serials=177&uid=PM8PM-V&part=1
I also tried the newer version located here
http://www.msi.com.tw/program/support/software/swr/spt_swr_list.php?kind=1
When I run V-Center it pops up and then closed
When I run Core Center or Dual Core Center I get the Mono not supported error.
I really need to overclock this mobo, so is there any other utility that supports this motherboard and PLL chip?What exacly does the manual say/state for overclocking an how (via bios , via application or what)
Could you quote what it states .
An option is always to load the initial bios version ( this if often what the manual is based on) .
Though to do this you have to flash bios manually (not liveupdate) with initial/first bios version downloaded from the boards bios page. -
On my iPhone4, when I hit the Mail Icon I come up with a blank screen, though the Icon shows 182 unread emails waiting to be viewed. I uninstalled my mail accounts, and then re-installed them with no success. Other apps work fine
On my iPhone4, when I hit the Mail Icon I come up with a blank screen, though the Icon shows 182 unread emails waiting to be viewed. I uninstalled my mail accounts, and then re-installed them with no success. Other apps work fine
-
Why does the amber light stay on even though the WiFi works?
My WIFi just stopped yesterday.
Initially nothing worked. I then Restarted the router—then the Airport Extreme–NOTHING. I called Apple support. He had me push the re-start button and a few other things. I can now get on WIFi, but the amber light still stays on. Why? Although my Mac works great, my iPhone doesn't.
Any ideas?I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work. So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.
-
After 6 hrs. Of upgrading to 5.1 iOS , and reloading all data my music will not play. The music was reloaded from iCloud, and shows up in library, but will not play.
Basics from the manual are restrt, reset, restore.
Have you tried each of these? -
The Itunes and Iphone just did the complete new update addiing on Icloud and new applications. After all was done and it said all was completed - the Icloud icon is not on my iphone screen anywhere nor is it on my computer after I did go to the control panel and set up. I tried repairing the download and it said all was fine. What needs to be done to get this all to work.
Hi there,
Thanks for the reply. I did think that could be the case but then other books would also show up as apps on phone but not counted as an app. Maybe book apps downloaded from the app store work in this way whereas books bought from the ibooks app show in ibooks and not as apps.
I guess that would make sense, it must be because they are books but downloaded from the app store rather than the book store so they are visible as an app but don't actually get counted as an app.
Would you think that's the case too?
Thanks
Adam -
I've forgotten the answer to my secret questions and my account is locked I can't purchase anything, and I've clicked reset and apple website says they've sent me an email but I haven't recieved anything in my inbox!! Help!! I don't know what to do I've tried more than 10 times
Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue. -
I'm running v3.6.11 & am using Yahoo! Mail (sbcglobal.net). When I click on an eMail in my Inbox to load the full eMail message, the message does NOT load but the 'status' in the lower left hand corner of the webpage indicates 'Done.'
This is a similar problem to the page not loading that I've seen in the Support ForumOdd.
Before taking your last suggest I "tested" to see if the problem still existed and it has gone away.
I've not changed any settings.
(Can't remember if the problem is on my work computer or home computer. I'll test the home computer later today.)
Mark -
What is the solution to problem renting movie through itunes on apple TV when payment verification not accepted even though the bank authorizes the payment?
If you are also getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Maybe you are looking for
-
ITunes wiped clean on computer and iPod how do I get my music back?
I just did the iOS 5.1 system update for the ipod. It told me it will restore my ipod and I was okay with that. But when it was finished I went to my iTunes on my computer (iMac) and there is absolutly no music. There are no music files on my compute
-
Hello, To delete a user's PAB, it can be done using the Admin Console. To delete 50,000 users PAB, i think it is inefficient to use Admin Console. Is there any available command line to do it? the servers we're using are: NDS 4.12 IMS 5.0 P2 Thanks!
-
How to attach a .pld file in oracle Designer
When we try to generate a form out of designer we are getting the error ilke sample.pld file is required. The Questions on it are, 1. What is a .pld file in a designer mean. 2. How to attach a .pld file in oracle designer for the generation of forms.
-
Country based currency & decimals issue
Hi All, Can any one help me here, I need to decide the decimal places for particular currency of a country accordingly I need to add the decimal places. Example: JPY: Japan yens dont have a decimal place INR will have 2 decimal places.
-
Hi Gurus, Scenerion is after production order confirmation serial no is updated and shows in stock. but now the problem is that in system no relation has maintained between stock and serial no e.g stock is 550 no then serial nos are show