How to uninstall MAX (Ver 2.0) after uninstall Labview 6.0

I have deleted the Labview 6.0 as well as NI-488.2. However, MAX 2.0 is still remaining and would like to know how to uninstall it. There's no program shown in Control Panel-Add/remove programs. And the remaining MAX doesn't work properly because missing some component.

You should not be deleting files like that beause those are MSI based installers. Even if you delete the files, MSI stores a lot of information in the registry.
The only easily way for you to install everything that MAX 2.0 came with and then uninstall them all from ControlPanel>>Add/Remove programs. That should take away MAX as well.
hope this works!

Similar Messages

How do I get my apps back after uninstall of Mtn Lion?

After I uninstalled Mtn Lion my Migration asst won't recover certain applications from Time Mach backup.
Says apps on Time Mach drive are 'newer' unreadable versions. How do I recover?
Apparently I should not have let the Lion anywhere near my white iMac. Whoops!
White iMac / OS 10.6.8 / Gdrive external for Time Mach backup

You will have to obtain earlier, compatible, versions of the applications either from an older part of the Time Machine backup or from the original sources.

How can I get my bookmarks back after uninstalling Firefox?

When uninstalling Firefox, it asked me if I wanted to delete my bookmarks, etc. I clicked in the check box to delete them, but after a couple days, I realized I should have saved them. Someone told me there is probably a temp folder that is hidden somewhere for just this reason. Can anyone help me get my bookmarks back please? Oh yea, my OS is Vista and I have reinstalled Firefox 3.6.8

You can try with an undelete program like Recuva if you can restore a JSON backup in the bookmarkbackups folder.
http://www.recuva.com/
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

Please!! I bought new computers. How to use applications on old computer after uninstalling iCloud

I started iCloud on a MacBook. I recently bought a iMac and a MacBook Air. I installed iCloud on the new computers. I understand I can only use two computers so I uninstalled iCloud on my MacBook. I had Creative Suite CS2 I believe before iCloud. So, now if I use my MacBook and open, say, Photoshop, Adobe Account Manger opens and says, "unable to connect to iCloud". And askes for user name and passwords. How can I stop this? I thought I can still use my programs because they are installed. Same goes with Acrobat. I have Acrobat XI. If say I get a PDF e-mailed to me and Acrobat opens up it says my trial version is about to expire. What gives?

Hi sik2bfree,
Have moved your post to a more relevant forum. The experts here are better placed to help you.
Thanks,
Preran

How Do I Reinstall Acrobat XI Pro After Uninstalling?

I have had nothing but trouble with Acrobat XI Pro since installing from the Creative Cloud. If a PDF from a client contains a comment or note, Acrobat crashes. If I try to open Preferences, it crashes. It does it intermitently. For awhile today I could do both, then it started crashing again. I've logged out and back in, shut down and restarted.
I've been poring over these forums all day and not seeing anyone with a similar predicament. Finally, out of frustration, I ran the uninstaller and tried to reinstall. Now the Adobe Application Manager shows that Adobe Acrobat XI Pro is up to date, even though it has now been removed from my system. I'm really screwed and on deadlines, Yikes! Please help!
I'm using a 24", early 2008 iMac, OS X 10.8.3, 4GB RAM.
Lauren

After 2-hours on the phone with Adobe help we traced the problem to old CS4 files. Here's how we fixed the problem:
1. We ran uninstallers on all the old programs.
2. Ran the Creative Suite Cleaner Tool (set to "All" not just Creative Cloud).
3. Trashed the Adobe Application Manager.
4. Shut down and restarted the mac.
5. Re-ran the Creative Suite Cleaner Tool to make sure there was NOTHING in the list at all.
6. Re-installed the Adobe Application Manager.
Finally Acrobat XI Pro was able to install properly. Whew! I hope this helps someone else.

PCI-7344 not found in MAX 3.1.1 after installing NI-Motion 7.0

Hi,
I updated my PCI-7344 + LabView 7.0 system with the newest NI-Motion 7.0. After the update the card was not anymore detected in MAX. There was a "broken" device PCI-7344 under NI Motion Devices, which status said something like "This device has been removed or could not be detected" and the Reset command said something like "Could not communicate with the device. Power cycle the computer..". I removed the device from the "Devices and interfaces" list and since that, MAX hasn't had a clue about the card. I've tried the "Create new.." function, but it doesn't show any NI Motion Devices or PCI-7344 anywhere else. I've also tried the Tools/Install legacy driver support, but MAX only notifies that the updates are OK. I've also tried removing the physical device, starting the computer and MAX, reinstalling the device and restarting MAX, but nothing changes. The device is recognised by BIOS as "Unknown device"; in Windows 2000 Pro, the device is well recognised as National Instruments PCI-7344.
One thing that could cause the problem is that I also have LabView 6i installed on the system, although I'm not currently using it for any purpose. Anyway, this seems to prevent the MAX from detecting the correct updates needed when using the "National Instruments Product Updates.." from Tools menu. Perhaps I need some driver software to correct this problem?
I also tried to uninstall the NI-Motion 7.0 and to install the NI-Motion 6.1.5, but after this, the MAX did not work correctly. For example, none of the branches in the configuration tree would expand and the MAX locked up when trying to use the Create New.. / NI Motion Device. Is there a way to uninstall the NI-Motion 7.0 and to replace it with NI-Motion 6.1.5 without removing all NI software from the system?
Before the update, with NI-Motion 6.1.5, the PCI-7344 card was correctly found in MAX and well usable in LabView 7.0.

Jouni,
A valid serial number is any number > 0. If you have multiple boards in you system, they must each have a unique serial number. This would be the case for any board coming out of manufacturing. The board Jochen had probably came from R&D and was a prototype board.
Your problem with downgrading from NI-Motion 7.0 to NI-Motion 6.1.5 was most likely due to the data stored in the MAX database. When you uninstall NI-Motion, the data in the MAX database remains. The NI-Motion 6.1.5 driver would not have been able to read the data correctly. The easiest way to "clear" this database is to delete the c:\Program Files\National Instruments\MAX\data folder. The only other way is to uninstall MAX, which requires that you uninstall everything. WARNING, Deleting the MAX data folder will delete all MAX settings and set them back to defaults for all NI hardware (uninstalling everything has this same affect, by the way). Downgrading is never as clean as upgrading.
The firmware on a Motion board can always be downgraded by forcing the download of firmware files. To do this, select the board in MAX under Devices and Interfaces. Click on the Firmware tab at the bottom on the window. Highlight "PCI-73XX Firmware" by clicking on it once. Right click on one of the items in the "Firmware name" column to the right. Select "Download All Files".
I do not have a good explaination for why NI-Motion 7.0 did not recognize your board. Do you have a second board you can try in the system? If not, could you ask your local sales representative if they have one you borrow for a quick test? Since the board is recognized by Windows 2000 Device Manager, I don't think there is an issue with the board, but it doesn't hurt verify this.
My best guess is that there was a confict during the installation process and your system did not get all of the required files. Though we do significant installer testing, there are rare occasions when a system is in such a state that the installation process does not function as expected. It is my experience that these rare instances do not occur on clean machines, but on machines that have had multiple products installed and uninstalled. If you do get a chance to try NI-Motion 7.0 again you may want to use these parameters to get the installer to create a log of the installation: "c:\setup.exe l*v c:\log.txt". This assumes that the setup.exe is in the c:\ directory. Go to start>>run and type this in without the quotes. The log file will be named log.txt in the c:\ directory.
Finally, you can technically use NI-Motion 7.0 in LabVIEW 6. You just need to copy the C:\Program Files\National Instruments\LabVIEW 7.0\vi.lib\Motion folder to the vi.lib folder of LabVIEW 6. Though this is not officially supported, there is no reason it shouldn't work.
Regards,

Can't find the download link for CS6 Production Premium after uninstalling PS CS6 Beta...

I downloaded and installed CS6 Production Premium. Then I realized I had to uninstall PS6 Beta. But after uninstalling PS6 Beta I wasn't able to reinstall PS6. I went back into My Adobe and although I see CS6 and the serial number listed under purchased products, nothing comes up when I click on recent orders or order history. I can't find a link to redownload the product.
Thanks!
Raoul

If you have already downloaded the CS6 Production PRemium then you can use the same to install , no need to re-download
and If you don't have the downloaded setup then you can download the software as trial and serialize it later but do make the back up for future use.
To have the download links under Adobe,com account, you have to contact Support no one can help you here.

After installing LV 7, MAX 3, NIDAQ 7, can not target to LV 6.1 RT even after uninstalling and loading older version.

We have started using LV 7 for all of our new projects but still have to support a number of older projects made in LV 6.1. After installing LV 7, MAX 3 and NIDAQ 7, we can not do remote DAQ configuration on the older version of RT and can not target to the RT system either. We used NIs uninstall for MAX and NIDAQ and then reinstalled the older versions, but we still can not remote DAQ configuration. Computers that have the older versions of MAX and NIDAQ and have never had the newer versions installed have no problem with remote DAQ configuration or targeting.
How can we go back to the previous version of MAX and NIDAQ and get it to work? What is left
after uninstalling the newer versions?

Rob,
I would recommend creating a Service Request on-line and contacting an Application Engineer. There are several possible reasons that software might not be completely removed, and we have some utilities that will make sure this does not happen. There also might be some issues with downloading the code to the "target". We could quickly reformat the controller and make sure to get the older software on the system.
Regards,
Robert Jackson
Application Engineer
National Instruments

When reverting to purchased Adobe Acrobat XI Pro point product, after uninstalling Creative Cloud Desktop (and CC-based Acrobat XI Pro), how do I eliminate request to renew my subscription?

Creative Cloud just wasn't working for me, so after several years of frustration with being abroad and not online when the program decided to require online verification, I'm ditching Creative Cloud and reverting to the purchased Adobe Acrobat XI Pro point product. However, after uninstalling Creative Cloud Desktop (and CC-based Acrobat XI Pro), it still wants to go online and check my CC subscription, disallowing use of the newly installed point product version from a several year-old ESD file (and the more recent AcrobatUpd11010.dmg file).
Anyone have an idea of how to eliminate request to renew my subscription?
If, as a journalist, I've have these issues over the past two years, including this final insult when I'm trying to get away from CC, it can't be a one-off problem. So I'd like to hear details about others who've had a similar issue with reverting from CC back to a point product or to CS.
Thanks,
Tim

Hi Tim ,
Please refer to the following link to cancel your subscription of Creative Cloud .
https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
You can get in touch with Adobe Chat Support if that does not help and to get your queries resolved.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Regards
Sukrit Dhingra

I still get plug in failure even after uninstall and reinstalled adobe flash to my mac os x 10.7.5 (4 bit) with flash 16.0.0.235 how do I get this fixed??? HELP

I still get plug in failure even after uninstall and reinstalled adobe flash to my mac os x 10.7.5 (4 bit) with flash 16.0.0.235 how do I get this fixed??? HELP

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

How do i get my old firefox bookmarks back after uninstalling firefox

how do i get my old firefox bookmarks back after uninstalling firefox and then reinstalling it from scratch. I did a system restore, but i only retrieved my old tabs, no book marks :(

Hello,
see this
* https://support.mozilla.org/en-US/kb/recover-lost-or-missing-bookmarks?
* https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

Adobe reader shows a horizontal empty window in OSX 10.9.3 after uninstalling Acrobat 8. How to get rid of it?

Adobe reader shows a horizontal empty window in OSX 10.9.3 after uninstalling Acrobat 8. How to get rid of it?

Macintosh HD > Library > Internet Plug-ins
Look for these two files.
AdobePDFViewerNPAPI.plugin
AdobePDFViewer.plugin
Right click on those and select “Move To Trash”.
Restart the computer.

How can I reload photoshop cc after uninstalling because of crash

how can I reload photoshop cc after uninstalling because it kept crashing and wouldn't stay on the desktop

You've been very terse. Won't it just reinstall?
If not, Adobe makes a cleaner tool that does a more thorough job than the installer...
http://www.adobe.com/support/contact/cscleanertool.html
-Noel

How do I re-install indesign cc after I uninstall it?

how do I re-install indesign cc after I uninstall it?

Urabnkarma did you try removing the OPM.db file per solution 2 in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

After uninstalling adobe air on my Maveriks machine, how do I make adobe air stop trying to install itself generating error messages?

After uninstalling adobe air on my Maveriks machine, how do I make adobe air stop trying to install itself generating error messages? Sadly, support isn't happy to help and insists on posting here. Can anyone help?

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/

How to uninstall MAX (Ver 2.0) after uninstall Labview 6.0

Similar Messages

Maybe you are looking for