How to unselect magic wand tool to select another area?

This is so silly but it is driving me nuts. I used to be able to select an area with the Magic Wand tool and then when I was done, click on something else and it would "deselect." But now it doesn't do that anymore. Did I change a setting somehow by accident or did they do an update that changed that? I hate having to do Ctrl D to deselect it when I used to just click on something else.

Thanks for your help. I actually checked on the icons where you mentioned and the one I wanted was the "new selection box" I had "add to selection" checked and so it wouldn't unselect when I went to new area. So your answers helped! Thanks so much.

Similar Messages

Automatic whole object selection with lasso or magic wand tool.

Here I have a circle pattern, all the fills are the same, all have the same appearance,
when I try selecting all the internal scattered objects with the lasso tool, it only partially selects them, its slow getting around their borders while trying not to select the outer ring of objects, using the selection tool on this radial design is difficult, as when you select some pieces you deselect others, I was hoping for an option whereby you could tick a checkbox for the lasso or magic wand tool to "select whole object" when you run the wand or lasso over those objects.At the moment the lasso tool only partially selects based on which nodes you encircled.
I cannot select the outer ring (would be just as difficult with selection tool) and use inverse because there are many other objects on the page also, I could have created the inner circle on another layer initially, but had not, in this situation a small enhancement to the magic wand or lasso would be good for selecting whole objects. When using experimental design approaches we don`t naturally pre plan every step or idea from the beginning.
the other option is to select them all with lasso, the group them, move them then ungroup, but again just looking for the one step opportunity as it seems simple enough.

Agreed. I think an "Grow" and "Grow All" option in the Select menu is the best way to achieve that. (Maybe Adobe can come up with better naming)
"Grow selection" would increase the selection by one anchor point in each direction for each partially selected path.
"Grow All" would select all the anchor points of each partially selected path.
For example, if you have 1 point selected on a circle, "Grow selection" would add the 2 adjacent points to the selection for a total of 3 points. "Grow All" would select all the points on the circle.
Another related feature would be an "Add to selection" option in addition to the "Save selection". And why not a "Substract from selection" option? You'd simply select a few points, choose add or substract and choose which saved selection to modify.
A lot of the selection toold work at the object level, not at the point level, like Deselect/Reselect/Inverse. This can be frustrating.

Flash Professional CC Magic Wand Tool not working

Simple problem. The magic wand tool wont select anything. There is a little "STOP/NO" on the icon though (The circle with a cross through it). Don't know what's wrong.

Not supported? Are you kidding me?!?I
I have a Wacom Intuos5 Touch and use a Wacom mouse with it (in addition to the standard Grip Pen). My problem is worse than the original poster. I have this problem with both my pen and my mouse. The pen is in "pen mode" and the mouse is in "mouse mode," but the problem exists in both modes for both input devices (yes, I tested my mouse in "pen mode," it's not something I'd recommend).
I have no idea what to do about this. I work in 2D film/TV animation, and this renders Flash CC 2014 completely useless to me and my colleagues.
These were "drawn" with a mouse in mouse mode, and a pen in pen mode. The angle and offset of the error seems to depend on the canvas zoom level, but is otherwise random-ish, changing to a random angle, keeping it for a while, then changing it again. I run a multi-monitor setup, and when I move the Flash window from the right-side monitor to the left-side monitor, the direction of the offset flops. It always points up, and toward the center of my two monitors, as if it were a application scaling problem (Windows' DPI settings have been known to cause this kind of problem with some applications, but my setup uses 100% scaling so that shouldn't apply).
I suspected that the angle might have something to do with the rotation angle of my mouse (the Wacom tablet tracks that information), but couldn't get reliable expected behavior when I tested it out.
This whole nonsense reminds me of an error that plagued applications built using the Qt4 framework (such as the VLC video player), which had similar "hit area" problems for Wacom devices (pen and mouse) due to an improperly implemented pen input API (it was fixed in Qt5 by dropping support altogether and treating all input devices as mouse input), but I can't imagine that's what's happening here.
Of course, Flash is registering the initial contact point before flinging it across the screen, so it's a big mystery, and frustrating me to no end.

How to shift selection of magic wand tool by 2 pixels to take the edges off?

Hello,
I'm trying to make a selection with the magic wand tool and shift the selection edges by a pixel or two, but the 'refine edge' button doesn't seem to do anything. I want to cut a pixel off all the outer edge of an image I have cut out of another picture. Any help would be great thank you.

Depending on whether you have selected the image or the background, use Select > Modify > Expand Selection, or Select > Modify > Contract Selection

How to do a magic wand tool like photoshop with java?

in a JPanel,a bufferedImage with a great many colors show in it.
now,i want to select a region with same color use a magic wand tool ,just like photoshop,how to do it?
Thanks.

maybe it is not a feasible way!
i have loading a image size of 150*50,
when i use getPixelColor() method as follow,it used almost 40 seconds to end it.it get correct info of every pixels,but too slow. say nothing of analysis the pixels and catch a selection.
//*******the getPixelColor() method**********//
public String getPixelColor(BufferedImage bimg){
String info=new String();
for(int i=0;i<bimg.getWidth();i++)
for(int j=0;j<bimg.getHeight();j++){
int rgb=bimg.getRGB(i,j);
int red=(rgb>>24)&0xff;
int green=(rgb>>16)&0xff;
int blue=(rgb>>8)&0xff;
info=info+"R:"+red+" G:"+green+" B:"+blue+" X:"+i+" Y:"+j+"\n";
return info;
//****end *****//
then invoke method:
System.out.println(getPixelColor(myimg));

Magic wand tool that will select broken-line shapes?

I'm an illustrator... working in both digital & real artwork.
I work mostly in Photoshop CS, but I have been searching for a solution to a digital problem that I can't quite seem to find using either Photoshop or Illustrator.
What I wish to do is scan a pencil drawing and then create selected shapes in a quick and easy method using a magic wand tool.
But it needs to be a magic wand tool that will select an area drawn from a series of broken lines. Photoshop will only select shapes that are 100% intact, so I wind up having to spend lots of time searching to repair broken lines before Photoshop selects just that one area.
I KNOW that such a program exists... because I recall there used to be such a program. It was a free dowloaded program that I got once, way back around 1998. I think it came from Australia... and it was a basic digital paint program of some sort. I can't recall the name.
It allowed one to quickly click and select an area from within a shape drawn with broken line segments...
Does anyone know of any program (hopefully for Mac) that allow this sort of selection?
This would save me hours of frustration. I can't believe Adobe hasn't come up with something like this already.
Thanks...
John Nez
www.johnnez.com

Gerno
I doubt that I will get to trying the proposed method on that sample image this weekend. I can make a few quick comments, however.
Like numerous Photoshop tools, the success of Illustrator tools like Live Trace and Live Paint are very image dependent and some experience helps. Here are some comment on the three steps needed.
First, the Live Trace step must be done well. There are a boat load of parameters for this process. For the subject image my guess would be to start with a preset and the one I would choose would be comic art.
Secondly, once you make a live paint group you have to have automatic gap detection checked (turned on) and you choice of predefined or custom gap sizes specified. You will then see where the gaps are automatically found and fixed and the gap options dialog box will tell you how many have been found. If you like what you see you can just start painting. Usually, however it is an iterative process of painting some of the areas and then resetting the gap detection and painting again. At any point you can automatically close the paths (but you cannot go back), change the settings to auto detect even larger gaps and try again.
Third is the manual phase. If lucky you will have none of this. On the subject image, however, I can see that some of this is required. To preserve the artistic content of the original one draws a line in the very big gaps having no stroke or fill (invisible line)and then you use the live paint bucket. While the above sounds like a lot of work, it can go very quickly with many drawings.
JN
>That's why I think Adobe ought to work on designing a 'smart magic wand tool'... that could select imperfectly closed shapes.
The Live Paint tool in Illustrator does this. It automatically detects gaps and lets you paint as if they were not there.
Paulo

How do I make a brush signature when the tool bar is missing the magic wand tool?

I am missing the magic wand tool from the tool bar on the left of cc. How do I retrieve it or is it completely missing from the photoshop cc download? I need it to make a brush signature for signing photos.

Hi,
Most likely the magic wand tool is not missing.
The Magic Wand Tool is grouped with the Quick Selection Tool in the tool box
more info on where the tools are and how to access them
https://helpx.adobe.com/photoshop/using/tools.html
https://helpx.adobe.com/photoshop/using/using-tools.html

Cannot find the Quick Selection Tool (previously paired with the magic wand tool) on Illustrator CC (newest version installed on October 14, 2014)

I have just installed a new version of Illustrator CC and CS6 on October 14, 2014 and I couldn't find the Quick Selection Tool on this version, previously this tool is located with the magic wand tool

I don't remember a quick selection tool in Illustrator. Are you sure this was in Illustrator?

Coloring issues with magic wand tool and paint bucket tool, leaves uncolored areas near drawn lines

Photoshop CS6 doesn't color properly. Whetever I use brush tool or elliptical marquee tool to do the lines (with brush tool I use Hard Round, not soft), it doesn't color the whole area when i fill them with color. This happens with both magic wand tool AND paint bucket tool, there is always a small uncolored area near the lines. I have tolerance on 30, and anti-alias, contiguous and sample all layers boxes checked. (this setting worked on my old CS3) I have tried tolerance from 0 to 100, no difference. I have also tried unchecking the boxes I just mentioned, still no difference. I hope there is a solution for this, because it is tedious to always go to the Select - Modify - Expand every time I need to color some area. So how do I fix this problem? I use seperate layers for lines and colors, like I have always done with other Photoshop versions. Even in school where they have CS5 those normal settings work.

Hello Chris,
I don't think this is a "user error". I think Adobe should be able to program a state of the art paint bucket, which is capable to get this done right.
Other applications are able to get this done right.
Please don't fall into a programmer's ignorance ("this is done right by definition") but listen to us artists and improve this unintuitive behavior. Add something like "ignore transparent pixels", because this doesn't even work if you draw on an empty layer.
Thank you!

Is there a magic wand tool in photoshop CC 2014?

Is there a magic wand tool in photoshop CC 2014? I am looking for a complete method of removing a white background transparent.

Are you familiar with how Photoshop groups tools in the toolbar?
If you hover your mouse over any tool with a tiny black arrow in the bottom RHS of the button - then left-click and hold - the buttons grouped (not visible) under that button will appear in a dropdown menu.
Hover over the Quick Selection tool, left click and hold and you'll see that you can then select the Magic Wand tool

Content-aware-fill and magic-wand-tool

Hello! I use the content-aware-fill to remove some text from a photo. To do so, I use the "Polygonal Lasso Tool", select the text with a generous border and click edit -> fill -> content-aware-fill.
This works fine, but selecting a text with the lasso-tool is very much work. So I tried to use the magic-wand-tool - some clicks and the text is selected, very fast and fine. No applying the content-aware-fill - the text vanishes somehow, but the borders of the text are still visible. I guess you really have to select the text AND some background around it to make content-aware-fill work. But isn't there a way to do this with the magic-wand-tool? Increasing the tolerance didn't work, I would need something like "magic-wand-tool and increase the selected area +20 pixels in all directions".
What procedure do you suggest?

Are you trying to remove a watermark that says something like "Proof" or "Copyright"? If so, you won't get much help here. The best advice in that case is to actually pay for the photo. It's surprising how many people ask for help doing illegal things.
Please confirm you are not trying to defeat someone's copyright (e.g., post a small part of the image), and I'm sure you'll get more help.
-Noel

What is wrong with my magic wand tool?

I just started loading up photoshop to crop a picture and my magic wand tool has gone all funny. i don't know why but instead of cropping all the white back ground it does this http://imgur.com/oDTxXyK
someone please help me!

Look at the tool options. You set the tolerance to 200, so it's going to select just about everything...
Also, "crop" is not the right word there. I think you meant "select".

Photoshop CS 5 - Magic Wand Tool Problem

When I use the magic wand in Photoshop CS5, it selects the entire image, not just the section I'm hovering over. I'm working in a Windows environment.
Any suggestions?

Try resetting the magic wand tool by right clicking on the magic wand icon in the tool options bar and choosing reset tool.
Also check what the sample size is set for the eyedropper tool (that effects the magic wand)
You probably want one of the first three settings.

Use wand tool to select dust

Hi,
I'm working on set of scanned text documents. We do not seek option to do OCR, but just want to remove some dust and noise pixels that came along.
Since it is on a white background, selection of it with magic wand tool and inversion returns actual content (text). Also some noise and dust pixels between the rows for example are selected as well. Since size of smallest simbol is already above 20x20 pixels, is there a way to limit selection of elements so that, for example, only what is already smaller than 10x10 get selected (and eventually cleared)?
Played with feather and other advanced selection tools but no solution for now.

Hi there,
I recently created a quick tutorial for using the Clone Stamp tool that tman just recommended. This thread deals with removing text from an image, but you can use the same technique to remove the dust and noise pixels that you mentioned.
Please let me know if you need more specialized instructions.
http://forums.adobe.com/message/4991459#4991459

Drag & Drop and Magic Wand and Any Selection Bug...

Helllo,
I am experiencing a continuous bug in Photoshop CC 2014.
First I'm on a Mac G5 using OSX version 10.8.5.
The bug I am experiencing is not allowing me to select anything using the Magic Wand tool or even the Arrow Selector in any layer if I drag and drop an image from the web to Photoshop.
I have to physically click on the Mac's main background window outside of Photoshop and then click back to Photoshop to get it to work.
Thanks,
JW

I am guessing you are using an ImageIcon to put the image into the JLabel. I would suggest creating your own version of "ImageIcon". In the interface Icon, the paintIcon method gives you access to the component which is your JLabel. You can get the size of this and draw the image to fit the components size. getIconHeight/Width() should work ok if you just return the initial size that you want the icon to be.
Another option is to extend JPanel and override its paint method. This would give you direct acces to paint whatever you want, and you can resize your image accordingly when the size changes.
As far as the flashing goes, you might want to post code (use [ code ] [ / code] tags). There might be something there that someone will see.

How to unselect magic wand tool to select another area?

Similar Messages

Maybe you are looking for