How to update 2G-Nano MANUALLY ?

Hi all,
how am I able to update my 2G-Nano if my notebook (with iTunes 7.02) has no connection to the Internet at all?
I've downloaded iTunes via a separate PC and installed it on my (offline) notebook via USB-stick.
iTunes states that my Nano has got the latest update (which isn't) and I can't update it manually because there is no connect to the Internet. In the past (1G-Nano) it was possible to download the iPod-updates separately and perform the updates manually. What can I do with a 2G-Nano?
Thanks for your support.
Rüdiger
2G-Nano Windows XP

"...so I was asking why you couldn't use that to update the iPod"
Unfortunately not (no iTunes installed).
"It's just that now, the updater is included in iTunes and not as a standalone updater."
That's the point! In the past it was possible to download the iPod- and iTunes-updates separately and perform the updates on a standalone PC - WITHOUT being online.
If now an internet connection is required (mandatory), because updates can only be progressed 'online' I need to install iTunes on my (an) online PC as well. For ME (probably no issue for others) this is less convenient than it was in the past!
Considering that this PC then probably (surely) will not have the same music-library doesn't this then mean, my music (8GB) will get erased when I connect my 2G-Nano to it?
And I have to upload it again when I connect to my 'main' iTunes?
Nevertheless as mentioned before: Here and today I have no problem with my iPod yet and in case I MUST update for whatever reason I will surely find a way to connect to the internet.
I just hoped that it would be as easy as it was in the past with my 1G-Nano and my 1G-Shuffle (iTunes 4-5-6.x).
Thanks for your explanation Jeff!

Similar Messages

Updating iPod nano Manually-How do you do it?

I am trying to update my iPod manually. The instructions say to "Open iTunes and select iPod nano in the Source list", but iPod nano does NOT appear in my Source list. Is this possible and how do I get it to appear, so I can use properly. Thanks

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod shows up in Windows but not in iTunes
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive

How to update PAYMENT tables manually from backend after invoice creation.

Hi,
I am Financial beginner. how to update payment details from invoices using backend in P2P.
Thanks and Regards,
Srikanth

I have created a invoice and updating payment details.
I just need small information regarding payaments.
After invoice we create payments using validate, pay in full.
But What actually happens when we do validate and pay in full.
and what are the fields and tables effected in this process.FAQ: Common Tracing Techniques in Oracle E-Business Applications 11i and R12 [ID 296559.1]
R12 Docs
http://docs.oracle.com/cd/E18727_01/index.htm
eTRM
http://etrm.oracle.com/
Thanks,
Hussein

How to update client profile manually (without APNs)

Currently implementing an OS X Server with a specific goal of device management using the Profile Manager. I have a thorough understanding of APNs roll in this where communication is sent to APNs which then gives the client a notification to "check-in" with the server for updates. So the actual data exchange is only between the server and client. (Like the diagram below...)
However, for security reasons I want to be able to accomplish Client-Server mdm checkin manually without APNs if I want to. In theory, this should be possible because the client obviously runs code to search for the server, communicate, and apply any changes to its configuration profile. Based on the OS X server documentation for this, it does this over SSL to the server for an mdm_checkin. The client also automatically checks the server on each startup, so restarting the machine does in-fact tell it to check the server and gets any profile changes that are holding as tasks. (Obviously, its not ideal to restart every time I want a change...)
Again, for security and troubleshooting purposes, I want to avoid APNs and do this communication manually. I'd also like to avoid downloading from the myDevices portal, or transferring a profile to be double-clicked/opened, etc etc. However, for the life of me I can't find any other documentation or code that may direct me how to do this! It seems like there should be sometime to run or few terminal commands to accomplish this...
Has anyone else attempted this or had success telling a client manually to talk to it's mdm server? (or even using mdmclient?)
Thanks!

Enrolling a device to an MDM e.g. Apple's Profile Manager does not require APNs, it merely requires 'installing' the enrolment profile and optionally a trust profile. However normally if you make a change to a profile this would be 'pushed' to client devices by sending an APN message to tell the client to 'phone home' to download the new profile.
I install the trust and enrolment profiles during a DeployStudio imaging workflow and at the moment use APNs to send notification for updates, however for another different network I am looking at the following instead of APNs.
The latest Munki software now supports installing Profiles directly, before it used to be necessary to wrap the profiles inside Apple installer packages.
Note: Profiles can be distributed 'over the air' via APNs, hosted as files to b manually downloaded from a web server, or emailed to users/devices as a file attachment, and as mentioned above wrapped inside an Apple Installer package which would run a post-install script to install the profile.
Therefore you could generate the updated profile and use Munki 2.2 to manage distributing and installing the updated versions. Of course an important limitation is that Munki is for Macs only and does not cover iOS devices. Munki does not use APNs. The Munki client needs to be able to talk to your Munki server which ideally should only be contactable on your LAN, a VPN connection would work.
Note: It is probably not worth looking at Casper Suite even though it supports iOS as it uses APNs.

How to update my Nano to the latest software?

I have a generation 6 Nano. When I just plugged it into my laptop, I got a message asking me to download the latest version of software into it. By the time I logged into my Apple ID, the instructions were gone. Can anyone give me an idea of how to get back to those instructions?

Click here and follow the instructions.
(115144)

How to update Camera Raw manually

can somebody run me through the steps needed to update photoshop and Camera Raw manually.

This should help you. Camera Raw plug-in installer
Gene

How to update HTML template manually

Hi,
I have added a custom field in SHip-To address screen in Shopping cart in BBPSC01 and added a functionality. Found it is working fine in SAP GUI side.
It is not reflecting in URL. But to reflect the same in URL, can anyone let me know what HTML code needs to write in HTML template..as I am new to HTML
Is there any auto update of HTML template.
Thanks,
Rakesh.

Hi
Which SRM version are you using ? What is your business requirement ?
Incase you have made the changes manually, you need to ensure that in SE80 for the Internet Service (- say BBPSC01 ), all the manually modified HTML Templates ( by referring to any SAP OSS Note, or due to some customer requirements etc) are having correct source code as well the HTML are published on all the respective SRM ITS Internet Sites.
Do let me know, incase you face any issues.
Regards
- Atul

When I update my nano ipod I get an error message "User ipod cannot be updated. The disk couldnot be read from or written to." How can I overcome this error message.

In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.

Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling

How to calculatee Dep manually and how to update fixed assets register

Hi Gurus,
I have a issue like Asset vale is Rs. 1000 Dep % is 1st year 35% 2nd year 15%3rd year 15% 4th year35% for 4 years .if buys another asset in addtion to old asset Rs.500 the depreciation is same has earlie said percentage . my clients wants to post this depreciation manually.and how to update fixed assets register.
Regards,
Ssriram.

Hi
Depreciation terms are applicable to the entire asset (not for individual transactions). If you want to have different terms, you may create the additions as Sub-asset (Tcode AS11) to the main asset and enter depreciation terms.
Thanks
Palani

How to update BT Home Hub 3 manually.

This is a tutorial guide on how to upgrade the firmware on the HH3 manually. If your HH3 won't update you can manually update it assuming you have the right files. You go to 192.168.1.254/firmware_upgrade you may also need to login.

Dean235 wrote:
This is a tutorial guide on how to upgrade the firmware on the HH3 manually. If your HH3 won't update you can manually update it assuming you have the right files. You go to 192.168.1.254/firmware_upgrade you may also need to login.
That is a pretty big assumption. Do you have any files for 3b for example?

How to update 2 fields automatically rest manually on page

Hello folks,
I have got a question on how to update 2 fields in a table automatically (in my case this is one field for the user and one field for the correct date and time). This should happen automatically every time an user changes a row in the table. But it seems as if i cant change the fields i tried it with the changing of the textfield but he dont change the values in the database. I even tried a separate update statement but since this is set after the commitchanges() command it seems as if he ignores any following commands.
So anybody a good idea how i can change easily these two data fields? I just cant believe that you must manually change the fields, thats not the use of these 2 fields.
Thanks in advance for your help
Acinonyx

To be exact i have got a page with different fields which get their data from my database. Two fields which contain an userid and the other a date and time value should get updated automatically when the user changes something of the other values on this page and press a button which calls the commitchange method. But since this should happen automatically and not manually i cant put these changes in the database. The manual changes are saved without any problems but the automatical changes not. So my question is how can i change a value programmatically and make him save these canges in the database?
I already tried to put the new values in the fields or even detailed in the database but i cant get him to update these two fields.
Acinonyx

How do I automate the Adobe Reader updates? The manual updates are a hassle.

How do I automate the Adobe Reader updates? The manual updates are a hassle.

My Reader is for a Mac and has only these options:

Nano 6th gen - How to update to 1.1 ?

I just a replacement nano, as my old one suddenly died. Great service, apple. The new nano of course is on 1.0 firmware. When I click update (on mac), I am promted to select a file, help !!! Is there a 1.1. firmware file I can actually download ?
Alex (Germany)

Did you Look at item 3 in How to update iPod for Macintosh
From Here http://support.apple.com/kb/HT1483
If you are using windows... See Item 3 in How to update iPod for Windows

How to update attributes from OIM to AD in case of LDAPSync

Hi All,
In our scenario, we have LDAPSync configured for OIM AD Integration. OIM version is OIM 11gR2 PS1 (11.1.2.1.0.0)
It is working fine and On user creation in OIM ,RealTime user creation under specified container in AD is happening.It is SSL enabled,so password is also getting updated from OIM to AD.
But we have following conflicting scenario --
- As per our requirement we have to generate random password for User in OIM. For that we have PostProcess event handler implemented in OIM.
- We have tested LDAPSync by creating user manually through OIM console. While creating user manually, we have provided value for password attribute along with other attributes.
So, password attribute in AD will get updated for User along with all other attributes values mapped for AD from OIM.
- But, in our scenario random password is generated for User through OIM post process event handler and it will be updated again in user profile of user created manually in OIM. This password is sent to User through mail.
As this password event handler will get triggered after LDAPSnyc only, this password will not be update in AD for manually created user in OIM. So he can log into OIM with this new password but not to AD system.
He will be able to login to AD system with same User ID but with password which was set at time of manual User Creation in OIM and not with the password updated in OIM user profile by PostProcess event handler.
Is it possible to set password for user through PreProcess even handler implementation for Random Password generation. In this case also , the default OIM post process
password generator will override the PreProcess event handler.How to resolve this issue.
Also,when AD connector is in place in OIM environment we would be having change/update tasks for any attribute update to be send from OIM to AD.
How this update scenario will be implemented from OIM to AD in case of LDAPSync ?
Please provide any helpful pointer on this.
Thanks,
RPB

Password :
Increase order of calling for custom password event handler than OOTB handler.
Update:
you wanted to update custom fields?
Did you check default update tasks comes with connector?

My Apps wont update auto or Manually

Does anyone have any ideas on how to fix an issue with the apps not updating automatically and Manually. Automatic is turned on in settings and i'm on IOS 7.1

In one sense you are correct but updating apps individually seems to be less problematic. Have you tried restarting your iPad? Have you tied a Reset? [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

How to update 2G-Nano MANUALLY ?

Similar Messages

Maybe you are looking for