How to unlock icloud activation if you are not the owner

how to unlock icloud activation if you are not the owner

Contact AppleCare (or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
I'm not exactly sure what procedures are in place for such events but Apple can assist in such cases, but it may take a while and you may need to provide a death certificate and a note from the executor that the iPad has been willed to yourself, along with an original proof of purchase.

Similar Messages

  • How to reschedule a meeting if you are not the organizer of meeting ?

    One User (say user-A) sends out a meeting invitation. Everyone accepts the same. Later, the meeting needs to be rescheduled but 'user-A' who sent out the meeting invitation is OoO. Is there a way out to do this from outlook / exchange ? Please suggest.
    Aditya Mediratta

    Hi,
    In Exchange server, we can give a user (say UserB) full access permission to User A's mailbox. Then User B can open addition mailbox to add User A's mailbox in Outlook and go to Calendar to edit the existing meeting. To give full access permission,
    please run the following command:
    Add-MailboxPermission -Identity UserA -User UserB -AccessRights FullAccess
    Alternatively, we can also just give UserB Owner permission to UserA's Calendar, then UserB can open UserA's Calendar to edit the meeting. To give calendar permission, we can use the following command:
    Add-MailboxFolderPermission -Idenitity UserA:\Calendar -User UserB -AccessRightes Owner
    Hope it helps.
    Regards,
    Winnie Liang
    TechNet Community Support

  • How do I stop this please You are not sharing your location. Sharing your location helps provide searches that are geographicaly closer to you

    When I go to this website it's giving me this
    You are not sharing your location. Sharing your location helps provide searches that are geographicaly closer to you
    This pops up how do I stop it there is NO x
    Thank you

    You can set the default setting for Share Location for all sites on the about:permissions page.
    *https://support.mozilla.org/kb/how-do-i-manage-website-permissions
    The about: protocol is used to access special built-in pages.<br />
    You can open built-in about: pages via the location bar like you open a web page and in most cases you see a special orange Firefox icon on the location bar.

  • You are not the candidate/staffing manager for the specified org unit

    Hi all.
    With cProjects 4.0 (SP10) we are using the staffing scenario "Resource manager via responsible organization" meaning that the role will be directed to the organizational unit specificed in the "staffing process" tab who then handles the staffing.
    Despite the above I get the messages from the Subject header when maintaining the role
    You are not a candidate manager for the specified or initial organizational unit   
    You are not a staffing manager for the specified organizational unit"
    As the scenario builds upon the project creating requirements through the role the above messages seem unlogical.
    Is there an explanation for why the messages are received?
    Best regards / Anders

    Hi.
    I also assume that is meaning of the message - but is that logical in this staffing scenario?
    The project (leader) should create & update the role and then hand it over to the org unit for staffing by changing the status of the role "Start staffing process".  The above message should not be received upon setting that status.
    It can not be the intention that the project leader should be assigned as a resource manager to all possible org units.
    Phrasing it differently, when the status of the role only is "Staffing in preparation" the project leader must be able to update it including setting the staffing status without these messages being received.
    When the status of the role is Staffing in process the only thing the project leader ought to be able to do is the reset the status of the role (cancel the staffing request).
    Regards / Anders

  • ICloud Contacts on iPad are Not the Same as the local Contacts on my iPhone..how can i put all my Contacts from iPhone into iCloud?

    I want to have all my local iPhone Contacts in the cloud to have them also on my iPad.
    iCloud only saved 36 from 225 total Contacts. My IPhone Contacts are saved on the iPhone itself, but how can I Transfer them into the cloud?

    The Mac uses Mac OS X and iDevices use iOS. These are two different operating systems and the apps must be written for each operating system specifically, even when the apps go by the same name, such as the iWork apps, they are two ifferent versions of the same app for the two different platforms.
    So, as an example, Safari has been written for three different operating systems, Mac OS X, iOS and Windows. And the Safari apps, as similar as they are visually, are not interchangeable for the different platforms.

  • Please tell me how to unlock 4 precious photos which are in the album starter edition

    All I can see is the
    thumbnails. Please help

    These files might not be present in the location which they were imported from initially. In case you have changed the location of those photos after you had imported into your Photoshop Album starter edition, those cannot be found by the application and will mark them as missing files. Hence you will need to manually point them to the current location.

  • You are not the account holder woes...

    Bit of a long story this...
    I used my email address to help my mum to sign up to BT about five years ago as she didn't have one. She has since left BT and uses another provider.
    I thought nothing at all of this when upon moving into my newly purchased home I signed up to BT for myself about a month ago, using the same email address as had been used all those years previous.
    I received the account number through the post and proceeded to sign up to myBT for online billing. On attempting this it stopped me as my email was already on the BT system. I used this address to log back into my mum's now long cancelled account and amended the email address of that one to another of my email addresses so as I could use my favoured address for the online billing. When I completed this registration it told me that I was not the account holder and that my mum was. 
    I used the chat help several times and was told that this was resolved within 7 days and to try again after that. I heard nothing and about 2 weeks later I have logged on to find the issue still remains. I again took to chat and the helper cancelled the myBT account connected to my mother's name (with the email address I didn't want to use) and told me it should now work. It didn't. Nothing changed.
    Tired of the chat service I then took to the phones. Three hours later and I have got nothing to show but a monumental phone bill (I do not have a phone to connect to the landline to take advantage of the 0800 service) so had to rely on the 0330 numbers. I have explained my problem to about 12 people, been kept on hold for over 30 mins, been promised a call back which never came, had an attempt to sell me additional services (insult to injury?!) and still nothing. Basically it now seems that nobody at all is the account holder and that nobody can access this profile.
    I can not access much of the myBT functionality and I can not watch BT Sport through the online service (literally the only reason I went with BT). The latest is that somebody will call me tomorrow although I am not going to hold my breath.
    This is the error I am getting... There is no option to change the account holder on the page, I can either click to go back a page or ring the number which I found of no use at all.
    Some of our services, such as the BT Wi-fi, BT Cloud and BT Sport Apps, are only available to the BT Account Holder. We may ask you to confirm if you are the Account Holder before you can use some BT services. You can check and change your Account Holder status on this page.
    You aren't the account holder
    - The account holder is *my mother's name*. 
    If you believe that you should be the account holder, please call 0800 800 150.
    I have access to two accounts...
    One in my mother's name using an email I don't want to use which is now (thanks to the BT employee on chat) not connected to any BT account. If I try and connect it using my account number it states that it willl be a guest account because *my mother's name* is the account holder. 
    One in my name with the email address I want to use. This is connected to the correct BT account but is again just a guest account with no access to the BT sport online app that I purchased the service for.
    I've paid for a year's line rental up front by credit card but before I call the bank and ask them to reverse this payment and cancel the direct debit for the monthly payment can anyone help at all? 
    Thoroughly cheesed off already. 

    I think the only way you are going to solve this is with mod help. Mods will post a contact us link after reading this post. 
    After completing the email NOT PM then you join a queue of other customers waiting for mod help. The mods will get back to you in 3/5 working days either by phone or email
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • How to know in an IDOC you are at the end of processing the EDIDD table?

    I am fairly new to processing IDOCS.
    I am working with the user exit EXIT_SAPLVEDF_002.  This is in the IDOC FM IDCO_OUTPU_INVOIC.  I am working with SAP AFS (the IDOC is /AFS/INVOIC02 but is the same as IDOC INVOIC02 with added logic for AFS).
    I know the FM processes one segment at a time and builds the EDIDD table and then passes it to the user exit after it adds each segment to the table.
    There isn't any other user exit that executes near the end of the processing - none that I could find.
    I am looking to do something that is similar to someone doing a SAVE in DYNPRO and using a user exit to do any final processing before the document is saved.
    Is there some segment name that is the key so that I know I am at the end of processing?
    Is there some status in the IDOC control record that would be set so I would know when it hits this that I can now review the entire EDIDD table?
    Points awarded for any help!
    Thanks.
    Scott

    I found the segment to search for - it's the summary segment 'ED1EDS01'.  It is passed after the detail processing has been added into the EDIDD table.

  • HT1212 how to unlock icloud if you cant contact previous owner

    i got a apple ipad 2 off the internet and i bought it non knowing of the icloud lock that it had and i asked the seller for the email and password to get past it and he never responded.

    bramfrommaastricht wrote:
    That's right, you've been duped. If possible, I advise you to see if you can cancel the purchase.
    Until that time, call AppleCare and ask for an Account Security advisor: https://www.apple.com//support/contact/
    Maybe - just maybe - they can find a way to unlock it. Don't get your hopes up too high though. You might have to go through Apple Legal and send in proof of purchases etc
    Good luck :/
    If you are not the original owner/purchaser of the device, Apple will do nothing to assist you in activating the device. This is incorrect information. Any proof of purchase of a device second hand will not get any attention from Apple.

  • Does anyone know how to unlock an IPAD, if you forgot th passcode

    Does anyone know how to unlock an Ipad, if you have forgotten the passcode.

    Follow the steps in http://support.apple.com/kb/HT1212 and you may need to it more than once.

  • HT4864 How can I change my iCloud email to my AppleID email they are not the same

    How can I change my iCloud email to my AppleID email?  They are not the same and somehow were switched by my teenage daughter.  I can access the account and change anything except my iCloud eMail account.

    Hi itsjeffb,
    If I am understanding you correctly, it sounds like your daughter may have set up an alias account under iCloud. Your AppleID email address may or may not be the same as you iCloud email address, depending on how it was set up. The following articles provide more information about iCloud email addresses and how aliases work under iCloud:
    iCloud: About your icloud.com, me.com, and mac.com email addresses
    http://support.apple.com/kb/HT2623
    iCloud: Using your @icloud.com email address
    http://support.apple.com/kb/HT5441
    iCloud: Create or change email aliases
    http://support.apple.com/kb/PH2622
    Cheers,
    - Brenden

  • I was adding something to one of my notes when half of my notes disappeared, how can I find them again, they are not even in my iCloud?

    i was adding something to one of my notes when half of my notes disappeared, how can I find them again, they are not even in my iCloud?

    http://support.apple.com/kb/HT1848  Did you transfer your purchased item, take a look at the link

  • Are not the right ones for the icloud account. How can I find out what these are?

    I have downloaded icloud onto my PC. When I try to access my account I am told that although my Apple ID and password are correct they are not the right ones for the icloud account.How can I find out what these are?

    Christine Helen wrote:
    I can't find any way of creating an icloud ID. I only have a PC. no Mac product except an iPod classic.
    Oh, then you can't unless you know someone with a Mac you could use for a moment or 2. (Like at the Apple Store)

  • HT201328 how to unlock my iPhone if you guys already agree to unlock it ?

    how to unlock my iPhone if you guys already agree to unlock it ?

    Apple doesn't unlock phones, your carrier does that.
    Anyway, there's no "you guys". People responding here and reading this are just other users like you.

  • How to unlock your ipad if you forgot your password, how to unlock your ipad if you forgot your password

    how to unlock your ipad if you forgot your password

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

Maybe you are looking for

  • Can Web Performance Test work on AJAX or Javascript Project which will show only one URL for all the pages?

    Hi there, I'm working on testing a AJAX and JavaScript Project which has several pages but all in the same URL. I need to test some attribute on the page or parameter past by AJAX or Javascript. Can Web Performance Test work to get what I want? Thank

  • Strobing Screen on MBA (all brightness levels)

    I seem to have gotten a Mac with all of the above. Losing WiFi connection, and not being able to turn WiFi back on. Screen randomly going black after sleep And now the new addition to the list: Screen flickering at approx 25 frames per second on all

  • Binary File to Array

    I need to choose a file with a file chooser and then convert it to an array.  The file is a binary file and I just want every byte out of it as an element in a very large byte array.  Im not quite sure how to go about this, can someone who has done t

  • Exception on overridden methods

    hi , we know that An overriding method in a subclass may only throw exceptions declared in the parent class or children of the exceptions declared in the parent class. but in a program it is written class base { public static void method1() { public

  • WebCRM Demo license

    Hi All, I have setup WebCrm on a test server with a demo license just to see if I can get it all working. I know I have to access the site locally and not across a network but besides this restriction, will all other functionality within the product