How to unshare /Network/Servers/users-computer.local ?

Hi
are there any security issues on /Network/Servers/users-computer.local ?
Everytime I delete it :sudo rm -rf /Network/* removes the shared stuff.
But when I log back in I see /Network/Servers/users-computer.local is there again.
Are who can access my users-computer.local? is it shared via network?
How do i delete it permanently?
thanks
Kilopopo

You can't. Your single machine is on its own Network, with you as the local user. What you're seeing is normal behavior. There's nothing to worry about.

Similar Messages

  • How to rid of "c://users/appdata/local/conduit/background/container/backgroundcontainer.dll "

    hello
    I was wondering if anyone knew how to get rid of  the following that appears each time I start up my computer  ? (win 7) :
          "c://users/appdata/local/conduit/background/container/backgroundcontainer.dll  "
    thanks for the help
    cafe555

    Hi,
    Any update here?
    Did the message occur like this:
    Run DLL
    There was a problem starting
    c:\users\ed\appData\local\conduit\background container\background container.dll
    If so, please check if the below thread could help here:
    Run DLL error message/background container.dll
    http://answers.microsoft.com/en-us/protect/forum/protect_scanner-protect_scanning/run-dll-error-messagebackground-containerdll/49612202-667e-4a71-8e9a-d02161d8bc19
    Hope this might help
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Stuck in darwin/bsd users-computer,local (console)

    *when starting up it loads to darwin. how do i get out????*
    *it appears disc 1 not mounted udf*
    *host name changed local host to users-computer*
    *logging disabled login window 181 halting*
    *it had been working just fine, but i was trying to mount something i guess*
    *this is a used computer and I do not have any discs.*
    *can anyone please help me*

    pamella:
    Your surest bet is to make sure that you have an up-to-date backup of your stuff and then do an Archive and Install. If you don't have a backup and since you can't log in, you can use Firewire Target Disk Mode with the assistance of a second firewire Mac to see if you can rescue your data.
    cornelius

  • How to write file in user's local desktop

    Hi,
    Using the WriteFile action, i can write the file in inetpub/wwwroot in server.
    Is there any way to write the file in user's local drive folder?
    Although now i am writing the file to server and allowing the user to access it through URL but I suspect that there could be user concurrent issue or file contamination issue.
    Constraint - The file should open with the default name.
    If i try to open a local copy to the user (thru SaveasCSV() or URL)  and allow the user to save the copy then the default name appear as Illumniator.
    Regards,
    Anil

    I think your current approach of saving to the web location and providing the user access via URL is the best approach.  From a security standpoint I can't see that writing directly to a user's desktop/laptop would be a good idea.
    If you are worried about naming or concurrency issues, then create sub folders that match their user name, or devise a naming convention that allows the objects to be unique between users and purpose.

  • How to connect to ichat users in local net using windows?

    Hey there,
    we have a network of mac users here and a few windows user that would like to join ichat. is there any free app that can connect them with the other ichat users?

    Hi Borys,
    Thanks for the info. My goal here is to connect multiple admin severs with different port no's as input parameters and add the users and groups in one shot.
    Here is my working WLST script for a single domain. Any further input is greatly appreciated.
    from java.io import File
    from java.io import FileInputStream
    from java.util import Properties
    import sys
    import commands
    adminT3 = 't3:hostname:portno'
    adminUserName = '*******'
    adminPassword = '*******'
    localUser = 'abacus'
    localPassword = 'abacus123'
    roles = "Deployers,Monitors,Administrators"
    connect(userConfigFile=adminUserName,userKeyFile=adminPassword,url=adminT3)
    serverConfig()
    print "Creating a User ..."
    atnr=cmo.getSecurityConfiguration().getDefaultRealm().lookupAuthenticationProvider("DefaultAuthenticator")
    atnr.createUser(localUser,localPassword,'Local User')
    print "Created local user successfully"
    for role in roles.split(","):
            print "Adding %s to %s group" %(localUser,role)
            atnr=cmo.getSecurityConfiguration().getDefaultRealm().lookupAuthenticationProvider("DefaultAuthenticator")
            atnr.addMemberToGroup(role,localUser)
            print "Done adding a local user"

  • How to Reset Password of User while not connected to Domain using Local Admin Account

    How to Reset Password of User while not connected to the Domain using Local Admin Account
    (I have the use of a local admin account), and I want to help a user reset their password who has logged in the PC and had their credentials cached, but forgot this password. 
    In Local Admin Account :
    When I go to Control Panel, users, users, manager user ; I cannot see any users in this window except the local admin account, and, so I cannot reset a user password this way.
    When I go to lusrmgr.msc, then users ; the local admin account will display only. 
    If I go to command prompt and type "net user", this will not display any users who have logged in to the computer, and so I cannot use "net user" to reset a password.
    I don't want to use any disks, 3rd party programs, or create a VPN connection to the domain.  I just want to help a user who calls in and forgets their password.

    Hello Keith,
    I know this is an old thread but I'm trying to better understand how I could change the domain password while not on the network. What I'm getting from your post is that you:
    1. Create a local user account (not a domain user)
    2. Login with that local user account
    3. Connect to the VPN while logged in as a local user
    4. Log out of the local account and login with the domain credentials
    Now, my question is based on the assumption that the password created on the local account is the same password that one will use to login to the domain account? Also, is the local user account the same as the domain account?
    Thanking you in advance!

  • How do I locate 5/20/2011 1:05:09 AM Packed: Swf2Swc C:\Documents and Settings\User\AppData\Local\Mozilla\Firefox\Profiles\3xe4911x.default\Cache\F\0D\C12DFd01 and what does it mean?

    I am just wondering how I can locate this ~5/20/2011 1:05:09 AM Packed: Swf2Swc C:\Documents and Settings\User\AppData\Local\Mozilla\Firefox\Profiles\3xe4911x.default\Cache\F\0D\C12DFd01~ what is it and what are profiles...on mozilla I have someone remotly doing things to my computer I didn't sign up for,

    1. This is where your main Profile folder is located:
    C:\Documents and Settings\myname\'''Application Data'''\Mozilla\Firefox\Profiles\xxxxxxxx.default
    2. Secondary location:
    C:\Documents and Settings\myname\'''Local Settings\Application Data'''\Mozilla\Firefox\Profiles\xxxxxxxx.default
    No, don't delete that folder or the files in it. Those files would be re-created the next time you open Firefox. Those files are necessary.
    3. Firefox put that file there, so it knows its' there. Delete it and Firefox will download that data all over again, and put it back in that folder.
    4. Bookmarks are stored in the '''places.sqlite''' file in the main Profile folder, since the Firefox 3 versions.
    Some of those files have been moved around from one major version of Firefox to the next to improve various aspects of "performance" and also to minimize file size for automated personal data backup purposes & for roaming Profiles in a large network setting. The urlclassifier file can get to be quite large, which could really screw-up roaming Profiles on a network server.

  • How to add first log on user to local administrator group

    Hi All,
    When first time user log in to system, i need to add that particular user to local administrator group?
    How to achieve it using vbscript?
    Thanks
    Divakar

    It is also now against federal law in the US, Canada and, I believe, the UK. 
    In the US HIPAA and the federal network security act (???) and Sarbanes-Oxley all prohibit users running as Admins.   This may not specifically affect your
    installation but it does show how important this is.
    There is NEVER a good reason to make a user an administrator.  It is only lack of technical know how that leads to this scenario.  Any vendor product that
    requires this is not a safe product to use in a corporate network.  Malware specifically looks for this as an attack vector.
    I spent three years arguing with Inuit to get there software to work.  Every time they said you have to run as an admin I told them it would never be.  We
    were always able to find a way.  Now QuickBooks installs as a standard user with no issues.
    It can be done.
    ¯\_(ツ)_/¯
    It is also now against federal law in the US, Canada and, I believe, the UK. 
    In the US HIPAA and the federal network security act (???) and Sarbanes-Oxley all prohibit users running as Admins.   This may not specifically affect your
    installation but it does show how important this is.
    There is NEVER a good reason to make a user an administrator.  It is only lack of technical know how that leads to this scenario.  Any vendor product that
    requires this is not a safe product to use in a corporate network.  Malware specifically looks for this as an attack vector.
    I spent three years arguing with Inuit to get there software to work.  Every time they said you have to run as an admin I told them it would never be.  We
    were always able to find a way.  Now QuickBooks installs as a standard user with no issues.
    It can be done.
    ¯\_(ツ)_/¯

  • How do you run mpd without a local network?

    I dont have internet/networked comp. at home anymore, but i would like to run an mpd demon.
    Ive been searchin aroudn for a while on how to do it but with no luck.
    Can anyone explain how to do this?

    well, even if you don't have an ethernet card, there is still a "network" ... basically, there's a network address for the local computer.
    you must've removed the network daemon. put it back in, and set up your rc.conf interfaces=(lo)
    lo means loopback, so the kernel makes a fake ethernet card that only sees your computer. that way anything that's trying to access the network address 127.0.0.1 or localhost will still work.
    you would have a lot of gnome issues without this too, but i guess you're one of us folks that don't like huge desktop environments

  • HT202213 Our house has a computer, 3 ipods, 2 iPhones, 2 iPad Mini's and 1 family iPad = 9 devices.  I one have one Apple account currently.  How do I move exisitng users under my account to their own Apple account

    Our house has a computer, 3 ipods, 2 iPhones, 2 iPad Mini's and 1 family iPad = 9 devices.  I one have one Apple account currently.  How do I move exisitng users under my account to their own Apple account

    Have a look here...
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • How can I allow a user (client) to choose a local image file (on his hard d

    How can I allow a user (client) to choose a local image file (on his hard drive) and modify it using an applet from his browser ? I am trying to develop a web page that enables the user to choose an Image file, manipulate the image using a java applet, and display the results.
    Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. On the other hand, I can choose and upload any file using a JavaScript form:
    <FORM METHOD="POST" ENCTYPE="multipart/form-data" ACTION="process.asp">
    <INPUT TYPE=FILE NAME="file1"><BR>
    �
    It seems that I can choose an image file with a Java script form and process an image with an applet. How can I choose a file AND process it locally ?
    (I do not wish to upload the file to the server using JavaScript form and then back to the client�s applet for processing since it will be a tremendous waste of resources).
    Will appreciate any solution.
    Thanks !
    ( my email is: [email protected] )

    "Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. "
    You can do this if you sign the applet...

  • How I can recover my user admin password of my computer?

    How I can recover my user admin password of my computer?
    I have an I mac 27 Inch 2009 3.06 GHz Intel core 2 Duo. I cant remember my user admin password to enter my computer to make changes, how can I recover it? I have being entering as a guest user.

    You can't recover the password, but you can reset it.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password. In OS X 10.10 and later, this option also works with FileVault, but only if you enabled it when you activated FileVault. It's not retroactive. Otherwise, see below.
    Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.
    Start up in Recovery mode. When the OS X Utilities window appears, select
              Utilities ▹ Terminal
    from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
    In the window that opens, type this:
    resetp
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
    Select the startup volume ("Macintosh HD," unless you gave it a different name) if not already selected. You won't be able to do this if FileVault is active.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
               ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but the Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as the login password), there's no way to recover it.

  • How do I change my user name and password if I can't logon to the computer?

    how do I change my user name and password if I can't logon to the computer?

    What Mac is this with what version of OS X?

  • How to create user in local datasource when UME is already switched to LDAP

    HI,
    Info : I have portal ( NW 700),  recently i switched the datasource of portal to LDAP from local datasource.
    issue: if i create user in portal it get created in LDAP, i want create few users in Local datasource.
    how to create user in local datasource when UME is already switched to LDAP?
    one solution is change the ume back to local datasource > create user > then switch back to LDAP.
    do you know any other sol?
    Regards
    Shridhar Gowda

    Please let me know the Datasource file name .. i.e. the .xml filename.
    try to analyze this name and see whether you get a solution or post it here.
    Reward points if helpful -

  • How Backup and restore BSP application to Local computer

    How Backup and restore BSP application to Local computer.
    How Backup whole Package to a Local file?

    check out this code sample.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3330a5e1-0701-0010-6e81-e88984de611a">Tool to Download Complete BSP Application</a>
    Regards
    Raja
    is the following thread of yours is answered? or do you have more questions.
    htmlb tableview with CSS
    Message was edited by: Durairaj Athavan Raja

Maybe you are looking for