How to unlock a Mac
Hi everybody,
My stolen Mac has just been returned after being succesfully located in the cloud. The Mac was also locked with the Find my iPhone app.
My problem is that I find no way to unlock it because it doesn't find the start-up disk (questionmark when powered up).
Any suggestions other than doing a total re-install?
Thanks, Jos
(questionmark when powered up).
Jos...
Try holding down the Option key while starting up. That should prompt the Startup Manger window where you can select the startup disk then click Restart.
Other than that since you have Lion installed use Lion Recovery (Command + R)
Similar Messages
-
After a reinstall of Mac OSX 10.6.8 on my iMac, several directories were "locked" and unavailable to me. Can someone tell me how to unlock my Downloads, Google Drive, Dropbox and movies?
Thanks for your help!Try to change the permission, take a look at this link, http://support.apple.com/kb/ht2963
Also this link, http://osxdaily.com/2011/02/21/change-file-permissions-mac/ -
How do I unlock mac? Someone hacked my account and I wiped my device from iCloud, and now I ask for a four digit code ignition Mac. How do they proceed in that way to unlock my Mac?
Settings>general>resets>erase all content and settings.
That will put it back to its out of the box state. Set it up with your own apple Id. -
I can't Install the Mac OS X Lion because of Disk Locked. How to Unlock the Disk? Anyone can Help Please
Right click the hard drive icon and select Get Info. In the new pane, on the bottom, do this:
1. click the padlock, and authenticate with your password.
2. change Privilege to Read & Write - just click what is there and options will appear.
3. close the pane. -
My mac pro is locked how to unlock
My mac pro is locked how to unlock?
Locked how exactly?
If you mean the drive is locked then see:
Fix Permissions for a Locked Drive
Open Terminal in the Utilities folder. Paste the following at the prompt. Press RETURN after each. The first command will prompt for you to enter your admin password. It will not be echoed to the screen. After entering your password press RETURN again.
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/*
killall finder
An alternative is to download BatChmod and use it to fix the permissions. -
Hi , I locked my macbook with pin by iCloud now i lost the pin code how can i unlock my mac ??
You will have to take it to an Apple Store (make an appointment) or an authorised Apple Service Centre together with proof of purchase.
-
How to unlock my external hard drive
My external hard drive is locked and I don'y know how to unlock it!
It says I'm only allowed to read it. (bottom)Your drive is formatted NTFS, which is a format used by Windows PCs.
If it is a brand-new drive, you should reformat it using Disk Utility (in your Applications/Utilities folder) - use the Erase tab to reformat it as "Mac OS Extended" format. Note that this will erase any existing files, so if there are files you need, copy them off to another location first.
Matt -
HT204306 How to unlock my IPad
how to unlock my iPad
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
i have purchase iPHONE 4S. During learning the application i have put mant times wrong passcode and my phone was disable. Plese tell us how to unlock it?
Kyderbylove wrote:
I locked my iphone 4s, I forgot the passcode and it says disabled connect to itunes. I have some very important information on the phone I can't lose, How can I retrieve that information if the phone was not backed up to icloud of my mac?
You can't. If your phone is disabled, the data has already been erased...that's the whole point of the passcode. Your only option now is:
Turn your phone off, then force it into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
How to unlock disabled iphone 5s
Dear sir,
i have disabled my iphone 5s, how to unlock disabled iphone 5s.
with regards
Amrinder singhLocked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
HT4623 how to unlock i phone 4s passbook
how to unlock from passbook dubel tuch in lock possition i phone 4s
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
Forgot code on ipod how to unlock?
forgot code on ipod how to unlock?
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
HT204053 how to unlock Ipaid Air if forgot passcode?
How to unlock a brand new Ipad AIR? I just started using the device... went thru the steps to create an Icloud ID but don't recall ever setting up a 4 letters passcode. Then a couple of days later I tried to use the device and it requested an passcode...since I didn't have the info I did try a couple of options and now I get the message "Ipad disabled". I did some rechearch in the internet and aparently I could do it via Itunes but I have never synched it up with Itunes. I also didn't have the time/change to setup the option to wipe out the device or find the device remotely.... I just use it to access my facebook and download a couple of pictures and now I can not longer use the device.
Please helpLocked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
IPhoto is locked, how to unlock
How to unlock iPhoto 11 on Mac 10.9 with marericks. Hold ing down option and command while starting iphoto does not work.
jpmorella wrote:
I Tried both and it did not happen. I still have my photos. Will I continue to get the locked out message? It goes into repair mode and then says the repar attempt failed. Any suggestions appreciated.
Yes it will continue until you resolve the problem - which is what the volunteers here are trying to help you do
So it does bring up the first aid window and then the repair fails? Remember we can not see you or your computer - you must post clear, concise descriptions of your problem and what is happening for us to provide help
If the repair is failing try each of the other first aid options in order
If they do not succeed then down load iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - and use its rebuild command to create a new library
LN -
I burned a bunch of music cds, using the burn folder.
They won't play. When I open the icon on the desktop, there is a picture of a lock in the upper left corner.
Disc utility reports that this disc is locked.
It doesn't tell you how to unlock the disc.
How did this disc get locked ?
THERE ARE NO references in the preferences or the
MAC help folder.
HELP DESPERATELY REQUIRED.
regards,
Jim BrunswickAFAIK, all cdrs are read only. Double-click it to open it and copy the stuff into a new folder on the desktop and eject the CD. Now, go to Disk Utlitity and create a new image of appropriate size, double-click on the disk image to open it, drag the contents of the folder into the image window, then eject the image. Go back to DU, select the dmg file and then Images->Burn.
Maybe you are looking for
-
How can i get the count vaule from GPIB?
I want to get the count waule from GPIB ,but I find that the vaule I get from GPIB now is the trace vaule , so I ask How can i get it.
-
How can I move an online number from one Skype acc...
I managed to get an online number but bought it for the wrong Skype account - is there any way I can get it transferred across to a different Skype account?
-
My hard drive crashed on my power pc mac mini. I replace it with a used (recycled) drive and the Apple Store installed Tiger 10.4. I tried to re-install Adobe Creative suite 2 but the install icon is not showing up when I try to install from CD's. Is
-
How can I get rid of the "hoax" Firefox window telling me to upgrade?
Every time I open Firefox 3.6.13, I get a window which tells me I'm running an old version and should update. Googling this, I found out it's some kind of hoax. It's really irritating and I'd like to find a way of preventing it from opening. Any idea
-
hello all, i create a procedure in oracle database 9i now i want call this procedure in oracle report 6i in "after parameter form" kindly guide me how can i do this......! thanks to all