How to uninstalled application in MacBook Pro 13 inch Late 2011

How to remove or uninstalled completely application in MacBook Pro?

If all you did to install an application was drag it to the Applications folder, it will be completely uninstalled by dragging it to the Trash and emptying the Trash. How many other files that you've trashed and emptied can you still find on your computer?
Why bother to ask questions if you aren't going to believe the answers you're given? That's just a waste of your time and the time of anyone who answers you.

Similar Messages

  • I have a macbook pro 13' (late 2011) 2.8Ghz Intel i7 memory 4GB 1333 MHz DDR3 and have upgraded my OS X Lion to Mavericks. Everything has slowed down. How do I go back to the older OS X Lion? Or should I improve speed differently?

    I have a macbook pro 13’ (late 2011) 2.8Ghz Intel i7 memory 4GB 1333 MHz DDR3 and have upgraded my OS X Lion to Mavericks 10.9.5. Everything has slowed down and the battery lasts a bit earlier. How do I go back to the older OS X Lion? Or should I improve speed differently? Would improving memory to 8GB help?

    i have run the EntreCheck and here is the report:
    EtreCheck version: 1.9.15 (52)
    Report generated 28 September 2014 16:16:39 GMT+3
    Hardware Information: ?
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.8 GHz Intel Core i7 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.5 (13F34) - Uptime: 0 days 4:59:22
    Disk Information: ?
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 749.3 GB (203.96 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-8A8 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Vodafone (ZTE) Vodafone Mobile Broadband K3565-Z
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.ZTE.driver.ModemDriverMac (1.0.2d1) Support
      [loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.1) Support
      [not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.1) Support
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      [not loaded] com.roxio.TDIXController (2.0) Support
    Startup Items: ?
      HWNetMgr: Path: /Library/StartupItems/HWNetMgr
      HWPortDetect: Path: /Library/StartupItems/HWPortDetect
      StartOuc: Path: /Library/StartupItems/StartOuc
    Launch Daemons: ?
      [running] cn.com.zte.PPPMonitor.plist Support
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] PPPMonitord.plist Support
    Launch Agents: ?
      [running] cn.com.zte.usbswapper.plist Support
      [running] com.hp.devicemonitor.plist Support
      [loaded] com.hp.messagecenter.launcher.plist Support
      [running] Swapper.plist Support
    User Login Items: ?
      iTunesHelper
      Dropbox
    Internet Plug-ins: ?
      SharePointBrowserPlugin: Version: 14.0.0 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 537 - SDK 10.9
    Safari Extensions: ?
      AdBlock-2
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      MacFUSE  Support
      Tuxera NTFS  Support
    Time Machine: ?
      Time Machine not configured!
    Top Processes by CPU: ?
          5% Safari
          3% WindowServer
          2% BitTorrent
          2% hidd
          0% softwareupdated
    Top Processes by Memory: ?
      229 MB Safari
      160 MB softwareupdated
      156 MB com.apple.WebKit.WebContent
      135 MB com.apple.IconServicesAgent
      102 MB VLC
    Virtual Memory Information: ?
      45 MB Free RAM
      1.55 GB Active RAM
      1.52 GB Inactive RAM
      895 MB Wired RAM
      628 MB Page-ins
      0 B Page-outs

  • Macbook Pro 13" Late 2011 hard drive fails, how to replace hard drive?

    Hi!
    I have a Macbook Pro 13" Late 2011 (OS X Mountain Lion v 1.3.18 (352.4). I tried to install OS X Mavericks but it showed this error message:
    "This disk has S.M.A.R.T. errors. This disk has a hardware problem that can't be repaired. Back up as soon much data as possible and replace the disk."
    The laptop was still doing fine so I didn't do anything. Then it started to act funny: iPhoto stopped working, hangs when I watch video streaming, and it started to run really slow. I only use the laptop's basic features- internet, watching movies, editing using iMovies so it's really strange for me that the hard drive failed all of a sudden.
    I called Apple support and a kind fellow tried to troubleshoot it, thinking it was only a software problem. In the end, he said I need to bring my macbook to the service center and have the hard drive replaced. I know it will cost a lot so I want to replace the it myself.
    Here are my questions:
    1) Can this problem really be solved by just replacing the hard drive?
    2) Can I use SSD this time so my Macbook can run faster?
    3) What SSD is recommended for my late 2011 Macbook 13"?
    4) I don't have the installation disk, can I still install the OS X Mountain Lion? How?
    I am looking for other sites as well but I hope this community could share some tips too.
    Thanks a lot!

    I've switched out the hard drive on my Late 2011 model several times and I've never disconnected the battery cable.
    In my "Opinion" it is not necessary to do that. Not sure if it is or not recommended by Apple.
    EDIT:
    I just looked at my User Manual, PDF I downloaded from Apple, and there is no mention of disconnecting the battery.
    Here's a link to the manual for my model.
    http://manuals.info.apple.com/MANUALS/1000/MA1602/en_US/macbook_pro_15inch_late_ 2011.pdf

  • Macbook Pro inch 13 (2011) graphic problem

    Please Help me I dont stand why if I buy a MacBook Pro inch 13 (2011) the game "The Sims 3 Pets" have graphics problems, the horses look black and without form. Whith de previous Macbook pro inch 13 with nvidia graphics the game is perfect and now with the most modern the game dont also work. I dont know the problem is Lion SO
    Thanks
    Alejandro

    Apparantly there were some compatibility issues with the Sims3 and Lion. I believe there is a Sims3 update available if I'm not mistaken.

  • How long to boot MacBook pro 13" late 2011?

    It takes 1 minute 30 seconds to startup my macbook pro 13" late 2011 (2.4ghz i5 processor, 4GB RAM)
    This seems like a long time? I have Microsoft Office and Photoshop installed, will this slow it down?
    Thanks!

    if you have a normal hard drive installed - it usually takes a minute to desktop when you power up.
    check your login items to see what's loading when you first power up your Macbook.
    you can also go to disk utility and verify your disk permissions - repair them if errors are found then restart your Macbook. 
    see if that helps your booting time.
    good luck

  • 20" Apple Monitor - Thunderbolt - MacBook Pro 15" (late 2011)

    I have an Apple 20” monitor with an HDMI cable. I had that monitor connected to my Macbook Pro 15" (late 2011) with an HDMI to Mini adapter, and it was working fine as a second monitor.
    I purchased a Thunderbolt monitor to daisy-chain the Thunderbolt monitor to the Apple 20” monitor and end up with a 3 monitor system, but I cannot get it to work.
    This is the way I have them hooked up:
    20” Apple Monitor (HDMI Cable->Mini)  -> Thunderbolt -> MacBook Pro 15” (late 2011)
    The 20”Apple Monitor does not show any image even though it is on and working properly. The Thunderbolt and MacBook Pro displays show the images. How do I connect these?

    You could use a USB to DVI converter
    <http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/>
    but performance will be severly limited by USB and some functions won't work
    <http://www.displaylink.com/support/mac_downloads.php>
    "Please note: This driver does not support 3D acceleration. Some features of Mac OS X-based applications that require hardware OpenGL acceleration, such as Keynote presentations and iPhoto* slideshows, will not function properly."

  • Macbook Pro 15" Late 2011 - Running Extremely Slow

    I've only had my Macbook Pro for about 9 months. Lately it's been running EXTREMELY slow, and freezing up at some times. I have a RAM monitor, and it will sometimes drop below 192MB! I have 4GB installed, and I only run a few light-weight applications, No Final Cut, or Photosop. On a typical day I'll have the following open at once: Safari, Spotify, Minecraft, Mail, Messages
    Nothing 4GB can't handle right? I guess not. I don't download from untrusted websites, so I doubt it's a virus. I honestly have no clue. I don't have the Apple Care, and I'm not sure if this is covered in the 1yr limited warranty that is included with the computer. Hopefully someone can help me resolve this issue.
    Thanks,
    Caleb.

    cdh0127
    Re: Macbook Pro 15" Late 2011 - Running Extremely Slow 
    09-Mar-2013 23:49 (in response to pennbank)
    I know how computers work.
    Oh Sorry Thought you were asking for assistance in solving a problem with your computer

  • Macbook Pro 13" (Late 2011) - High Definition Audio Device - Code 10

    Hi, i installed Windows 7 Ultimate 64 Bit via Boot Camp on my new Macbook Pro 13" (Late 2011). Driver Disk was installed, but the "High Definition Audio Device" couldn't be started. Status is Code 10. Normal Cirrus Logic Audio is working. Any advice, how this could be fixed? Would be nice, to have audio over the Mini-Displayport HDMI Adapter on Windows as well (Works perfectly with Lion).
    Thanks,
    Thorsten

    Hi, i installed Windows 7 Ultimate 64 Bit via Boot Camp on my new Macbook Pro 13" (Late 2011). Driver Disk was installed, but the "High Definition Audio Device" couldn't be started. Status is Code 10. Normal Cirrus Logic Audio is working. Any advice, how this could be fixed? Would be nice, to have audio over the Mini-Displayport HDMI Adapter on Windows as well (Works perfectly with Lion).
    Thanks,
    Thorsten

  • Macbook pro 13 late 2011 turns on but no display and light

    Hi i have got macbook pro 13" late 2011 which turns on and i can hear the chime but there is no display and ligh in the screen its completely blank. Anyone had this problem and how did u solve this ?

    Have you tried booting into the Recovery HD and running Disk Utility and checking to see if the HD needs repairs?
    Restart holding Command + r and at the recovery screen select Disk Utility. Then select Macintosh HD and click  on 'repair disk'. If anything gets altered click on repair disk again until you get a clean pass. Restart as normal from the Apple menu. More info here about the Recovery HD:
    http://support.apple.com/kb/HT4718

  • MacBook Pro 13'' late 2011 battery health problem!!! HELP!!!

    I have a MacBook Pro 13'' late 2011.
    It's this normal? How do I increase my battery health?
    Can I change my battery?

    When did you buy it?
    Do you run it down to near zero % before recharging? Which is a bad thing to do.
    Do you charge it to 100% before you take it off the charger?
    Do you always disconnect the charger once it reaches 100% even if you are right next to an AC outlet. Which is a bad idea.
    Batteries only last so long. Over use it and it will go bad sooner.

  • Macbook Pro 15 "(late 2011) failure of the graph?

    I have a Macbook Pro 15 "late 2011. Anyway, yesterday suddenly working with photoshop choppy with many stripes screen mode interference stayed. Thing goes off and no longer gray top with window apple and can distinguish some weird lines in the background.'ve noticed that much heated and the fans spinning at maximum causing a lot of noise, but very exaggerated even going to burn and thought it is the graphics card. Des then ever Very few, I get to open the OS but asking him to do something that required a bit of thinking and resources are left hanging and computer exorbitantly warm after a while of being on, with fans the most.
    I report and I've seen these Google Apple Macbooks Pro have had problems with this model, which came with the faulty graphics card and there are many cases like mine the net.
    I've led the service and have told me it's the graphics card and ask me € 650 to change the motherboard and the graphics card is integrated into it.
    Because there are some times reaching to open the operating system and some not? If the graphics card failure should never be opened or seen anything on the screen ...
    Because if the graphics card fails the computer so hot? Something does not look clear or logical in this ...
    I was very happy with the laptop and Apple products even recommending their products worldwide.But now I feel ripped off by Apple, very unhappy and never'll buy an Apple product and will recommend to anyone else. I think if a laptop goes with any defective part must be arranged at no cost by the consumer no longer has warranty though. If your products are of such quality that do you find such a product to market and not requite the damage? I thought Apple products were of high quality and durability ...
    The question is how Apple leaves the market one produxto flaws and is not responsible?
    I would like a response from the company
    Actually, I'm very disappointed.

    noice T greetings:  Your comment suggests that you have had  less than satisfactory results in dealing with the staff at the Genius Bar.  I am disappointed to hear that.  I on the other hand have found them to be good to excellent for the most part (yes I do recall a less than satisfactory Genius).  I think ffmcollins' problem is better addressed at an Apple Store than at Best Buy.
    Ciao.

  • MacBook Pro 17" (Late 2011) Graphics Card

    Hello Community,
    I've researched this community, and found some relevant posts to the following question. However, the answers I found weren't completely satisfying. So, I'm posting my own on the subject to help me and others.
    I have the following:
    • MacBook Pro 17" (Late 2011, MacBookPro8,3) 2.5 ghz Quad Core i7/512 SSD/8 GB RAM
    • Graphics Card: AMD Radeon HD 6770M with 1 GB VRAM and Intel HD 3000 Graphics
    I know desktop models can be upgraded, but I can not afford the one I need at the moment. I am aware that many Apple laptop graphics cards can not be upgraded. Can this particular AMD Radeon graphics card be replaced and upgraded?
    If it can be replaced and upgraded, any suggestions on the best graphics card available? AMD has some nice upgrades.
    The card is nice, fast, and I'm not unhappy with it, but I run graphics and multimedia applications, and could benefit from the newer cards available.
    I appreciate your input community.
    Thanks,
    Greg

    About the only time you can upgrade a video card in a notebook is if that model notebook came with a better video card then what you ordered. At a later date if that better video card become available on the used market you could by one and replace the original as it was made to fit in the same model.
    But it is almost impossible to buy one from the original manufacturer. Especial during the current production run of that model.
    In your case the model you bought has the best video card available in the new line of MBPs. So there is no better card that would fit in your system. Whether the new models that will be coming out later this year will use a better video card and whether it would physical fit in your model is unknow.
    But all of what I wrote above doesn't really matter as with all Macbook Pros the video card and CPU is Soldered to the logic board and can not be replaced. If either fails the complete logic board needs to be replaced.
    The only things that can be easily replaced by the user in a Apple Macbook Pro is the RAM, hard drive and DVD drive.
    All other parts Apple does not sell to the general public.
    So your only option is if the newer models have a better video card is to sell your present system and buy the new model.

  • What is the max memory allowed on a macbook pro 15" (late 2011), and what speed is the max speed allowed?

    Hello,
    I own a Macbook Pro 15" (late 2011) and I would like to upgrade the memory. I want to go with two 8gb sticks but if the motherboard only supports 8gb then I will have to stick with 8gb. Also, the ram that I have in currently, which is the 4gb that came with the mac, is 1333 Mz. Would I be able to upgrade to 1600 Mz on this laptop?

    Max is 16 GBs. Do not attempt to use memory with specs that differ from those required by your hardware.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • MacBook Pro 15" Late 2011 Problems with iMac 27" Late 2009 TDM

    Hi,
    I just got problems with my iMac 27" Late 2009 (Mini-DisplayPort) and my MacBook Pro 15" Late 2011 (Thunderbolt).
    When I try to use my iMac as external monitor for my MacBook, there are massive glitches and graphical bugs on my second screen.
    I bought a MDP-to-MDP wire from Belkin which works perfect on other computers.
    I tried these things:
    - Disconnected MagSafe from MacBook + unplugged all USB devices + switched graphics to discrete.
    - Shut down all computers ... then booted MBP, iMac and triggered CMD+F2
    - SMC, PRAM reset on both devices
    The cable works, because:
    17" MacBook Pro Late 2011 works perfectly on my iMac screen with my Belkin wire!
    I connected my MacBook Pro 15" to a 27" Cinema Display and it works flawless.
    After that I plugged it out and tested it again with my iMac screen -> suddenly it works.
    Retriggering CMD+F2 or replugging breaks it again with massive bugs.
    The MacBook Pro 17" is on 10.7.2, 15" is on 10.7.3, but I also tried to trigger dual screen in 10.7.0 setup with the same issue.
    Maybe its a problem with the internal 6750M of my MacBook Pro 15"?
    The 6770M of the 17" is working well.
    Sample Video:
    http://www.youtube.com/watch?v=W_pgc52syes
    All updates/firmware updates of iMac and MacBook Pro are installed.
    Any solutions?
    Greets,
    Kai

    Since this is a user to user forum with no employees participation, your plea is a good a screaming into the wilderness.  I suggest that you post your thoughts here:
    https://www.apple.com/feedback/

  • I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

    I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

    I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
    I would suggest trying a different firewire cable.
    You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
    Here is a link.
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
    Other things to check:
    Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

Maybe you are looking for

  • Finder freezes when trying to move files to external hard drive

    Whenever I try to move files from internal hard drive to my external finder freezes it. I have over 5 TBs of free space on my external, so I know it's not a space issue. This happens no matter the size of the file. It starts the copy and then will fr

  • Alert is Firing multiple Times

    Hi, I designed an alert for one of my requirement, for this i build i a sql statement and my sql statement is returning 20 records and i check the same in Application, the records are matching and till now every thing works fine for me. When i start

  • How do I make a notification go away after I have read all the messages and it still says that I have an unread message?

    My messages app says I have an unread message from someone, but I have no unread messages. How do I make the notification go away?

  • How to turn ON Spotlight in Terminal?

    I recently upgraded my Dual 1.8 G5 to Tiger, and followed lots of advice to turn off Spotlight. I did this via the Terminal. well, ive decided that i want it back on, but i dont have the directions to turn it back on, only off via the Terminal. I am

  • Picking Output

    when the user creates delivery and Click on Extras - Picking output - it is showing error in the output processing analysis that " DElivery does not contains items to be picked" we dont have WM or Lean WM. thnx in advance