How to unlock sequence if I forgot the password?

how to unlock sequence if I forgot the password?
I set the password a few years ago and have forgot it ,but now I want to edit it,how can I do?

Duplicate - http://forums.ni.com/ni/board/message?board.id=330&message.id=25631#M25631
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Similar Messages

  • HT4061 How to unlock iPad if you forgot the password?

    I cant remember the passcode to unlock My Ipad. How do I get it unlocked?

    You may have to force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • HT201302 how to unlock iphone when you forgot the passcode

    how to unlock iphone when you forgot the passcode

    Back up and then restore the phone in iTunes on the last computer it was synced with, as outlined in this article: http://support.apple.com/kb/HT1212.

  • How to unlock ipad when you forgot the passcode

    How to unlock ipad passcode when you forgot it???

    boysmom24 wrote:
    How to unlock ipad passcode when you forgot it???
    Please search the forums before posting or see the "more like thiis" section on the right side of this page.  Your question has been asked and answered hundreds of times.

  • HT204266 How to unlock iTouch if you forgot the passcode

    I forgot the passcode that I used for my iTouch. I changed the password and totally

    I forgot the passcode that I used for my iTouch. I changed the password and totally
    ... forgot what you were going to say?
    If you cannot remember the passcode for your iPad, iPod Touch, or iPhone, you will need to restore it using the computer with which it was last synced. This allows you to reset your passcode and resync the data from the computer, or restore the device from a backup.
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    Refer to Updating and restoring iPhone, iPad and iPod touch software.
    iOS: Wrong passcode results in red disabled screen
    iOS: Unable to update or restore

  • How to unlock ipod when you forget the password?

    HI! Sorry but i need help to unlocked my ipod because i´ve forgotten the password...

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...

  • I can´t unlock my ipod i forgot the password is there any way i can open my ipod ç, i can´t unlock my ipod i forgot the password is there any way i can open my ipod

    i can´t unlock my ipod

    Connect the iPod to your computer and restore via iTunes. Place the iPod in Recovery mode if necessary to allow the restore.

  • How do I unlock my I pad if I forgot the password?

    How do I unlock my iPad if forgot the password ?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad/iPod into Recovery Mode
    http://support.apple.com/kb/ht1212

  • I haven't had my phone 4 for a while and now i can't unlock it because i forgot the passcode. How do i simply get back in? asap

    I haven't had my phone 4 for a while and i need to unlock it asap, but forgot the password, How do i simply get back in? asap HELP

    Hi
    Check this:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212

  • How to unlock my i pad 2 if i forgot the password. tq

    afternoon ,
    how to unlock my ipad2 if i forgot the password???? tq

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How do you unlock an ipod touch if you forgot the password?

    How do you unlock an ipod touch if you forgot the password?

    You can't. Type in the wrong password until, it says "Connect to iTunes". Then connect it to iTunes. You will wait 1 minute, five minutes, 15 minutes, then 60 minutes, then you can connect it to iTunes.

  • How can i unlock my unlock my iphone 4 i forgot the password?

    how can i unlock my iphone 4 i forgot the password?

    If you have a passcode to the screen lock that you've forgotten, restore the device from the computer to which the device is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    If your device is running iOS 7 and you set up Find My iPhone, you'll need to enter in your Apple ID and password to activate the device after restoring:
    http://support.apple.com/kb/HT5818
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • How can i unlock my phone when i forgot the password

    How can i unlock my phone if i forgot the password?

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • How do I unlock my phone if I forgot the password?

    How do I unlock my phone if I forgot the password?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • How do i unlock my ipod.  I forgot the password

    how do I unlock my ipod?  i forgot the password

    A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to
             update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Maybe you are looking for

  • Passing data from one bsp application to another

    Hi, I have few queries that most of you would have done in ur projects: 1. I want to pass data from one bsp application to another: eg based upon selected row of table view which populates material no and descriprion to another application which open

  • Method not found when displaying report in viewer CR Basic for VS 2008

    I searched and couldn't find anything regarding this.  When I try to display a report in the CrystalReportViewer, I get the following error message: method not found: 'Void CrystalDecisions.Shared.PageRender.set_ExceptionWindowTitle(System.String)' I

  • Kolletion supported in Dreamweaver CS3?

    Hello, is the latest version of Kolletion supported in Dreamweaver® CS3? If not, will it soon or will it be called something else? What's up with updates, or new versions? Thanks

  • Content Server Backup Procedure

    Dears, We are using Content Server with MaxDB database.As we know in SAP with Oracle database we have brtools to configure backup to take it automatically on a regular basis. So now my issue in the same way we need to configure backup for my Content

  • Regarding ORG Address

    Hi All, I am trying to find out the TABLE name for the Address overview tab in BP transaction.where we will have ORG secondary address.Please can anyone tell me the table name for the same. Regards, VRS.