How to update a dbf file with gui_upload???

hi friends,
i would like to know how to update a dbf file with gui_upload???
as i hve already know that it's easy to convert dbf to tab formatted text fle and thn upload it.but i want the direct uploading way.i don't let my user's bsy with converting existing dbf to txt.so pls help me asap!!!!!i will be thankful to you!!!!!

its very easy you can search other forum!!!

Similar Messages

I just want to see my files with explorer. Then transfer all pics to my computer. With the new update I can't.   How do I access my file with just explorer?

I just want to see my files with explorer. Then transfer all pics to my computer. With the new update I can't.   How do I access my file with just explorer?

    Let's bring back your file control, jpandwibble. What happens when you connect to your computer? Are you trying to use Explorer on the device or on computer? I am eager to continue troubleshooting!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

How to update cgicmd.dat file during runtime?

I'd like to know how do update cgicmd.dat file during runtime. For example, I run a report one.jsp as
http://<machine>:<port>/reports/rwservlet?one.jsp&USERID=uid/pwd@db&DESTYPE=cache&mode=bitmap&desformat=htmlcss
within this report there is a hyperlink to open another report named two.jsp.
before creating this hyperlink, I'd like to update cgicmd.dat file with passed in userID, pwd, and connection, so two.jsp can use this key for userinfo
so I can create hyperlink as follows
srw.set_hyperlink('/reports/rwservlet?report=two.jsp'||
'&cmdkey=userinfo&DESTYPE=cache&mode=bitmap&desformat=htmlcss');
Thanks

To my knowledge the cgicmd.dat is only read when the OC4J starts, so you would have to come up with another solution. Using Single-Sign-On (SSO) is quite a good idea, and it's there for cases like this.
Regards,
Martin Malmstrom

How to create a csv file with NCS attributes?

Hi
i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
How to create a csv file with all required attributes?
This is part of NCS online help talking about this topic:
Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
Note The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
Bellow is test csv file i created but does not work:
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
The error i am getting while importing this file:
Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
Assistance appreciated.

It looks like the IP address field is incorrectly set.,
It should be as follows
{Device IP},{Device Subnet Mask}, etc etc
so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
below is a link to the documentation
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
HTH
Darren

How can I associat ".swf" files with flashlite 2.1

How can I associate ".swf" files with flashlite 2.1? When I
install flash lite 2.0,it can do ---- click .swf files system can
autoly use flashlite to play.But now I install flashlite 2.1,it
lost this ability return as "unknow files formate".
Now,how can I reassociate ".swf" with flashlite 2.1?
first: I must use flashlite 2.1.
second:I must click .swf file directly.
I know another way to open :open the player and then find the
.swf,and open it. But ,unfortunately,I can not use this way to
open.Now I will be looking for another way.

unfortunately, the 2.1 developer edition you have installed
has not overwritten the original version integrated into the
symbian OS by the manufacturer. This means that the only way to
open the 2.1 files is to open the 2.1 player from your apps menuu,
and click on the swf file. You will only get direct access if the
updated player is in a firmware update for you handset.
Matt
http://www.outside-media.co.uk/blog

Create the dbf file with java, but cannot display the data with VF

Dear all,
i create a dbf file with some java packages, this file can be opened and display all of the data with excel, but just can show the data structure and no any data when i open it with VF, how to solve it?

Hi, I have got same problem as you. My application generates a DBF file from a resultset. In MS Excel it looks pretty good - all data, but when I try to open same DBF file with Fox or MS Access, I always see ONLY header(column names), but NO data! I don't know why?! The application generates this file using JDBF classes (version 1.0). I guess, maybe it is caused by the size of this file. The DBF file had 18 columns and over 32000 rows.
Did you find the cause? I'll be grateful for help.

How to associate an uploaded file with form data

I have a "ticketing" app which stores a ticket no. as well as allows users to upload multiple files per ticket. The problem I am having is how to associate an uploaded file with a particular ticket no. As you can guess this becomes complicated when the same user can potentially update multiple tickets using the same file names. I am having difficulty trying to understand how to associate a ticket no with one or more uploaded files. I do have a custom table which I update with the attachments but I am unsure how to, or when to, update the ticket information on this custom table. I only want to retrieve attachments for a given ticket, not all attachments uploaded by a user.Does anyone have any ideas?

Hi,
My question is bit related to this topic.
I am having a requirement to upload the CSV files so that they will store in a database table and later on wards when they search on that table it needs to pull the information and display on the form. I am a new bee to application express. Could some body tell me how to start this process with??. Just give me an overvoew/hints so that I will try to carry on my own.
Cheers,
Krishna.

How to load unicode data files with fixed records lengths?

Hi!
To load unicode data files with fixed records lengths (in terms of charachters and not of bytes!) using SQL*Loader manually, I found two ways:
Alternative 1: one record per row
SQL*Loader control file example (without POSITION, since POSITION always refers to bytes!)<br>
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode.dat
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001111112234444
01NormalDExZWEI
02ÄÜÖßêÊûÛxöööö
03ÄÜÖßêÊûÛxöööö
04üüüüüüÖÄxµôÔµ Alternative2: variable length records
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode_var.dat "VAR 4"
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001501NormalDExZWEI002702ÄÜÖßêÊûÛxöööö002604üuüüüüÖÄxµôÔµ Problems
Implementing these two alternatives in OWB, I encounter the following problems:
* How to specify LENGTH SEMANTICS CHAR?
* How to suppress the POSITION definition?
* How to define a flat file with variable length and how to specify the number of bytes containing the length definition?
Or is there another way that can be implemented using OWB?
Any help is appreciated!
Thanks,
Carsten.

Hi Carsten
If you need to support the LENGTH SEMANTICS CHAR clause in an external table then one option is to use the unbound external table and capture the access parameters manually. To create an unbound external table you can skip the selection of a base file in the external table wizard. Then when the external table is edited you will get an Access Parameters tab where you can define the parameters. In 11gR2 the File to Oracle external table can also add this clause via an option.
Cheers
David

How can I print a file with mixed page orientation in windows 8.1?

I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc

ส่งจาก จดหมายของ Windows
จาก: Pat Willener
ส่งเมื่อ: จ. 5 มกราคม 2558 6:15
ถึง: thang dinhvan
How can I print a file with mixed page orientation in windows 8.1?
reply from Pat Willener in Adobe Reader Touch for Windows 8 - View the full discussion
I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7064031#7064031 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7064031#7064031
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Reader Touch for Windows 8 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How to update my ibook G4 with out itunes

how to update my ibook G4 with out itunes

Your question begs more questions before an answer...
What are you trying to upgrade, and why would you try to use iTunes
in a vintage G4 computer that cannot run an OS X later than 10.5.8
at best? (and only if it has a processor at least 867MHz or better)
With at least a 1.0GHz iBook G4 you could run Leopard 10.5.8, and
the system requires a retail DVD to install the 10.5, then go online
after installation, to get the Combo 10.5.8 update, by use of Software
Update within that first earlier system...
If the computer does not have at least the minimum processor, it would
not be able to see Leopard as a system, so Tiger 10.4.11 is the last...
http://www.apple.com/support/leopard/
iTunes does not upgrade or update much of anything in an obsolete &/
or vintage Mac OS X before the Intel-Mac era, and prior to OS X 10.6.8.
If your computer does not have an iTunes version at all, you can go to
Apple support downloads and look at older iTunes, and older safari,
and some other bits that are limited to their respective vintage OS X.
Usually the upgrade path utilizes DVD media or CD media, for software
& depending on what kind of software, then later get update-downloads.
To see if there may be anything not already installed in the system or
applications that could exist in the Apple support download servers,
you could see if the System's own Software Update, located in Apple
Menu in upper left side of the menu bar in Finder, can locate some.
If you perform a new install and did not save all the bits as downloaded
from when they were more current, some updates to original media that
formerly were online and available as download (step updates, not full
upgrades) you may eventually be unable to upgrade then update an older
OS X system; the remainder of the later or last fixes were in the update.
So, if you have an old G4 PowerPC Mac computer running, say Tiger 10.4.3
and thought to use some software intended to run in Tiger 10.4.11, then
you'd have to see if Software Update could find the 10.4.11 Combo update.
After updating the main system, other applications may also see a need to
be updated, if they were not already as far as they could go, in their vintage.
iPhoto, and other applications, such as they were, had updates to their main
application. So with iTunes, the last version that can work in a PPC G4/G5
non-intel would be in the last supported OS X, Leopard 10.5.8, and that
version number is iTunes 10.6.3; so you can't visit an App Store or Mac App
Store nor can you run Snow Leopard on a PowerPC architecture Mac.
With the intel-based Mac, and Snow Leopard, you can access the online
Stores to include recent Mac Apps, App Store, iTunes Store, etc. A light
version of early iTunes (see iTunes Player) can be seen, and their Radio
still plays free music channels. I have several older pre-Intel Macs...
The matter involves the vintage of the device, the system, and limits of the
old vintage/obsoleted configurations where both are interdependent.
Not sure if this helps, but more of a history lesson may be read if you look
into everymac.com and compare models, build years, and other specs...
If you need some feature or function not supported by vintage hardware or
vintage software, or a newer web browser, you have to look further. A fair
browser can be found in TenFourFox. I use it daily in a PPC G4 MINI 1.5GHz.
with Leopard 10.5.8. Plus others. To go further, look into an Intel-based Mac
such as MacBook2.1 & then buy the Snow Leopard retail DVD for about $20.
Hopefully this helps somewhat...
Good luck & happy computing!

There is no 'Save as' under the file menu. How do I save a file with another name?

Numbers help refers to the 'Save As' function in the File menu. My version (latest) does not have a 'Save As' function. How do I save a file with another name?

Ross Millard wrote:
Badunit. You have an original file and an edited file. Now you duplicate the edited file and save it with a different name. Now do you have to go and delete the changed file from which the duplicate had been made? And.... is the original still unchaned... still original?
Ross,
For the situation you describe, Apple has provided Duplicate and Revert. Use File > Duplicate to reach this menu:
Regards,
Jerry

How to create a pdf file with CS5

Hello, I'm new to PhotoShop CS5 and haven't figured out yet (despite two hours of trying) how to create a pdf file with pictures and texts. Can someone please help me with this ? The "help" button in CS5 doesn't seem to cover this question. Nor do the FAQs.
Thank you very much.

Save As... Photoshop PDF.

How to update adobe flash player with os10.6.8

how to update adobe flash player with os10.6.8

You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US which also covers ‘blocked plug-in’.

How to fix the .pdf file with error "invalid annotation object"

how to fix the .pdf file with error "invalid annotation object"

As long as the PDF opens, then just try saving it to a new file name. There may be a preflight script that would help troubleshoot the issue.

How to convert a pdf file with hand-written signature?

How to convert a pdf file with hand-written signature?

Hi Lotus1215,
Once the document is signed we cannot edit that document, hence convertion is not possible
Please see the article mentioned below
http://forums.adobe.com/docs/DOC-1515
Let me know if you have any other question.
Regards,
~Pranav

How to update a dbf file with gui_upload???

Similar Messages

Maybe you are looking for