How to undervolt MSI R9 280x for Linux? VBE has no effect on cards

Hi!
Does someone know, how to lower the core voltage for a MSI R9 280x under Linux? I have 2 cards. The old one is a s/n 602- V277 -28SB (great!) and the second one is a s/n 602- V277 -38SB (bad!).
I tried with VBE on my Windows-machine and set the voltage in the "State 1 - Performance" tab to 1062 for #6 and #0. After flashing the modded bios Vgpu is still at 1200 mV when measured directly on the card with a multi meter. Power consumption at the wall is 270 Watts. However, GPUz shows 1062 mV. Afterwards I set the voltage to -100 in Afterburner. The card now reads 1097 mV and the power consumption dropped to 235 Watt.
I have no idea why the card ignores the VBE settings. Any advice would be appreciated.

Quote from: love on 31-January-14, 06:29:44
Hi!
Does someone know, how to lower the core voltage for a MSI R9 280x under Linux? I have 2 cards. The old one is a s/n 602- V277 -28SB (great!) and the second one is a s/n 602- V277 -38SB (bad!).
I tried with VBE on my Windows-machine and set the voltage in the "State 1 - Performance" tab to 1062 for #6 and #0. After flashing the modded bios Vgpu is still at 1200 mV when measured directly on the card with a multi meter. Power consumption at the wall is 270 Watts. However, GPUz shows 1062 mV. Afterwards I set the voltage to -100 in Afterburner. The card now reads 1097 mV and the power consumption dropped to 235 Watt.
I have no idea why the card ignores the VBE settings. Any advice would be appreciated.
You are lucky, on my 28SB I can't boot after any change from 1200mV, even with 1193mV

Similar Messages

How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439

An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)
3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
5 - Then to open the app execute it: ./LenovoEMCStorageManager
Video Tutorial
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
Attachments:
lenovoemcstoragemanager.jpg ‏27 KB

Hello everyone ,
I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install the LenovoEMC storage Manager but it failed :
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
    1- Deutsch
   ->2- English
    3- Español
    4- Français
    5- Italiano
    6- Nederlands
    7- Português (Brasil)
    8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Is it still aproblem with the 64 bits architecture ?
Have you find any solutions ? Thank you very much

How to defined data carrier valued for Linux?

Hi,
I am Defining Data Carrier. But I don't understand "Data carrier type" value. Is this PC value data carrier type for window? So If I want to define value data carrier for Linux. How to defined data carrier valued for Linux?
Please advise,
Duypm

Hi Nikita,
Refer the below mentioned links for your requirement.
http://forums.sdn.sap.com/thread.jspa?threadID=412923
http://forums.sdn.sap.com/thread.jspa?threadID=1639500
Both have good guidelines on coding as well as configuration part.
Regards,
Deepak Kori

MSI GX633 DRIver For Linux

Please help me :
where can i
download
MSI GX633 DRIVER For
Linux
Please help help.
thank all manager

There are no drivers to download for Linux because a) MSI does not support Linux on their products, and b) your Linux distribution will normally already include all the drivers you need.
Which Linux distribution have you installed, and is there a particular driver you need?

How I can make an account for the app store Spain without credit card?

How I can make an account for the app store Spain without credit card?

Follow these instructions and open an iTunes account. Then use that same account to get free apps from the Mac App Store.
Create an iTunes App Store account without a credit card
http://support.apple.com/kb/ht2534

How install Oracle Developer Suite 10g for Linux (Including Forms & Reports

hi
i want to install Forms & Reports Developer Suite in Linux OS So i have downloaded From OTN Site
"Oracle Developer Suite 10g for Linux (Including Forms & Reports)"
These are the File's i have Downloaded:
as_linux_x86_ids_101202_disk1.cpio
as_linux_x86_ids_101202_disk2.cpio
so in the Oracle Documentation Site they have given Guide as Follows:
$cpio -idmv < as_linux_x86_ids_101202_disk1.cpio
$cpio -idmv < as_linux_x86_ids_101202_disk2.cpio
after that what should i do ...
How to Install Oracle Developer Suite 10g for Linux (Including Forms & Reports)
Kindly Reply ASAP

Pl follow the steps in the Install Guide - http://download.oracle.com/docs/cd/B19375_02/doc/frs/install/B19314_02/toc.htm
Srini

How to enable file size 2GB for linux RHEL4.0

Hi
I am on oracle 9.2.0.6 on linux RHEL 4.0. How do i enable large file size for filesystems.
When i query ulimit -a ulimit -f it is returning me unlimited.
But my database listener crashed as listener log file reached 2gb in size.
I couldnt find how to enable the largefile size for the filesystem.
Thanks
SV

Are you sure that the filesystem is limiting your listener log file size?
Please try to concatenate some lines into the logfile and see if the filesystem prevents it. I expect you to find out that the limit is only with the listener.
In any case, run a weekly/monthly job that creates an empty log file.
If the problem is with ext3 then you should check with someone more experienced because it does not sound to me like the proper (or default) behavior of ext3.

How to format a hard drive for Linux?

I have a hdd (500gb) that used to be my internal drive for my MBP 2012. It currently has Mac OS 10.10 and Ubuntu 14.04. I want to erase the drive though so I can make it strictly for Linux. The question is which format do I choose in disk utility. These are my options:
Mac OS Extended (Journaled)
Mac OS Extended (Journaled, Encrypted)
Mac OS Extended (Case-sensitive, Journaled)
Mac OS Extended (Case-sensitive, Journaled, Encrypted)
MS-DOS (FAT)
ExFAT
Thanks in advance

Format it from the Linux installer. You cannot format it using Disk Utility because you cannot format a startup volume.

How to contact MSI Authorized personnel for/from Bangalore, India.

Hello,
I bought a MSI motherboard P7N Platinum (under 3 years warranty), based computer from the Microport shop, NR Road. I had a problem with this computer and took it back to the same shop. The sales person most probably misguided me that the motherboard is at fault and made me RMA the motherboard.
The MSI RMA center D-LInk people made me wait 1 month and then have given me a P7N Platinum, but a much older motherboard and now the 3D application are working really really slow and the monitor keeps freezing for fraction of seconds, before changing to the next frame.
The previos motherboard used to display all the 3D applications fine.
Could someone give me the name/phone number for me to contact MSI Authorized personnel for/from Bangalore, India as I am not happy with the service provided by D-Link and feel cheated having bought a MSI product.
Thanks.

Quote
As far as I remember, the original motherboard in the bios setting had PCI-E frequency set to 200, I do not remember if the PCI-E frequency on that board started from 200 or ended at 200?
Sorry, but you must be mistaken. The defaul PCI Express Frequency is 100 MHz. Setting it to 200 would most certainly kill your board or the video card.
Quote
I do not find an appreciable performance boost when I take this setting from 100 to 170
Good lord, what are you doing there? Do not set the PCI Express Frequency to 170 MHz unless you want to blow something up.
Quote
If I set the PCI-E frequency at 200, the system hangs, there is no video on the monitor
That is normal. Please clear CMOS with the main A/C power cable removed from your PSU and load "Optimized Defaults" in BIOS Setup. Under no circumstances should you raise the PCI-E Frequency to 200 MHz. That's is what you do if you want to actually kill something.
I hope you are lucky and have not blown something to pieces yet.
Quote
Could someone enlighten me on the starting and ending frequencies of PCI-E on the latest motherboards MSI P7N Platinum 750i chipset.
The default PCI-E Frequency is 100 MHz on EVERY Mainboard. ... and that is also where it should stay.
Now, please provide full system specifications. Read the >>Posting Guide<<.
Quote
As you can see the replacement is much older.
As I already pointed out in my last post: This does not really atter. Check the PCB Version (it is printed onto the PCB, right next to the model Number (MS-7380). If that it is the same PCB Version, you received exactly the same board model.
Quote
I bought a MSI motherboard P7N Platinum (under 3 years warranty), based computer from the Microport shop, NR Road. I had a problem with this computer
What problem did you originally have?
Did you install the new board you got yourself or did the shop do that for you?

How to solve this: left-hand operand of comma has no effect?

hello, i am getting an error updating this package after libpng update... any clues?
./CImg.h:30417: warning: left-hand operand of comma has no effect
./CImg.h:30417: warning: right-hand operand of comma has no effect
./CImg.h:30417: warning: right-hand operand of comma has no effect
make[1]: ** [gmic_gimp.o] Erro 1
make[1]: Saindo do diretório `/home/gunga/arch/aur/gmic/src/gmic-1.3.3.4/src'
make: ** [gimp] Erro 2
==> ERRO: Compilação Falhou.
thanks

Those warnings should not be causing the compilation to error out. Look further back in the log for things marked 'error:'.

How to create msi with transform for zfdagent

As technicians in our organisation we are given the zfdagent.msi to
install, each time we have to laboriously enter all the required
organisation specific installation parameters........in short how can we
create a transform/answer file package to make life easier :-)

thanks for the reply, I had looked at that but as us mere technicians have
no access to server-side info it was kinda confusing etc, I have however
downloaded an evaluation copy of a software package that did this no
problem :-), I knew that with MS Office etc creating transform files etc
was relatively trivial and that surely this should be not a huge hassle
with the agent. Many thanks for your reply , Ian

How to set screen refresh rate for linux console (runlevel 3)?

Hi,
I have a CRT monitor, so the refresh rate is always needed to configure. I use 720x400 resolution in console, but the refresh rate is 70hz. Are there any ways to get it higher in console (with KMS or without)?
Last edited by AleXoundOS (2009-11-04 12:27:09)

thank you for replies
But setting the resolution, e.g. vga=773, would not change the refresh rate, or would it?
It would, but usually not to the maximum provided by the monitor. May be it is real to find the place, where it looks for available resolutions linked with refresh rates...
According to the Gentoo page I can use uvesafb for setting refresh rate as well as other settings. And then I found uvesafb page in ArchWiki. But the way to set proper refresh rate is not so easy as I expected, because I need to install uvesafb and it needs additional daemon. And also I think KMS can't work here. However it's better than nothing, if I don't find any other way, I will try this one.

How about using a 60fps video for a smooth slow motion effect in a 30fps project ?

Hey all,
I happen to have a video camera that is able to shoot either in 720p/60fps or 720p/30fps.
As you guessed it, 60 fps mode is very useful for action sports when you want to do some slow motion effect running very smoothly.
I have few questions I would love to be answered, and I was not able to find answers till now.
Here they are :
1/ If I want my final video file to be, let's say, 25 fps, is it mandatory that my project is 25 fps too ?
What will happen if I do a 30fps project and that I export to a 25fps file ? Does Premiere simply remove some extra frames ? Or will it lead to a longer video ? What consequence on the final result if frames are removed ? I mean, will I be able to see any difference or will the difference remain theorical ?
2/ Let's say I have both 30fps and 60fps videos. I set my project to 30fps. If I import my 60fps video to the timeline, it will be adjusted to 30fps and some frames disappear to keep the duration the same. Okay, this is clear to me.
But now, what if I import my 60fps to the timeline, but set the speed to 50% ? Will Premiere apply the 50% to the original file (therefore I should have all the frames displayed on the timeline : 60/2=30 fps), or to the 30fps-adjusted file of the timeline, leading to some jerky footage?
3/ If I want to use my 60fps for slow motion purpose in my 30fps project, would it be a good idea to right-click on this file in the project windows, going to the "modify" menu to set the image frequency to 30fps ?
Because while doing so, if I drag the file to the timeline, I noticed it would last 2 times longer (resulting in a slow motion video) Does that mean that ALL the frames of the original video are displayed ? Can someone tell me what exactly does Premiere ?
I would be very grateful if someone could tell me what are the correct settings to chose in order to realise the best slow motion videos as possible.
Thanks in advance !

With due respect... this does not answer my question and does not help me that much , but anyway, thank you for the very constructive answer ^^.
I'm not sure I would even have considered doing this by myself...
I hope I do not get this kind of answer because you feel like my question was silly or unpolite... To my mind this was a pretty serious question.
Shooternz, next time you need to go 150 km far away from where you are, go by feet rather than with a car, I'm sure you will have plenty of satisfaction too. Just cross the fingers for you not to be in a hurry while it's raining outside.
Well, I may be naive but i thought some experts already had the answer to this (I guess I'm not the only one who intend to do some slo mo), and would have been kind enough to share this knowledge with me. That's what sometimes happens in communities.
Please note I do not intend others to do the job for me, I'm just asking if someone already knows the answer.
I asked this question because I couldn't find any documentation about this, and I guess asking on internet was the next step, as testing would be like the last resort, being very time consuming.
It was easy to check the effect of dragging a file to the timeline to see if it played normally or not, but it's definitely not to count and compare each frame of some sample file to find if some are lacking, or have been doubled or what....
I assume I would be very happy with just a simple theorical answer either...
So once again, if someone already has been into such questions, I would really pleased him or her to share or report what they experienced. Thanks in advance.

JDeveloper 10.1.3.4: text-align for table column has no effect

Hi,
I am using JDeveloper 10.1.3.4. In a tabe I have a column that displays numbers, which are left-aligned by default:
Applied
$50.00
$2,160.00
$50.00
$2,260.00I want to have them aligned to the right to look neater:
Applied
         $50.00
      $2,160.00
         $50.00
      $2,260.00Or better still, have the cell with the longest string aligned to the center, and all the other cells align to it by the decimal point:
    Applied
      $50.00
   $2,160.00
      $50.00
   $2,260.00I looked in the property inspector and the only thing that looks closest to the purpose is text-align. I set this attribute to right (text-align:right) for the column, and for the outputText, but neither has effect. Everything is still flush to the left. How to get it right?
Thanks!
Newman

Hi, Branislav,
Nice meeting you again.
Last time the question was about formatting the total amount returned from the method, from String to Number, Re: JDeveloper does not handle expert SQL, cannot add query clause in view link, which can also format the number as currency.
This time, your answer again solved my problem. I was looking in the inline styling section, and did not notice this property in the General section. Thank you so much for your help!
Newman

[SOLVED]How to install this font : it doens't seem available for Linux

Hi everyone,
I'm currently running Gnome, and I'm trying to have the same theme than here : http://gnome-look.org/content/show.php/ … ent=108433. I've installed and used the Hydra theme : no problems with that.
The only thing I miss now is his font, I read the comments, and it's said the font used is "Zero Threes", they give a link (it's on page 2 if you want to check) : http://www.urbanfonts.com/fonts/Zero_Threes.htm
The problem is the font seems to be available on Mac and Windows, but I coulnd't find it for Linux. But the guy seem to have Linux and he's using it, so could somebody explain to me how can I get the font for linux ? Or if there is a way to install a Windows or a Mac font in Linux ?
Thanks you in advance !
Last edited by Dreepser (2009-08-29 11:53:00)

t4k1t wrote:The font is still only ttf so just download the win-version and copy the *.ttf file into your ~/.fonts directory.
Or, to make them available to all the users copy them to /usr/share/fonts/truetype directory.

How to undervolt MSI R9 280x for Linux? VBE has no effect on cards

Similar Messages

Maybe you are looking for