How to undelete an inforecord ...pls help???

how to undelete an inforecord ...pls help???

Hi,
Use Tcode ME15.
Give the material , Vendor , Purcahse Organization,.
If it is to be undeleted at Plant level give the Plant details adn excute.
Uncheck and Save.
Regards
Give point if useful

Similar Messages

How to solve this problem, pls help when I try to see remote camera system from home."Dual streaming is required for HTML viewing"

How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"

I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig

I recently bought a mac book pro sept 2011 and i don't know how to reset my ichat pls help am new to the mac n i feel lost

i recently bought my mac book pro this month and iam stuck with ichat i want to reset it and i dont know how to
pls help me am new to mac

HI,
Welcome to the  Support Communities
It really depends on what you have done so far.
The Simplest is to open iChat go the word iChat in the Menu Bar (Drop Down Menu)
Select Preferences.
In there select Accounts.
Highlight any account in the list you no longer want (you can't delete the Bonjour one)
Once highlighted press the minus button at the bottom of the list.
6:24 PM Monday; September 26, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Im my lap has hard disk problem,how to resolve the problem,pls help me...

Hello,
           I have hp pavilion dv4 lap,in this lap has some hard disk problem,when i am turn on the lap that screen shows this message "The smart hard disk check has detected an imminent failure.To ensure not data loss,please backup the content immediately and run the hard disk test in system diagnostics".
           After that i was diagnostics the system but no changes in the lap,,again again lap shows hard disk error(301).
           Then i am chosen the enter option to start up the lap it take long time for openning the windows,after enter the windows that also shows about the hard disk error in within few minitues,
           What can i do?
           This lap bought at 12-oct-2012 from malasiya,now im in tamil nadu,how to solve the problem please help me.

Hello srhk. Thank you for posting on the HP Forums.
I understand the hard disk is experiencing issues. Error 301 indicates the hard disk possesses a hardware defect. I would contact HP Phone Support for assistance, or purchase an equivalent hard disk.
If you choose to contact HP, their options will be based on the warranty status of the computer. If you do not have this information, you can locate it at this website: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1384280905804.876444892.199480...
You can utilize this website to learn how to contact HP appropriately, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

How To Configure Oracle Jinitiator---- pls help

I installed jinitiator it installed succefully but when i run my forms9i ie explorer
show some message about certificate this contenct cannot be verify pls help me to setup
jinitiator thnxxxxx

Hi,
Which version of JInit you are using? Have you signed jar files that you are using?

HELP! I want to reinstall my iMacG5, but I lost the original OS disc, how can i do? pls Help!!!

I want to reinstall my iMacG5,
but I lost the original OS disc,
how can i do? pls He!!!

With the kernel panic your Mac is suffering I would suggest that once you get the DVD for your Mac that you boot with the first one in the set in your Mac with the D key depressed. This will start AHT. It will test your hardware. Kernel panic are generally caused by hardware problems.
Allan

My Mac Book got stolen..how do i track..pls help

My MAC BOOK is stolen and i want to know if there is any way i can track my laptop or find its location..I dont know if i have downloaded FIND MY IPHONE app on my MAC book...I do have it on my Iphone....help pls

wirkebau wrote:
My house was broken into, and my macbook pro was one of the items stolen. How do I turn "off" itunes on this computer, so the theif cannot access my music
You cannot.
Make sure your change your AppleID password (and anuy other passwords you had on that computer).
and also so that I can use my new computer when I get it?
Just restore your data onto the new computer from the most currsent backup of the stolen computer.

I have ios 6.1.3 but i need version 5.0.1 how to do it? pls help

i have ios 6.1.3 but i need version 5.0.1 how to do it??

Downgrading to a previous version of iOS is not supported.

How To Work With Jtree Pls Help

I heared about JTree but dont have idea to use it in form6i where i can get
help or sample form can i use jtree in forms 6i

JTree is a Java component - do you really mean JTree or do you just want to use the Forms Tree control.
You'd need to check out the documentation on Java Beans in Forms which is on otn.oracle.com/products/forms
For JTree documentation try googling...we don't have a JTree example on OTN that I am aware of.
Regrads
Grant

How to buy ps+ ? pls help

To buy ps+ with credit card should i have founds in my SEN wallet ?because every time i try to buy ps+ it say error

The question is confusing, I translate it as: "Do I need funds in my wallet to buy PS+ with a credit card?". Yes, you can also buy it with an added credit card which is what I did. Or you can do it as described by the previous poster. Actually, it should tell you exactly what to do if you click on the subscription of your choice.

Hiii, i have m rows & n columns in my table..how to convert it into m columns & n rowa by using sql..pls help me...thanks.

hiii,
I have a table which has 14 rows & 8 cols.
I want covert it into 14 cols & 8 rows,
by using sql how to do it..pls help me.

Oracle Database Search Results: pivot

Urgent Pls Help Me

I am using the reports 6i and running it on web in excel format and pdf format.
I want to highlight a particular row with some color based on some condition on of the column
how do i do this, pls help me
Vinod

Bear in mind that your 'Excel' format is really just delimited data and a pure ASCII file, which doesn't support the type of highlighting that you're requesting.
In 9i you can use jsp technology to embed reports data directly into an Excel spreadsheet. In this case you could probably also include either an Excel macro, or execute some java code that highlighted the appropriate row/values.
There's an example of this jsp approach available on the demos page available at http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
Hope this helps,
Danny

Stored proc execution status, pls help

hi,
i need to know if there is a way to find out whether an sp has been executed successfully or not, with the status code being returned.
i know about the dbms_output.getline() function but i don't know how to use it!
pls help
thank you

Hi,
do you mean something like that ?
SQL> create or replace procedure getData(id in number)
2 is
3   status number;
4 begin
5   select count(1) into status from emp where empno = id;
6   if status > 0 then
7     dbms_output.put_line('Success');
8   else
9     dbms_output.put_line('Failed');
10   end if;
11 end;
12 /
&nbsp
Procedure created.
&nbsp
SQL> set serveroutput on
SQL> exec getData(1)
Failed
&nbsp
PL/SQL procedure successfully completed.
&nbsp
SQL> exec getData(7369)
Success
&nbsp
PL/SQL procedure successfully completed.
&nbspRgds.

Pls Help...Refreshing of JTable

Hii,
I am represinging data from database in JTable.I want it get refreshed and represent updated data.How can i do that
Pls help me if u can
Thanx
Your Friend

Hi,
if your data model is a subclass of AbstractTableModel simply fireTableDataChanged() after you have updated your model - JTable is a table model listener to its model and will update its view accordingly. There are more fire.... methods in AbstractTableModel, choose that one, that reflects your changes best in order to avoid too much repaint action.
greetings Marsian

Javac?? pls help me

how can i use javac in the cmd? i dont know how to install it.. pls help me

Sun Tutorial covers how to write a "HelloWorld" type program. It starts with a couple of links: to the download site, and to a page giving installation instructions.

How to undelete an inforecord ...pls help???

Similar Messages

Maybe you are looking for