How to undeploy sda/sca from PI 7.1 ?

Dear SAP colleagues,
I am looking a tool to undeploy sda and sca file from PI 7.1 system.
From PI 7.0 or any SAP NW until 7.02, there is SDM.
SDM does not exist any longer from SAP NW 7.1.
Thanks for your input.
Best regards
SAP NetWeaverAdmin

Hello
Please see the link below.
WEBAS 7.10 How to undeploy with JSPM
Cheers!
Javed

Similar Messages

  • Netweaver CE : How to undeploy an DC from the CE portal

    Hi,
    Please let me know how to undeploy an DC from the CE portal
    Regards,
    Thulasi

    Hi Thulasi,
    For undeploying use following URL,
    Please note for this you haveto first log on to portal using admin
    http://<server host name>:<port>/irj/servlet/prt/portal/com.sap.portal.runtime.system.console.default
    In "Archive Remover" section select your DC and click on clean, this will undeploy your DC from portal.
    Regards,
    Ameya

  • Error when I am trying to export a SDA/SCA from CTS+

    Hi,
    We have configured NWDI and using CTS+ for transports.  We are using the DI CM Services concept. So we didn't create any Tracks in CMS.
    When I am trying to create an export from CTS+ system -> Development Configuration-> DI Export Services -> SCA / SDA export.
    In this wizard it is successfully running 3 steps., but in 4th step (CTS Request), when it is supposed to generate the Transport request using the transport organizer, it is giving the following message.
    Error during read of Transport Organizer URL for system 'EPD' and user 'ABC': !NO_DEST_DETAILS_CHECK_STACKTRACE
    Error during read of transport request for system 'EPD' and user 'ABC': !NO_DEST_DETAILS_CHECK_STACKTRACE!
    I tried to find some info in the application log file but did not find much information except couples of line below.
    #1.#0019B9C3EE7C006500003FD0000007E500047FFB5C5B95BE#1266617469867#/Applications/DI/Export#sap.com/tcdictsconfigservice~appl#com.sap.di.cts.export.service.core.DIExportServiceBean.getDefaultRequest#ABC#44454##smp.com_SMP_519331850#ABC#a3cf42441da311dfac9d0019b9c3ee7c#SAPEngine_Application_Thread[impl:3]_21##0#0#Info#1#com.sap.di.cts.export.service.core.DIExportServiceBean#Plain###Failure: Error during read of transport request for system 'EPD' and user 'ABC': !NO_DEST_DETAILS_CHECK_STACKTRACE!#
    I really appreciate, if some one can help.
    Thanks,
    Ramu J

    Hello Ramu
    I see that you have not been able to find a solution for this.
    Can you provide some more information which may help the other SDN posters to assist you?
    Thanks
    Kenny

  • How to undeploy BPM application from Weblogic server

    Hi everyone,
    I try to undeploy some bpm application on the weblogic, using the weblogic admin console, under the deployments section, check the bpm application and click the delete button, however, when the server restart, I still see the soa server loading the bpm application, what is the correct way to uninstall the bpm application?
    Please advise.

    Hi
    Its preferable and better to use em (enterprise manager console) to UnDeploy any SOA/BPEL applications. Infact this may be the only way you should undeploy. The reason is when you undeploy from EM console, first of all it removes all the instances from the SOA_INFRA database also and also from the deployed-composites under the soa domain root folder.
    Em Console URL: http://yourhost:yourport/em and use the same username/pwd that you use for normal admin console.
    If you still see the composites, check the deployed-composites folder under the domain root folder. And delete from there. Note that, all the SOA/BPEL composites are stored in the soa_infra database also.
    Thanks
    Ravi Jegga

  • How to undeploy .sca files in pi 7.1

    Hi,
    How to undeploy .sca files (archives) in pi 7.1 system (710 version)

    Hi Vinay
    In 7.1 you will not get sdm and JSPM doesn't give you option to undeploy.
    So ,you need to user NWDS or NWDI.
    Pls check this link http://help.sap.com/search/highlightContent.jsp which describes how to do it from NWDS.
    If you have NWDI installed you can use that also.
    Check on help.sap.com for more information
    Regards
    Ajay
    Edited by: Ajay Sandal on Mar 17, 2009 7:38 PM

  • How to undeploy an .sda file through command line

    Hi,
    How to undeploy an .sda file through command line.send me the related command to do it.and related information and links.

    Hi
    Please find below the steps to undeploy thro command line :
    Shut down the sdm server
    1)SDM shutdown "sdmhome=D:\usr\sap\J2E\JCO1\SDM\program" "sdmguiport=50018" "sdmhostname=<hostname>" password="<password>" "shutdownmode=abort"
    2)sdm jstartup "mode=standalone" "sdmhome=c:\usr\sap\J2E\DVEBMGS00\SDM\program"
    3) sdm undeploy "sdmhome=D:\usr\sap\J2E\DVEBMGS00\SDM\program" "compname=c:\test.sda"
    4)sdm jstartup "mode=integrated" "sdmhome=c:\usr\sap\J2E\DVEBMGS00\SDM\program"
    5)start the sdm server again
    SDM server "sdmhome=D:\usr\sap\J2E\JCO1\SDM\program"
    Hope this helps. do not forget to reward points
    regards
    rajeshkr

  • Bic Mapíng Designer - There is not SDA/SCA number for this projects

    Hi!!
    Some one help me please
    I don't can see the option Build / Assign SDA/SCA projects
    I modified the file bic_mapping_designer.ini with this line CmdLnArg4=ProjectAdmin, but i still can not see the option.
    Regards

    This was fixed by undeploying from the SDM instead of from Visual Admin.  Good to go now

  • How to undeploy java-components?

    Hello! I have problem with undeployment java-components. My process server0 is grey. In my previous post I've got recommendations to redeploy java-components. But "how?" I don't know. I try to use SDM GUI and it suggests for me many services. Maybe somebody hint me which services I must kill and what component of SCA include this services. Especially I want to know which SCA (component/service) is responsible for server0 process.
    Regards, Artem Ivashkin

    if i understood right
    you want to undeploy some xyz.sca from the the AS JAVA.
    1. go to system info page
        http://host>:<port>/sap/monitoring/ComponentInfo
    2. note down the DC name which you want to undeploy by searching xyz.sca
    ex:
    sap.com  com.sap.portal.activityreport.db  null (61919.20061025163630.0000)  SAP AG  SAP AG  20070207113306  sap.com/EP-PSERV 
    sap.com  com.sap.portal.connectors.ws  null (6.19019.20061005124622.0000)  SAP AG  SAP AG  20070207112511  sap.com/EP-PSERV 
    now you know the DC which you want to undeploy from xyz.sca
    3. use sdm, go to undeploy tab, undeploy it one by one or you can select them all....Ctrl key...
    Regards
    Shridhar Gowda

  • How to extract SDA file..........

    Hi All
        how do we extract SDA files.......
        we started adapter development by testing sample code in 'sample_ra.jar'  file,  available in sample_ra.sda, and deployed on XI server. now we want to see all jar files available in 'sample_ra.sda'.
    if any one already gone through adapter development have any idea, how to extract SDA file, help me out Pls .......... very urgent.
    Regards
    Rajesh

    HI,
    In general SDA files are to be deployed into Server using SDM.
    see the below link , how to deploy
    http://help.sap.com/saphelp_webas630/helpdata/en/05/4fac3e00c8b014e10000000a114084/content.htm
    Also
    you can unzip the file with WinZip or WinRar edit the xml configuration file and zip it back together (in ZIP format and not RAR!).
    Also
    how to deploy ear files from command line
    Tools like zipgenius http://www.zipgenius.it/intweb/features.htm#Innovazione, Private encryptor http://www.filesweb.com/private-encryptor/ and securefile http://www.devsolutions.net/htmlpages/securefile.html should help you further.
    Regards
    Chilla

  • Import/Export SCA from NWDS/NWDI

    Hi,
    Someone could support me during export SCA component from NWDS?
    I have following configurations:
    Installed NWDS, done configuration development by import from SLD (track_DEV, without track_CONS). In preferences NWDS "System Landscape Directory" is set up with http://host:port. Ping passed.
    Then when NWDS asking me to enter login credentials, everything passed ok, and in "Development infrastructure" perspective on the left in components browser I can see list of software components.
    I have to export SCA from existing portal to file system, then developing, next - import back to portal. So, when I select "Export" from menu I got message " Nothing to build/export: No DC sources available on local file system". Sorry, I'm not developer, but I have to do this. NWDI architecture is little complicated.
    It is possible describe this in few simply steps?
    thanks

    Hi,
    Please go through the below blog:
    How to Export/Import and activate .sca files in SAP Composition Environment - CE local development
    Hope this helps!!!
    BR,
    Anurag

  • SCA from an EAR file

    Hello!
    I have a simple question about the sapmake utility. I have used to create an SCA from various archives and am familiar with its workings.
    What I want to know is that is it possible to create an SCA from an EAR file. I have created an SCA from an EPA and an EAR file but I want to create an SCA from an EAR.
    Theoritically this should be possible because an EAR is considered to be an SDA. Since an SCA is used to pack multiple or a single SDA(s), it should be possible to create a valid SCA out of an EAR.
    But when I tried it, the SCA build process went perfectly and I did get an SCA. The JSPM however, does not recognize this SCA at all! It says the inbox is completely empty. However, when I pack in the EAR with an EPA coverted to SDA and create an SCA, this SCA is immediately recognised.
    So why cant I create a valid SCA from only an EAR file?
    Thanks for looking into it!
    Sameer

    Hello Praveen!
    The EAR file is considered to be an SDA by NetWeaver. This is the reason that you can add an EAR file when deploying from the SDM tool even though the button in the deployment says "Add SDA/SCA for deployment".
    Bye!
    Sameer.
    P.S - Here is the link to one weblog which explains it - <u>Software Deployment/Component Archive Basics>.
    Added the link.
    Message was edited by:
            Sameer Jagirdar

  • How to undeploy dictionary projects?

    Hello!
    Does anybody know how to undeploy the Dictionary-Projects generated by the CAF-Framework?
    When I undeploy this dictionary do I also delete all associated entity-Data and schemes in the Database?
    Thank´s for your help.
    Jörg

    Hello Austin!
    Unfortunately that does not work. I also tried that before. Anyway it is a little bit mysterious. When you choose the undeployment tab without selecting the Deployment-Tab before you cannot see any Dictionary-project. But if you choose the deployment tab at first and then the undeployment tab then you can also see the Dictionary projects. But when you select (button select) one of them it is not shown in the right window that shows the the SDA for undeployment. That´s not good.
    Possibly I do something wrong?
    Best regards,
    Jörg

  • How do I install windows from USB on Macbook pro 3,1

    How do I install windows from USB on Macbook pro 3,1 ?
    My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
    - My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
    I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
    Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
    Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
    After rEFIt I booted and then I got this error:
    Starting bootmgr.efi
    Error: Unsupported while loading bootmgr.efi
    I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
    Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
    Point: Nothing is wrong with the windows software, and windows runs fine.
    I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
    Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
    Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
    rEFIt - Booting Legacy OS
    Starting legacy loader
    Using load option ´USB´
    Error: Not found returned from legacy loader
    Error: Not found from LocateDevicePath
    (x 9 times)
    Error: Load Error while (re)opening our installation volume
    The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
    (Hey Apple please send out a updated firmware that fix this issue?!)
    So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ?  Or just run windows on the mac and forget about mac software ? What a stupid solution...

    There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
    This is 5 page thread, so a little more 'meat' to it:
    https://discussions.apple.com/thread/3410900?start=60&tstart=0
    And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
    What you have here seems to be everything and everyone is excluded unless there is a  mac-model device ID string that specifies yes.  An unnecessary hurdle.

  • How to get the values from popup window to mainwindow

    HI all,
       I want to get the details from popup window.
          i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
       now i am able to display popup window with values.How to get the values from popup window now.
       I can anybody explain me clearly.
    Thanks&Regards
    kranthi

    Hi Kranthi,
    Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
    Regards,
    Uday

  • In alv report , how to reserve 20 lines from beginning of page

    hi experts
    in alv report , how to reserve 20 lines from beginning of page.
    regards
    subhasis.

    If by reserve you mean should not move on scrolling then make them KEY from fieldcatalog.
    But I think maximum of 10-12 can be handled by that.
    Regards,
    Amit
    Reward all helpful replies.

Maybe you are looking for