How to Uninstall iTunes when not in Add/Remove

How do you uninstall iTunes when it does not appear in Add/Remove programs. For the record, I have used the Window Install Clean-up Utility as described in another thread. Although iTunes appeared in the utilities' list, and seemed to process my request to uninstall (it disappeared from the list), all iTunes program files still remain on my computer, and the icon still appears on my desktop.
Thanks - Jeff.

I figured it out.

Similar Messages

  • I have changed computers and the new user of my old computer wants to use itunes. i deauthorised the computer and uninstalled itunes. when he reinstalled itunes all my songs and apps are still there. how do i get rid of them for him?

    i have changed computers and the new user of my old computer wants to use itunes. i deauthorised the computer and uninstalled itunes. when he reinstalled itunes all my songs and apps are still there. how do i get rid of them for him?

    Erase the internal drive and install a fresh OS.
    (104285)

  • How do i uninstall McAfee from new G500 windows 8.1 laptop. It's not in add/remove programs

    Nice going Lenovo with NOT listing McAfee with the add/remove programs. How do I remove it. I can't use the McAfee tool until I uninstall the conventional way via add/remove programs.

    Hello,
    Have you tried the McAfee Consumer Product Removal Tool to uninstall the software?
    If you'd like additional information, here's a blog post I wrote on how to uninstall anti-virus software:  The Secret Guide to Uninstalling Any Anti-Virus Software.  Perhaps it will be of use to you.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • How to download itunes when you get runtime error R6034?

    HOW TO DOWNLOAD ITUNES WHEN YOU GET RUNTIME ERROR R6034?

    I obtained this information from    http://www.elabcommunications.com
    If you tried installing the latest iTunes on your Windows machine and it failed with this error message Runtime Error Message R6034, try this:
    Go to Control Panel > Add or Remove Programs (Windows XP) or Programs and Features (Newer Windows)
    Uninstall all of these items in the exact following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot your computer system, download iTunes, then reinstall using an administrative account or right-click the downloaded installer file and select Run as Administrator.

  • TS1424 How to fix iTunes when you get this you can download past purchases on this computer with just one apple ID every 90 days. This computer can be used with a different apple iD in 50 days

    How to fix iTunes when you get this you can download past purchases on this computer with just one apple ID every 90 days. This computer can be used with a different apple iD in 50 days

    hi i dont know if this will work for anyone but i had not been on itunes for sometime but today i went on to watch a new episode of walking dead but it said i still had to wait 36 days out of the 90days , i managed to get my episode to download load by clicking my apple id in itunes going to account and at the very bottom off the page there is a button that says reset all warnings for buying and downloading i pressed this then it let me download hope this works for you worked for me

  • How  do I unstall elements 6 in XP it's not in Add/Remove Programs

    I had elents 6 and when I installed 7 it said I didn't have to remove 6, so I didn't, just in case I didn't like 7 or needed 6.  Then I forgot about 6 being there and when I installed 8 it said I didn't have to uninstall 7, so I didn't uninstall it either.  Now I found 6 and want to uninstall it but it is not in Add/Remove Programs,  I searched the KB and it said when it couldn't be uninstalled with Add/remove you could do it manually.  then the directions for manual uninstall says Open Control Panel, go to Add/Remove programs, and uninstall Elements 6.  So it says essentially "if you can't do "This", then "Do This".
    After listening to music for about 40 minutes on the telephone, the Tech Support guy said I would have to pay him $40, or go to the KB .  I told him that the information in the KB was wrong when you searched "Uninstall Elements 6" and he said the only thing I could do was pay him $40, non refundable, and that if something went wrong with one of the other Adobe programs I would have to pay them to fix that!
    ANY SUGGESTIONS. . . PLEASE, otherwise I'll just leave 2,000+ files that take up half a gig, and hope it doesn't give me other problems in the future.  I was considering just deleting the Elements 6 folder and then use system mechanic to fix the registry.  or IF I can find the original CD, can I use it to uninstall it, or could I reinstall it, without it screwing up my 7 and 8, and see if it shows up in "Add/Remove Programs"?

    Find the original CD and launch the Setup.  If it doesn't give you the option of removing the current installation, install PSE 6 again and then uninstall it from the Control Panel.
    If that doesn't work, then you can follow the instructions in the tech note that you were reading:
    http://kb2.adobe.com/cps/408/kb408483.html
    Just skip the first section, "Run the Photoshop Elements 6 Uninstaller".  The remaining sections will lead you through a manual removal.  (I agree that the instructions are confusing.)
    But it's better to do reinstall and then uninstall if you can.

  • How to uninstall itune and reinstall it again?

    how to uninstall itune and reinstall again?

    Before you try un-installing iTunes you need to de-authorize the computer (otherwise, as I found out the hard way, iTunes will think that you've got 2 authorized computers on your account instead of just one).  You should also make sure that you have full backups of all your media content.  You can also back up the iTunes library file which contains your ratings, play counts, etc... which, depending on the size of your library, will save a bucketful of time after the re-installation.
    If you've on a pc then the uninstall itself works the same way as if you were uninstalling any other software: go to Add or Remove Programs, select iTunes, click "Remove"... and wait (it'll take a while to complete).  Then go to the iTunes website and download it.
    After that, you can re-load your media files, and import the library, from your backups.  iTunes should work just as well as it did before the re-installation.
    Hope this helps!

  • How to uninstall iTunes in mac and then install again

    how to uninstall iTunes in mac and then install again

    You should be able to simply visit: http://www.apple.com/itunes/download/ to download iTunes, and run the installer to overwrite your previous version...
    Lamborghini98 wrote:
    I want this because i can't restore my iphone 4 with my mac
    I don't think this will fix your problem with restoring your iPhone 4 though. That is likely a seperate issue.
    but i can do it with any windows?
    Yes, you can theoretically restore your iPhone with any computer running the most current version of iTunes (10.6.3) unless there is some other issue.
    I get error code(21)
    According to this support article: http://support.apple.com/kb/TS3694#error21:
    "These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service."
    Do you run any anti-virus or third-party firewalls on your computer? Try disabling them and trying the restore process again. It may be possible that one of these security applications is interfering with the iPhone's ability to authenticate with Apple's servers.

  • How to remove old NI Imaq if it is not in add remove programs

    I am upgrading from 6i to 8.o fo rlabview and vision development module.
    I need to remove my old IMQ before the new one will install.  It is not listed in my add/remove programs.  How do I remove it?

    Hi rscconrad,
    IMAQ 2.5.1 was a subcomponent of the LabVIEW installation and will reinstalling LabVIEW to remove the component. 
    Uninstall LabVIEW 6.x using Add/Remove Programs. This will remove the previous version of IMAQ.
    Install LabVIEW 6.x (or if possible, just install LabVIEW 8.0).  You will need to customize the 6.x installation so that IMAQ 2.5.x is not installed.
    Proceed with your upgrade.
    I hope this works for you.
    Regards,
    RyanF
    Message Edited by RyanF on 01-26-2006 02:07 PM

  • How to make iTunes Match not convert my files ALACs in 256 kbps (VBR)? How to get iTunes to convert CDs to Apple loselss?

    How to make iTunes Match not convert my files ALACs in 256 kbps (VBR)? How to get iTunes convert CDs in Apple loselss? The difference between 256 (VBR) and Apple Losless is very clear...

    Dear Michael, good day!
    1. As per your instruction, I turned off iTM.
    Small discrepancy – where are two screens with iTM switch:
    -Settings > iTunes & App Store. 
    -Settings > Music
    I switched OFF in both.
    NB: I turned device to English for convenience.
    2. My next step was Setting > General > Usage – tapped {Music};
    {All music} screen appeared; I swiped it and taped Delete. 
    3. I performed “hard reset” …………………………………..
    4. Switched back On iTM
    5. Taped Music app on Home screen
    iTM has started –  (it took 18 minutes  to completed, 60 mbps Wi-Fi speed )
    Regret to inform… All the same:
    Erase and reset to factory default? Or I did smf wrong?

  • TS3430 does anyone know how to fix itunes when you get the message that it has encountered a problem and needs to close

    does anyone know how to fix itunes when you get the message that it has encountered a problem and needs to close

    You are using ADE on Windows or Mac ? and their versions ??
    Please restart your machine and try once again.
    Thanks

  • How to uninstall itunes partially  down  load on Macbook pro

    How to uninstall itunes partially down load on MacBook Pro? My MacBook Pro only down load itunes 24% and than free unrespond.

    if it was only partially downloaded it shouldn't have installed at all: does your previous version of iTunes work OK?

  • How to Uninstall iTunes (for installing it latter)

    How to Uninstall iTunes from my Mac (for installing it latter)

    First, that is the jist of the message if you try to delete it. After that it is speculation.
    After that, you can't sync your iDevices, but the OP doesn't care about that. It also is linked closely with displaying and playing various media on the Mac.
    But then again, I don't think either of us are Apple developers. So why are you trying to bully your opinion on me, without offering any proof of your opinion?
    And you are the one who stated your position was an opinion
    I took the stance that we had opposing opinion.
    You have shown a way to do it, but just because you can, doesn't mean you should.
    Message was edited by: MacinNW_Brent

  • How to uninstall itunes in ipad2

    How to uninstall itunes in ipad2,
    I have the USA itunes but will change to Swedish.

    If you want to change the iTunes store on the iPad go to Settings>Store>Apple ID. Tap on your ID, tap View Apple ID and enter your password. Then scroll down to change Country or Region and tap that option and change the store there.

  • How DB adapter works when polling strategy is "remove row selected"?

    How DB adapter works when polling strategy is "delete the rows that were read"?
    I want to know how database adapter works when polling startegy is "remove row".This polling strategy helps for polling the changes to table and remove records after new records are inserted or changes are done to table.Here,i want to understand how DB adapter identifies which record to be deleted.
    For example: there is a table with 100 recorrds.How DB adapter works when polling strategy is "delete the rows that were read"?
    I want to know how database adapter works when polling startegy is "delete the rows that were read".This polling strategy helps for polling the changes to table and remove records after new records are inserted or changes are done to table.Here,i want to understand how DB adapter identifies which record to be deleted.
    For example:
    There is a table EMP with 100 recorrds.Now, i deploy a BPEl process with db adapter polling on table EMP for changes.So that ,if any change happen to records in table that records will be picked up.I use a polling startegy "delete the rows that were read" .
    Now i insert 9 new records and update one existing records.These 10 records should be picked up and then deleted by Db adapter.In this 109 records how DB adapter identifies these 10 records when it polls.How it differentiatess old records with new records when there is no flag field or no sequence id used to identify the new or modified records.
    Please let me know.
    Why i want to know this?
    Some times customer may not allow BPEL process to do any modifications to source table or source database.In this case the options provided by database adapter wizard are not useful.
    If there is any mechanism to identify new or modified records without having a FLAG field or sequence table,then it is possible to have an option like only read the changes from table rather than deleting the records after reading.Which helps in meeting above requirement.
    Please let me know if there is any way to do this.
    thanks
    Arureddy

    Once the record has been read it is deleted. Therefore, you can update rows in this table as many times you like before it is read. Once it is read there will be nothing to update as it will be deleted.
    If you don't want to use a sequence table, you can use a sequence file. You can only use this functionality if the key you are using increments sequentially. e.g. 1,2,3,4. If your key is random, e.g. 2,1,3,5,7,4 then your options are delete or use a processing flag.
    The other option is to create a trigger that inserts a key into a polling table when insert or updates occur. You can then use the delete, which is the most desirable as it uses database locking.
    cheers
    James

Maybe you are looking for

  • Select options in wddomodifyview

    Hi all. I am using two components. I pass a parameter from one to another one, and this value should be shown  in a field of a select options  (that has been created in wddoinit). The method  wddoinit is executed before the parameter has value. I hav

  • Production Order BADI or User Exit

    Hi All, I have a requirement in CO01 i.e when the production order is created. Once the Production order is saved, in CO01 the production Order data should be updated in a custom table. All this should be done in CO01.I tried to use the enhancement P

  • App issue (whatsapp) dont want to buy it because I already had it.

    I got my Iphone from a friend of my mother and I cant acces to Whatsapp from it because it asks me for his Apple ID, and I have mine and I want to use that App too but I cant even log in whatsapp, what can I do? (is hard to find that guy he works all

  • Rows to Columns conversion in an Internal Table

    Hello All, I have data like below: Matnr1  ABC  100 Matnr1  ABC  200 Matnr1  ABC  500 Matnr2  XYZ   300 Matnr2  XYZ   600 I want data like this: Matnr1  ABC  100  200  500 Matnr2  XYZ   300  600 Is it possible?  If yes, could anybody help achieving t

  • Error occurred (error code 0x8002006E).

    i try to burn dvd with pictures. i had the message The disc can't be burned because an unexpected error occurred (error code 0x8002006E). after i read everything and i try them like slow down the speed.. put another brand of dvd... after to put less