How to update a device package in LMS 4.1

I am adding SUP 2 T's into the network and need to have LMS monitoring them. I have not yet been able to figure out where to upgrade the device package so that I can add the SUP 2 T's

Yeah, for Inventory Config And Image Management (the traditional RME functions, in LMS 3.x lingo), you have to perform a separate "Software Update" (vis-a-vis Device Update, which is apparently for CiscoView). That's described in the same aforementioned URL, a little further up, Admin -> System -> Software Center -> Software Update:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/user/guide/admin/swcenter.html#wp1096852
The following page describes, in not-so-clear terms, whether it's Software Update or Device Update that's needed to get newer hw/sw recognized by the various pieces of LMS 4.1.
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html

Similar Messages

Device packages for LMS 3.2

Hello,
Can someone point me in the right direction to download device packages for LMS 3.2 for Solaris.
Thanks,
Tim
GSP

Hi Tim
Are you referring for device packages for RME ? If so which version of RME do you have ? You can downlaod device packages from CCO using this URL:
http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=4.3.1&mdfid=282635175&sftType=CiscoWorks+Resource+Manager+Essentials+Device+Package+Updates&optPlat=&nodecount=2&edesignator=null&modelName=CiscoWorks+Resource+Manager+Essentials+4.3&treeMdfId=268439477&treeName=Network+Management&modifmdfid=&imname=&hybrid=Y&imst=N&lr=Y
Hope this helps.. All the best..
Raj

HT5538 How to update the devices: after Change of Apple ID & Password

I changed my Apple ID name and password using my PC and was already verified.
How do I update the Icloud account settings in my Iphone4 and Ipod Touch 5th generation
with my new Apple ID? My old Apple ID Account name is greyed and cannot be edited in my devices.
And still prompts for a password with my old Apple ID in the prompt message.

Hi ilayski,
Sign out of the iTunes & Apps store and then sign in with your new AppleID. Delete the iCloud account, and then create a new one using your new AppleID.
Hope this helps!
Cheers,
GB

How to update Creative Suite Package (CS6) to newest desktop versions of all softwares?

I´ve got Creative Suite Package CS6 and would like to update this to the newest one but just noticed that Adobe is not selling Creative Suites anymore. How could I convert my CS6 to the newest versions of products? I´d prefer using desktop versions.

you can't buy cc/cc 2014. it;s subscription only. Creative Cloud pricing and membership plans | Adobe Creative Cloud

How to update authorised device on Ipod touch

I have recently changed laptops and I have changed the settings in i-tunes so that only the new laptop and my ipod touch are authorised devices. However, despite re-booting and re-syncing, my ipod touch still shows the old laptop as its only authorised device and will not completely update or sync by wi-fi...
any suggestions please??

What exactly happens when you try to sync via USB?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod

RME 4.0.6 Device Package update failure

Hi,
i have downloaded a lot of new device packages for the RME 4.0.6. If i install this packages i get the following error message.
Installation failed for product [Resource Manager Essentials] with message : com.cisco.nm.xms.psu.packagemgmt.InstallerException: Repository in use.
Another Package Support Updater client session may be modifying device support.
I searched for the psu.lock file but i couldn't find this file. How can i fix this without reinstalling the lms?
AndrÃ©

Hi,
i have attached the psu.log file. There is no .lock file, i've checked this again. I tried again to update the device packages
After 1 hour i stopped the update.( normaly an update take max. 10 minutes. During the device package update i could see the the psu.log file was going into a loop. It starts at 0 kbytes -> growing to nearly 950kbytes and than it starts again at 0 kbytes
Andre

Unknown Device Type in LMS v3.1

I have quite a number unknown devices registered under CS. How do I add new packages into LMS v3.1 so that these devices can be discovered correctly?

Download and install the latest mdf package from http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-cd-one available for your version of Common Services. Also double check (by snmpwalk with oid=.1.3.6.1.2.1.1.2) that devices are really supported in LMS 3.1

Which is latest OS sofrware? n how to update bold 9780?

I wanna knw tht which is da latest OS software for bb bold 9780 and how to update ma device to it??
Solved!
Go to Solution.

This all depends on your carrier. All carriers are different on what version of software they release.
If you want to provide you carrier we can certanly check. It can also be found here.
http://us.Blackberry.com/support/downloads/download_sites.jsp
Also if you plug your device into your computer and go to the website below or use the desktop manager which should tell you if there is an update for you device or not.
http://www.blackberry.com/update
This will take you to an update page and tell you if there is an update avaiable for your device.
Regards,
Nick
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

How to update software of ipod 4th gen

I have an ipod of the 4th generation. I have tried to search for articles that will help in assisting me with updating the device, but I have yet to find a helpful tip or piece of advice. If there is anyone who has knowledge of how to backup the data to itunes and how to update the device so that I can use current applications, please reply promptly.
Concerned Customer, Z. Berry

To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes
- A 4G to 6.1.6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
If the iPod already has iOS 5, then go to Settings>General>Software Update

LMS 2.6 / RME 4.0.6 : Update device packages

Hi All,
I want update device packages for the device Unknow c3560v2 and ME2400 on ciscoworks lms 2.6.
CCS= version 3.0.6
CM= version 4.0.10
CV = 6.1.5
DFM = 2.0.7
IPM = 2.6.0
RME = 4.0.6
The server doesn't have access internet so i downloaded files and copy this on directory psu.
1) I've tried directely upgrading the device package in RME, but it failed. He want file mdf v1.22 and the version is V1.20.
2) I've upgrading CiscoView for device, it's ok
3) I've upgrading Campus Manager with version 4.0.13, it's ok
4) I've tried upgrading the device package in RME, but it failed. He want file mdf v1.27 and the version is V1.25 after upgrade Campus.
I don't find on site cisco the version 1.27 of mdf, where i can found this file ?
I have the version 1.56 but it's compatible for LMS 2.6 and RME 4.0.6 ?
How can uninstall a version of mdf if I have a problem with this version?
thanks

Indeed. It does look like the only MDF available is 1.52 for CS 3.0
I also saw the note:
You must install Campus Manager 4.0.13 and MDF 1.27 before installing CMDeviceUpdates 2.0.
RME 4.0.6 Release Notes
FYI. LMS 2.6 is EOL. As such I suggest you contact your account team to see if they can acquire it for you.
Thanks.

LMS 4.2 fails Device Package Update

Hallo,
Device Package Update fails with this error:
Error while downloading package information from Cisco.com for the selected products. See the d:/CSCOpx/log/psu.log file for details.
PSU.log shows:
ERROR [RemoteRepSync : downloadPsuHeadersAsXml] : VDSException thrown com.cisco.nm.xms.vds.VDSException: CcoDownloadAdapter::getXmlFileList():IOException:connect timed out
best regards
Alex

What is the exact model of 3850 switch you're trying to monitor?
Following are the supported models :
Device Name
sysObjectID
Supported Software Version
Support Type
Device Name
sysObjectID
Supported Software Version
Support Type
Cisco Catalyst 3850-48P-E Switch
1.3.6.1.4.1.9.1.1641
Device Update
Cisco Catalyst 3850-48P-S Switch
1.3.6.1.4.1.9.1.1643
Device Update
Cisco Catalyst 3850-24P-E Switch
1.3.6.1.4.1.9.1.1642
Device Update
Cisco Catalyst 3850-24P-S Switch
1.3.6.1.4.1.9.1.1644
Device Update
Cisco Catalyst 3850-24U-E Switch
1.3.6.1.4.1.9.1.1767
03.11.35.EMP
Device Update
Cisco Catalyst 3850-48U-E Switch
1.3.6.1.4.1.9.1.1768
03.11.35.EMP
Device Update
If it is 3850-24p-L, it can be :
CSCuj61704 No support for 3850-24p-L in LMS 4.2.3
Try updating your mdf device package as well. Device package for Common Services.
For current Nexus device package issue, each device package is not individual, but has some dependant packages. Without which they are tend to fail during installation check.
You can select all the available device packages and try to install. It seems you dont have SharedDcmaIOS (3.1.7) installed and hence the package is failng due to pre-requisite.
You have to install each package which fails which consistancy check on other packages.
For mdf package update, you can select common service as well and check for update.
There may be some 3850 device packages already available, please share output of following command for us to see :
NMSROOT/bin/psucli -p rme -q -all
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

LMS 4.1 Device Package Update

Hi,
I'm having problems updating packages for my new install of LMS Prime 4.1 and hoped someone here could help in diagnosing why. I've attached the psu.log file.
Thanks in advance.

Yeah, for Inventory Config And Image Management (the traditional RME functions, in LMS 3.x lingo), you have to perform a separate "Software Update" (vis-a-vis Device Update, which is apparently for CiscoView). That's described in the same aforementioned URL, a little further up, Admin -> System -> Software Center -> Software Update:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/user/guide/admin/swcenter.html#wp1096852
The following page describes, in not-so-clear terms, whether it's Software Update or Device Update that's needed to get newer hw/sw recognized by the various pieces of LMS 4.1.
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html

LMS 4.1 Device Packages Update Installation

Hello, i used the software center to download latest device packages, all downloaded to PSU_Downloads folder , i want to know how to install them with GUI if possible , as i tried to use CLI but it seems that i'm using bad syntax.
Best Regards.

The cli syntax can be a bit tricky. If you have already downloaded the updates, you can perform the updates using the downloaded copies as your source. Please see step 2 of the procedure listed here, specifically:
To check for updates from a server, select the Enter Server Path radio button and enter the path or browse to the location using the Browse tab.

Update Flash Professional CC and Mobile Device Packaging

The adobe crative cloud app says that I have an upgrade for Flash Professional CC and Mobile Device Packaging. It has been failing for as long as I can remember. How do you download and install the update?
R/Jens

Here are the individual Flash updates: http://www.adobe.com/support/flash/downloads.html

HT2292 I changed my apple ID when my email was hacked. My devices need to know there is a new ID. my old one does not work. how do I update my devices?

How do I update my devices (Ipad and iphone 5) to new apple ID? I changed from my old one as it didnt work afer I created a new email as my old one was hacked.

Hi Krista motu B,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Best,
Jeremy

How to update a device package in LMS 4.1

Similar Messages

Maybe you are looking for