How to uncheck the hide field in extract structure.
Hello All,
I have enhanced (Appended) a field ZZVATREC to a generic data source created for billing data(A View). This field is as hide field in the extract structure.I am able to unhide the field in change mode but when saving an error is comming like still errors in OLTP source system.
This field is I want to populate by coding and done proper coding also.
I have tried with Roosfield table. but I did am unable to see my appended field in roosfield table for the datasource.
In Rsa3 this field is populated.
Could anyone help me to solve this issue.
Regards
Hi Nivas,
The probable reason could be that the feild being appended is either a quantiy or currency feild and hence the definition of the append is not complete.
This requires to mention the currency or unit refernce and then would you be able to unhide.
There are amny posts for this topic in this forum.
Try searchin it, if you have any difficulty making hte change.
Naveen.A
Similar Messages
-
How to uncheck the hide field if it is grayed out?
Hi,
I have added a field in the datasource definition by changing FM logic and adding extra field in extract structure for generic extraction.
The check box is checked in the hide column against the newly added field in RSA6 transsaction for the datasource and it is grayed out!
how to uncheck that check box? i don't want that field to be hidden!
Thanks,
RaviHi Ravi ,
Go to RSA6 and go into edit mode by selecting the datsource , you should be able to uncheck them ,
i believe you are trying in RSO2 itself , Activate your datsource in RSO2 , Navigate to RSA6 and try in edit mode , it should work ,
thanks,
sathya -
How to add the date field in the dso and info cube
Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KKmy prob is solved
KK -
How to insert the new field to standard scheduling agreement script form.
Hi Gurus,
how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
The below one is my requirement,
ex:- Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified
document date (field EKPO-AEDAT).
Thanks & Regards
chinnuopen TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
se71--->
&<str. name>-AEDAT& -
Sequence mySequence = myEngine.NewSequence();
mySequence.Name = "myAction";
//Create new step of type Action and set Name
Step mystep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname, StepTypes.StepType_Action);
mystep.Name = "GetStringObject";
//Obtain the code module from the step
DotNetModule myModule = mystep.Module as DotNetModule;
//Set properties of the module
myModule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File, @"C:\Documents and Settings\My Documents\Visual Studio 2005\Projects\HelperClass\HelperClass\bin\Debug\HelperClass.dll");
myModule.ClassName = "Class1";
myModule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
myModule.MemberName = "StringObject";
mySequence.InsertStep(mystep, 0, StepGroups.StepGroup_Setup);
mySequence.Locals.NewSubProperty("StringObject", PropertyValueTypes.PropValType_Reference, false, "", 0);
DotNetParameterDirections reference = mySequence.Locals as DotNetParameterDirections;
mySequence.Locals.GetPropertyObject("StringObject", 0);
myModule.ClassReference = "Locals.StringObject";
myModule.LoadPrototypeFromMetadataToken(385875969, 0);
After this I am not able to proceed.herewith attached documents contain screenshot of teststand file marked red is to be solved. How to define the value field of the return parameters?
Attachments:
HelperClass.cs 1 KB
ex1.gif 2305 KBPlease see my answer to your question on page two of the following forum thread:
Programmatically generating DotNet Steps in TestStand
Manooch H.
National Instruments -
How to populate the TEXT field in MIGO
Hi folks,
While creating material document in MIGO or MB01, i am inserting some data in TEXT ( Field in line item level ). This text data is disappearing , once mat doc is created.
how to populate the TEXT field in MIGO?Is there any cusomisation?it's urgent .
Regards
pabiHello Pabitra,
I had a similar issue in my Project.
Please verify if the SMOD enhancement MBCF0002 (EXIT_SAPMM07M_001) is active in your system.
If this is the case, verify from two angles:
a) Whether the Enhancement was accidentally activated - If yes, then De-activate the same
b) If there is some logic coded in the User Exit, but, the Text is somehow not determined...even the existing content in the text field (input to EXIT_SAPMM07M_001) will get vanished.
Hope that your problem will be resolved by this. Pls reward points.
With Regards
Vijay Gajavalli -
In BSP how to give the input field as mandatory?
Hi friends,
In BSP how to give the input field as mandatory?
In BSP i want to validate the input field (example checking the material no is valid or not)
if this material no doesnot exit means i want to pass error message.What is the code for that.
Moosahi
try this
in LAYOUT
<htmlb:inputField id = "vname" disabled = "False" value = "<%= v_visitor %>"/> <font color="red" size="2"><b><%= page->messages->assert_message( 'vname' ) %></b></font></td>
in DO_HANDLE_EVENT
in oninputprocessing
CLASS CL_HTMLB_MANAGER DEFINITION LOAD.
IF event_id = CL_HTMLB_MANAGER=>EVENT_ID.
DATA: event TYPE REF TO CL_HTMLB_EVENT.
event = CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
DATA: button_event TYPE REF TO CL_HTMLB_EVENT_BUTTON.
button_event ?= event.
ENDIF.
case event->id.
when 'select'.
if v_visitor = ''.
page->messages->add_message(
condition = 'vname'
message = 'Visitor Name can not be blank'
severity = page->messages->CO_SEVERITY_ERROR ).
ELSE.
here u can write ur when ur field getting filled
endif.
endcase.
endif.
give marks if it is helpful
thanks -
How to find the Databse field used in which Transaction
Hi,
I have one query about:
How to find the particular field from the Database table, used in which transaction?
Bottomline: I want to find the LIKP- LIFEX field, used in which Transaction. I know it is related to inbound delivery, but i couldn't find it in which transaction it is.
Thanks in advance.
Jai.Hi Jai,
The field is called External ID which equal to LIKP-LIFEX or RV50A-VERUR_LA (structure).
Path:
Goto -> Header -> Administration -> External ID.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
How to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?
Hi,
how to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?
Rg,
KarthikHi Kamal,
This note steps will no validation that the user actually enters a value and the message will be created even if this 'required field' is left blank.
Any other way to validate the enter a value also?
Rg,
Karthik -
How to pass the FORM Fields value by Form Personalization
Hi ALL,
I want to pass form filds values in to procedure. I am calling this procedure through form personalization of that form..... But it's not accepting any form field's value there... when i am passing hardcoded vales procedure is executing fine...
can any one suggest what to do???
i tried with these syntax
TEST_EMP_FP(:ADDR.ADDRESS_ID,'ABC')
TEST_EMP_FP(${item.ADDR.ADDRESS_ID.value},'ABC')
Regards
RaviHi,
Iam calling an SRS from forms personlization. Can any body tell me how to pass the Form field values as parameters to the Reports. (Example when they call this Concurrent request from Transact5ions screen, The invoice number should be defaulted in the report parameter).
Regards,,
Anil. -
How to color the mandatory fields in a Adobe WebDynpro Java form
Hi Experts,
How to color the mandatory fields in a Adobe WebDynpro Java form?
This will avoid any confusion to he end user while filling the form as he would try to type something in field which is set as Read nlybut stil the cursor appears there.
Regards,
ShobhitHi Shobhit,
you can write something like xfa.host.setFocus(<text field name>). to set the focus or
<text field name>.fillColor = "120,120,123";
<text field name>.resolveNode"ui.#textEdit").border.edge.fill.color.value="120,150.200";
to fill the color.
Refer to adobe dev centger scripting samples to learn more on these.
Hope these helps.
Thanks and Regards,
- anto. -
How to validate the mandatory fields in the view in WDA?
Dear experts,
Iam new to WDA. i just want to know how to validate the mandatory fields in the view in WDA?please refer any documents for validating the mandatory fields.
Regards,
murthy.
Edited by: Murthy Ganti on Jul 13, 2009 2:31 PMHi,
Firstly goto view->select the element that you want to make mandatory and set the State property to required.
Secondly place the below code in the WDDOBEFOREACTION
DATA: l_view_controller TYPE REF TO if_wd_view_controller.
* Get view controller
l_view_controller = wd_this->wd_get_api( ).
* Check for mandatory attribute
cl_wd_dynamic_tool=>check_mandatory_attr_on_view(
EXPORTING view_controller = l_view_controller
display_messages = abap_true
Regards,
Radhika. -
How to set the data fields column wide at sqlplus
Dear Sir/Madam
I would like to know how to set the data fields column wide at sqlplus
Thanks
Francissee
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch6.htm#sthref1131
and the FORMAT clause of the COLUMN command in
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12013.htm#BACHCABF -
How to increase the DFF fields length
Hi Gurus,
its very urgent requirement ,how to increase the dff field length in standard page i.e self-service appraisal page,please help me
Regards,
SreeniHi Ayaz/Sreese,
As per my requirement user enable the DFF Fields in perticuler pages in sshr module like PMS So ...i create the attribute columns and viewinstance through personlization create the column and i give the hight and lenght in column cration time i create the id like "XXApr" same id name i gave in DFF Field Names.....so i did like ....this is my approch.....
---u have any doubts fell free to post the mail..i fwd through screen shots then only u undershood ,([email protected])
Regards,
Srinivas -
How to remove the mandatory field setting in output control
Hi everybody,
While printing a Payment Voucher through F-58 and FBZ5(reprint), there are two output devices, the first one is - printer for forms and second is - payment advice printer.
In our case we have configured the cheque printing and payment voucher printing seperately. The cheque goes to first printer(kept mandatory field) and the payment voucher goes to second printer. One of our plant does not print the cheque from SAP, they only print the payment voucher because the cheque is manually prepared. How do I avoid the cheque printing. Is there any way out to print only the payment voucher through F-58 and FBZ5
Please guide me how to tackle it or how to remove the mandatory field setting in the output control screen?
Regards
PaulHi
As of my understanding, there is no relation ship between the Sales Organization and this mandatory partner function.
Here are few suggestions.
1. Since Partner functions are defualted and made mandatory in the Partner Determination Procedure so you have to remove this Mandatory option for PE from the Partner Determination Procedure that is AG if using standard one.
2. If you are using a single partner function than , Copy and create a New partner procedure and a new account group . Where in one you can default PE as mandatory and in another one you make a optional where it can be choosen manually while creating the customer.
Follow the path to check for entries :
SPRO > sales & distribution > Basic Function > Partner Determination > set up partner determination > select for customer master > select the partner procedure you are using AG as standard > then partner function in procedure > here maintian the check as required like, Mandatory or No check for Non Mandatory .
Thanks
RB
Maybe you are looking for
-
How do i setup a POP gmail account on my iphone
Our work uses a gmail account that a company sends emails to and multiple users look at this account with there phones. We all need to be notified when an email comes, but when one person opens it all the phones sync and everyone else loses the notif
-
I am a QA & ISO Compliance professional with no knowledge and experience in SAP, but i am looking forward to become a SAP professional. Based on my experience with ISO 14001 (Environment Management) & ISO 50001 (Energy Management) i am interested in
-
Never mind - got it figured out at this forum: change language adobe acrobat pro XI (Installation & updates)
-
PDF document on iWeb page - Can't get hyperlinks to work
I have dragged a .pdf file which contains working hyperlinks onto my iWeb page. The .pdf file displays properly but the hyperlinks are inactive. Is there a way to make them work? I do not wish to use an iFrame because I don't want the clickable links
-
Coding Concurrent Programs in Pro*C
If I have a pro*c program like this: #include <stdio.h> #include <string.h> #include <stdlib.h> #include "sqlca.h" #include "sqlcpr.h" EXEC SQL BEGIN DECLARE SECTION; VARCHAR username[20]; VARCHAR password[20]; EXEC SQL END DECLARE SECTION;