How to uninstall bootcamp partition if the assistant only gives me the option to install bootcamp?

I am trying to uninstall my Bootcamp partition but when I open bootcamp assistant it only gives me the option to install a bootcamp partition.
Thanks

Either use Paragon's CampTuneX to resize it or use Boot Camp Assistant to remove the partition and restore the drive to one partition. Then create a new, larger Boot Camp partition. This will remove/delete/erase your Windows system.

Similar Messages

  • I started Boot Camp on a MAC mini but then  had a power failure after 30 secs :( Now when I start Boot Camp the option to install Windows 7 is gone.  In it's place is Remove Windows 7.  It seems to hang at Partitioning disk  Can I recover?

    I started Boot Camp on a MAC mini but then  had a power failure after 30 secs Now when I start Boot Camp the option to install Windows 7 is gone.  In it's place is Remove Windows 7.  It seems to hang at Partitioning disk  How can I recover?

    Welcome to the Apple Support Communities
    That's because the Boot Camp volume was created, but your Mac hasn't been set up to start automatically from the Windows disc. Insert the Windows DVD and press C key while your Mac is starting to start Windows installation.
    If you want to make sure that everything is correct, open Boot Camp Assistant and choose the option to remove Windows 7. Then, open that application again, select the option to install Windows 7 and you will be able to install Windows as usual

  • I erased my windows partition using disk utility then realized I should have used boot camp, because now I can't resize the original partition and seem to be stuck with a ghost unusable space. Boot Camp now doesn't give me the option to install or re

    I erased my windows partition using disk utility then realized I should have used boot camp, because now I can't resize the original partition and seem to be stuck with a ghost unusable space. Boot Camp now doesn't give me the option to install or remove windows partition.

    Hi, Ralph,
    The problem is that I did erase the partition, using disk utility, but I can't go back to my original disk size pre-partition, as disk utility won't let me do it and gives the message "Couldn’t modify partition map because file system verification failed." When I try to use Boot Camp Assistant it won't let me select the third option to remove windows.

  • HT3207 My Energy Saver section of system preferences does not show the option to choose between energy saver or higher performance. I'd like to maximize my performance... any idea how to do that or why the option isn't hsowing up?

    My Energy Saver section of system preferences does not show the option to choose between energy saver or higher performance. I'd like to maximize my performance... any idea how to do that or why the option isn't showing up?

    Mac video card performance

  • Boot camp wont show the option for installing via iso file

    version 5.0.2(462)
    the boot camp doesnt show the option to install the windows  via iso file
    i wanna install windows 7 via an iso file
    plz help me as soon as possible

    That option is only available for Macs without a built-in SuperDrive (the MacBook Air, Mid 2011 and newer Mac minis, the Late 2012 iMac, and the MacBook Pro with Retina display).
    If you haven't got one of those computers and Boot Camp Assistant doesn't show the option to install Windows 7 from a ISO file, your Mac doesn't support the Windows installation from a USB because it's restricted by firmware to a Mac without a SuperDrive. In this case, you have to buy Windows 7 on a DVD from eBay or Amazon, and use it to install Windows through Boot Camp.
    If you still wants to install Windows from a ISO file, the only option is to install it on a virtual machine, using an application like Parallels, VMware Fusion or VirtualBox

  • I'm applying for jobs online through my iPad using the safari app. For some reason when I try to attach my resume, which I have saved in Pages, it does not give me an option to go to Pages. It only gives my an option to choose a file from photos. Does it

    I’m applying for jobs online through my iPad using the safari app. For
    some reason when I try to attach my resume, which I have saved in
    Pages, it does not give me an option to go to Pages. It only gives
    my an option to choose a file from photos. Does it not have the
    capability to choose a location other than photos??

    No. Safari does not have the option to attach files for uploading other than photos.
    Look at iCab Mobile in the App Store. There are other browsers that may do this, but I'm pretty sure that iCab will fill the need.
    iCab Mobile (Web Browser) on the App Store on iTunes
    take a look at this.
    http://www.icab-mobile.de/faq.html

  • HT1926 Every time i go to the apple homepage and click on the iTunes 10 update, it doesnt allow me the option to install. What should i do?

    Every time i go to the apple homepage and click on the iTunes 10 update, it doesnt allow me the option to install. What should i do?

    Go here -> http://www.apple.com/itunes/download/

  • I downloaded ADE today on my Mac but I cannot open it. It is showing up as a disk and is only giving me the option to install but not open.

    I downloaded ADE today on my Mac but I cannot open it. It is showing up as a disk and is only giving me the option to install but not open. Help.

    After installation, you'll be able to open ADE.

  • I am trying to configure some new unsupervised iPod touch 4th generation using Apple Configurator but it won't give me the option to install the app that appears on the Apps tab.

    I am trying to configure some new unsupervised iPod touch 4th generation using Apple Configurator but it won't give me the option to install the app that appears on the Apps tab. I have tested the to see whether it works in supervised mode and it does but in Prepare mode it won't let me tick the box.
    Any ideas anyone?
    Many thanks
    Mario.

    The requirments say:
    Requirements: Compatible with iPhone 3GS, iPhone 4, iPhone 4S, iPad 2 Wi-Fi + 3G, and iPad Wi-Fi + 4G.Requires iOS 5.0 or later.
    No mention of iPod touch
    http://itunes.apple.com/app/jack-boxer/id530122469?mt=8

  • Please Help: How to uninstall Bootcamp 2.0 so I can reinstall it?

    Hi,
    OK. So the Bootcamp 2.1 update is not working for me. My last resort is to uninstall Bootcamp 2.0 and reinstall it from the Leopard disks. Some people have said that they have done that and were then able to install Bootcamp 2.1.
    So how do I uninstall Bootcamp 2.0? Do I do that from the Windows side or Mac OS X side? I am thinking I need to do that from the Mac OS X side because all there is with Windows is Boot Camp Services. But I want to make sure.
    Also, if I do uninstall, will I lose my current Windows Vista 32-bit partition?
    Thanks.

    I tried that. It removes the Boot Camp tool from the system tray, but it does not return XP to the state it was in before the Boot Camp install. Video, sound, network, and other drivers installed by Boot Camp are still working. At least that was my experience.
    Jan

  • How to create a partition using the free space of an existing[SOLVED]

    Hi Guys,
    Since I could not install fifa 09 using wine on linux, I need to create a partition where I can install windows first in order to install fifa 09 on it. How can I create a partition using the rest free space of my , for example, /home partition?How can I do it in a secure way (meaning without doing something to my existing archlinux installation files and system files) ?
    Thanks.
    Please see this post:
    https://bbs.archlinux.org/viewtopic.php?id=109402
    Last edited by Archie_Enthusiasm (2010-12-08 19:23:46)

    Use Parted Magic. But you *should* backup any important files just in case, regardless of method you use. You never know. Someone could unplug your computer, a power surge might happen, etc. A cousin of mine actually did something similar while I was gaming, the extension cord has a red button which he "accidentally" pressed. I would've cracked his skull had he done it while resizing a partition.
    Anyway, the partitioning scheme should be the first thing you do when you decide go this route (dual booting). I remember about a year ago I forced myself to use Linux by formatting the entire drive to ext4, except for the 2 GB + 20 GB ntfs partitions. It was what kick-started me on this path. Here's my partitioning scheme for both computers, maybe you'll get an idea and do something similar:
    Older computer:
    2 GB ntfs - MicroXP
    8 GB ext4 - Arch Linux + Home dir (to keep the dot files organized in one place)
    20 GB ntfs - games partition
    Rest is for media, formatted as ext3 with inode 128 (so it can be loaded as Read-Only in Windows too via Ext2fsd so they won't be affected in case of a virus infection)
    New computer:
    20 GB Windows 7
    10 GB Arch Linux + home dir
    50 GB games partition
    Rest of the space is ext4 mounted to /media
    Note that they're all primary partitions for remembering easier (sda1, sda2, sda3, sda4) instead of a combination of primary and extended which would probably look like sda1, sda5, sda6, sda7, etc.
    Last edited by DSpider (2010-12-03 13:02:26)

  • How to uninstall Inquisitor and use the updated AcidSearch (in Leopard)

    Title says it all I think - I loved AcidSearch - enough that I didn't use Safari 3 (beta) in Tiger because it killed AcidSearch and when I migrated to Leopard I missed it dearly and have been getting by unhappily with Inquisitor. Now there's a new AcidSearch and it's installed but my search tab is still controlled by Inquisitor - which I can't remove.
    The two ways to remove it that I've found while googling are running the install app again and clicking 'uninstall' - however that isn't an option - it just installs over the top over and over - or by removing it from the Input Managers folder in Library - but that's seemingly a Tiger-only folder now and there's nothing Inquisitor-related in it...
    I guess the other question I have is actually which is better - I only just now realized I can add search engines to Inquisitor - so that might make it very functionally similar to AcidSearch. I don't have very fast broadband, so I feel the predictive element of Inquisitor is useless.
    Any thoughts on which is better and/or how to uninstall Inquisitor (so I can choose!) would be greatly appreciated!

    Hi Alex,
    I just installed it to see where it places files, and the only place the latest version seems to install anything is in Hard drive -> Library -> Input Managers.
    It also (annoyingly) renamed my users Input Managers folder to what you have, i.e. Input Managers-Tiger (I have Cocoa Gestures in there, which was working just fine Mr InquisitorX developer...)
    After deleting the Inquisitor bundle from the top level Input Managers folder and restarting Safari it appears to have gone.
    What version were you using before? Have you tried downloading the same version from versiontracker.com and seeing if the uninstall in that version works?

  • How to make Vista partition on the HDD as first one with Recovery CD

    Hello,
    i want to format and recover the information to my "Vista" (C://) partition, which is the first. But when i choose the option "Format and recover to an existing first partition on your hard disk(without RE)" the computer began to recover to "Partition Type: windows NT NTFS (ID: 07)" which size is only 1.50 GB.
    In the middle of the process it shows "not enough space on a disk"
    Question: how to make "vista" partition the first one? What is "the first partition" in the second option of formating and recovering the system?
    Thank You for Your answers

    Hi
    You can obtain from your friends (I am sure someone has it) Microsoft WXP installations CD and install OS on C partition. On Toshiba download page you will find chipset and all necessary drivers to make WXP running properly. When finished connect external HDD or USB memory stick and copy all your data there. you can also install Nero demo version and create data CD or DVD. It is lot of work but if you have time you can do this without any problems.
    Other way connect your HDD as external one to other PC and copy all your important data. Sorry but I do not see other solution.

  • How to uninstall a program in the macbook?

    Any answers?

    Thats right Trevor. If you re-install OSX, you can select what programs you want on your HD.
    You can also get a program called AppZapper it costs $12 but it has gotten great reviews. Here's the link...
    http://appzapper.com/
    Lastly, you can go to the "Spotlight" and search for the program you want to uninstall or delete, select the files from Sportlight, and send them to the trash.
    Hope this helps,
    -Nick

  • Bootcamp 3.0.4 on Snow Leopard won't give me the option to install Windows XP

    Created a partition to install Windows using bootcamp assistant 3.0.4 on Mac Pro running Snow Leopard, however the only option it can give me is for Windows 7 and above, and it refuses to recognise my Windows XP disc.
    How do I download previous versions of Bootcamp that do support Windows XP? Or how do I work around this to install Windows XP myself? Step by step help please, as I am a novice.

    There is no support software download for XP. Here are the system requirements from http://support.apple.com/kb/HT5634 for your Mack Pro.
    Mac model
    Windows 8, 64-bit
    Windows 7, 64-bit
    Windows 7, 32-bit
    Windows Vista, 64-bit
    Windows Vista, 32-bit
    Windows XP, 32-bit
    Mac Pro (Late 2013)
    5
    Mac Pro (Mid 2010)
    5
    5
    4
    DVD
    DVD
    DVD
    Mac Pro (Early 2009)
    5
    5
    4
    DVD
    DVD
    DVD
    Mac Pro (Early 2008)
    4
    4
    DVD
    DVD
    DVD
    Mac Pro (Early 2007)
    DVD
    Mac Pro (Mid 2006)
    DVD
    The only XP support software is located on the Snow Leopard install DVD.

Maybe you are looking for

  • Number of entries in each table

    Hi, I have a requirement to find the number of entries in each table in the system, how do I find this? If I have to goto each table & find out it is a tedious job. Do we have any standard report kind of thing to find out the number of entries in all

  • How to Import Custom Scale using Field Piont I/O

    I need to READ   a 0 to 100 Newton strain gauge on graph chart.  It is a full bridge with an excitation Voltage of 10V.   The field point Input module FP-SG-140 is configured for a range of -3.9... to +3.9 mV/V I know how to create a custom scale usi

  • Im installing cc on my imac os 10.9.4. The install window is up and the blue wheel is turning now for approx 1hr

    How long should this take, considering I am on a fiber wifi.

  • Remuneration Statement Problem

    Hi Guys, I have a problem in remuneration statement in payroll,the problem is it is not printing whatever intput i am giving while configuring the form in PE51;i in details give what the step i have followed in payroll & also the error that i am faci

  • Can iTunes handle Greek correctly?

    I recently received a directory of a bunch of old (1920s, 302) Greek recordings, which of course were all labelled in proper Greek. The directory list displays fine inside a Terminal window on my Macbook Pro. So I told iTunes to load the directory. T