How to uninstall EBS 12.1.1 on windows 2008 Server

Hi All,
I think I just crashed my installation and I would like to remove it and start from scratch. How can I do that. It was something like removing registry entries (to get rid of the services), clean the path env, delete the files... but I can't remember all of it!
Thanks,
Konrad

Hi konrad;
Firstlt i suggest try to make installation on Linux, its more easy and more controlable
Maybe for you, but not for me ;-). Never had a Linux in front of me...No body born as linux system admin :) You could start to learn ;)
For uninstall steps please checj Hussein Sawwan posts
How to Uninstall R12 on XP
Re: How to Uninstall R12 on  XP???
Thanks! That is what I was looking for...Thanks Hussein Sawwan not me :), he made this great post
Regard
Helios

Similar Messages

  • How to install a plugin on 64 bits windows 2008 server?

    From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

    Hi Everyone,
    I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
    "Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
    http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
    Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
    Awaiting your response.
    Farid

    Hi ,
    LMS 3.2 is not supported on Windows 2008 Server Standard R2.
    here is the supported platoform for LMS 3.2
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
    Thanks,
    Gaganjeet

  • Install and uninstall of Oracle 11g R2 on Windows 2008 Server

    Hi,
    I installed Oracle 11g R2 and set up a database on Windows 2008 Server following the steps in the Installation Guide and it was successful. After uninstalling the product and doing a re-install, the step to configure the Net Configuration Assistant fails with the following msg.
    Failed to allocate port(s) in the specified range(s) for the following process(es): JMS
    [5540-5559], RMI [5520-5539], Database Control [5500-5519], EM Agent [3938] | [1830-1849]
    Also, when I ran "netca.bat" and tried to reconfigure the Listener, it indicated the default port 1521 is being used. I ran "netstat -an" and do not see the port listed.
    Questions:
    What is the best way to check if something was leftover from my previous install of Oracle that is using the default ports?
    What do I need to do to ensure a re-install is successful?
    Uninstalling Oracle -
    1.     Log in as the Administrator.
    2.     Stop all Oracle Services.
    3.     From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
    4.     Delete the C:\app\oracle directory.
    5.     Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
    HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

    Johan, after I uninstalled Oracle, I checked to ensure there were no remaining Oracle services remaining.
    Srini, below are the steps I followed to uninstall Oracle. In step 3, I just ran deinstall.bat without any parameters and provided required information as prompted. Note, I uninstalled using the Administrator user and not the "oracle" account that I used to install Oracle.
    Uninstalling Oracle -
    1. Log in as the Administrator.
    2. Stop all Oracle Services.
    3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
    4. Delete the C:\app\oracle directory.
    5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
    HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

  • How to create listener in 11g RAC on windows 2008 server

    Dear All,
    i worked on win 2003 and linux 4, 5 too. i have installed oracle RAC on both windows and linux.
    now i have installed oracle RAC11gR1 on windows 2008 server.than installed oracle software . now i want to create listener from db_home which i am facing problem.
    i m starting netca from db_home. following the insturction when i finishing it , the proces get started but in the middle is showing the listener on node1 and node2 can't be created.
    please guid me how i willl be able to creat it.
    2nd poing how to create asm instance on RAC11gR1. is it need to install saparate home like 10g for that or i can create from 11g software home.
    thanks,
    sher khan

    thanks for the update ,
    dear oracle 11g rac recomends to create ocr and voting disk on asm.
    i followed the documents they are saying you have to install grid control infrastructure and than need to create asmcfs.(automatic storage management cluster file system.).
    how to create asmcfs to avoid the gridcontrol, if its must is it need to install on one node or both nodes.
    can you plz guide me how to do this .
    thanks,

  • How to monitor oracle 11g database sessions on Windows 2008 server?

    Hi Experts
    How to monitor the Oracle 11g database sessions on Windows 2008 server (other than SQL Developer tool), which procedure or query is taking more time with Java application.

    Recently i found this tool- myorasql on the net to monitor the performence of database, easy to setup and check the performence.  i never tested it but seems impresive.  It is free and i think it would be use ful to you.
    http://myorasql.com/
    You can also use Quest - Toad or sqlplus if you are very good at sql commands and all dictionary tables or OEM/EM grid if it is configured .

  • How to develop a plugin for 64-bit windows 2008 server?

    I have developed a plugin to open local application from web pages, but the plugin could only run on 32-bit windows and 32-bit and 64-bit windows 7, it couldn't work on 64-bit windows 2008 server. The plugin was compiled by vs2008 studio on 32-bit windows xp. Any instructions or advices, men of genius? Thanks

    Hi Gnittala,
    Thanks for your reply.
    I debug the javascript code in firebug on windows 8 and found that firefox would be not responding while executing "document.body.append(myPlugin)".
    My javascript code is below:
    function openLocalApp(cmdPath, cmdLine) {
    var npMyPlugin = navigator.mimeTypes["application/mozilla-npruntime-scriptable-plugin"];
    if (npMyPlugin) {
    var myPlugin = document.createElement("embed");
    myPlugin.style.visibility = "hidden";
    myPlugin.type = "application/mozilla-npruntime-scriptable-plugin";
    myPlugin.width = 0;
    myPlugin.height = 0;
    document.body.appendChild(myPlugin);
    myPlugin.foo(cmdPath, cmdLine);
    } else {
    alert("Failed to create the plugin!");
    And firefox plugin's source code copys from the following link:
    http://mxr.mozilla.org/seamonkey/source/modules/plugin/samples/npruntime/
    Just changed a little.
    I know the sample is very old, but newer proper sample couldn't be found. So if you can give me a newer sample, I'll appreciate.
    Thanks again.

  • Will Windows 8.1 uninstall Windows 2008 server

    I have a test box with windows 2008 server install.  I now want to UNINSTALL windows 2008 server and INSTALL windows 8.1. Do Need to uninstall windows 2008 server first or will Windows 8.1 uninstall it for me?
    thanks in advance.

    Hi,
    If Windows Server 2008 is considered no more useful, we may take a clean install of Windows 8.1 and choose to format the whole drive. And it is recommended to take a Windows Server 2008 backup first, just in case.
    Some reference:
    How to perform a clean installation of Windows
    Blog:
    Step-By-Step: Completing a Clean Windows 8.1 Install With a Windows 8 Key
    If any further help needed, please feel free to post here.
    Best regards
    Michael Shao
    TechNet Community Support

  • Windows 2008 Server crashed - How to find location of remote shared files that they used to access on remote web app?

    We have a client that was running windows 2008 server.  A previous IT person had setup their system, so we were walking into a situation where there were many unknowns.  Server was mainly handling emails only, and we were able to get their exchange
    database off and export PSTs to hosted exchange via microsoft.
    Everything went fine with that, however one user said that he used to access files on the server via the remote web app as he described.  He would go to the following url:
    https://mail.theirdomain.com/remote/menu.aspx#
    and he would use his login and then he would see several links to folders.  He could then click on those and see his desired files.  
    We were able to get the server booted again, however we could not find any of the files he described on it at all, leaving me to suspect that perhaps this remote link was accessing another PC.  
    We have the old server up and running, however the link above is no longer active because we have pointed the domain to the new hosted exchange server.  As I am still learning and my boss wanted me to research this on my own and figure out how to find
    out where these files are located.  Any advice would be greatly appreciated.  
    Just as a note I did try access mail.localhost.com/remote/menu.aspx# on the server but this did not work.  Is there any way in the IIS 7 management console to figure out where this was pointing to?  

    I figured it out - The server was using sharepoint to host these files.  I browsed localhost:987 and opened the sharepoint site locally on the server.  They had several documents to be exported, however when clicking on Open in Explorer it was
    giving an error that local client was not configured.  I installed Desktop Experience and after that was able to open it in Windows Explorer and copy all files off.  

  • How can i get a link to download windows storage server 2008 standard

    how can i get a link to download windows storage server 2008 standard

    Hi,
    Please find the below link for storage server and its resources.
    Windows storage server
    Regards, Ravikumar P

  • How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

    How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
    How many database will play in this role.
    Best,

    hello
    I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
    Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
    And, can you pls elaborate on this point
    e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
    Pls send me the details at [email protected] or you can contact me at 08054641476.
    Thanks in advance.

  • How can I open all ports on a Window 2003 Server

    How can I open all ports on my windows 2003 server for a specific range of IP addresses?

    Hi,
    Just want to confirm the current situations.
    Please feel free to let us know if you need further assistance.
    Regards.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • EBS software or installer for windows 2008 R2 84 bit

    Not able to find the oracle EBS software or installer for windows 2008 R2 64 bit operating system. Let me know if Oracle EBS media is available for windows 2008 R2 64bit operating system

    Hi;
    The Oracle E-Business Suite Rapid Install media for Windows presently only supports an installation on 32-bit Microsoft Windows Server (2003, 2008).
    Please see:
    Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
    Regard
    Helios

  • How to uninstall ebs patch 5097966?

    Dear All,
    I have installed ebs patch 5097966 on ebs11.5.9 environment by using adpatch utility. The processs completed successfully.
    But I found the patche isn't my requirement, the patch must be uninstalled from our system. I don't know how to uninstall it.
    Can you help me on it?
    Thanks & Regards
    Owen

    You do NOT need to apply patch 4561451 (Oracle XML Publisher Release 5.6), instead you need to apply the following patches:
    1) Patch 4905678 (Oracle XML Publisher Release 5.6.1)
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=357308.1
    2) Patch 5097966 (Oracle XML Publisher Release 5.6.2)
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=367394.1
    Since you have already applied patch 5097966, then you just need to apply patch 4905678. Please follow the instructions in the note: 357308.1 carefully. Once you are done, you will be running the latest version of Oracle XML Publisher which is 5.6.2
    Btw, I like your name since I am a big fan of Michael Owen :)

  • How to clen up the R12  Instance in Windows 2003 server.

    Hi,
    We have two R12 instances running on the same server (vision and Development).
    and want to scrap Vision instance.
    Please explain me how to uninstall the R12 Application instance.
    The Note 107523.1: How to Clean Up a Failed Install of Oracle Applications 11.5 on an NT Platform.
    But it deletes the entire instances running on the same server.
    Thanks and Regards
    Vasu

    Hi,
    Please remove the 3 non-exists DC from environment using the metadata clean-up process using script from below article. then manually delete the records from DNS management console as given below.
    https://gallery.technet.microsoft.com/scriptcenter/d31f091f-2642-4ede-9f97-0e1cc4d577f3
    Manual steps to clear the records.
    Dnsmgmt.msc [Dns Management]
    A.Expand the forward lookup zones\_msdcs folder
    i. Make sure only the actual domain controllers are listed, delete wrong Alias recordsremove wrong name server records
    ii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_sites_\sitename\_tcp] > delete incorrect _ldap and _kerberos records are listed.
    iii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_tcp] and delete incorrect _ldap and _kerberos records
    iv. Expand the [forward lookup zones\_msdcs.domain.com\domains\guid\_tcp] and delete incorrect _ldap entries
    v. Select [forward lookup zones\_msdcs.domain.com\gc] – delete incorrect HostA records
    vi. Expand the [forward lookup zones\_msdcs.domain.com\gc\_sites\sitename\_tcp] – delete incorrect _ldap entries
    vii.Select the [forward lookup zones\_msdcs.domain.com\gc\_tcp] – delete incorrect _ldap entries
    viii. Select the [forward lookup zones\_msdcs.domain.com\pdc\_tcp] – delete incorrect _ldap entries
    B.Expand the forward lookup zones\domain.com folder
    i.Delete Host(A) records of dc’s which are non-existant.
    ii.Correct the NameServer (NS) records
    iii. Follow steps similar to ’ A ii ‘ >> ‘ A viii’
    · Dssite.msc [Sites and Services]
    A.Expand the [Sites\Sitename\Servers] – delete incorrect server’s
    B.Delete incorrect subnet configurations [Sites\Subnets]
    C.Delete incorrect site links [Sites\IP]
    · Make sure the domain controllers are pointing to the correct dns servers in tcp\ip settings.
    · Force replication – ‘repadmin /syncall’

Maybe you are looking for