How to unlock Palmone Treo 600 ?

Need help to unlock palmone treo 600 after updating with Treo600 Row updater 1.12. Thanks
Post relates to: Treo 600 (GSM)

You must have used a carrier's software update such as AT&T or Cingular. What is the full software version 1.12-CNG (Cingular), 1.12-AWS (AT&T). This would have locked the device back to the original carrier.
Only the original carrier can provide an unlock code for the device. This device is quite old now, and you may have a problem getting an unlock code for it.
If the software version is 1.12-ROW it should work with any SIM card.

Similar Messages

How to Unlock palmone treo 600 IMEI 010215002452680?

Hello
I updated my Palmone Treo 600 with TREO600 updater 1.12 ; unfortunately my palm was locked sothat I couldnt use any sim cards. Please, I need help to uninstall this updater and return to previous setting. THanks
Post relates to: Treo 600 (GSM)

You must have used a carrier's software update such as AT&T or Cingular. What is the full software version 1.12-CNG (Cingular), 1.12-AWS (AT&T). This would have locked the device back to the original carrier.
Only the original carrier can provide an unlock code for the device. This device is quite old now, and you may have a problem getting an unlock code for it.
If the software version is 1.12-ROW it should work with any SIM card.

Palmone treo 600

i just recently purchased my first palm treo i know its an older one but thats okay. here is my problem, when i received the phone it worked fine for 2 or 3 days, was told it was the battery, bought a new battery and when it was fully charged i was setting it up and it was all good, 15 minutes later phone went completely blank, the green light in the corner was still lit but thats it, referred to the manual did the reset and was fine for like 2 minutes and now nothing at all. what is wrong ??????
Post relates to: Treo 600 (GSM)

It could be the connection from the charger to the battery. If this is the case then unfortunately you need to have the device repaired/replaced. If you just bought it see if the seller is willing to give you a refund. If he will not you can have the device repaired by a 3rd party. Unfortunately we no longer repair the Treo 600s. One such place is www.pdaparts.com

How to unlock my treo 750

Hi,
I bought a treo 750 from ebay an intended to use it with t-mobile. I calle AT&T and they gave me the unlock code but I didn't know that I had to press the power option button down before entering the unlock code. So after 5 trials the phone won't accept any code again and is now permanently locked to AT&T it seems. ANy ideas please. Will greatly appreciate.
Post relates to: Treo 750 (AT&T)

Hi ngumba,
This is actually part of the security of the lock. After 5 incorrect attempts, the device will remain locked for a timeout period (I forgot how long it is but I believe it's a few hours). Just to be safe, wait 24 hours and try again.
Post relates to: None

Vista 64-bit and Treo 600 Hotsync solution that works!

I too searched many, many forums and sites for a solution to this problem. And I have found it.
I have an HP dv9260 laptop with Windows Vista Ultimate 64-bit and Office Pro 2007, which I bought in June this year. And I have been unable to sync my Treo 600 to it - until now. (I had even resorted to syncing to my older Toshiba Tablet PC (WinXP Pro, Office Pro 2003) via standard USB sync cable, connecting the Tablet to the new HP with a Belkin Easy Transfer cable, exporting my updated Contacts, Calendar, and InfoSafe records to .vcf, .ics, and .txt files, then transferring between the HP and Tablet, and then importing them into the appropriate app - Whew! man what a pain.
Now I have found a far more elegant and simple method. I found an Infrared USB 2.0 adaptor (dongle) at the Chunwai_1996 store on eBay (http://cgi.ebay.com/NEW-USB-2-0-IRDA-ADAPER-4Mbps-SUPPORT-VISTA_W0QQitemZ110164766509QQcmdZViewItem) for $8.33 USD + $5.67 USD S&H (total $14.00 even) (I believe that the price is now $12.49 USD + $5.67 S&H.) , which said it supported and supplied drivers for 64-bit Vista. It took a little over two weeks to receive the device from Hong Kong (received yesterday, 08-31-2007).
I checked the mini CD that shipped with it but found no Vista drivers. So I just plugged it into a USB port on the laptop. Vista immediately recognized the dongle and installed generic Vista 64-bit drivers from Microsoft. I tested the unit by placing the Treo near it. The unit recognized the Treo as a legitimate device! Next, I followed the directions I found in another thread that had been successful with USB 2.0, Vista 32-bit drivers, and the Treo 600, with one slight modification. Here is a repost from the Vista-Help.ca blog by Kerry Brown, verbatim except for a couple of modifications and few additional steps.
=============================================
Palm Treo 600 with Vista and Office 2007
I've had a lot of people ask about how I got my Treo 600 phone to sync with Outlook 2007 in Vista so I thought I'd write up the procedure. Hopefully Palm will have new Vista compatible software soon but in the meantime here's how I got it working on two computers so far. First you have to use Vista x86. I couldn't get it to work with Vista x64. If you've already tried to get it working then you have to clean up all the leftover stuff before continuing.
1. Uninstall Palm Desktop
2. Insert the CD that came with the Treo but don't let it autorun.
3. Navigate to the correct language folder on the Treo CD and right click on setup.exe
4. Set the compatibilty for XP SP2 and Run as administrator.
5. Run setup.exe
6. During the install the initial sync may fail. Just tell the installation to continue.
7. If you want to sync with Outlook make sure you pick this option during the install
8. Once it's finished close the Hotsync System Tray application.
9. In Windows Explorer go to the Palmone folder in Program Files.
10. Right click hotsync.exe and set it to run in administrator mode with XP SP2 compatibility.
11. Do the the same for palm.exe.
12. Start the Palm Desktop and change the Hotsync settings to manual start.
-and- 12a. ******* Check the Infrared option to make it active and available *******
13. Exit Palm Desktop and reboot.
You should now be able to sync the Treo 600 with Outlook 2007 or Palm Desktop. You will have to manually start the Hotsync application and deal with a uac prompt because it is set to run in administrator mode. The sync only works when Outlook is not running. You also have to sync twice. The first time you will get errors about the default folders for Outlook. Ignore the errors and press the sync button again. If it still doesn't work reboot and try it again. Good luck. Let me know if you find an easier procedure.
=====================================================
After rebooting the laptop, I performed the following additional steps:
A. Manually started the Hotsync app (you can put it in the Startup folder to auto load at Startup).
B. Set the Custom options to "Desktop overrides Handheld" for Contacts, Calendar, Tasks, and Notes - this may help avoid duplicates from the first Hotsync. Also, this is just a temporary override from the default setting "Synchronize the files" for each selection.
C. Selected Hotsync on the Treo and enabled the Infrared option.
D. Pressed the Hotsync 'button' on the Treo and placed it pointing at the Infrared dongle.
The Hotsync ran to completion without errors! Though it did take a good deal longer since it only runs at 115.2 kbps vs. the 480 Mbps of USB 2.0, I am happy.
Hope this helps others with Vista 64-bit systems and Palm OS handhelds.
Cheers.
-Robert
Post relates to: Treo 600 (Verizon)

Will this solution work for the Palm Treo 755p?
Post relates to: Treo 755p (Sprint)

How can I install applications on my palm treo 600 using memory card and a reader???

I tried so many times installing applications such as games and other software on my treo 600, but nothing shows in the launcher. I don't have a hotsynch tahts why this is my only option. I can see theapplications I download from my laptop to my treo 600.
When I download using a pc, it is in zip file, then I extract it. Latly, copy paste to my memory card. Is there something wrong about it? Please help... I don't have any application on my treo 600. Its been a week exploring, but still don't get the answer.
HELP!!!
Thank You So Much
-Rose
Post relates to: Treo 600 (GSM)

-vic0021- wrote:
Thank you for the info...
If I install the "myinstall", will it show automatically on the launcher??? If I buy a hotsynch in ebay, would that be better or mmc and a reader is fine? Will I als need the Cd?
Thanks again!!!
Post relates to: Treo 600 (GSM)
HotSync is a program, not something to be purchased on eBay!
It is part of a free program from Palm called "Palm Desktop". Go to the pages Hook directed you to, download and install the program.
You can then install programs to your Palm correctly! You will not need the CD.
You will need a program called Documents To Go to easily use Microsoft Word and Excel files. This will have to be purchased from Dataviz.com. Be sure to look for a version that is compatible with your device.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Vista 64 Treo 600 Sync Solution that should also work for Vista 32

Ok Here is a partial solution for a Treo 600 (Bell) with Vista 64 (along with my Treo 755p TELUS)
I recently purchased an Acer with Vista 64 to replace a XP machine that was having increasing hardware failures. I did not know at the time there was no support for Vista 64 and that Palm had only released a Vista 32 desktop the week before.
I managed to install the Vista 32 bit desktop software on my Vista 64 machine with no error messages but when I tried to install my Treo 755p I found out about the lack of Palm USB Vista 64 drivers
Insert Palm wasting time on Folio instead of Treo driver support rant @#!%!#%^^!#^@^@!%#!!!!!!! (I know it should be longer but most of it has been said before) Ok back to business.
Treo 755p
On the Palm forums I found the instructions for getting a Treo 755p to sync via Bluetooth
I followed the instruction and purchased a Blue Tooth USP key (Oh and I tried the Kensington - Bluetooth 2.0 USB Adapter first...^$%^@@^@^!!!!! before I found the Iogear USB Bluetooth 2.0 Class 1 Wireless Adapter which works fine and is the only one I would recommend) I now have my Treo 755p working with Vista 64 with only one error message (I'll get back to it later)
Treo 600
I was not impressed with the fact that this device had not support at all from Palm for Vista (32 or 64) $#%^!%!^@^@^%@ (ok I feel better)
I found a suggestion from a UK site that mentioned you could sync a Treo 600 via IR and even suggested the correct IR USB unit to buy (SITECOM CN-100)
http://www.sitecom.com/product.php?productname=USB+to+fast+IrDA+adapter&productcode=CN-100&productid...
Unfortunately that particular IR USP reader is only sold in the UK. So I took a chance and ordered a "Cables Unlimited USB IRDA Adapter tem Number: C250-1160 (about $17.00 Cdn). It arrived a few days later and it installed on my Vista 64 machine immediately without requesting any "driver disk" I followed the instruction from Palm on how to set up a USB Sync and tried to sync. The Vista machine identified the Palm and was willing to work but the Palm desktop and active sync was not responding. I reread the IR instructions and it requires you to complete a USB sync first (@!#$!$#%!^%!#%~%!!!!!!!)
So I took a night to think about it. My only solution I could think about was to see if I could fake out the Palm desktop / sync software. I fired up the old XP device and copied the user profile for the Treo 600 and copied it into the correct location on the new Vista 64 machine. I tried IR sync and low and behold it worked. (Oh and an IR Sync takes a very, very long time) After the first sync I received a few errors, my Documents to Go files were in new locations, some calendar and memos were duplicated all were very minor. I manually fixed those errors and then completed IR Sync and the Treo 600 now works with a Vista 64.
Of course this solution only works providing you have access to your old Profile, but I figure if you been using a Treo 600 you probably not a new user. If your completing a totally new install on Vista I would suggest find a XP machine install it on it and complete sync, then copy that profile to the Vista machine.
Treo 755p Back up Error
The one error I received was it was unable to back up this file PmTraceDatabase
The message read: “Protocol Error: Handheld file could not be opened. (4004)
-SYNCERR_FILE_NOT_OPEN”
I looked for this file in my profile on the old XP machine and was unable to locate it, but I noticed they the Treo 600 didn't have this message when I copied over the entire profile, I tried to do the same with my Treo 755p profile but the error did not go away. So after researching the Palm Forums I found this simple solution
http://forums.palm.com/palm/board/message?board.id=windows_hotsync&message.id=28291&query.id=134275#...
So now that I have spent the last 3 weeks trying to get both of our Palms working with Vista 64 I figure the 64 bit USB drivers should be available any day now.......oh and I'm now hating Vista less......
Post relates to: Treo 600 (Bell Mobility)

Used Cables unlimited IrDA wireless Bridge....followed instructions...installed included software...even with Vista 64 and Zire 31...worked like a charm!
Post relates to: Zire 31

How to unlock earlyer purchased iphone 4

how to unlock earlyer purchased iphone 4? i have paid the full 600 $ !!!!

talktoupen wrote:
well u r right but i have buy this product before 3 months and they just launch this unlock iphone, and if they want i can spend 50 $ extra for unlocking. this is unfair to those who buy before 3 to 6 month. like me there are so many in the que. is there any home work available at that time than u r right i didnt done my home work but i think u didnt get my point, this will help u to clear my point .
I think everyone here understands your point. And I also think everyone here would agree that it's unfair for AT&T not to allow unlocking for an iPhone that is out of contract. But that's the way it is - it's completly up to AT&T and they not allow unlocking at any time for any reason - and there's nothing more anyone here can say.
Regards.

Remember the Treo 600? I can't sync to the computer!!!

I have a 600 which I still believe is the best phone Palm made, but for some reason I don't have the software to download the pics into the computer..does anyone know where to get it from? Thx, Paul

Hello and welcome to the forums;
For software downloads, check the support page for your device here (based on the unlocked Treo600):
http://kb.palm.com/wps/portal/kb/na/treo/600/unlocked/downloads/page_en.html
There you can download the recommended version of Palm Desktop for your device. Using a newer version of Vista may change the recommended version, however. Version 6.2 is recommended for any OS newer than XP.
Also, if this is a newer computer, you need to know if it has a 64-bit OS or not. If you have a 64-bit OS, you cannot sync via cable. The only options for 64-bit sync are Bluetooth and IR. You can see more information regarding 64-bit synchronization in this 'sticky' thread:
http://forums.palm.com/t5/Windows-HotSync/Windows-7-and-Vista-hotsync-instructions-here/td-p/251755
Hope this helps,
TreoAide

How to Unlock root user in Linux version 4.4

Hi All,
Please let me know how to unlock root user as i tried to access with wrong password more than 3 times.
Thanking you in advance

Hi All,
We tried to reset the root password in single user mode and tried to change the passas follows:
we are getting error message as follows:
sh -3.00#passwd root
Changing password for the user root.
New UNIX password:
Retype New UNIX password:
passwd: Authentication token manipulation error
Please suggest how to change the root password in single user mode

I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation polic

I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation policy that is assigned by the server activion. this is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request que this iphone be unlocked by your carrier. Please contact Apple for more information. "
I need help, I use my phone for everything enclusive to work. I appreciate if you can help. I'm from Brazil. My name and giullia.

Did you purchase this device from Apple or an authorized reseller? It sounds as if you had a device that was jailbroken/hacked to operate on your carrier. Upon updating the iOS, it is now locked back to the original carrier the device was locked to.
Only the carrier the device is locked to can authorize an unlock. You will need to make contact with that carrier and see if they provide unlocking services, and if they do, if you qualify for an unlock. Otherwise, you are out of luck. One that carrier can take care of the unlocking.

How to unlock my macbook pro i forgotten my password?

How to unlock my macbook pro i forgotten my password?

Look on the right, under the heading More Like This.

HT4113 My friends locked my iphone and now it says that i need to plug it into itunes. I cant find any info on how to unlock it, what do i do?

My iphone got locked and it says i need to plug it into itunes. But i cant find any info on itunes on how to unlock it, what do i do?

See here: http://support.apple.com/kb/HT1212
Don't let them touch your phone again.

How to unlock my iphone 4? iOS 6.1, modem Firmware 04.12.05

Im her now in Philippines, i want to use my iphone 4 her in philippines, plssss... help me, on how to unlock my iphone 4 softbank Japan....

softbank does not unlock phones.

How to unlock my mom's iPhone 6 Plus?

My mom used to have iPhone 5 and then she bought an iPhone 6 Plus. She gave her iPhone 5 to my sister. My accidentally used find my iPhone app to track my mom's iPhone 6 Plus and my sister press lost mode button. The problem now is how to unlock my mom's iPhone 6 Plus because of my sister wrongly behaviour pressed the lost mode button on her's iPhone 5

SEARCH!!!
http://lmgtfy.com/?q=Disable+iphone+lost+mode

How to unlock Palmone Treo 600 ?

Similar Messages

Maybe you are looking for