How to understand the "New Item" icon at the bottom of the Project window
I'm trying to understand that small "New Item" box at the bottom of the project window better. I'm aware that when I bring video clips into my project, if I drag them to this box, PPCS5 will add them to the timeline. I partially understand the positive reasons for doing so, primarily that PPCS5 will correctly identify the type of video being brought into the project. I know that if I select all my clips and drag them to the new item box, that all my clips will be added to the timeline at the same time and all together on the timeline. There are many things I don't understand about it. If I add my clips one by one using the "New Item" icon, they will show up as separate sequences on the timeline. If you try to add another clip at a later time, can that clip not be added using the "New Item" box? One other question is what would be the advantage in putting clips on the timeline as separate sequences? And one further question is do you drag other items to this box besides video clips? Like music, and still images?
Dragging something to the New Item icon doesn't just add that something to a sequence. It actually creates the correct sequence for the something to be added to.
You do this once, when you need a new sequence. Anything else you want to add to that sequence you do by other means.
Similar Messages
-
Hi all,
when I add an item to a region I can see the new item icon. In some cases the icon appears on the right of the item, in other cases it appears down the item.
Is it possible to set the alignment of "new item" icon?
thanks
MarcoHi Marco -
If you go the region properties (click the pencil icon on the region) on the attributes/style tab, the attributes section allows you to specify the order the attributes are shown in. The "New Item Indicator" is the attribute that you will want to shuffle the position in the selected attributes to put it in the same place in all region.
Hope this helps,
Candace -
In Premiere Pro CS6 (Mac) you could drag a clip to the 'New Item' icon to automatically set it's preset.
However, when using Prmiere Pro CC (PC) I am not seeing that icon. How can one automatically set the preset as with the Mac?
Many thanks!Many thanks. No Sir, it is not there, it is significantly expanded. Right-clicking on any of the clips does not afford me that opportunity either....I'm clearly missing something but am at a loss to say what.
Any help greatly appreciated.
Panel well expanded:
Right Clicking on the clip will produce three options:
The only visible instance of Sequence From Clip is grayed out: -
Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark KamoskiHi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
How do I add the new tab icon to the Yosemite toolbar?
How do I add the New Tab icon to my Safari toolbar?--it disappeared after I upgraded to Yosemite.
To show your favourites bar where they were previously choose View>Show Favourites Bar. To add a page to your favourites. Click the share button right hand top, square with arrow pointing up. Choose Add bookmarks then adjust to add to favourites.
If you just mean a new tab hit the + button.
PJRS -
How to insert the new toolbar icons to a ALV report in custom container
Hi,
I found the exporting parameter for excluding the toolbar icons in the method "set_table_for_first_display" but I didn't find any parameter for including the new toolbar icons. I do not want to include the toolbar icons through the PF-Status, but want to include them with the method. Please tell me is there any option of including toolbar icons with using the above method.
Thanks,
Srinivas.Hi Srinivas,
Refer to the link
Adding buttons to standard alv toolbar in OOALV
Thanks -
HOW TO ADD A NEW ITEM ON CREDIT MEMO REQUEST DETAILS PAGE?
Dear friends,
Please help me to do this by personalization or extension. This is very important for sustaining in my job. Please post your thoughts as soon as possible.
Thanks so much for your help and support.
Here is the scenario:
In credit memo request page, I need to add a new item.
In the 'About this page', I checked for the view objects CMRequestVO and CMRequestLinesVO but the item is not available in the view objects.
There is an item called Requestor Comments shown on this page. The item to be added is the Approver Notes. These 2 columns are populated through the workflow.
How to find about the Requestor Comments item? If we know this then the Approver Notes item can be easily added to this page, I think.
Also I enabled the FND_PERSONALIZATION_REGION_LINK profile option so that
I can create a new item using personalization. But I could not see the create item icon in the create item field.
Can adding the Approver Notes be achieved by personalization?
EAGERLY WAITING FOR YOUR HELP.
CK.Hi VK,
You need to look at both VO's and see where to add the credit memo field.
To extend the VO object...you have to use Jdeveloper.
Check the below this site for the details steps:
http://apps2fusion.com/apps/oa-framework/14-fwk/119-oa-framework-faq-extending-view-objects
After extending the, you need to copy your objects under webserver and the bounce the apache.
Then you need to do personalization..
Here are the steps for personalization:
Click Personalize page and click "Expand All" under Personalization Structure..
Go to the corresponding Advance Table and Click on Create Item. This will create a Column Field
1) Enter Unique ID-- ex; CreditMemoEx
2) Rendered -- True
3) Click Apply
In the advance table search the newly created "CreditMemoEx"
Click on the Create Item field again.
1) Select Item Style " Message Styled Text"
2) Data Type -- Varchar2
3) Enter the Prompt = "Credit Memo"
4) Scope -- Enter the full path of VO object...ex: /xx.../oracle/apps/...
5) View Attribute -- Enter Exact name the attribute defined in the VO object.
6) Enter other attributes required for Business.
7) When Finished Click Apply. -
How to update an existing item in a sharepoint list using the WSS adapter for Biztalk
Is there a way that a record in SP list be updated using WSS adapter in biztalk ?
BizTalk 2013 and SP 2013 ..
Regards
Ritu Raj
When you see answers and helpful posts,
please click Vote As Helpful, Propose As Answer, and/or Mark As AnswerA ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
Regards. -
What's with the new Firefox 8.0? I made the mistake of updating mine and about 30% of the icons in bookmarks disappeared. It looks like you are requiring a favicon. Anyway, BAD IDEA!!!!!
Briansyddal - you might be able to manage your phone without a PC, but many of us can't, especially those of us with large iTunes libraries. How do you propose I manage my 250GB of music using only a phone? Maybe I could go out and buy 10 iPhones and spread my library out among them!
Catz537 - I have the same problem as you and I've spent hours on the web trying to find a solution to it. It was a problem with iOS 7 and 8.1.1 doesn't fix it. The the only advice from Apple is completely useless because it requires you, effectively, to delete and recreate your iTunes library and lose all your metadata, album art, notes etc and there's also no guarantee it will work. I wish I could be more help (even more - I wish Apple could be more help) - I updated to 8.1.1 at 1400 today. At 2200 I'm still "waiting for changes to be applied" for a measly 16GB of music transfer. -
Add the new item through the Bapi 'bapi_outb_delivery_change'
I want to add the new item to the existing outbound delivery.How to add the new item in the bapi 'bapi_outb_delivery_change'. Please provide me the code for the bapi 'BAPI_OUTB_DELIVERY_CHANGE' to add the new item.
Hi Kyndal,
I have a requirment to add new items in a delivery which will refer to the higher items in the same delivery itself.
I am trying to use the BAPI BAPI_OUTB_DELIVERY_CHANGE for the purpose.
Could u pls give some clue on how to tried to do it?
I am constantly getting a error VL216.
Also I tried passing the reference document and item : same delivery number and the higher level item in the delivery
VBTYP_N = J -
After waiting 27 minutes while the new iTunes supposedly downloaded onto my computer, the Finder window did not appear, and the iTunes.mpkg icon didn't appear on my desktop (where downloads usually go). I also looked for the new iTunes by clicking on my Hard Drive icon but didn't see it there either. I only see the icon for the old iTunes. What do I do?
The exclamation mark means that the app has lost the link to the actual file.
First step: try and make sure the iPhoto Library is working correctly:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
We have the SharePoint Server 2010 with SP1 environment on which the custom SP2010 designer pages were working as expected before the
August 13, 2013 CU has installed. But, getting the below exception while trying to add the new item after the CU has installed.
Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteInsert(IDictionary values) at
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65 w3wp.exe (0x1240) 0x1300 SharePoint Foundation
Runtime tkau Unexpected Microsoft.SharePoint.WebPartPages.DataFormWebPartException: The data source control
failed to execute the insert command. 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc at Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) at System.Web.UI.DataSourceView.Insert(IDictionary
values, DataSourceViewOperationCallback callback) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() at Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean
inclu... 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65* w3wp.exe (0x1240) 0x1300 SharePoint Foundation
Runtime tkau Unexpected ...deStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
I have tried changing the "DataSourceMode" as below, now the insert command is working, but update command is not working.
<SharePoint:SPDataSource runat="server" DataSourceMode="ListItem" />
Also, the lookup dropdown fields are displaying the value as "<a href="Daughterhttp://cpsp10/sites/Employees/_layouts/listform.aspx?PageType=4&ListId={8F62F444-FB6A-4F03-9522-C4696B45DCD1}&ID=10&RootFolder=*">Daughter</a>"
instead of only "Daughter".
Please provide the solution to get rid of this issue.
Thanks
RamasubbuTry below:
http://social.technet.microsoft.com/Forums/en-US/ae910269-3a0c-4506-844b-e8bc89d95b71/data-source-control-failed-to-execute-the-insert-command
http://blog.jussipalo.com/2012/01/sharepoint-2010-data-source-control.html
While there can be many causes for this generic error message, in my case the first parameter or ddwrt:DataBind function inside the SharePoint:FormFields element was
'i' and I was working with an Edit Form. Changing it to
'u' as it was with every other FormField fixed the issue.
<SharePoint:FormField runat="server" id="ff1{$Pos}" ControlMode="Edit" FieldName="Esittaja" __designer:bind="{ddwrt:DataBind('u',concat('ff1',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Esittaja')}"
/>
Explanation:
DataBind operation type parameters (the first parameter) are listed below:
'i' stands for INSERT,
'u' stands for UPDATE,
'd' stands for DELETE.
http://webcache.googleusercontent.com/search?q=cache:d9HHY4I7omgJ:thearkfloats.blogspot.com/2014/03/sharepoint-2010-data-source-control.html+&cd=4&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered -
I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor. The new Apple monitor is fine. On the cinema monitor everything is blown up pretty large. Any ideas on how to solve this?
The 30" display needs a DUAL-LINK adapter.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter> -
I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date? i.e. more "user-friendly" presentation?
Thx!
[email protected]In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date? i.e. more "user-friendly" presentation?
Thx!
[email protected]
Maybe you are looking for
-
How or where do I find the app in the iphone, the provider says it is stored somewhere?
-
Seems to be a catch22 situation. After installing iLife 11 from Install DVD I tried to open iPhoto. Received message that I needed to update to the latest version. Selected Software Update from Apple Menu and received reply that no new software is av
-
Hi, I'm getting stext & role_text from my internal table(which is populated from an excel sheet) and I have to compare them if they are similar or not.....how to do it.... Regards, sunny
-
BUG: Gallery 'Edit Together' causes application crash.
When I try to edit an item in the gallery widget, a crash dialog appears: I am running the ABSOLUTE latest Muse CC update. Please fix! I cannot continue my work until this is fixed! I am running Win8.1 64
-
Hello there, I have a container div set up which affects the layout of my page. Inside of it, I have a series of divs which contain an image, and a caption. I'd like Spry to cycle through them with (hiding the others in the series) with a controlled