How to unistall the test pilot

I just updated my Firefox 3.6 to 4.0. I am unpleasantly surprised to see the TestPilot feature in the new version. I don't like my browser to gather and pass on ANY information about my online activities. On the top of that TestPilot pop-up messages cover significant part of the screen and they cannot be closed by clicking on the red "X" icon in the upper corner... the only way of getting rid of the bastard is to restart the browser.
In other words it sucks badly.
'''Is there any way of uninstalling the TestPilot? If not, I'm going to migrate from Firefox to other browser tonight.'''
Cheers

The sidebar shortcut is just a shortcut - right-click it and click Remove from Sidebar. Make sure, though, that the actual folder itself is deleted - it's probably directly inside your home folder.
Matt

Similar Messages

How to do the testing in Oracle SOA suite 11g

Hi,
Could any one plz provide the info abt " How to prepare the Test Suite(Test cases) in oracle soa 10g/11g ". Information provided that is been related to real time scenarios is much appreciated.
Thanks in advance,
Venu

Hi,
Check whether this doc:
http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/bp_testsuite.htm
and this blog can help you:
http://biemond.blogspot.com/2009/07/unit-test-your-composite-application.html
hth,
Peter Paul

After manual brs confuguration over how to strat the testing

Hi,
this is bramha from accenture.
my qustion is once configuration is over how to starrt the testing.
like to upload the beging balence and ending balence.

Hi,
Andrew Caldwell wrote:
Is there a way to invoke these without the script opening each one?
You must use the bundle identifier instead of the name
Here a example :
set theApps to {"com.microsoft.excel", "com.adobe.Acrobat.Pro", "com.barebones.textwrangler", "com.roxio.Toast", "com.fetchsoftworks.Fetch"}
repeat with anApp in theApps
       tell application "Finder" to tell (application file id anApp)
              set vers to version
              set parentFolder to name of its container
       end tell
       if parentFolder is in {"Applications", "Utilities"} then set parentFolder to ""
       display alert anApp & ": Version: " & vers & " " & parentFolder
end repeat

[svn:bz-trunk] 18814: Add manual test for BLZ-594 with instructions on how to run the test.

Revision: 18814
Revision: 18814
Author:   [email protected]
Date:     2010-11-24 09:31:56 -0800 (Wed, 24 Nov 2010)
Log Message:
Add manual test for BLZ-594 with instructions on how to run the test.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-594
Modified Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/remoting-config.mods.xml
Added Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/RpcTest.java
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/BLZ-594.mxml
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/readme.txt

You do have a very complex looking site and may need several tables in mysql to handle all that data. If you knew to phpmysql I would suggest taking a look at this tutorial it will help get you started in understanding how to $_GET info from a database and also how to $_POST data to a database. I am no expert just learning myself and I found this very helpful. This is the link http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
There are also many tutorials on Youtube to help build a CMS Content Management Site I would suggest the following: -
http://www.youtube.com/user/phpacademy
http://www.youtube.com/user/betterphp
http://www.youtube.com/user/flashbuilding
And many more on my channel here
http://www.youtube.com/user/Whisperingonthewind
CMS's are easier to maintain, add edit and delete content.
I have also recently bought a Book by David Powers Training from the Source very helpful.
Anyway hope you get it sorted.

ID: How to use the test Configuration tool

Hi all,
I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
I have given the input parameters what it has asked.
Header details:-
sender service,sender message interface and namespace.
payload:-
xml format( taken from message mapping)
log result:-
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
Please help me how to work with this tool.
Regards,
Deviprasad.

hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
i think it means...its trying to make a connection : HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
pls rectify me and convey me if u get the proper answer....or if i m wrong..
pls try to do use the test after login to IB through a user with maximum authorization....

The test pilot feedback button no longer shows up

After installing test pilot the feedback button was clearly visible and worked but only until i closed the web browser On March 2. When i opened Firefox on March 3 the feedback button for test pilot was no longer there. I checked to make sure test pilot was still installed and it is. I have tried closing Firefox and reopening it but it didn't work. Since I'm using the beta version I guess it could be a bug in the system. Here's hoping the problem gets fixed so i can continue to give feedback on Firefox 4.

basics from the manual are restart, reset, restore.

How to update the test case result in MTM using C#

Hi
I have tried the following code but when I execute the same I am getting the testcase result as "In Progress".
How to update the testcase execution result as Passed.
I tried the below code:
public
static
void UpdateResult()
TfsTeamProjectCollection tfs =
new
TfsTeamProjectCollection(TfsTeamProjectCollection.GetFullyQualifiedUriForName(server));
ITestManagementService tms = tfs.GetService<ITestManagementService>();
ITestManagementTeamProject proj = tms.GetTeamProject(project);
ITestPlan Plan = proj.TestPlans.Find(1);
ITestRun testRun = proj.TestRuns.Create();
testRun = Plan.CreateTestRun(false);
ITestPointCollection points = Plan.QueryTestPoints("SELECT
* FROM TestPoint");
foreach (ITestPoint
p in points)
testRun.AddTestPoint(p,Plan.Owner);// null);
testRun.State = TestRunState.Completed;
testRun.Save();
ITestCaseResultCollection results = testRun.QueryResults();
ITestIterationResult iterationResult;
foreach (ITestCaseResult
result in results)
iterationResult = result.CreateIteration(1);
foreach (ITestStep
testStep in result.GetTestCase().Actions)
ITestStepResult stepResult = iterationResult.CreateStepResult(testStep.Id);
stepResult.Outcome = TestOutcome.Passed;
iterationResult.Actions.Add(stepResult);
iterationResult.Outcome = TestOutcome.Passed;
result.Iterations.Add(iterationResult);
result.Save();
results.Save(true);
testRun.Save();
testRun.Refresh();

Hi Mohammed,
Sorry for my delay.
According to your code, I have been modified your code in my side and it can work fine. So you can refer the following code to check your issue in your side.
Reference:
publicstaticvoidUpdateResult()
TfsTeamProjectCollectiontfs
= newTfsTeamProjectCollection(TfsTeamProjectCollection.GetFullyQualifiedUriForName(server));
ITestManagementServicetms
= tfs.GetService<ITestManagementService>();
ITestManagementTeamProjectproj
= tms.GetTeamProject(project);
ITestPlanPlan = proj.TestPlans.Find(1);
IStaticTestSuitesuite
= Plan.RootSuite.SubSuites.Where(s
=> s.Id == 1339).First()
asIStaticTestSuite;
ITestCasetestcase
= null;
testcase
= suite.Entries.Where(e
=> e.Title == "login").First().TestCase;
ITestRuntestRun
= project.TestRuns.Create();
testRun
= Plan.CreateTestRun(false);
ITestPointCollectionpoints
= Plan.QueryTestPoints("SELECT * FROM TestPoint WHERE TestCaseId ="+
testcase.Id);
foreach(ITestPointp
inpoints)
testRun.AddTestPoint(p,
Plan.Owner);// null);
//testRun.AddTestPoint(p, null);
testRun.State =
TestRunState.Completed;
            testRun.Save();
ITestCaseResultCollectionresults
= testRun.QueryResults();
ITestIterationResultiterationResult;
foreach(ITestCaseResultresult
inresults)
                iterationResult = result.CreateIteration(1);
foreach(ITestSteptestStep
inresult.GetTestCase().Actions)
ITestStepResultstepResult
= iterationResult.CreateStepResult(testStep.Id);
                    stepResult.Outcome
= TestOutcome.Passed;
                    iterationResult.Actions.Add(stepResult);
               iterationResult.Outcome
= TestOutcome.Passed;
result.Iterations.Add(iterationResult);
result.Outcome
= TestOutcome.Passed;
result.State = TestResultState.Completed;
result.Save(true);
testRun.Save();
testRun.Refresh();
Note: you will need to
base on your requirement to modify the code such as modify the testsuite id and title in your side.
In addition, I find a blog about TFS API that can help you:
# Code snippets on Test Management APIs
http://blogs.msdn.com/b/aseemb/archive/2012/08/07/code-snippets-on-test-management-apis.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to change the Test UUTs UI?

I am having a bit of an issue with finding where to change the attached UI. I am trying to do something that I would perceive as easy, but I guess since I am a novice at using CVI, it makes this more difficult.
I believe that Test Stand is calling Modelsupport2.dll and I have tried finding in the source code what UI is being called, but I have not had any luck locating it. I may be going about this the wrong way and I get this funny feeling that I am just spinning my wheels.
Anyone have any links to some helpful information, or know where I can find this UI to change it's appearances? I have tried searching the forums here, but since I am not the most certain on the name I am searching for, it makes it difficult to find what I need.
Thanks.
Bill
John 3:16
Attachments:
My UI.doc ‏38 KB

Well my intention is not to look silly...but ya.
I should've been a bit more clear with where I am at. I have found the model data and the project files that I am interested in, modelsupport2.prj. I have toyed a bit with the "modelpanels.uir" file and the "paralleluutdlg.c". What I am looking to do is quite simple, I just want to increase the size of the SERIAL_NUM text box in the "modelpanels.uir" file. Do I need to physically change the size of the text in the .uir file and then recreate the modelsupport2.dll? I was searching through the "paralleluutdlg.c" to see if i could find an area where it sets the size of the serial number text box (I am assuming this is not the case, but I can't assume anything while trying to learn this) and didn't seem to find anything.
I am not much of a coder, being a EE myself, i have little to no experience with this stuff, so excuse my incompetence. Also if you would like me to post the .c files and all that feel free to ask and I will. I am also using test stand 3.5.
Thanks,
Bill
John 3:16

How can I prevent Firefox from re-installing test pilot?

I had removed the test pilot extension and its feedback button in Firefox 4.0b9. I let Firefox upgrade itself to 4.0b10 and didn't notice that silently re-installed it.
I was typing in another application when suddenly that window was minimized and the focus shifted to a Firefox "new test pilot study" window that popped up. Even if I had given permission for that software to be installed, that is rude.
I am not willing to trust that if I disable this logging software that it will stay disabled the next time I upgrade. I will remove test pilot again. '''How can I prevent Firefox from re-installing it?'''
One way might be to set extensions.rdf read-only. However, I do not wish to lose the ability to install add-ons, I merely do not want anybody (including Mozilla) to install an add-on without my permission.
https://bugzilla.mozilla.org/show_bug.cgi?id=519357 doesn't seem to address this problem as test pilot is a known component. Its not a plug-in so I can't modify the plugin scanning settings to prevent it from being loaded. Is there some way I can reliably supplement http://www.mozilla.com/en-US/blocklist/ with a local block list file? If so, would I have to update that whenever a new version of test Pilot is released?
http://support.mozilla.com/en-US/kb/Add-ons%20blocklist

I'm not sure what you mean by "re-directs e-mails." Are the recipient addresses changing between the time you address the message and the time it is sent?
If you could provide more information I think that would help in tracking this down.
When you use Firefox to work with your webmail site, whether Yahoo! or Gmail or another, the mechanics of sending the mail are handled by the site itself. So if there is a problem with how messages are addressed, then you may need to check your Yahoo! mail settings.

Why did TEST PILOT load to 3.6.15 rather than 4.0???

I just loaded the Test Pilot add-on. I don't remember which version of Firefox I was running when I loaded it. I use both because 4.o won't work on all sites without IETAB. I loaded on 3.6.15 and I'd like to load it to 4.o. How???

Are you using the same [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] with both versions?
An extension is always installed in the profile folder that is being used while installing that extension.
You should avoid using the same Firefox profile with different Firefox versions.
If you you that profile with both versions then create a new profile exclusively for the Firefox 4 version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Why can't I use the test circuit full time????

Just over two weeks with BT and I have to say without question the worst company I have ever dealt with. Utter utter useless at customer service and do nothing they promise, so I turn to the forum.
After a week on the phone to India finally get the phone and broadband working and then today I can't make out going calls. Incoming calls and Broadband still working.....for now.....
Anyway not feeling like spending another hour on hold have gone through the (so called) help online.
Can anyone explain how and why the test circuit on the junction box works fine but the 'main socket doesn't???
Further more why can't you just plug the phone into and keep it in the test circuit???
Also what would cause the line to suddenly stop working? nothing inside the house has changed???

Hi
The incoming line from the telephone exchange connects in the back of the main socket attached to he wall, when you plug the front plate in to the test socket it extends the line through to the socket on the front plate as well to some wiring connection ponts on that front plate.
If you have other sockets around the house they would either be plugged into the front plate or would be hardwired onto the rear of the front plate.
By unplugging the front plate all sockets in the house now become in active, can you confirm if there are wires connected at the rear of the front plate
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Problem about implementation of a controller in main_vi based on the test data of sub_vi

Hi Group:
I am developing a measurement and control system based on the PCI-6040E and SCXI1001,1102, and 1160.
But now, I have a question ,which is how to implement a controller in main_vi based on the test data of sub_vi.
my program is consist of main_vi and several sub_vi, the main_vi is used for controlling and give the operation signal to hardware system (relay). and sub_vi is used for sampling data.
for example: the sub_vi collects data from the hardware and the control algorithm and output is implemented in the main_vi, so the question is how to transfer the test data from the sub_vi to main_vi synchronously.
I try to set the output connecter, but the data just return when sub_vi is closed.
anybody have good idea about it.
Thanks a lot

Hi hanwei,
I'm making the assumption that you are not using LabVIEW Real-Time. If you are, you should use RT FIFOs. Otherwise, follow MikeS81's advice.
I would go a step further and say that most likely it would be a better design to remove the loop (while loop?) from the subVI and instead place the subVI within a while loop in your top-level VI. This way on each execution of your subVI it will quickly return your data. Then you can also perform all the queue and dequeue operations in the two seperate while loops in your top-level VI. This organization will be easier to read, document, and understand.
Mike Lyons
National Instruments
http://www.ni.com/devzone

How to schedule the eCATT objects ?

Hi,
I have developed the eCATT objects & incorporated in the Test Catalog.Right now
i would like to schedule the Test Catalog for collective execution,so i would really appreciate if anybody has any clues regarding how to schedule the Test Catalog (eCATT objects) ?
Warm Regards,
Ananth.

Hi,
I really didn't work on this. But i have one idea on how to do it.
There are some function modules for eCATT scripts. (try searching catty in SE37). Use those FMs in a ABAP program and just schedule the ABAP program as you want.
Hope this help.
Cheers,
Prasad Babu,
http://prasadbabu.blogspot.com

My Test pilot icon at the bottom of the window is gone! how do i get it back

An annoying message keept poping up, somthing with JavaScript so i went into safe mode and that fixed it. Then when a new test pilote study appeared it fist came out of the tools tool bar then it went to the right of the search bar in a distorted test pilot icon and when i clicked the x it dissapeared. along with the icon at the bottom of the page on the right of my McAfee Sitadviser thingy. Please help me find out how to get my little icon back. I might be able to give more details if that helps

Hi there @ketaminelover,
You may find the troubleshooting steps in the article below helpful.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
-Griff W.

How can i get also the files in the root directory and how can i for testing add items of IEnumerable FTPListDetail to List string ?

What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.

Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files.

How to unistall the test pilot

Similar Messages

Maybe you are looking for