How to unlock my 4th generation ipod?

My Ipod is locked and I have forgot the password, how do I unlock my password & re-set the password?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.                        
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes       
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store        
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Similar Messages

  • How to change my 4th generation iPod with 5th generation iPod under exchange program

    how to change my 4th generation iPod with 5th generation iPod under exchange program in uae?

    Apple does not have such an exchange program.  There is a general "recycling" program
    http://www.apple.com/recycling/ipod-cell-phone/
    (see International link in the right column)

  • How to i add my phone number onto my 4th generation ipod

    how can I add my phone number to my 4th generation ipod touch

    The iPod only has  phone number (only  for FaceTime and Messages) if the same Apple ID used for those services on the iPod is also used on an iPhone with iOS 6 and later
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage

  • HT1386 how can I unlock a 1st generation Ipod touch?

    how can i unlock a 1st generation ipod touch that i forgot the password to??

    Connect the iPod to your conmputer and restore via iTunes. Place the iPod in Recovery mode if necessary to allow the restore.

  • How do you get iOS7 on 4th generation iPod

    How do you get iOS7 on 4th generation iPod?

    You can't
    A 4th gen iPod doesn't have enough RAM for iOS 7 to be installed.
    Allan

  • I have model a1367, 8gb, 4th generation ipod touch.  how do I update it from ios 4.2.1 to 6 or more?

    i have model a1367, 8gb, 4th generation ipod touch.  how do I update it from ios 4.2.1 to 6 or more?

    Update it from iTunes on a computer as described at the bottom of this article; there isn't a Software Update option in General on iOS versions prior to 5.0. It can only be updated directly to the newest iOS release supported by the device’s hardware, which is iOS 6.1.6 for a fourth generation iPod touch.
    (118217)

  • I bought a refurbished 4th generation ipod touch. How do register it?

    I bought a refurbished 4th generation ipod touch. It's registered as a camera. How do I re register it as an ipod?

    Sounds like you mean that the iPod is not appearing in iTunes on yuor computer. If so then:
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    If necessary:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • My 4th generation iPod has iTunes logo and power cord on sreen, how do I fix it

    My 4th generation iPod screen is locked with a picture of the power cord and iTunes logo, how do I fix it?

    just plug it into the computer and follow onscreen directions

  • HT4972 Both my iPod and computer (mac) say that iOS 6.1.5  is the latest software available. I have a 4th generation iPod touch, how do I get it to update to iOS 7?

    Both my iPod and computer (mac) say that iOS 6.1.5  is the latest software available. I have a 4th generation iPod touch, how do I get it to update to iOS 7?

    . As Apple said in June, iOS 7 is not compatible with the 4G iPod.
    All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

  • How do i use panorama on the 4th generation ipod?

    i saw it said that the ipod touch gets the panorama mode but does anyone know if does work with 4th generation ipod touch?

    No, just the iPhone 5, 4S, and the iPod touch 5

  • My 4th generation iPod nano was washed, screen is super dim, how can I fix this?

    So a few months ago, I accidentally left my blue 4th generation iPod nano in my pant pocket. My clothes were set to wash with the iPod in my pants. I'd completely forgot about it being in there. After finding out what had happened, I let the iPod soak in a jar of rice for about a month. I took it out to see if anything had worked but it wouldn't turn on.
    Thinking it might need a charge, I plugged it in and found that it turns on only while it's plugged in and instantly turns off when unplugged. I also noticed that the screen is extremely dim, even when put on full brightness. It's as if I turned the brightness all the way down, even though I'm putting it all the way up. I also tried connecting it to iTunes to try to see what I could find. The attempt was unsuccesful as the iPod went unrecognized on iTunes v10.5.
    I'm not sure what else I could do to fix this. Has anything similar to this happened to you before?
    Also, I have a 4th generation iPod touch and iPhone 4. I honestly don't need this iPod at all, but it'd still be nice to get it fixed for extra use.
    Thanks for any help in advance!
    -Tony

    I would recommend taking it in to your local Apple Store to see what the people at the Genius Bar can do for you.

  • New macbook pro wont connect to my 4th generation ipod touch.

    I just bought a new macbook pro and when I plugged my 4th generation ipod touch into it the ipod just flashed the battery sign off and on and made the dinging noise continuously and it never connected to my computer.  How can I get it to connect?   I've never had issues with my windows computer.  I tried different a different cord and it didn't work either. 

    I was able to figure it out

  • Why does my note show not show correctly when I open it in my 4th generation iPod?

    The instructions on how to add a note or text document to view in my 4th generation iPod nano say merely to add a copy of the text document to the 'Notes' folder shown when viewing my iPod's files in 'My Computor.' I did so with a document, but it came up only showing 'PK' when I opened it on my iPod. I also tried adding a book I had purchased from iTunes to my iPod but it also only came up with 'PK'. I don't really understand what's going on as I came view the file just fine when it's opened on my computor, just not on my iPod.

    Books in the epub or iBook format are not compatible with the 4G Nano.  As for the text document, what did you give it as a name and extension?
    Did you copy and paste text into this note or did you type it out manually?
    B-rock

  • I am trying to reset my 4th generation ipod touch via itunes (as I cannot remember parental controls code). In itunes it does a download but then says the software was corrupted during download. Itunes is up to date. Operating system is vista. Any ideas?

    I have given my 4th generation ipod touch to my husband and he wants to download some in app purchases, so I am trying to reset it via itunes. I dont remember setting parental controls but I must have at some point, maybe when I lent it to the kids. But I cannot remember the password and nothing I have tried works. So I have backed the ipod up and am trying to reset it but after speding 10 minutes doing a download I get a message that says:
    "The softwaar for the iPod was corrupted during download. Disconnect and reconnect, then try again. Make sure your network settings are correct and your network connection is active, or try again later"
    I have tried many times. All the settings are correct, and the network seems to be working fine in all respects.
    Any advice very much appreciated.
    Thank you
    UPDATE - decided to try one more time after trying for hours and it has worked! I now suspect it may have been because my son was playing an online game. Though we have plenty of bandwidth. But in case, I guess it could be a bandwidth problem.

    A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to
             update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Why is my 4th generation ipod capacity showing 6.46GB instead of 8GB

    why is my 4th generation ipods capacity showing6.46GB instead of 8GB

    Most of the difference is taken up by the iOS itself.  The other is due to how GB are advertised and actually used.  See the Consumer confusion for the later.
    Gigabyte - Wikipedia, the free encyclopedia

Maybe you are looking for

  • Macbook pro can't find my computer

    My Macbook Pro suddenly can't connect with my brother printer. How can I try and sort this out

  • How can I use jbo:InputSelect for a char type filed?

    How can I use <jbo:InputSelect for a char type filed? I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column. There is a pr

  • Ovi App Reviews-Non English

    Hi all, Ovi App store is improving day by day...I would like to draw your attention to a small bug there. When I go to review page for any App, it shows reviews in all languages instead of English (When I browse it from UK). And some even write their

  • MM related database table list

    What database tables are used by an ABAPer for the second phase of MM workflow called "Source List : ME41"?

  • What is the best way to manage the large FinalCutProX files

    We are continously running out of space on our desktop with the FinalCutProX files being so large. We have moved most of the files (events & projects) to an external server and working off the single video projects from our desktop. How are you worki