How to undo the "Paste into" in Indesign?
Does anyone know how to undo the "Paste into" in Indesign? I have used the "paste into" to mask a list of items but now i want to redo it so that I can see the whole list of items again. Is it possible?
thanks!
Same way you undo anything else, Edit > Undo, or are you asking if you can come back days later and remove the content, then put it elsewhere? Sounds like maybe the latter, and my guess is you pasted a text frame into another frame, so you need to select the outer frame, then Object > Select > Content, or just use the Direct Select tool to select the content, then cut and finally paste it someplace else.
Similar Messages
-
How to populate the data into the newly added infoobjects?
Hi,
how to populate the data into the newly added infoobjects?
Thanx in advance,
Ravi.hi ravi,
here is one example how to enhance.
Goto RSA6- select the 0Material.- Click on Enhance extract structure-> it will take u to the next screen there u need to create the field material group1. and append it to 0Material.
Goback to RSA6-- RC on 0material-- it will take you to customer version edit screen- here unchk the Hide and Field only known in exit options n save it.
Next Go back to RSA6-- 0material- click on Function enhancement it will take you to CMOD Screen( here we need to enter the project name and click create if not created on click display)
In the next screen we find the function exits Like EXIT_SAPLRSAP_001 FOR T DATA AND EXIT_SAPLRSAP_002 FRO Master Data,_003 for Text n _004 for Hierarchies.
select the appropriate function exit and double clikc on it. It will take you to Function builder screen.
D Click on defn of Include ZXRSAU01. it will take you to abap editor screen.
here u need to include the code for the enhanced fields n also write the code to populate the dat for that particular field.
save it and avtivate the code.
Hope this Is helpz,
partha -
How to import the IDOC into Seeburger BIC mapping designer
Hi All,
Can u please tell me how to import the IDOC into Seeburger BIC mapping desginer.
I have scenario My scenario is SAP GTS 7.0.....>Seeburger BIS.....>Atlas customs system for Germany
Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send
to Atlas systeam.
Regards,
Ramesh.Hi Ramesh
BIC is a tool from Seeburger to transmit the XML data to EDI and EDI to XML.
Seeburger mapping programs for transferring the XML data to EDI data and EDI data to XML data, but not for the structure changing, in the IR your mapping program is same.
Receiver side you need AS2 Adapter for converting data to EDI target structure. we have many EDI versions are available, for converting the EDI to XML or vice versa AS2 gives some default mapping programs, xml to EDI or EDI to XML convertion done through this mapping programs.
Seeburger AS adapter provider provides some mapping programs(for example EDI4010 version or other), if you are using the same EDI version(4010) then you can use that mapping programs, if the version is different then we can manually generate the Seeburger X2E and E2X mappings for the corresponding version and signal(850 or 810 or ..), for this seeburger provides the mapping designer tool (BIC), there we can develope the X2E and E2X mapping programs and configure this in the Seeburger work bench.
Regards
Ramesh -
How to reactivate the welcome screen of indesign?
how to reactivate the welcome screen of indesign?
Thanks, but it seems that there is no welcome screen in CC.
Jeronimo Nilson
Em 10/06/2014, à(s) 20:16, Fede Gianni <[email protected]> escreveu:
how to reactivate the welcome screen of indesign?
created by Fede Gianni in InDesign - View the full discussion
this is CS6, but maybe is still there
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6448823-645751/Screenshot2014-06-10at18.15.08+.png
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6448823#6448823
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
How to divide the iview into frames?
Hi Experts,
Please tell me how to divide the iview into frames.Kindly provide the steps.Its urgent.
Regards,
NutanHi Nutan,
Now its clear!!
If I understand right. You want an overview page full of links to go to your different pages?
Or maybe you want a link form each page to go to another page?
In Portal Navigation through hyperlinks is possible.
You can either do that using EPCM.doNavigate("ROLES://...") {check for EPCM API of help.spa.com}
Or you could do that by simple
<a href="http://www.sdn.sap.com/irj/portal/myql">CLICK</a>
{check for Quicklinks on help.sap.com}
Either way you'll have to make a small JSP for that.
Hope this helped
If so kindly reward with points
Prem -
I have just installed Illustrator CS6 yesterday, but I found it was in French. Could help me figure out how to change the language into English?
I got my series number from my Institut (which is in Paris, FR). I do not use Creative Cloud.
When I was installing the software, I cannot select a language.
Could you help me with my problem? Do I have to get a different series number?lunc,
You will have to get a new application in English, to replace the French one.
You, or your Institute will have to get help from Adobe, I am afraid.
You may try a chat here,
Get help with orders, refunds, and exchanges (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-b.html
or (have your Institute) talk to Adobe in France
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
If you fail to get any help, please report back here, and I will ask a special forum staff friend to try to find the right one at Adobe to have things sorted out. -
How to covert the Digits into Barcode
hi friends,
how to covert the numbers into Barcode notation in java
pls help me out.Hi,
See http://jbarcode.ronisons.com/doku.php
Hope that help,
Jack -
Hi, Might I know that how to setup the printer setting at InDesign CS6 for the Lable print?
Label printing isn't something you set up in the print dialog in ID. If your print driver has an n-up feature that might work, but in general you need to create pages of labels to fit your sheets in ID, then print. If you are talking about doing a merge of an address list, read about Data Merge in thehelp files.
-
How to Splilit The String Into Single Column using Comma As Delimiter ?
How to Splilit The String Into Single Column using Comma As Delimiter ?
using Functionrefer my thread ,code is also available see if that helps you
error while executing the sp ORA-21779: duration not active -
How to get the past top 100 match data of game app?
how to get the past top 100 match data of game app?
What game app? Have you contacted the developer of the app?
-
How to maintain the data into database table
Hi,
experts,
how to maintain the data into database tableThere are several ways to maintain data in the database
1. Use table maintanance generator . You can create this using SE11 and data can be edited through SM30.
2. Loginto SE11 with the specified table and check the ATTRIBUTES tab. There you can set some parameters for maintaining the database. When you set Maintain database, you edit the data thorugh SE11 it self
3. Through Se16 as well.
4. A small abap program can do the above task as well.
Thanks,
Raj
Edited by: Rajanya Kolavennu on Feb 5, 2008 8:33 PM -
How to write the data into EEPROM using Labview?
How to write the data into EEPROM using Labview?
You would need some sort of EEPROM programmer. Typically might
communicate with it via serial. I don't know how you would do this in
LV. You would need to have the command protocol for the programming
device to start with.
Doug De Clue
gpibssx wrote in message news:<[email protected]>...
> How to write the data into EEPROM using Labview? -
How to pull the data into smartform after designing layout?
how to pull the data into smartform after designing layout?
call the smartform in your Driver program and pass your output internal tables in the smartforms paramaters
Check the below Sample code.
FORM label_print.
DATA : g_fm_name TYPE rs38l_fnam,
g_output TYPE ssfcompop,
g_control TYPE ssfctrlop,
g_form TYPE tdsfname VALUE 'ZPRINT_LABELS',
g_dest TYPE rspopname,
g_printer TYPE rspoptype..
REFRESH : i_out[],i_qals[].
SELECT matnr maktx
INTO TABLE i_out
FROM makt
FOR ALL ENTRIES IN i_mseg
WHERE matnr = i_mseg-matnr
AND spras = sy-langu.
SELECT prueflos objnr ersteldat erstelzeit matnr revlv charg mengeneinh
INTO TABLE i_qals
FROM qals
FOR ALL ENTRIES IN i_mseg
WHERE matnr = i_mseg-matnr
AND charg = i_mseg-charg.
*FM to accept the device type and returns the short name of the output device
CALL FUNCTION 'EFG_GET_PRINTER'
EXPORTING
x_no_dialog = ' '
x_obligatory = 'X'
IMPORTING
y_tddest = g_dest
EXCEPTIONS
cancelled = 1
failed = 2
OTHERS = 3.
*device type name for the output device
SELECT SINGLE patype "#EC CI_NOFIELD
FROM tsp03d
INTO g_printer
WHERE padest = g_dest.
*printer setting
g_control-no_dialog = 'X'.
g_output-tdarmod = '1'.
g_output-tdcopies = '001'.
g_output-tddest = g_dest.
g_output-tdprinter = g_printer.
g_output-tdnewid = 'X'.
g_output-tdimmed = 'X'.
CLEAR wa_mseg.
LOOP AT i_mseg INTO wa_mseg.
READ TABLE i_out INTO wa_out WITH KEY matnr = wa_mseg-matnr.
check for the status and filter the records
CLEAR : wa_qals.
LOOP AT i_qals INTO wa_qals WHERE matnr = wa_mseg-matnr
AND charg = wa_mseg-charg.
CALL FUNCTION 'STATUS_TEXT_EDIT'
EXPORTING
objnr = wa_qals-objnr
spras = sy-langu
IMPORTING
line = l_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
IF l_status CS 'LTCA' OR l_status CS 'SKIP'.
DELETE i_qals.
ENDIF.
ENDLOOP.
SORT i_qals BY ersteldat DESCENDING erstelzeit DESCENDING.
IF i_qals IS INITIAL.
l_msg = text-002.
ELSE.
READ TABLE i_qals INTO wa_qals INDEX 1.
SELECT prueflos vbewertung
INTO TABLE i_qave
FROM qave
WHERE prueflos = wa_qals-prueflos
AND kzart = 'L'.
IF sy-subrc <> 0.
l_msg1 = text-003.
ENDIF.
SORT i_qave.
CLEAR : wa_qave.
IF NOT i_qave IS INITIAL.
READ TABLE i_qave INTO wa_qave INDEX 1.
IF wa_qave-vbewertung = 'A'.
l_msg = text-002.
ELSEIF wa_qave-vbewertung = 'R'.
l_msg1 = text-003.
ELSE.
l_msg1 = text-003.
ENDIF.
ENDIF.
ENDIF.
CLEAR : wa_ser03.
READ TABLE i_ser03 INTO wa_ser03 WITH KEY mblnr = wa_mseg-mblnr.
*Calling Smartform
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = g_form
IMPORTING
fm_name = g_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
LOOP AT i_objk INTO wa_objk WHERE obknr = wa_ser03-obknr.
*Calling FM generated from the smartform
DATA : l_date(10) TYPE c,
l_date1(10) TYPE c,
l_date2(10) TYPE c,
l_date3(10) TYPE c,
l_hyphen(1) TYPE c VALUE '-'.
CLEAR : l_date,l_date1,l_date2,l_date3.
l_date1 = wa_mseg-vfdat+0(4).
l_date2 = wa_mseg-vfdat+4(2).
l_date3 = wa_mseg-vfdat+6(2).
CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
CALL FUNCTION g_fm_name
EXPORTING
control_parameters = g_control
output_options = g_output
user_settings = ' '
g_matnr = wa_mseg-matnr
g_mat_text = wa_out-maktx
g_batch = wa_mseg-charg
g_rev = wa_qals-revlv
g_edate = l_date
g_lot = wa_qals-prueflos
g_qty = wa_mseg-erfmg
g_uom = wa_mseg-erfme
g_serial = wa_objk-sernr
g_smsg = l_msg
g_fmsg = l_msg1
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
CLEAR g_output-tdnewid.
ENDLOOP.
IF sy-subrc <> 0.
CLEAR : l_date,l_date1,l_date2,l_date3.
l_date1 = wa_mseg-vfdat+0(4).
l_date2 = wa_mseg-vfdat+4(2).
l_date3 = wa_mseg-vfdat+6(2).
CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
CALL FUNCTION g_fm_name
EXPORTING
control_parameters = g_control
output_options = g_output
user_settings = ' '
g_matnr = wa_mseg-matnr
g_mat_text = wa_out-maktx
g_batch = wa_mseg-charg
g_rev = wa_qals-revlv
g_edate = l_date
g_lot = wa_qals-prueflos
g_qty = wa_mseg-erfmg
g_uom = wa_mseg-erfme
g_serial = wa_objk-sernr
g_smsg = l_msg
g_fmsg = l_msg1
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
CLEAR g_output-tdnewid.
ENDIF.
ENDLOOP.
IF sy-subrc = 0.
MESSAGE i000(zm).
ENDIF.
ENDFORM. " label_print -
How to write the resultset into a text file
how to write the resultset into a text file
You can use the java.io.* package to write to files.
API: http://java.sun.com/j2se/1.5.0/docs/api/java/io/package-summary.html
Tutorial: http://java.sun.com/docs/books/tutorial/essential/io/index.html -
Guys, i want to ask on how to resize the images into 1200 pixels wide?
Guys, i want to ask on how to resize the images into 1200 pixels wide, how to do it? and what are the step by steps on doing that? thank you!!!
See this link: http://forums.adobe.com/docs/DOC-3691
Maybe you are looking for
-
Security Question - How do I know if my Ex is getting in my wifi LAN?
Hello. I hope this is not inappropriate to ask here. I'm new and didn't see a previous thread about this. My ex set up our home wifi network and I want to make it so that I know that no one but me is able to get in to it (short of hacking it or sen
-
Retrieving WCM content from UCM and displaying on webcenter 11g
We will have a separate site designed using site studio for content contribution (WCM content). Presenting this content will be done on a separate site. The presentation site will be developed using Webcenter Framework 11g. Our concern is how to retr
-
Printed colors not correct from Preview
Hi All, I'm a pro photographer with a good understanding of color profiles and calibration. My G5 system is fully color calibrated from monitors (Apple Cinema displays) through to printer and I get great color reproduction on screen and when printing
-
Problem activating after trial expired
I used the trial version of Flex Builder 3 Plugin for Eclipse, but didn't buy it before the trial period expired because I couldn't afford it. A few weeks later, I noticed the Adobe program for unemployed engineers, applied for it, got accepted, dow
-
Installer won't open a pkg file
I have just purchased wirless USB kit for an old iMac G3 and am having difficulty installing the software. When I double click on the pkg file, Installer launches but no screen appears. I verified with the Information command that the file expects to