How to uninstall J2EE Engine 6.20 from BW 3.1 before starting upgrade BI

Hi all,
We hav BW 3.1 cont installed with J2EE Engine 6.20 and we started upgrade to BI 7.0
6.20 J2EE engine is of no use...so we planned to uninstall it before starting the upgrade and install as ADD in once the upgrade is over.
and we uninstalled also
When i start the SAPup phase its given info like J2EE Engine is running....
but nothing s running....
Pls advice on this
Regards
Karthik

thnx

Similar Messages

  • How to uninstall cxz engines

    how to uninstall cxz engines?

    Go to ~/Library/Application Support and delete the WineEngines folder.
    If not there, you have to go to the main Library on your hard drive (not your home folder one) and look under wine engines.

  • How can I remove the hard drive from an iMac g4 before recycling it?

    How can I remove the hard drive from an iMac g4 before recycling it?

    There are take-apart guides online.  For example
    http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
    However, you can also consider securely erasing the hard drive instead.  You can do this using a Mac OS X installation disc with a version that your iMac G4 can boot from the optical drive.  If this is a viable option, please post back (include Mac OS X version on installation disc).

  • How do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one., how do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one.

    how do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one., how do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one.

    If you don't have an icloud account, then icloud is not the thing that's popping up a window.
    If you are being asked to enter a password when accessing itunes, then the problem may be that you have purchased items (apps, songs, etc) on the device that were purchased using a different itunes account than the one you currently have defined on your device. 
    Purchased items are forever associated with the itunes account (the apple ID) that was used to make the purchase.  If you change the ID on the device, you won't be able to update any of them.  You'll have to purchase them again.

  • How can i connect my bookmarks links from Firefox, to favorites (location) start button then favorites?

    ''dupe of https://support.mozilla.org/en-US/questions/915455''
    How can i connect my bookmarks links from Firefox, to favorites (location) start button then favorites?

    *Plain old favorites: https://addons.mozilla.org/firefox/addon/plainoldfavorites/

  • With the new IOS7 I get every email in my inbox. How can I limit to the last 50 like it was before the upgrade?

    With the new IOS7 I get every email in my inbox. How can I limit to the last 50 like it was before the upgrade?

    You can set the pref <b>browser.urlbar.formatting.enabled</b> to <i>false</i> on the <b>about:config</b> page.
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold(user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • How to hide system related info (J2EE Engine, JVM, OS) from View Source

    Hi Experts,
    We are developing an external facing webdynpro application for our customers. When i  right click on webdynpro application in browser and select View Source , it is showing all system specific information such as  DC names including model DC , JVM , System OS information (below is  exact details).
    I believe this  will give enough information for Hackers to know about system with out much efforts. Is there any we can avoid showing this information part of browser view source.
    Your comments are  highly appreciate.
    This page was created by SAP NetWeaver. All rights reserved.
    Web Dynpro client:
    HTML Client
    Web Dynpro client capabilities:
    User agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; MDDR; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2), client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
    Accessibility mode: false
    Web Dynpro runtime:
    Vendor: SAP, build ID: 7.0013.20080513102531.0000 (release=NW04S_13_REL, buildtime=2008-05-15:05:17:09[UTC], changelist=41322, host=pwdfm114), build date: Wed May 28 15:51:08 EDT 2008
    Web Dynpro code generators of DC companyname.us/projUI:
    SapDictionaryGenerationCore: 7.0014.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:49:06[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro: 7.0014.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:51:55[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore: 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:37:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates: 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-10:16:06:13[UTC], changelist=466194, host=pwdfm101)
    SapWebDynproGenerationCTemplates: 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-10:16:06:13[UTC], changelist=466194, host=pwdfm101)
    SapGenerationFrameworkCore: 7.0014.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:36:46[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer: 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:55:29[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary: 7.0014.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:46:17[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon: 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:37:28[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCore: 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-10:15:55:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates: (unknown)
    Web Dynpro code generators of DC sap.com/tcwddispwda: No information available!
    Web Dynpro code generators of DC companyname.us/projECCModel:
    SapDictionaryGenerationCore: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro: 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    SapWebDynproGenerationCTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    SapGenerationFrameworkCore: 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary: 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCore: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    Web Dynpro code generators of DC sap.com/tcwdcorecomp: No information available!
    Web Dynpro code generators of DC companyname.us/projModel:
    SapDictionaryGenerationCore: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro: 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    SapWebDynproGenerationCTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    SapGenerationFrameworkCore: 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary: 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCore: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    J2EE Engine:
    7.00   patchlevel 34391.450
    Java VM:
    Java HotSpot(TM) 64-Bit Server VM, version: 1.4.2_13-b06, vendor: Sun Microsystems Inc.
    Operating system:
    Windows 2003, version: 5.2, architecture: amd64
    Edited by: Aravinda Boyapati on Nov 23, 2009 11:54 PM

    Hi Armin,
    I have the same behavior here. Prod is showing all this info. I assume this is some variable that we need to setup in Prod J2EE. Could you please tell me what is it?
    Also, would that change the stack trace? - Currently, we have WDP dumps in Prod, something that I would get rid off (and have just a 500 error page defined).
    Thanks,
    Daniel

  • How to uninstall Route 66 navigation software from...

    I am looking to update my sat nav application, but I looks like I need to uninstall the version that I currently have on the phone.  I looks like it's installed on the phone memory and not on the memory card because when I remove the card, the sat nav still works.
    I've looked everywhere and tried everything, but so far I haven't been able to figure out how to uninstall this appication.  Any idea?
    Thanks for any suggestions.

    Hi mike6221
    Apart from loss of data issue, a hard reset by keying in *#7370# followed by 12345 (default Nokia lock code) returning device to "out of the box condition" should do the job as N95 does not have User Data Preservation feature and all user installed applications will be deleted.  
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How to uninstall java 8 update 40 from my macbook air

    Using MacBook Air Mid 2012, software OS X 10.10.2.  Want to uninstall Java 8 Update 40 from my system
    as it is causing some problems in reading some files.  Could someone guide me how to do that as the Java
    software does not show in Applications folder and I am unable to find any other way.

    The feature is called Continuity.
    And it requires an iPhone using the same  Apple ID for Messages as the Mac, and that Text Message Forwarding be enabled in Messages settings on the iPhone.
    If all is set correctly, try signing out and back in of Messages on both the iPhone, and the Mac.

  • How to execute j2ee engine xample program

    http://portal address/index.html > J2EE Engine Examples->Message-Driven Bean Example -->The source files of the example are available here as a zip file.
    It contains jsps and java..
    how can I excecute in Netweaver. I have no idea of proper path to compile and excecute.. Can anyone help me?

    You might want to ask this in the Java developer's forum. It's not really related to KM and/or the portal...
    You'll need to get some exposure the NetWeaver Developer Studio and there are tutorials built in that can help you understand the process for doing Java development.
    Cheers and good luck

  • How to attach J2ee Engine....

    Hi All,
    I want to know that how can we attach the J2EE Engine to my WD Application..
    Pls Help me out......
    Regards,
    Dhruv Shah

    Hi,
    Is your J2ee engine is in your local system or in Remote I mean installed in another system.
    Based on your J2ee engine there s an option NWDS .
    Windows> preferences->J2eeengine--->Select the radio button based on your sever availability.
    If you select the remote server
    Messge server Host: EP host name
    Messge server Port :3601
    Otherwise select the second option
    server instance s attached automativcally.
    Thanks,
    Lohi.

  • How to uninstall Windows 7 Home Premium from my Satellite Pro C660?

    Hello,
    I recently got Toshiba Satellite Pro C660 -1T1 with that i got Windows 7 Home Premium. Now i want to uninstall this and load windows XP on this..
    I have removed Toshiba HDD protection prgram and try to Boot the XP cd.. Its going up to start windows XP installation and i am getting Blue Screen.
    Could you please help me how to uninstall this...? I am bit desperate your help greatly appriciated
    Thanks in Advance.
    Dileep

    I presume you are missing SATA driver.
    Please check this forum using advanced search option. You will find hundreds of threads where you can read how to install WXP on newer notebook model.
    BTW: create recovery DVD before you start to install own OS.

  • How do I retrieve photos/data etc. from my iPhone 4 before a completely erasing restore! It'stuck on a "connect to iTunes" to restore screen!  Help please!!!

    I connected my iPhone 4 to my PC to sync all my new info to iTunes/PC, but it said it was not able to recognize it and needs to do a complete restore!  How do I retrieve photos from my iPhone 4 before a complete restore! It'stuck on a "connect to iTunes" to restore screen and won't do anything else!  I tried rebooting the phone (holding the top button and the home button and the SAME "connect to iTunes" screen comes up.  If I restore, I will lose ALL my unsynced photos, apps, and data from the past week (INCLUDING pics from a concert WITH band members!) Help please!  MAYDAY!  My prior backup does NOT contain these photos/apps/data! Ahh!!!!

    I am having the same problems as this person. I see that someone said there is no way to retrieve the pictures once it gets stuck in recovery mode.
    Then further along someone said that there are data retrieval methods except they have something to do with jail breaking a phone.
    My phone is already jail broken. It was kind of a gift from the company I work for- it was a fellow employees before. He jail broke it and then it was given to me. After I got it I activated the 4 and tried to back up everything. It didn't work and "Springboard" forced the phone into safety mode. So I could use it with the old dude's apps and my contacts. I made the mistake of using the phone for wedding dress shopping with a friend. I took tons of pictures.
    After this I found out the messages I was seeing meant it was jail broken. At&t said to force restore the phone - iTunes wouldn't recognize it in safety mode. I'm an idiot and didn't realize what this meant for my pictures. It didn't work (error 1611) - thankfully. Now it is stuck in recovery mode (iTunes icon and USB cable picture).
    Can I access that media in any way? It never suceeded restoring itself so is it still there? The phone is jail broken already so is there a method I can use?

  • How to Uninstall Adobe Acrobat 9.0 from Vista?

    On my laptop (Windows Vista), I have a Adobe Acrobat 9.0 which I need to uninstall. It was giving me limited access and use. To remedy this, I installed, Adobe Reader 8.0. That works fine but when I want to read pdf files, the 9.0 version pops up first and gives me a message that I'm unable to read the file. I can't always elect "Save Target As" to opt to use the 8.0 version of Reader (i.e. viewing bank statements).
    When I went to delete Adobe 9.0 from my C drive, I was denied access because I "don't have permission".
    Does anyone know how to fix this?

    You can only uninstall from an administrative account. Be aware you are not supposed to have Reader and Acrobat on the same machine. Uninstalling Acrobat 9 will break Reader which will need to be re-installed. For Vista compatability make sure you update to 8.1.3 or later.

  • How to uninstall Forms and Reports 6 from XP?

    Dear Experts,
    I have an XP machine.
    On it, is Oracle DB 11.2. As well, there is Oracle Forms and Reports 6i. From the start, programs menu, there are:
    Oracle for Windows NT
    Oracle Forms and Reports 6I
    Oracle Forms and Reports 6I doc
    Oracle OLAP client 2.2
    Oracle Reports 6I
    Oracle Reports 6I Admin
    I notice that it seems to be running as service. I can find the process id / PID with sysinternals. PID is: 1364, services.exe(876). Some of the files/processes are:
    NL80.DLL, SQLNET. Ora805.dll. All under c:\oracle\reports6
    But I can't figure out which service it is, when I look at the windows services. Although the command line is:
    C:\WINDOWS\System32\svchost.exe -k netsvcs
    When I go to uninstall forms and reports using OUI, I see two Oracle homes.
    OraDb11G_home1
    DEFAULT_HOME
    Reports is listed under DEFAULT_HOME. But unlike OraDb11G_home1, in DEFAULT_HOME, there are no check boxes at all to select these products to uninstall.
    1)
    Without uninstalling the database, how can I uninstall forms and reports?
    2)
    How can I tell which service is running forms and reports?
    Thanks a lot!

    You can delete these items directly from Start menu and this is the first step :
    Oracle for Windows NT
    Oracle Forms and Reports 6I
    Oracle Forms and Reports 6I doc
    Oracle OLAP client 2.2
    Oracle Reports 6I
    Oracle Reports 6I Admin
    The second step : Delete the home of developer6i from registry
    And the third : Delete the directory (orant) which the contents of forms and reports 6i are stored in (c:\orant by default)
    When I want to delete forms and reports 6i I follow these steps above.
    hope that help you.
    Any comments from experts are very appreciated :)
    Edited by: Mohamed DEV on 23/04/2013 05:01 ص

Maybe you are looking for

  • Excise tab is not displaying in migo

    Hi, for one material, purchase order has done. when i am going to do migo against purchase order, the excise invoice & excise items tab is not displaying. note:- for all other materials(purchase order), excise tab is displaying. could you please solv

  • NOKIA N80 Internal Error Message PLEASE HELP

    Does anbody Know why I Get an Internal Error Message When I Send a Multimedia Message.... Everytime I Try to Send a Picture as Multimedia it Says Unable to Send Message and When I Click Details it Says Internal Error....... Please Help

  • PS12.0.4/ACR 6.3 Update errors - tried all fixes, no go.

    Got a D3100, said Camera Raw was outdated. Tried to update via update tab AND manual download, got "not applicable" error. Tried to update to Photoshop 12.0.4 via update tab and manual download, same "not applicable" error. Using CS5 Win7 64bit My Pr

  • SMSY_SETUP: via SLD: "The SLD server connection is inactive"

    Hi folks, setting up the Solman 4.0 and want to replicate our landscape from our System Landscape Directory. I followed the instructions in SMSY, set the RFCs etc. - set the user / pw in SLDAPICUST - in SMST_SETUP, in the expert settings: put the rig

  • Give me the functionality of transaction code st01

    give me the functionality of transaction code st01