How to undisable my ipad?

i made a new password i forgot now its locked for an hour.

If you can't remember the password - You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
Instructions can be found here.
http://support.apple.com/kb/ht1212
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Similar Messages

  • HT1689 how to undisable my ipad

    how do i undisable my ipad

    You have to tell us more about what you mean by disabled.  Did somebody put it in a box, tie an anchor to it and toss it in the ocean?

  • HT5509 my ipad is disabled how to undisabled it

    how to undisable ipad

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • How do i undisable my ipad

    onnect
    the product im asking about is my ipad  mini. the apps ive got are mostly games and other apps too. my problem is that ive changed my passcode and then decided to change it back to the original passcode and I also pt voice over on and then I turned it off but somehow I turned my ipad on and it still had the voice over on. I tried both passodes and now my ipad is disabled and I need to connect to iTunes and I tried that but it wont ley=t me to connect to iTunes to undisable my ipad to play my games

    What happens when you connect it to your computer's iTunes ?
    There are instructions on this page for how to reset a disabled device, you can then restore/resync your content back to it : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled.

  • HT201412 how do i undisable my ipad if i forgot my password and the password key pad doesnt even show up?

    how do i undisable my ipad if i forgot my password and the password key pad doesnt even show up? i tried to restore it but it didnt work it still shows the same screen.

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to undisable iPad mini

    How can I disable iPad mini

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • How to connect my ipad with mac using bluetooth?

    how to connect my ipad with mac using bluetooth?

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

  • How to connect my iPad 2 to Sony Bavaria wirless? Any other way than apple tv?

    How to connect my iPad 2 to Sony Bavaria wirless? Any other way than apple tv?

    http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter
    this one? if i connect it to the tv, will it work  if audio system is connected to the tv?

  • How to connect my ipad using static ip

    How to connect my ipad using static ip?
    Using Netgear Router.

    Go to Setting > General > Network > WiFi > Then tap the blue icon next to your network, from here you can setup a static IP on your internal network.

  • How to connect my IPad to a security enabled wifi

    how to connect my IPad to a security enabled wifi

    iPad not connecting to a Secure Wi-Fi signal
    Turn OFF your wifi hub so the network is not broadcasting (or go out of range) so the
    iPad can no longer see the SSID
    Choose another network
    Type in the SSID (WiFi Network name)
    Select the security type
    Enter the password
    At this point, you will not be able to join the network (it is not turned on or you walked out of range, remember?)
    Turn ON your network hub and wait for the DSL or Internet to get connected, (30 secs to 1 minute in my case) or walk back in range
    Then click the Join button on the iPad
    Voila, as they say in Texas

  • How to connect my iPad, Brother printer, and AirPort Extreme?

    How to connect my iPad, Brother printer, and AirPort Extreme?

    I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

  • My ipad 3 is frozen on the plug into itunes page. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (there is no usb port on an ipad). If anyone could help it would be appreciated.

    My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.

    I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
    iPad User Guide for iOS 6
    iPad User Guide for iOS 7

  • How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

    How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

    Check for Updates.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg

  • My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • How to connect my iPad and iPhone to my new apple tv ?

    how to connect my iPad and iPhone to my new apple tv ?

    Also, make sure that all devices are on the same Wi-Fi network (e.g. not on a "guest" connection), and verify the ATV settings to see that AirPlay (and HomeSharing while you're at it) are turned on.

Maybe you are looking for

  • How to create a report to monitor all the reports created in the system?

    Hi all, i need to create a new query where i can get all the information about the web intelligence files in BO, i need in particular both the title and the description, in fact it's my intention to put in the description the technical name of the be

  • Tax code on the basis of Invoice Date in MIRO

    Hi Gurus! Tax rate change from 12.5% to 15 % is due on 1st October in NZ._________________ Client requirement is that in MIRO transaction w.r.t. PO instead of the tax code being picked up from PO, the Tax code should be picked up depending upon the I

  • K7T266 PRO2 (MS6380 Ver 3.0) FDD Controler Problems

    I just purchased a new boxed OEM MSI K7T266 PRO2 (MS6380 - Ver 3.0) motherboard from JUST DEALS on E-bay which seems to have very sparce (or none) documentation for download on this site.  This is a non-raid board which has the AGP Pro video card soc

  • Deleted files on back-up disk

    Hi, I've backed up my aperture files onto my new LaCie external HD 4 times now. Last time, I deleted several old images from Aperture before backing up. Now, when I click on the LaCie HD icon on my desktop, I see a new folder called "d2Quadra Deleted

  • How to export and Import BOM structure?

    Hello Experts, How can I export my BOM structure into xls, ms-project etc..? How can I import into SAP BOM? Pls point me any doc or link Regards Shital