How to undo the "never store password for this site"?

A friend did this on my computer on a site where I'm very frequently logging in.
How can I erase this preference just for this site, i.e. I want Safari to ask me again whether I want my password stored and then answer yes.

Safari > Preferences > AutoFill > User names and passwords: Edit...

Similar Messages

How do I save the password for a site for which I have chosen the "never remember password for this site" option?

The first time you enter a password for a site a box pops up under the address bar that has a picture of a key and then the question: "Remember this password?". In the drop box, I chose the option "Never Remember Password for This Site". I can't figure out how to change it so that the password IS remembered.

It sounds like the printer is still trying to retain the old network information.
Try a Hard Reset:
* Unplug printer while unit is turned on
* Unplug other end of power cord from the direct wall outlet
* Wait 30 seconds
* Plug unit back up for power
Reset Network information to Default:
* Press the Wrench/Setup menu button in the top right of the touch display of the printer
* Select the Wireless menu option
* Scroll down to Restore Network Defaults
After restoring the defaults, then try running the Wireless Setup Wizard. Let me know if the unit still does not retain the information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Reversing 'never save password' for a site

I accidentally clicked 'never save password' for this site on a site I use quite often. How can I reverse that? I've cleared data, history, cookies. Nothing works.
Thanks.

try...
go to general settings,
find safari,
click autofill,
turn OFF use contact info.

Want to reset the stored ID/Password for a site

I need to reset the stored ID/Password for a site. I entered the wrong ID and clicked Save on the pop-up for saving password for the site. Turns out I used the wrong ID to login and now I can't reset it to the correct spelling. It keeps overriding what I type in.

Highlight that entry in the drop down list and press Shift+Delete to remove it.
* http://kb.mozillazine.org/Deleting_autocomplete_entries
* http://kb.mozillazine.org/Password_Manager

I dont know the username and password for this dba application

Hi,
I dont know the username and password for this dba application. I installed the rmp file in /usr/lib. I will appreciate it if someone can sollve my prroblem.
Thank you.
'Dapo

Hi,
I dont know the username and password for this dba application. I installed the rmp file in /usr/lib. I will appreciate it if someone can sollve my prroblem.
Thank you.
'Dapo

The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

When i tried to login in inbrowserediting.adobe.com i see that:
The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
What does it mean? What is problem?

Hi,
I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
its saying the following
"The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
Yet i Can access my website fine "www.calmwood.com.au"
My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
so i am not understanding how it thinks its different. when its fully referenced
any help would be appreciated.
thanks

How to change the default admin password for IAS/UDDI

Using "OracleAS UDDI Registry" 10g Release 2 (10.1.2)
http://docs.oracle.com/cd/B15904_01/web.1012/b14027/regwsuddi.htm
How to change the default password
ias_admin/ias_admin123
http://xxx.xx.xxx.xx/uddi/publishing

Hello NJ,
I tried your solution and its a very good workaround for the workbooks stored in the Database, but when i open workbooks from file system then Discoverer defaults the export path to the Directory from where we have opened the workbook.
My clients are having most of their workbooks stored in File system & stored at different locations. So i wonder if there is just one common solution if possible?
Thanks

What is CPI-C and how to find the username and password for a 4.7c install

Dear Friends,
Please tell me what is a CPI-C username is ??
When do we use it?
And how/from where could I find the CPI-C user name and password of a particular system(4.7c)?
Please give me a detail knowledge.
waiting for replies ....
thx,
jeevan

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

I was asked if I wanted to store a password and said no. I would like to change my mind and store password for that site. How can I get Firefox to ask again?

Brand-new MacBook Pro running Lion OS (10.7.1)

Hi cor-el -
Thanks for directing me to the Mozilla help pages for passwords. I had already done that to no avail.
I had deleted the particular saved password from my Saved Passwords list (because it didn't include my username), and I now want to add it, but FF won't offer a second chance to save.
The password is not in my Saved Passwords list nor is it listed in the Exceptions.
(I'm running on a brand-new MacBookPro with OS Lion 10.7.1.)
I found the following and tried it, but it didn't work:
• delete site from bookmarks
• clear history when FF closes in prefs
• quit FF
• restart FF
• uncheck clear history when FF closes in prefs
I still can't seem to make FF offer me a second chance to save a password for a particular site.
Any help is appreciated.

I've got remember passwords activated but have changed one of my passwords and had to remove it from the list. It's not offering the option to remember the password for this site any more. help!

I've had this happen on a couple of sites where I've changed passwords. It doesn't offer to remember the new password whether I login when that side is still on the list of those with saved passwords, or whether I delete that site from the 'saved passwords' list first. It just...doesn't offer the option to save the password. How can I fix this???

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"
Some sites like PayPal and bank sites use autocomplete="off" to prevent Firefox from saving and filling in the name and the password.
If a site uses autocomplete="off" then look at this article for a bookmarklet to remove that autocomplete attribute and Firefox will offer to store the name and password.
* http://kb.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)
* http://kb.mozillazine.org/Password_Manager
* http://en.wikipedia.org/wiki/Bookmarklet

'Please enter the username and password for this s...

Hello,
ever since we have Bt broadband there have ben problems with the email account and this d****d pop-up! No matter what I do to the box , it keeps coming back. Then the account works fine for a while until it decides to appear again. I can have a whole week without it then a whole week with it appearing every few seconds. It has got worse today. Then Bt broadband help will pop up and say there are issues with the email account. I ask it to fix it and it goes through its procedure and comes back with no issues found! Finally this morning I had had enough and contacted the live chat. The man at the end of the line took over the computer, did not know what he was talking about and took me an hour to undo the damage he had done! He did say though that there were issues with Outlook 2010 and bt mail. I wonder if anyone else has suffered the same issues and solved them or if anyone knows of any conflicts between Outlook 2010 and bt mail? I'm at my wits end and bt is no help with its overseas, script driven help line! All my settings are fine as it happened with a second account that the 'chat' man set up and nothing happens with another account that I have with Virgin.
Thanks ... Louise.

eddielouise wrote:
Hello,
ever since we have Bt broadband there have ben problems with the email account and this d****d pop-up! No matter what I do to the box , it keeps coming back. Then the account works fine for a while until it decides to appear again. I can have a whole week without it then a whole week with it appearing every few seconds. It has got worse today. Then Bt broadband help will pop up and say there are issues with the email account. I ask it to fix it and it goes through its procedure and comes back with no issues found! Finally this morning I had had enough and contacted the live chat. The man at the end of the line took over the computer, did not know what he was talking about and took me an hour to undo the damage he had done! He did say though that there were issues with Outlook 2010 and bt mail. I wonder if anyone else has suffered the same issues and solved them or if anyone knows of any conflicts between Outlook 2010 and bt mail? I'm at my wits end and bt is no help with its overseas, script driven help line! All my settings are fine as it happened with a second account that the 'chat' man set up and nothing happens with another account that I have with Virgin.
Thanks ... Louise.
Hi Louise, welcome to the forums.
There is no issue with Outlook 2010 - in fact there are no issues with pratically any mail client. The issue is down to the yahoo mail servers solely, particularly the backend mail server farm mail.btinternet.com.
Over the past couple of months they seemed to time out, reject access and all sorts of things for different users and different user accounts at different times.
You may like to try altering the Outlook account settings yourself to enter the details I've written via my shortcuts option 0d/h. See how you get on with that.
Also you may like to stop Outlook checking every few minutes, assuming you've got that option set. Hence do a manual send/receive at your own leisure.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

How to solve the error "Ref Count for this object is greater then 0"

Hi,
I'm trying to add UDF at runtime to an already created UDT which is of No Object Type.
my code is as follows:
dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
oUserFieldsMD = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
oUserFieldsMD.TableName = "@TI_ADDCODES"
oUserFieldsMD.Name = codetoinsert
oUserFieldsMD.Description = desctoinsert
'Add the field to the table
   lRetCode = oUserFieldsMD.Add
   If lRetCode <> 0 Then
   ocompany.GetLastError(lErrCode, sErrMsg)
   MsgBox(sErrMsg)
    Else
    MsgBox("Field: '" & oUserFieldsMD.Name & "' was added successfuly to " & oUserFieldsMD.TableName & " Table")
    End If
I got error msg as "Ref Count for this object is greater then 0" and error code is -1120
how to rectify it?
Thanks in advance!!!

Hi,
Have you searched the forum? You may check this first: error -1120 when adding UserTableMD.
Thanks,
Gordon

How to edit the html source code for my site

I have just started a blog, and am VERY new to it. I am trying to edit the html source code on my site (ie, to insert google adsense search bars). I go to my blog site, get to page source and see the html but I am not able to edit it. Not sure what I am doing wrong. Thanks!

You can use any editor you want mine is set up for notepad.exe
:see http://dmcritchie.mvps.org/firefox/firefox.htm#notepad
:to invoke use "Ctrl+U" or View > Page Source
:this is for sites that you maintain on your local drives or servers, and copy over to a website.

Any description on how to use the Text Editor used for this Forum?

I am very frustrated when trying to use the text Editing functions (without use of HTML, that I do not undertstand) that can be used to create Posts in this Forum .
Can somebody point me to a good description of the Text Editor used to enter/edit Posts in this Forum? Thanks a lot in advance.

Ian,
Thank You very much for your answer.
Based on your answer, I guess and fear, that there exist no "user guide" for this Text Editor.
I will wait a little bit more to see whether I get more information/answers. If not, i will probably write a "Feature Request" to request that Adobe provides us or point us to a reasonable User-Guide for this Text Editor.

How to write the pl/sql code for this scenario

Hi,
Here is the data in a Table with below colums
id firstname lastname code
1 scott higgins 001
2 Mike Ferrari 001
3 Tom scottsdale 002
4 Nick pasquale 003
1 scott higgins 004
I want to trap the following exceptions into an error table using pl/sql
1. same person having multiple code
example
id first last Code
1 scott higgins 001
1 scott higgins 004
2. Multiple persons having same code
id first last Code
1 scott higgins 001
2 Mike Ferrari 001
Could you please help me how to capture the exceptions above using pl/sql
and what will be the structure of error table. it should capture eff date & end date

or using analytic functions like this:
select id, fname, lname, code from (
with t as(
    select 1 id, 'scott' fname, 'higgins' lname, 001 code from dual
    union all
    select 2 id,'Mike ' fname, 'Ferrari' lname, 001 code from dual
    union all
    select 3 id,'Tom' fname, 'scottsdale' lname, 002 code from dual
    union all
    select 4 id,'Nick' fname, 'pasquale' lname, 003 code from dual
    union all
    select 5 id,'scott' fname, 'higgins' lname, 004 code from dual
    select t.*, count(*) over (partition by fname) row_count from t)
where row_count > 1;
select id, fname, lname, code from (
with t as(
    select 1 id, 'scott' fname, 'higgins' lname, 001 code from dual
    union all
    select 2 id,'Mike ' fname, 'Ferrari' lname, 001 code from dual
    union all
    select 3 id,'Tom' fname, 'scottsdale' lname, 002 code from dual
    union all
    select 4 id,'Nick' fname, 'pasquale' lname, 003 code from dual
    union all
    select 5 id,'scott' fname, 'higgins' lname, 004 code from dual
    select t.*, count(*) over (partition by code) row_count from t)
where row_count > 1;

How to undo the "never store password for this site"?

Similar Messages

Maybe you are looking for