How to update 3G to current version when itunes says already up2date?

I still have and use my original Iphone 3G 16gig phone..  Its slow as a slug going uphill once you start filling the hard drive but anyways,   I tried to download an app in the app store yesterday and it said i needed to update to 4.3.xxx first...   so i thought cool finally an update for this ancient phone..  Connected to itunes and checked for an update and itunes says phone is up to date with version 4.2.1
    Am I missing something?  How can it tell me i need the current version for the app/phone when the phone and itunes say its already up to date? 

wingtip wrote:
Trust me, i do that alllll the time and it only helps a tiny bit...  Its just the full drive... i bet if i restored the phone to a clean slate it would zip again but whats the point..... i put stuff on there for a reason.... 
Have you closed out everything in the Multitasking menu?  You can do that by double clicking the home button and then holding down on the apps until the red circle and then click on that.  Hope this helps.

Similar Messages

  • Patching - How to update the console product version when installing Update Rollup 5

    Hi,
    I just completed a patch to upgrade Service Manager to Update Rollup 5. I updated the data warehouse servers and management servers.
    When looking at installed programs in Windows it shows that Service Manager has the latest version 7.5.3079.315:
    However, when I look in the About Service Manager option in the console it shows a product version of 7.5.3079.0:
    How do I update the console product version so that it shows the 7.5.3079.315 version?

    Hi,
    This behaviour is expected. Unfortunately, Microsoft does not update the About Info screen of the SCSM console. Add remove programs shows version .315, which means the console was also updated.
    Make sure to also update consoles that your users are running on their computers.
    BR,
    Dieter

  • How to update Acrobat to current version in one shot?

    We use Acrobat here at work on several computers, whenever I have to install it on a machine I have to spend hours getting it up to date to the current version because I have to apply each update one at a time.  Is there a cummulative update that would bring any version of Acrobat up to current?
    Thanks

    Admins typically chain them together and use an AIP or Bootstrapper. The details depend on your version as 9.x and 10x are radically different.
    Start with the documentation. Admin guide is here: http://www.adobe.com/go/acrobatitinfo.
    Ben

  • I have iPhone 4 with newest update and Mac laptop with Snow Leopard and current version of iTunes. When I hook the phone up via USB, iPhoto pops open and reads the pictures for import, but iTunes doesn't do anything. Not seeing the device as a USB, either

    Sorry, thought that was the body of the question, so the title is long. When I plug in my iPhone 4 (newest update) into my Mac laptop (current version of iTunes, Snow Leopard), it does not read the music, apps, etc., or open iTunes at all. It syncs the pictures, but it doesn't not show as a USB device, either. I have gone through the Troubleshooting assistant, restarting both comp and laptop, using different USB ports, etc. If it is of note, when I look at the option to Sync through Wifi on the phone, it says that sync will happen when my computer (by name) is "available." Not sure if this is a phone issue or laptop, leaning towards laptop, since iPhoto syncs. Willing to buy Lion if that will fix the problem! I would appreciate any help that is given.
    Regards,
    Lindsey

    cynecasey wrote:
    ... my computer is still running Mac OSX 10.5, because I don't feel the need to buy a new laptop every 2 years.
    You have written a very long story, and I admit I have skipped most of it.  But I think the question is you are on iOS 7, and cannot get the latest version of iTunes (11.1.5) on your computer because your OS X is too old.
    The fact that you chose not to update your hardware does not mean you could not update your software!
    OS X 10.5 is very old (about four years).  iTunes 11.1.5 (current version) requires at least OS X  10.6.8 to run.  Very likely, you could upgrade your computer's software to at least OS X 10.6.8 and then download the current iTunes on it.
    You would start here:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Then you would update the OS X 10.6 to OS X 10.6.8 over the air, then download iTunes (or update to a later OS X, as the current version is 10.9.2).

  • I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod.  This is the first time trying to backup.

    I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod.  This is the first time trying to backup the iPod. I have authorized my computer.  Still no luck.

    Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
    Also
    - Reboot the computer
    - Try another cable
    - Try another USB port

  • I recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

    recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

    Check this thread out -> iTunes 10.4 & Multimedia Keyboard
    It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
    pikot wrote:
    Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
    - You need to open a text editor (like notepad) as an administrator.
    - Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
    - Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
    iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
    - Save the file
    - Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me)

  • I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

    I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

    Mike
    I have done that and it is through pressing that update, which tells me that there is anew version of iphone software, that the prompt comes telling me that this is the current itunes?

  • HT201812 why did my playlists erease when i downloaded current version of itunes

    when I downloaded current version of itunes all playlist did not transfer?

    Simply downloading won't erase anything.  Did you install too?  If you installed too then normally it also should not affect the library but sometimes for strange reasons it does which is why you need to do a computer backup before installing any updates of any kind.  Do you have a backup?
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451

  • Software Update keeps asking me to install the existing, current version of iTunes

    Well, I thought this would go away - maybe - when I just updated to iTunes 11.3.  But, it didn't.  I uninstalled iTunes and all associated programs in the order recommended by one posting, rebooted, installed the current iTunes 11.3.  But, when I run the Software Update, it still tells me I need to update to 11.3 (now - it used to say 11.2, etc.).  I've had this problem for some time.  I have three machines in the house with iTunes on each - all are basically identical installs - all done at the same time, and this one machine is the only one that can't recognize that it already has the current version of iTunes and keeps popping up wanting me to install it all over again - which I've done by following the prompt, and then it immediately checks to see if new updates are required and tells me - again - that I need to update to the current version - which, of course, is already installed.  How do I get out of this loop?  Help????

    Hi bweech,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with the update to iTunes 11.3.  I understand you have tried some of these steps, but I would recommend going through them as outlined in this article again.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    I hope this information helps ....
    - Judy

  • I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

    I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

    I am so sorry I am frustrating you. This is the first time I have used this community and am leanring as I go. I am not able to see the entire post that you leave, unless I look at it on my phone (email)--I am so sorry. You have no idea how much i appreciate your help. Yes, I see that I can get the later version of OS software, but its not availabe for immediate download. My only options appear to be having it shipped, or going to the store to purchase. And if you know of another way that I can access all of my itunes library music on my new phone withouth using itunes, I would love to hear about it.--thanks and again i am so sorry for frustrating you.

  • When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

    I am in the same boat. I tried repeatedly to contact iTunes support, but was told each time that I had contacted the wrong deaprtment and they could not help me. There must be a way to still be able to use the iTunes store without paying for a system update. If not, I hope they will reimburse me the money I have in my acount.

  • When I want to get an app, an error message comes up saying I need 3.0 software update.  How do I get my ipod updated in itunes, when itunes says my ipod is already updated?

    When I want to get an app, an error message comes up saying I need 3.0 software update.  How do I get my ipod updated in itunes, when itunes says my ipod is already updated?
    OR if I cannot update to software 3.0, how can I find apps that will work just for my ipod touch?

    It sounds like you have a 1G iPod Touch, in which case you can only upgrade to iOS version 3.1.  Here is a link to purchase the update.
    http://support.apple.com/kb/HT2052
    B-rock

  • HT1491 Just updated to the newest version of iTunes, is asking me to update to the newest version of ios; however, it says that I have purchased music that needs to sync or it will be lost during the upgrade, how do I do this!?

    Just updated to the newest version of iTunes, when connecting it prompts me to update my iPhone to the newest version of IOS; however, when I hit download it says I have purchases that need to sync but where and how do I do this on the newest version? It isn't doing it automatically and I am unable to find the sync button that was available on previous versions of iTunes. I would hate to think that I'm going to lose the many purchases that I've made, someone please help!

    File>Transfer Purchases

  • How do I fix my Iphone if I have already updated to the latest version of itunes but it says there is an error and cant be restored?

    My Iphone 4 crahsed a few months ago when I tried to update and i have used Itunes already and it updated to the latest version of itunes but it says there is an erro and cannot be restored, I'm not sure why it is saying that, can I get some help?

    Hi Alyssa_fagundes,
    Thanks for the question. Based on what you stated, it seems like you need help restoring an iOS device. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • HT1925 Currently have iTunes 11.0.1.12 - how do I restore a previous version of iTunes that was far easier to use (much more familiar with)?

    Currently have iTunes 11.0.1.12 - how do I restore a previous version of iTunes that was far easier to use (much more familiar with)?

    Apple is starting to feel like work and not play.

Maybe you are looking for

  • Job getting cancelled in SM37

    Dear All, I have scheduled a job to run using "JOB_OPEN" " JOB-CLOSE" and submit statements. When i checked the status of the job in job-log, its in cancelled status, with an error "Internal session terminated with a runtime error (refer to ST22)". T

  • My volume buttons won't work on my 2011 macbook pro 13.

    The sound preferences says there is no sound output controls. I have sound but have to change the volume through system preferences. When I plug in headphones it restores the controls. What could be my problem? I have recently installed a driver for

  • Hidden tag in a jsp

    I would like to give a hidden tag a value. The value i need to give the hidden tag is from the previous jsp's hidden tag. how do i do this thank you.

  • NPE after migration of html from 11.1.1 to 11.1.1.1

    After migrating a working simple html project to the newest version 11.1.1.1 I've got the following error. Does someone know a solution? Thanks Ognian Performing action Run[ from oracle.ide.navigator.ProjectNavigatorWindow ] Performing action Externa

  • Cannot load certain websites, cannot find fix

    I've noticed I cannot load 2 specific websites through Firefox: www.bankofinternet.com and www.quiksilver.com these sites will not load in any other browser on my computer as well. I've tried loading the pages directly & through google search. I've t