How to uninstall NMH410 media hub software?

I pulled this media storage device out of storage room and hooked it up to our Ethernet switch, hoping to save and share photos in our home.
It is no longer supported now, and very complex to set up. Very little support materials to find. I decided to get rid of it, unplugged from our switch, put away. Pop-up NIGHTMARE now, getting pop up every 30 seconds that reads:
"There was a problem connecting to the server "CiscoMediaHub". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
The pop-up error happened 10 times while typing this. HELP!
To uninstall software on Mac, think just put in trash. I have a MacBook Pro. What are the software names so I can trash this?

I agree. This device is really hard to deal with. I managed to backup my friend's files before by using TeraCopy and uninstalled Linksys Media Importer Tool. I used TeraCopy due to frequent disconnection from the hub if ever I'll be using the built-in copy dialog of Windows.
Anyways, I was able to find some article that tackles with connectivity issues. No direct answer though. I wish this device can be accessed via SSH or telnet so that it will be easier to move around.
Somewhat a very expensive, half-baked NAS. NAS200 is even better than this. Good thing it ended it's life now.
If everyone needs to believe in something, I believe I'll have another beer..

Similar Messages

HT201210 how to uninstall the unauthorized modification software?

how to uninstall the unauthorized modification software?

Can't really help you - what did you install in the first place?
Also, there is not really a lot anyone can do to help you if it was unauthorised in the first place.

How to Reinstall Creative Media Player Software

October 2nd 2006
If your update for Creative Media Source, Creative Media Player, and any associated programming has corrupted your system and you need to reinstall the older version or reinstall any of it period this information is critical to avoid serious frustration. It took me four days to figure this out fully and it was HARD to figure out with NO thanks to Creative Technical support. If anything Creative OWES me for this information since they are too stupid to answer my questions with anything but canned answers. It was posts on the Creative forum and several searches in Yahoo and Google that helped lead me to the conclusion of this issue and I feel that you as a Creative customer are not going to like this at all but hey, I?m just the messenger so please don?t kill me! Word of warning! Formatting your hard dri've and reinstalling all your software is far easier than what I am about to instruct you but what I figured out does work and seems to be the ONLY way of really fixing this bug. This applies to the Audigy Z 2S Platinum and should apply to ALL Creative Software in this line of Creative Products.
What caused this in the first place:
I was happily running the supplied creative Media Player, Media Source Go! software with THX, Dolby, and the other features that came with my Audigy Z 2S Platinum. As a conscientious computer user I like to keep things up to date and like to keep my software updated so I went to the Creative site and performed the automatic updates. BIG, BIG mistake! I lost the Equalizer, THX, the Mixer, and everything BUT the most basic of applications to this sound card. The point of me buying it in the first place was the features. The updates stripped me of them. When I tried to reinstall the original software the problems began. When using the supplied installation disk and attempting to uninstall the software was problem one. Creative never had the forethought of supplying an accurate uninstallation feature so when you use the ?Add/ Remove Program? feature you do not get the junk that Creative hides in your file system much like trying to extract AOL Files (which gave me the inspiration for getting rid of the corrupted installation of Creative Software). Like AOL software Creative is extremely invasi've and hides in a number of places you would not even think to look in.
The Issues you will be facing and the associated Error messages:
Upon reinstallation of the old software after my first of many attempts at removing the old installation I began to get the following error messages upon startup of the Media Source software, ?Exception-Created Object:Exceptions:FactoryNotFound Message:?Invalid Factory in Created Object: AudioChannelMappingMSG? and ?PFX file missing or corrupted, application will now terminate?, and the last of your nightmare messages ?Device not found by application and application will now terminate?. If you get any of these messages you are screwed and face a serious uninstallation procedure to correct this. Thanks to this you should be able to fix it all and get your reinstallation to take properly.
Something to keep in mind and I only found out about this the day before I wrote this, Apple Quicktime 7 has a serious conflict issue with DemoShield and the removal process is the same for the Creative Software since uninstallation will not get Quicktime out either. Before you reinstall remove Quicktime 7 or you are going NOWHERE! Quicktime 6 does not appear to interfere with the installation. You will get the error message ?DemoShield has encountered a problem and needs to shut down? followed by the computer wanting to send an error report. This is a sure fire sign that Quicktime is interfering with the installation along with the file DEMO32.exe which will need to be deleted.
Another thing I need to mention is that you WILL need the following software or something similar to eliminate all traces of Creative software, Error Expert, RegEditXP, Directory Cleaner, and Find Dead Links. This software will get the impossible and hidden stuff you will not find or be able to get rid of otherwise.
Preparation for this task:
Kick on some music, smoke a FAT joint, drink a beer, or do both because this process is involved and frustrating! If you don?t drink or smoke or both than I hope God is with you because you will be cursing and swearing when something does not go right. Remember, I was at this for four days FULL TIME with minimal information to go on. Patience is a MUST or be ready to pay an expert a LOT of money to deal with this.
Now it begins:
NOTE: It should not be necessary to uninstall the Card itself. The software and not the PCI card is the issue and the drivers are not what cause the hanging reinstallation. I did at one time in the process of figuring this crap out pull the card but when I managed to fix the problem I had left the card in. Again it is NOT necessary to pull the Sound Blaster card from it'ss slot to effect the fix for the software.
NOTE: Should at any time in this extraction process you get the message ?Application cannot be removed? or ?Another application is using file and it cannot be removed? hit CONTROL/ALT/DELETE to open the Task Manager. Click APPLICATIONS and if Creative software is running click END TASK. You can then continue the extraction process.
: TRY to save all of your important media files in another directory (preferably in another dri've or partition. Another dri've is preferred) before you begin this so you don?t loose your music and video files to an accident, misunderstanding, or software association. Making a special holding folder with an easily recognizable name not having Creative in its name will help keep you from accidentally deleting these files in the event the search turns them up.
2: Go to the ?Add Remove Programs? in the control panel and remove all instances of Creative you can find. When that is done go to Run\msconfig and select ?Selecti've Starup? and UNCHECK ?Load Startup Items?.
3: Restart the computer. Now the fun begins. Put on your hunting hat, you are on digital safari!
4: When the computer starts up you will be notified by msconfig that changes have been made to the way the computer starts. Hit the red X and close the message and do the same for msconfig. You will see the prompt ?restart computer? or ?close without restarting?, select ?close without restarting?.
5: Open Windows Explorer, Start\Programs\Accessories\ Windows Explorer. The search feature here is a great help but for the moment get the obvious crap first.
6: In Windows Explorer click ?View? and select ?Show hidden files? in the selection menu window. This will allow you to get the stuff that regular uninstallation can't get at nor will a regular search reveal. THIS IS A VERY IMPORTANT STEP DO NOT TRY TO WORK AROUND IT OTHERWISE YOU WILL FAIL EXTRACTING ALL THE JUNK!!!!!
7: Look for these three directories first:
C:\Documentsandsettings\USERNAME\StartMenu\Program s\Creative
C:\Documentsandsettings\Aministrator\StartMenu\Pro grams\Creative
C:\Documentsandsettings\USRNAME\Applications\Creat ive
Delete them!
8: Now go to the C:\Programs\Windows directory. This gets touchy. WORD OF WARNING TO NOVICE AND INTERMEDIATE COMPUTER USERS ALIKE (Experts should need no warning about this) BE VERY CAREFUL ABOUT WHAT YOU DELETE HERE! THERE ARE FILES HERE CRITICAL TO THE OPERATION OF ALL OTHER APLICATIONS ESPECIALLY WINDOWS AND DELETING THE WRONG ONE WILL RESULT IN A COMPUTER THAT WILL NOT START! You can confirm who made the file by pointing at the file in question with your cursor and it should display the maker of the file.
You will be hunting any and all programs with the following beginnings, CT, SB, ct. The files beginning with ?ct? can either be Creative or Microsoft, CONFIRM EACH BEFORE YOU DELETE THEM.
The Windows files you will be looking in are:
C:\Programs\Windows\ime
C:\Programs\Windows\inf
C:\Programs\Windows\PIF
C:\Programs\Windows\prefetch
C:\Programs\Windows\Registration
C:\Programs\Windows\System
C:\Programs\Windows\System32
Lower down in the Explorer window you will find the following files that also need to be deleted:
C:\Programs\Windows\CTCCW.DLL
C:\Programs\Windows\CTDCRES.DLL
C:\Programs\Windows\CTDV0K.CDF
C:\Programs\Windows\CTDV0K2.CDF
C:\Programs\Windows\CTDVAUDY.CDF
C:\Programs\Windows\CTHELPER.EXE
C:\Programs\Windows\CTRegrun.exe
C:\Programs\Windows\CTRES.DLL
That gets the obvious and less obvious stuff out but the hunt is not over by a long shot.
9: This is where it begins to get complicated. In Windows Explorer you will be using the Search button.
Click Search and look for these files:
HKLM\Software\Creative Tech\Software Installed !!DELETE THIS FILE!!
Demo32.exe !!DELETE THIS FILE!!
Creative
SoundBlaster
{5CDDF96A-BC34-4D72-9ABA-EFFF0C39977} !!DELETE THIS FILE!!
AC3 !!Delete any and all files found associated with Creative. With the AC3 files MAKE SURE they are Creative file before deleting them. There are AC3 files unassociated with Creative and they will appear in your search. ATI uses AC3 decoders as well and you DON?T want to screw up an application that is not the problem.!!
THIS COMPLETES AS MUCH OF THE MANUAL EXTRACTION YOU CAN AS A USER GET TO WITHOUT THE ASSISTANCE OF SOFTWARE.
0: Run Directory Cleaner and set it for Creative Audio and click CLEAN followed by setting it for Creative Audio Light and again Click CLEAN. Shut down Dri've Cleaner when you are done with this step.
: Run RegEditXP and fix all issues it finds and close it when it is done.
2: Open Error Expert and set it to Scan for Registry Errors. This gets the stuff RegEditXP misses. When it has found the problems it can select FIX.
3: While still in Error Expert select ADVANCED SYSTEM TOOLS and select STARTUP LIST MANAGER. Remove Creative from the list in any form you find it. Close Error Expert when done.
THIS COMPLETES THE REMOVEAL PROCESS FOR CLEARING YOUR COMPUTER OF CREATIVE SOFTWARE.
IF YOU HAVE QUICKTIME 7 IT HAS TO BE REMOVED DUE TO A COMFLICT WITH CREATIVE INSTALLATION SOFTWARE!
If you do not have Quicktime 7 then open msconfig, reset your computer to ?Normal Startup?, click ?Apply?, then close msconfig and restart. You can now reinstall your original software.
4: Removing Quicktime 7:
This sucks as well. Uninstalling Quicktime 7 from the ?Add/remove Programs? will not work. First make sure it is OFF. If it is acti've it will not be removable. Check with the task manager and in your system tray at the bottom right hand corner of your computer monitor. If you see the blue ?Q?, close it before beginning the extraction process or it will get very complicated.
Windows Explorer Search found all the files I needed to remove but like Creative reference all the same folders in C:\Programs\Windows as you did for removing the Creative Software and remove all references of Quicktime you find;
C:\Programs\Windows\ime
C:\Programs\Windows\inf
C:\Programs\Windows\PIF
C:\Programs\Windows\prefetch
C:\Programs\Windows\Registration
C:\Programs\Windows\System
C:\Programs\Windows\System32
Windows Explorer will lead you to other programs it hides in and the one file I could not remove under any and all circumstances was the one in C:\Programs\Adobe. That one reference will not interfere with anything so you can leave that one. Once you have removed Quicktime 7 go to msconfig and select ?Normal Startup? and restart your computer.
After your computer boots up fully slap the CD ROM in the dri've and it should begin to start up as if it was never installed in the first place. You will get the prompt to, ?Modify, Repair, or Uninstall? software. Uninstall is a joke since it does not work and it is unnecessary. There should be nothing to repair after all of this so I chose Modify. I now have the original software that worked right when I first got the Audigy Z 2S sound Card and it works fine. As a footnote to all of this I did get one error message when I restarted after the installation. It said ?cdrw32.dll missing? but it had no apparent effect on my computer. A subsequent reboot and the message never reappeared. I am not looking this any deeper than I have to since the message never reappeared and I suspect it had something to do with the reinstallation process of Creative Media Source and the media player.
The End!

Audio Console is included in the latest drivers, the easiest way to reinstall it is to reinstall the drivers but if you want to reinstall only the app, uncompress the drivers package with WinRAR and run the setup program from the AudCon Folder. If your X-Fi is OEM you may need to mod CL's drivers, or get a package from Dell that includes AudioConsole.

How to uninstall Route 66 navigation software from...

I am looking to update my sat nav application, but I looks like I need to uninstall the version that I currently have on the phone. I looks like it's installed on the phone memory and not on the memory card because when I remove the card, the sat nav still works.
I've looked everywhere and tried everything, but so far I haven't been able to figure out how to uninstall this appication. Any idea?
Thanks for any suggestions.

Hi mike6221
Apart from loss of data issue, a hard reset by keying in *#7370# followed by 12345 (default Nokia lock code) returning device to "out of the box condition" should do the job as N95 does not have User Data Preservation feature and all user installed applications will be deleted.
Happy to have helped forum in a small way with a Support Ratio = 37.0

How to uninstall Creative NX Ultra Software completely?

I uninstalled the driver and all other entries of Creative under Control Panel/Software.
But:
The product registration remains on my computer, the folders and files under program files/creative are also not deleted and the creative entry in All Users\Start Menu\Creative.
How to remove this software too?
Thank you.

If you have a copy of the CD around, I'd sure appreciate it being uploaded to a site so I can install my camera.

HT2357 how to uninstall an update from software updates

i saw a button that says update software, so i clicked yes, no this firmware software updated, then i removed it, but my safari still looks differet, i dont have the quick google search bar and my computer is slow.

What Mac do you have?
What version of OS X are you running?
What update did you install?

Am I getting Gigabit transfer between WRT610N router and NMH410 Media Hub?

Shouldn't the ethernet port LED be flashing blue (gigabit connection) between these 2 connected devices? It's flashing green which, according to the router manual, suggests a 10/100 port. I'm sure I'm missing something!

If you are refering to the Manual of WRT610N about the Light status, You need to reverse the light status. As per the Linksys manual The LED lights up Green when it is connected to 10/100 port and Blue when it is connected to a gigabit port. But in real terms which you need to revers this, Green light for Gigabit and Blue light for 10/100 port.

I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and other things I might install on my computer. With a PC it's really easy, you just go to the control panel.

I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and anything else I may install on my computer. With PC it's very easy, you go the control panel, locate what you want to uninstall and with a few clicks it's done. Can someone please help me? Thank you.

See these:
Switching from Windows to Mac OS X,
Mac Basics—Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Apple How-To Guides for Mac OS X,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mavericks Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how d

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how do I fix it?

You can't fix it. iTunes bought content is DRM protected. so it can only be played on authorized devices. i.e devices associated with the apple Id used to purchase the content. Its copyright protection that the rights owners demand.
Circumventing it, is illegal in most countries, and as such cannot be discussed here. If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv.

How can I uninstall adobe media encoder cc at macbook (Mavericks)?

How do I uninstall adobe media encoder cc on macbook (Mavericks)? I have installed two versions (AME AME CC and CC 2014), AME CC 2014 has unistall file, but the application AME CC has unistall file or i can not find it. The situation is similar in the application ADOBE EDGE CODE CC and ADOBE EDGE CC Reflow CC.

Because I have installed two versions, CC and CC (2014) I have a small ssd drive, I want to uninstall unnecessary applications and replace them with new ones from the 2014 edition. I have a problem with applications: Media encoder CC, EDGE CODE CC, Rreflow CC, Lightroom 5, these applications just do not have the files "uninstall". CC Photoshop, Illustrator CC, InDesign CC, Media Encoder CC (2014) - with these applications I do not have a problem, I can uninstall these applications because have files "uninstall".

Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)

Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)

Also some problems since the CC2014... For me i can launch bridge but the crash occurs when i try to change access to any bridge preference... i open a discussion about it

After downloading latest Reader software (11) on my Mac (OS10.7.5) I cannot print pdf files on either of my two printers. How do I uninstall and reinstall the software? Adobe's instructions are only for Window devices.

After downloading latest Reader software (11) on my Mac (OS10.7.5) I cannot print pdf files on either of my two printers. I suspect corrupt software. How do I uninstall and reinstall the software? Adobe's on-line instructions are only for Window devices.

You can just drag the file to the trash. If you want you can remove the pdf plug-in from the internet-plug in folder, but that should not be necessary to correct your problem.

How to uninstall a software in mac os x 10.8

how to uninstall a software in mac os x 10.8

Welcome to the Apple Support Communities
In Mac OS X, it's easy to uninstall apps. Most of the apps can be uninstalled just dragging them to the Trash. However, some apps come with an uninstaller, and in this case, you have to use the uninstaller. That's because some apps have got files in other folders, and if you just drag the app to the Trash, these files will stay there and they will take space

How do I uninstall debut video capture software from my macbook pro?

How do I uninstall Debut video capture software from my macbook pro?

Thanks Sig - not sure that the program came with an uninstall feature (seemed to just go straight into the apps folder but I'll give it a try.

When will there be a software update for the Media Hub?

1. Many issues related to playing media types - Need updated or increased CODEC's - Flash, MPG, Divix, WMP should ALL play. Why don't you put ALL the CODEC's in????
2. Support for iTunes playlists. This should be a basic funtion.
3. Funtion to get rid of duplicates as common sense tells you that he Media Hub will see your iTunes LIbrary and the built in function of "Import" creates duplicates.
4. Support for better identification of iTunes related Album artwork. It's there! Wht does the Media Hub not see it as iTunes does?
5. Larger buffer options to cut back on load times for large libraies of photo files. Don't mind giving up some disk space for this too or using an external mem card!
6. Better Sony Play Station support as SP3 sees files as not compatible, yet plays them and not others.
7. When can we expect some form of software update?
8. Does the Media Hub (405) run faster with a single drive if you turn off the two drive option?

1. You have to understand that it would be close to impossible to place all the codecs in one device. As some codecs requires DRM.
2. I'm not sure what codec you are after in itunes since M3U is supported by the media hub. Supported File Types for the Built-In Media Player in the NMH
3. I strongly agree with you in this one. Duplicate files using the Import Tool should be automatically be removed. That's why I don't use the Import Tool anymore instead I just use the NTI Shadow when transferring files automatically to the hub.
4. The media hub uses AMG Server to look for album artworks. But the last upgrade of the firmware allows you to use your album arts without the interference of the AMG Server but the art must be tagged on the media file.
5. I agree with you on this one as well.
6. I always keep in mind that not all devices works as what we expect it to be. So better just bear with the Play Station support until we get some updates.
7. Only LinksysbyCisco can answer that. LoL
8. The media hub functions the same way regardless whether you are running on 2 drives or 1. But of course, there will be some minor differences on Read and Write performance when running on RAID 1 since both the drives will have to read and write the same files into it making the processor double its work.

How to uninstall NMH410 media hub software?

Similar Messages

Maybe you are looking for