How to Uninstal Server Tool

Dear all,
I want to ask your help, how to uninstall server tool from server ? I'm trying to uninstall through Add/Remove Program in Control Panel but I can't find SAP B1 server tool.
Thanks a lot

Dear,
Go to add and remove program,then uninstall the server tools.
If you want to uninstall SAP B1,firstly uninstall the client,server then server tools.
also go to program files--remove sap folder.
Hope this will help you.
regards,
Neetu

Similar Messages

How are Windows Server Backup and Command Line Tools used in vCSHB installation?

How are Windows Server Backup and Command Line Tools used during the installation of vCSHB? Is it required in all types of deployments (PtoV, VtoV, PtoP)? Is it used to create the files that are put in the file share for the second node to use during vCSHB installation or is it only used during a vCSHB clone operation of a Physical to Physical deployment? Are these tools not used in some deployments?

You need Windows Server Backup installed on source and destination, and during the installation of vCSHB the installer will invoke the wbadmin (Windows Server Backup Utility) and will backup configuration and application data (application data is optimal but can decrease the sync time after installation of secondary node). On the secondary node you will need only run the vCSHB installer and everything will be restored.
Check this blog entry for some more info about some problems in P2P deployment: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

File Server Resource Manager will not load WMI Objects on Windows 8.0/8.1 Preview with Hyper-V and Server Tools Loaded

Hi Folks,
I have a problem getting "File Server Resource Manager" to start properly because WMI objects are not loading??? I don't understand this at all because I am able to access them with other Apps, etc. I have been over my Services list as well but
have not yet discovered which Service turns on/off "File Server Resource Manager". I have looked in Windows\System32\ and I can not find SrmSvc. I found other Srm's there though. I also found the FSRM Snapin which generates the Figure below but I
can not find it in the WMI Browser. I believe the Firewall is OKAY since I have been over that thoroughly. I do have the Server Tools Installed for Windows 8.0 or Windows 8.1 Clients as well as the Windows Updates applied, which is where I got "File Server
Resource Manager" in the first place. I have had WMI and Powershell 3.0 Package, installed since Windows 7 but I run a repair on them anyway.
I have read through "File Server Resource Manager could not load WMI objects on Windows Server 2012
Article ID: 2831687" but since I don't seem to have SrmSvc the solution doesn't help me. I haven't been able to find a similar one for the Windows Client.
If there is anything you could share on this problem I would be much obliged.
Thanks again,
Crysta
PhotM Phantom of the Mobile

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Server tools not working on Snow Leopard

I just upgraded my home Intel Mac Pro from 10.4 to 10.6, and downloaded the 10.6.4 Server tools from the website (WorkGroup manager, Server Admin, Server monitor, etc.). Our Xserve is 10.6.4 also, so there shouldn't be any incompatibility (like there was when I wanted to manage the 10.6 server from my 10.4 machine). But when I double-click on any of these apps, nothing happens - something flashes through the dock once and then nothing (like when you try to run a 10.6 app in 10.4). No error, but no running apps either. What am I missing - why don't these run here? Is there a better URL to download them?
thanks,
Mike

Hey, I fixed it! I remembered (by trying in Firefox, where it works, by the way) that the Youtube Bulk video uploader uses Google Gears. I noticed that Safari had Gears 0.5.30.0 while the latest version I just installed for Firefox was Gears 0.5.32.0. I googled and found an old bug report somewhere saying that in a Snow Leopard beta, Gears worked in Firefox but not Safari, so I knew I was on the right track.
I tried to upgrade Gears in Safari by going to http://gears.google.com, but it did not display anything about which version I had or how to upgrade (as it does in Firefox) although if I looked at the page source I could see the text 'Your Gears installation is too old and needs to be upgraded'. So in the end I just deinstalled Gears (follow the instructions under 'If you need to remove a plug-in' in Safari help) and now I have the button back to upload a video, instead of just 'Loading...' I haven't tried it yet but it looks promising.

Uninstall SAP HANA server tool

Hi Experts,
I want steps on how to uninstall SAP hana server tools.
I didn't find any way to do that so I deleted the folder but with that when I try to install server components I get error failed ,roll back.
Urgent help on how to uninstall SAP HANA server tools to unable me install new package.Linux.
Regards
Justice

Hi Justice,
Try:
rpm -q -a | grep B1 | xargs rpm -e
And then try reinstallation.
If it works, next time when you uninstall B1 on Linux, please use the uninstall.bin located in the installation path, typically opt/sap/SAPBusinessOne. You can find the instructions in the Administrator's Guide (HANA version), which is in the product package \Documentation\SystemSetup\ and also in the Packages.Linux folder.
Best

How to run server in my eclipse

HI friends ,
How to run server in my eclipse
i am using my eclipse and the version is 3.1.1 and i am facing difficulty while running server .so pls give me some steps regarding running a server .

jvarmad wrote:
HI friends ,
How to run server in my eclipse
i am using my eclipse and the version is 3.1.1 and i am facing difficulty while running server .so pls give me some steps regarding running a server .If you have WTP (Web Tools Platform) installed, go to File > New > Other ... > Server > Server and select the server you want to install.
kind regards,
Jos

DI Server in Server Tools stopped and now cannot start

Hi,
I have an issue on firstly stopping the DI server from Server Tools and then I want to start the service again. Basically, I wanted to restart the DI Server service. But when I stopped the service, it isn't stopping completely. I also checked by going to services.msc. There the status is shown as Stopping.
How can I stop this service safely and then start again?
Any ideas will be highly appreciated.
Thanks in advance.
Regards,
Sanil

Well, it happened to me but it wasn't the DI Server, in fact, it wasn't any sort of SAP service. The problem: "admin rights".
Maybe you should open the Server Tools running as administrator, start/stop DI Server.
Test in the command line:
NET STOP SBODI_Server
or
NET STOP /y SBODI_Server
Now, sometimes a windows service can hang on, it never reaches the stopped phase. The only way to stop the service is killing the process, in this case "B1DI_Server.exe". This won't end another process.
End process or end process tree would be the solutions (Try the first one).
In the command line you could do this:
sc queryex SBODI_Server -> Now, you get the PID. For instance: 409
taskkill /PID 409 /F -> It's forced to kill the process
This should avoid the need of a reboot, but take care.

Weblogic 8.1 and Eclipse using Weblogic Server Tools

I am working on a project that has been developed with Weblogic 8.1 without integration into an IDE (Eclipse, etc.) We are trying to convert the source tree to a form usable within Eclipse using Weblogic Server Tools. We want to make deployment on developer workstations quicker and easier and provide for server side debugging. There is not much documentation on how to do this that I have been able to find. I have just finished reading the details of the split directory strucuture in the Weblogic documentation and understand that Server Tools uses the split directory concept. My question is basically how we create the project in Eclipse (with Server Tools plug-ins) initially. Is anyone out there still using Weblogic 8.1 and Eclipse 3.3 (Europa) using Weblogic Server Tools that can help?

There isn't much in a way of documentation that's explicit to WebLogic Server Tools, but a lot of Workshop 10.2 documentation applies. Basically, you will want to create Dynamic Web Projects to house your code. On the first page of Dynamic Web Project wizard, you will get a chance to define and target a server (WLS 8.1 in your case). That will configure your project classpath for WLS 8.1 and get everything else squared away.
Note that there is only very basic support for 8.1. In particular, the split-directory concept is not supported, but deployment is taken care of for you behind the scenes, so the details shouldn't matter that much.

Dependency conflicts when installing WebLogic Server Tools in Eclipse Juno

Installing the WebLogic Server Tools in Eclipse (Juno) on Windows 7, 64 bit cannot be completed. Eclipse is up to date and several other plugins are installed.
When installing the server tools, either via the Marketplace or the Server view -> New Server -> Download additional server adapters it fails because of incompatible dependencies. The error message is:
Cannot complete the install because one or more required items could not be found.
Software being installed: Oracle WebLogic Server Tools 2.2.0.201211211917 (oracle.eclipse.tools.juno.weblogic.feature.group 2.2.0.201211211917)
Missing requirement: Oracle Eclipse Tools Environment Checker 5.2.0.201211211917 (oracle.eclipse.tools.envcheck 5.2.0.201211211917) requires 'bundle org.eclipse.ui [3.8.0,3.104.0)' but it could not be found
Cannot satisfy dependency:
From: Oracle Common Tools 2.2.0.201211211917 (oracle.eclipse.tools.juno.common.feature.group 2.2.0.201211211917)
To: oracle.eclipse.tools.envcheck [5.2.0.201211211917]
Cannot satisfy dependency:
From: Oracle WebLogic Server Tools 2.2.0.201211211917 (oracle.eclipse.tools.juno.weblogic.feature.group 2.2.0.201211211917)
To: oracle.eclipse.tools.juno.common.feature.group 0.0.0
Does anyone know how to solve this and get the WebLogic Server Tools installed?
rob schlüter
Edited by: Rob Schlüter on Mar 11, 2013 3:12 AM

See this thread:
Juno 4.2 SR2 and OEPE
Until the next OEPE release comes out, you need to make sure that you are running with Juno SR1 when installing OEPE. Installing into Juno SR2 will not work.
- Konstantin

Hi Any body Knows How to use CAT Tool for Up Loading?

Hi
If any body knows how to use CAT Tool for up loading transactions, explain the steps.
Our requirement is, we want to up load transactions like Oppor , Quotation,Order etc...we want to up load these transcations from Local system to CRM Server
how to do this? Let me know the steps.
Regards
Venkat

If you have 10,000 or less, CATT is a reasonable method, but I would suspect that you have far more than that if you're needing to load transactions.
LSMW is probably a better way to go if you have more than 10k, but I am not familiar with LSMW

Installed 10.6.8 Server Combo Update, but can't update Server Tools to 10.6.8?

Hello all,
I installed the 10.6.8 combo update for my xserve earlier today. I also need to update the server tools to 10.6.8 since I am trying to create a new NetInstall image from a .dmg that is running 10.6.8.
The server tools update has always shown up in the past in Software Update, but I didn't see it this time around so I went and found what looks like the download link for it: http://support.apple.com/kb/DL1403.
Anyway, I get it downloaded and go to install it, and it says my Server HD does not have Mac OS X installed, and it will not install the update.
I have the 10.6.8 Server Tools installed on my imagebuilder, but it isn't setup with the right workflow and it would be a hassle to get that going.
Has anyone else had any problems getting the 10.6.8 server tools installed on their xserve?

@m.mills: I'd be interested to see what your workflow looks like for your image using the 10.6.7 SIU on 10.6.8 Server? I have been struggling trying to get NetInstall or NetRestore to work using this tool. For NetRestore, it tries to install on the MBP, but fails after a minute or two with this error:
Unable to set '10.6' as boot disk: The bless tool was unable to set the current boot disk."
I am using the 10.6 retail DVD as source. I have a very basic workflow:
* source DVD 10.6
* Enable Automated Intall; install to volume name: 10.6, erase before installing
* Apply System Configuration Settings - (apply computer name and local hosts setting)
* Add 10.6.8 combo pkg
* Create image
I also have a machine running 10.7 Server and have successfully created a 10.7.2 image, but 10.6.8 has been giving me fits. It would be nice if I could create a 10.6.8 image on the 10.7 server. Is it possible to do this?
Any Help is appreciated.
thx

Unable to install SQL Server CE Server Tool on SQL Server 2000 SP 4

Hi
I am facing problem with installing SQL Server CE Server Tool,
I have installed SQL Server 2000 SP 4 which is working fine.
While i am running Setup of "SQL Server 2000 Windows CE Edition version 2.0" ,Developer tools installed successfully but incase of SQL Server CE Server Tool i am getting following Error
"SQL Server CE Tool is compatible only with SQL Server 2000 Service pack 1 and higher.
When you install SQL Server CE Server Tools on a computer running both IIS and SQL Server 2000 , ensure the installer for SQL Server CE Server Tools corresponds To the version of SQL Server 2000."
I am sure that i have running SQL Server 2000 SP 4 (MSDE also SP 4) , IIS (Version 5.1) is also working fine , and one more thing i am trying to install SQL Server CE Server Tool setup is "sqlce20sql2ksp4.exe" (Which i downloaded from microsoft site.).Here all the requirement is fulfill but i dont know what is going to wrong.
I wasted my 2 days behind solving this issue , now i am tiered ,So please any one have solution for this issue.
Help me please.
Thanks in advance.
Regards,
Ketan Gohil
([email protected],[email protected],[email protected])

Refer this link,
http://social.technet.microsoft.com/Forums/sqlserver/en-US/a8591747-689d-4a2e-b301-86094daf6cec/unable-to-install-sql-server-ce-server-tool-on-sql-server-2000-sp-4?forum=sqlce
http://www.vbforums.com/showthread.php?472623-Compatible-SQL-Server-CE-installer
Regards, RSingh

Error while installing Ver. 9 server tools

Hi Experts,
I am getting attached error while installing server tools for Version 9.
I am able to connect to sql via TCP/ IP and is working fine.
Please help.
Regards
Deepak

Hi,
Please check this thread:
http://scn.sap.com/thread/3376454
Thanks & Regards,
Nagarajan

Error while installing SAP Business One 9.0 Server Tool

Hi,
Here is my landscape idea: I would like to have License server and application server installed separately. I had License server 9.0 PL09 and application server already installed.
I uninstalled the server tool from my license server machine and tried to install PL10 server tool. However, i am getting a screen where I have to select a filename for SLD backup and hen I click on browse, its all blank. Please could you help?
I have attached the screenshot of the same.

Hi,
Me too faced the same issue
Open regedit find for SAP
Dont forget to check match whole string only. And click find.
HKEY_LOCAL_MACHINE--> Software --> Wow6432node--> SAP
Delete the sap folder then it works fine
Regards,
Siva

Mac mini server how many clients serve same time

mac mini server[lion server] how many clients serve same time, the web server, suppose only traffic the web server?
macs/PCs with server OSs designed for work as normal, but more mainly for left on, connected and serve clients on the internet eg web server, mail server? T/F

Thanks for your help. I actually forgot that I posted this and when I saw the email telling me you sent a repsonse I then did another search (using a different phrase) and I found this:
https://discussions.apple.com/thread/4554036?start=0&tstart=0
I think that is saying that I can do what I am asking.

How to Uninstal Server Tool

Similar Messages

Maybe you are looking for