How to unlock iphone4 with the code

how to unlock iphone4 with the code

the page where i will put the codes is not coming up on itunes.
any help further.

Similar Messages

How to connect my app interface with the code in flash builder?

I'm a beginner and learning my way around actionscript,mxml and flash builder.So this may seem foolish but please bear with me,I'm creating a very simple ios app using flash builder,I have created a simple app interface (A background and a custom navigation bar)using photoshop for my app,now the question is how do i import it into flash builder so that i can connect it with the code i have written? or is there another simpler way to create a app interface using other products like fireworks or catalyst?
In short, I want to know how is an app interface created(wt software) and how is it connected with its code using flash builder.Any help would be greatly appreciated, and tutorials would be swell
Thanks!

Can you use stage.width or stage.stageWidth?

How can I print the "number lines" with the code in Visual Studio?

How can I print the "number lines" with the code in Visual Studio?

Hi BillionaireMan,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, please tell us more information,we will try my best to help you.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have an IPad with a Restriction code that we cannot remember. Is it possible to delete and restore the IPad without the code? If not how do I figure out the code or how t? o remove it?

I have an IPad with a Restriction code that we cannot remember. Is it possible to delete and restore the IPad without the code. If not how do I figure out the code or how to remove it?

The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

If you bought the boxed set of Logic Studio 2.0 which includes LP9, then you cannot download it. You must use the disks that came as part of the boxed set... to install from.
If you bought the App Store version of Logic Pro 9 then go to the Mac App Store App, Sign into the Store using the same Apple ID you used to purchase LP originally, look under the Purchase Tab and you shouldl find LP9 ready and waiting for you to download and install.

TS4006 I have a problem, I locked my MacBook Pro "mountain lion" with the find my iPhone app. When I returned home to unlock my MacBook thats where the problem began. I was unable to unlock the MacBook with the code I then called apple they cou

I've been locked out my MacBook Pro, I was able to lock the MacBook with the find my iPhone app but I'm unable to unlock it with the app or by punching in the code directly to the MacBook, so far the apple store or reps over the phone can not help. I've called a third party retail store for assistance and the tell me I have to pay, even if I get it to work or not... So far nothing these apple "genius" will do to help with this product solution.
I know my passcode/password but I am not able to log in....
Is there anyone that can help?

I would guess the fan is the cause of the noise. Suggest you take a look at it.
This site has a wealth of information about getting inside a Macbook or Macbook Pro.
http://www.powerbookmedic.com/mac-repair.php

How to unlock ipad with voice over?I even entered my correct password byt the voice over kept on saying it's wrong? 0409 is my password how come its wrong.. and the voice over kept on saying zero has no value?

how to unlock ipad with voice over and password? i already entered my correct password the voice over kept on saying its wrong..my password is 0409.. and the voive over says"zero" has no value?

Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off.

I am updating my iPhone4s with the most recent OS7.3software update and its been almost 3 hrs now and it has not completed its update. It is still " verifying updated iPhone software. How long does it take for the update to be completed. Thanks

i am updating my iPhone4s with the most recent OS software update and its been almost 3 hrs now and it has not completed its update. It is still " verifying updated iPhone software. How long does it take for the update to be completed. Thanks

Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck

HT201412 I have a new iPad Air and it is asking for my Passcode which I thought i knew but it is not turning on with the code I thought I entered?

I have a new iPad Air and it is asking for my Passcode which I thought I knew , but it is not turning on with the code I tought I had entered?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

I'm trying to add the system date with a Label. What is wrong with the code

import java.util.*;
import javax.swing.*;
public class CurrentDateApplet extends JApplet
     Calendar currentCalendar = Calendar.getInstance();
     JLabel dateLabel = new JLabel();
     JPanel mainPanel = new JPanel();
     int dayInteger = currentCalendar.get(Calendar.DATE);
     int monthInteger = currentCalendar.get(Calendar.MONTH)+1;
     int yearInteger = currentCalendar.get(Calendar.YEAR);
     public void init()
          mainPanel.add(dateLabel);
          setContentPane(mainPanel);
          dateLabel.append(currentCalendar.get(Calendar.HOUR) + currentCalendar.get
                    (Calendar.MINUTE);
}

As for what's wrong with the code, it would be easier if you said: it doesn't show the date (it does this instead), it doesn't compile (I get this message) etc.
Anyway I'll assume you want to display the time in a label...
dateLabel.append(currentCalendar.get(Calendar.HOUR) + currentCalendar.get
(Calendar.MINUTE);This won't compile: the parentheses are mismatched, and there is simply no such thing as append(). So we could trydateLabel.setText("" + currentCalendar.get(Calendar.HOUR) + currentCalendar.get(Calendar.MINUTE));This wroks, but looks pretty nasty and it's not how you are supposed to format dates and times. Here's the unofficial party line, nicked from one of jverd's posts:
Calculating Java dates: Take the time to learn how to create and use dates
Formatting a Date Using a Custom Format
Parsing a Date Using a Custom Format
From those links you should be able to find those applicable to times like this: http://www.exampledepot.com/egs/java.text/FormatTime.html
Using this approach you would end up with something like:import java.text.Format;
import java.text.SimpleDateFormat;
import java.util.Date;
import javax.swing.JApplet;
import javax.swing.JLabel;
import javax.swing.JPanel;
public class CurrentDateApplet extends JApplet
    private Date date;
    private JLabel timeLabel;
    private JPanel mainPanel;
    public void init()
        mainPanel = new JPanel();
        timeLabel = new JLabel();
        mainPanel.add(timeLabel);
        setContentPane(mainPanel);
        date = new Date();
        Format formatter = new SimpleDateFormat("HH:ss a");
        timeLabel.setText(formatter.format(date));
}

Changes made in BCC how it be impact in the code & Database

Hi,
Whatever changes made in BCC how it be impact in the code & Database . Example : Price ll be change in the BCC . Could u please briefly explain about this.

Hi Gugan,
From your description if i am understanding correctly, i think you are looking for information on BCC VS production like the changes which are performed in BCC how they are reflecting in DB and then production, if this is your question.
BCC will have its own Database which is version and maintain the information of production Database and agents which are our production sites.
When you observe CA console you will come to know about agents, along with that there will be a repository mapping which will map source repository to destination repository which will make sure that the data is mapped to correct repositories.
after configuring all required sites and repository mappings when we do a deployment with changes, a successful deployment will push the data to the production data base and a cache invalidation will take place so that the newly deployed changes will appear on the production site.
you can find a very nice explanation on ATG Content Administration Programming Guide
if you are looking on some thing else feel free to update the post.
Thanks & Regards
Suman Vasireddy
Please mark any update as "Correct Answer" or "Helpful Answer" if that update helps/answers your question, so that others can identify the Correct/helpful update between many updates.

When accessing the any tasks from Fusion Applications homepage, "An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/

We have installed HCM and CRM modules on Fusion Application 11.1.7 version.
This is 2 node architecture ie IDM components installed in one node and Fusion components installed in another node.
We are able to start the IDM components and Fusion components successfully, but when users are trying to access any task from Fusion application home page, they are getting the below error
A portlet consumer error was received for the task Manage Worker Goal Setting Lookups. Report the error details to the following owning product Goal Management.
An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/fnd/applcore/lookups/publicUi/flow/ManageCommonLookupsTF.xml#ManageCommonLookupsTF of module code fndSetup. Review the consumer and producer logs for more details on this error.

This may be related to the other issue regarding "FUSION_APPS_WSM_APPID-KEY" as the logs contains exceptions like:
oracle.wsm.policymanager.PolicyManagerException: WSM-02081 : Failed to login to perform requested action.
Please refer to document Fusion Application Service Account Password Expiration Causes Portlet Producer Errors (1486388.1) for steps on how to verify and set the password. There is also exception:
javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User FUSION_APPS_PROV_PATCH_APPID denied
This is also likely caused by an expired password, please see Fusion Apps Servers Are Not Starting Up - Password Policy Error :9000: GSL_PWDEXPIRED_EXCP :Your Password has expired (1629927.1).
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

[SOLVED] What exactly does gcc's -Os do with the code?

Hey all,
The application that sets my statusbar in DWM, written in C, recently starting segfaulting after I changed the code (commit). I initially traced it down to being that I specify -Os to gcc in the Makefile (without that, it runs fine) and then I traced it to the perc variable in get_battery. If I stop sprintf'ing that into buf, it also doesn't segfault.
This made me start digging through the gcc documentation and now I'm stuck with two questions:
1. What does -Os do exactly with my code? I.e., does it only reduce the size of the binary (how?) or does it also do some optimization as -O1/2/3?
2. Is another optimizer (-O3) "better" than -Os? The code runs fine with this, for example.
Thanks in advance for your insights!
Last edited by Unia (2013-10-12 20:35:05)

@Karol: yes, I read that, but it doesn't really clarify (to me at least) what it does with the code or why this could cause a segfault.
@Hiciu: Here is the output:
Starting program: /home/jente/projecten/dwmst/./dwmst
warning: no loadable sections found in added symbol-file system-supplied DSO at 0x7ffff7ffa000
warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff75c2320 in XChangeProperty () from /usr/lib/libX11.so.6
(gdb) bt
#0 0x00007ffff75c2320 in XChangeProperty () from /usr/lib/libX11.so.6
#1 0x00007ffff75df584 in XStoreName () from /usr/lib/libX11.so.6
#2 0x000000000040133b in ?? ()
#3 0x00007ffff6658bc5 in __libc_start_main () from /usr/lib/libc.so.6
#4 0x00000000004013a5 in ?? ()
(gdb) print perc
No symbol table is loaded. Use the "file" command.
It doesn't seem to be segfaulting with perc, but rather in my call to XStoreName... strange. Especially strange because before I restructured my code, it never segfaulted with -Os. I will double check my commit to see if I changed something...
@Trilby: Indeed I think it's there from when I forked this from you - at least, I don't remember adding it myself. I'm also questioning now why one would have that, if it doesn't optimize the program anyway.
@jdarnold: Yes, I compile my code with both -Wall and -Wextra. Here are all the options I pass to gcc in the Makefile:
CFLAGS = -Os -pedantic -Wall -Wextra -Wno-format-zero-length
Those -Wno-format-zero-length I added just to supress warnings about sprintf'ing an empty string into buf, when for example I have no music player running.
I guess I will just remove -Os, but I'm still curious as to why it is causing a segfault.

Multiple Users Login ( Help With The Code ) Please.

Hi all. Please help me...
I'm using www.wix.com to create my websites.
but since Wix.com don't able us to have member system conecet to database, i use Flash SWF As3 files...
Please can anyone help me with the Code?
Username=1    /Password= 1    /Url= www.1.com
Username=2    /Password= 2    /Url= www.2.com
Username=2    /Password= 2    /Url= www.2.com
*If user name 1 or 2 or 3 correct. Show massage ex: Welcome back, if not correct " Bad login"
*When login, it will open the url but in new page after the old one closed.
+ There is anyway to add " Password recovaring box too"?
but not connected to datdabase as i said?
Please help me, please! i areadly have code but it don't work for more than one user.
Thank u soooo much!!
Loai

Here's the code i have already,,
but i don't know how to add more than one user + when login it open new window ( popup ) i want it to open in the same window...
Please help.
stop();
//hide the password
//pass_txt.displayAsPassword = true;
//adding event listener to the login button
login_mc.addEventListener(MouseEvent.CLICK, loginUser);
function loginUser(e:MouseEvent):void{
//if both username and password are correct let the user logged in
if(name_txt.text == "1" && pass_txt.text == "1"){
navigateToURL( new URLRequest( "http://www.wix.com/designersgroup/tutorials/9-1" ), "_blank" );
display_txt.text = "Going to secure area";
else if(name_txt.text != "1" && pass_txt.text != "1"){
display_txt.text = "Login failed!";
if(name_txt.text == "2" && pass_txt.text == "2"){
navigateToURL( new URLRequest( "http://www.wix.com/designersgroup/tutorials/9-2" ), "_blank" );
display_txt.text = "Going to secure area";
else if(name_txt.text != "2" && pass_txt.text != "2"){
display_txt.text = "Login failed!";

How to unlock iphone4 with the code

Similar Messages

Maybe you are looking for