How to update a dynamic linked composition in Encore CS5 (from a Premiere CS5 sequence)

I created a project in Premiere CS5, I then sent it to Encore CS5 for Authoring. I created menus and then transcoded it and burnt my disk... HOWEVER, my client now needs to change one of the credits, so I did so using Premiere, but I can't figure out how to get it to update in Encore...
Can someone help?
Thanks!

Try the "Revert to Original" command.
-Jeff

Similar Messages

How to get Adobe Dynamic Link update?

I have finished few project with Adobe Dynamic Link but my last project has given me some run around, I have notice the Adobe Dynamic link has not been updated when updated my Premiere sequence. (I use the Sequnce for the timeline from Premiere) Is there a way to refresh the Adobe Dynamic Link so my Encore Project has the latest sequence. Thanks for your input.
Wayne

Try this:
http://forums.adobe.com/message/4052001#4052001

How to create a dynamic link in a Form to link to a specific FOLDER

Hello,
I have created a reports of all employees of my department.
This reports shows me the empno and ename
When I clicked on a empno ( for example empno = 1 ) then then I got a MASTER DETAIL FORM about that employee(empno = 1) .
Who he or she is and which course he or she had followed.
I want create a dynamic link in the MASTER DETAIL FORM which shows me directly the folder of that employee ( in this example folder 1 ).
If I clickt on the report with all employees of my department on an other number ( for example empno = 3333333) then if I click on the dynamic link in the MASTER DETAIL FORM I want to see the folder of employee 3333333 !!! You know what I mean ?
What I want to know is, how to create a dynamic link that shows me directly a folder which is dependent on which empno I had clicked on in the report ( report with employee numbers and ename )
Is there any way to pass some parameters into a link to a Folder ? Is this possible in Portal ? Does anyone know how to do this, or do you have a suggestion how to solve this problem ?
Thanks a lot !!!
Chu Lam

Hi Chetan,
I am glad that someone had replied on my question.
I will explain it to you again.
I have created a report that shows me all employees. If I click on a employee number then I get an MASTER DETAIL FORM on my screen with all the information(where he works now and which number I have to dial ifhow can I reach him by telephone) of that employee on which number I clicked on.
I really like this mechanism. (You click on a number and the information that you see in the next screen is dependent of the number you clicked on ! )I have created all this. It works fine.
What I want is to expand this example.
Every employee has a FOLDER (yes, those ones in Content Area ) which they can insert text or image into that folder. The folder name is just the employee number. ( employee with employee number 3303, he owns a folder which is named 3303 and an employee with empno 9999, he or she owns a folder with the name 9999. )
Every employee can tell more about himself in that FOLDER by iserting text and images. For example : What he likes, pictures of his vacation, something like this.
What I want is this :
If I click on the first report,which provides me all employees on screen, on a employee number 3303 then I get a Master Detail Form on my screen with all information about that employee with employee number 3303. And I want in this MASTER DETAIL FORM to create a link that shows me directly the FOLDER of that employee ( 3303), so I can learn more about employee with employee number 3303. But I don't know how to create this link.
That link had to be dependent on the employee number. The difficult thing about this link is that this link had to be dynamic.
I hope this will make it clear to you :
(report all employees:)
empno ename
3301 john smith
3302 peter clark
3303 wilson jones
If I click on a empno ( for example 3303) then I get a MASTER DETAIL FORM which provides me information.
(MASTER DETAIL FORM )
EMPNO 3303
ENAME wilson jones
department New York
mobile number 98908763
Company tel. no day
AOL 097485838 monday till wednesday
Oracle 04848584333 thursday and friday
LINK
(what I want is to create a link here )
If I click on LINK in this MASTER DETAIL FORM then I want to link to the FOLDER of this employee ! ( In this example it is FOLDER 3303.
BUT IF I CLICKED ON THE FIRST REPORT ON A DIFFERENT NUMBER ( FOR EXAMPLE 3301) THEN IF I CLICK ON LINK IN THE MASTER DETAIL FORM THEN I HAVE TO LINKED TO FOLDER 3301.
I just want to know how to make a link like this ( create a dynamic link to a specific folder ).
Thanks in Advance.
Chu

Yesterday's Updates to Dynamic Link Media Server

I woke to find four updates to CS6 (Au, Ae, Ps, and Pr) yesterday, which the Updater called "Dynamic Link Media Server CS6 1.0.1 Update."
I updated, and I updated my CUDA about the same time.
Pr started working slower. So, I reverted back, using my clone.
Not sure if this was a coincicence, or which update to blame.
I'm back to the performance from both that I was used to.
The CUDA update was for bugs I wasn't experiencing and for compatibility to 10.8, which I'm not running.
Was I too hasty? Do these Dynamic Link updates do anything? Improve anything?
MacPro3,1 - CS6 - Quadro 4000 - 10.7.4

I don't doubt your engineer for a second. I'm convinced now that the nVidia or most likely the CUDA driver is behind all my Serious Errors. I was getting them right after opening a project and trying to do anything at all today. I turned CUDA off, and was able to finish the project. When that was out the door, I reinstalled the CUDA and nVidia drivers, rebooted, opened my project, enabled CUDA, and Pr has been working without the errors.
Thank you, Todd!

Update zu Dynamic Link Media Server CS6 1.0.1 Installation fehlgeschlagen Fehlercode: U44M1P7

Hi all,
After download the update the AAM finish with 100% an then comes this message:
Update zu Dynamic Link Media Server CS6 1.0.1
Installation fehlgeschlagen Fehlercode: U44M1P7
Have anyone an idea?
thanks

Hi MSmerkl,
You might try downloading and installing the update directly from here:
Mac:http://www.adobe.com/support/downloads/detail.jsp?ftpID=5482
Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5504
-Dave

How to speed up Dynamic Link? What Hardware will improve this?

I'm currently using AE and PP CS6 with Dynamic Link and rendering out in Media Encoder is very slow. I am not using my computers full power, only about 25% CPU and half of ram. What other components could speed this up? SSD? Rendering on GPU?

In Dynamic Link scenario PrPro communicates with dynamically linked compositions via a single instance of headless AE, which, in turn, creates a bottleneck. You can't improve that with your hardware, you need to change your workflow: when you finish your work in AE, render a digital intermediate and replace your dynamically linked comp in PrPro timeline with that DI. See this good old thread in PrPro Forum, pay attention to Todd's comments.

How do I prevent nav links at bottom of site from wrapping?

Mac OS 10.6.7
Dreamweaver CS5.5
How do I prevent nav links at bottom of site from wrapping? And how do I right justify the links?
I changed something in CSS and now the footer links are wrapping. Previously, the links were at right/bottom of each page. When the browser window was made too narrow to display them, they would disappear along with the righthand side of the page. Now they wrap into multiple lines and expand out of the footer.
HTML:
<div class="footer">
      <span class="footerAlignLeft">© 2011 Dorsay & Easton LLP. All rights reserved.</span>
      <span class="footerAlignRt"><a href="index.html" title="Dorsay & Easton Home Page">  Home  </a><a href="index.html">|</a><a href="practice.html" title="Dorsay & Easton Practice Areas">  Practice Areas  </a>|<a href="team.html" title="Dorsay & Easton Attorneys">  The Team  </a><a href="contact.html">|  Contact Us  </a>|<a href="sitemap.html">  Sitemap  </a></span>
</div>
CSS:
/* ~~ The footer ~~ */
.footer {
     position: relative;/* this gives IE6 hasLayout to properly clear */
     clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
     background-color: #CC6600;
     font-size: 10px;
     color: #FFC;
     padding-top: 10px;
     padding-right: 0;
     padding-bottom: 10px;
     padding-left: 10px;
.footer a, a:link, a:visited, a:hover, a:active , a:focus{
     color: #FFC;
     text-decoration: none;
.footerAlignRt {
     margin-right: 10px;
     font-size: 120%;
     position: fixed;
     left: 520px;
     text-wrap: suppress;
     text-align-last: right;
Thanks!
gotsowell

Rather than posting code snippets, it's best if you upload your problem page and post a link here so we can view the live page in our browsers.

How to make a Dynamic Link starting in After Effects to Premier (not other way around)

I have seen a ton of tutorials how to Dynamic Link from Premier to After Effects. (but not the other way around. )
I need instructions/video how to link starting in After Effect to Premier.
For example if I make a title in After Effects and then want to dynamic Link it into Premier how is this done?
Thanks!!

I've looked at this too. When I first started using DL, I thought that it was basically a two way street between applications. But that analogy doesn't work very well. DL is PPro-centric. Like PPro is the hub, DL the spokes, and the other Abobe applications are on the rim. And this makes a fair amount of sense. The central feature of an editing suite is the editor, and that would be PPro.
Another way to look at it is that you can push from PPro to AE, and PPro can pull from AE, but AE can not push to PPro. So the direct answer to "I need instructions/video how to link starting in After Effect to Premier" is, you can't. What you can do is make your title composition in AE, import that AE project into PPro, and use the composition as you would any other asset in PPro. Then when you change your title in AE, you'll see the change in PPro almost immediately without you having to do anything.
When I'm making motion lower thirds, for example, I now make them in AE. I let the AE project reside in the directory with the PPro project that I made the lower thirds for. Then when I want the lower thirds in PPro, I just import the AE lower thirds into the PPro project. There's a few ways to do this. One is to use the Media Browser. The MB will open up the AE project for you and let you select which composition you want to import. Another way is to File...Adobe Dynamic Link...Import AE composition which does more or less the same thing. There may be other ways as well, IDK.

How to Create a Dynamic Link Oracle 10g

Hi all,
I have a requirement like i am using the below sql query in my application
select * from emp@testlink;Now i have 3 users i have created the seperate link for this three users.
ex: test and work and office
Now if test login to pc the above code will be
select * from emp@testlink;if work entered dynamically it will be as
select * from emp@worklink;same as office .
@||variable||link;
variable i have to pass it in dynamic.
How to achieve this??
Can anyone suggest me thanks in advance.
Cheers,
San..

Did you try dynamic SQL?
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/dynamic.htm
Something like this.... (UnTested)
DECLARE
v_user VARCHAR2(50);
BEGIN
EXECUTE IMMEDIATE 'select * from emp@' || v_user || 'llink';
END;In your case, the link name is based on the user, you can simplify it like this
DECLARE
v_user VARCHAR2(50);
BEGIN
EXECUTE IMMEDIATE 'select * from emp@' || LOWER(user) || 'llink';
END;You might need to use INTO clause for the select statements.
Regards,
Rakesh
Edited by: Rakesh on Apr 6, 2011 6:05 PM

How do I break Dynamic Link

I am editing a multicam music video. the multicam greenscreen footage starts in premire. I then send it dynamic link to AE. then I decide clip b is more appropriate than clip A. So I return to premire ctr z to remove dynamic link, swich to camera b and the multicam window updates. the moment I right click to send edit to AE, it switches back to to clip b in premire and appears in the original AE comp again. I then close AE, create a new project on transfer, the same thing happens. is the choice stuck in the pipeline or premiere and hw do correct the error.
Thans

I think you're asking for trouble trying to cut a multicam DL. The better work flow on this may be to start in After Effects and do all your green screen work first, then export out Intermediate files for actual editing in PP.

How useful is Adobe Dynamic Link???

So I want to start using this dynamic link. I already own Premiere CS4 and use After Effects 7.0. In order to use the link i have to purchase the whole suite (upgrade) for $1,100 - I called adobe. The only program I want to purchase is After Effect CS4 and that will cost $299.Why don't they offer the dynamic link without having to buy the whole suite? I own CS2 for PS, InDesign and Illustrator so I don't see the need to purchase the whole suite. Is it worth it to spend $1,100? Anyone else use the new suite???

function(){return A.apply(null,[this].concat($A(arguments)))}
pengh wrote:
Thanks... yeah i don't really mind working the "old way" especially with this new machine that is shipping in the mail. It's suppose to render drastically faster then my current workstation, so I guess we'll see. I think i'll get the new AE and wait till later
This is your best bet for now.
In theory, Dynamic Link would be great. But a Dynamic Linked After Effects comp in a Premiere timeline won't play back in anything close to real-time, which makes it very difficult to work with. So I still render out from AE at the highest quality I can, then import the rendered file into Premiere.
Hopefully Dynamic Link in CS5 will be usable, utilizing GPU-acceleration.

Adobe Premiere Pro CS5 Dynamic Link not working as part of Production Premium CS5

I ran into a situation whereby I recently reinstalled my Production Premium CS 5 onto a new computer and when trying to run the Dynamic Link out of Premiere PRO CS 5 to create a new After Effects composition, After Effects tried to start up but then crashed with the error that Production Premium was needed.
Yet, I had Production Premium CS5.
(Note: The crash didn't occur when I simply tried to use Dynamic Link without anything selected in my project or timeline - but the moment I had a clip in my timeline selected to work on it, the dynamic link would not work as covered above.)
In checking around the forums I found various answers to this problem such as rebooting the computer, reformatting hard drives and/or whatever. This all may be correct.
However, as I just went through that nightmare, I was not anxious to do that again. So, I called Adobe and the following solution solved the matter in 5 minutes:
1. Close all your other Adobe applications such as After Effects.
2. Open up Premiere Pro CS5 and then deactivate it by going to HELP>DEACTIVATE and then Permanently Deactivate.
3.Close the application and restart Premiere Pro CS5.
4.Then do the same to Activate it.
5. Have your serial number handy and plug it in when prompted.
Solved it right away and worked beautifully.
Not to say there couldn't be more complicated situations, but the above worked and the simpler the better is good for me. And I thought I would post this in case anyone else ran into this problem.

Thanks for posting your solution.

How can i create a link in the context help from frontpanel elements like knobs and so on

i want to create on context sensitive online help and therefore need to know how i can place a hyperlink in the context help from labVIEW of a frontpanel element

lotto;
You can place your help file in LabVIEW help directory, which should be in \help. If you place your help file in that directory, then when you start LabVIEW, you can access your help from LabVIEW's help menu (there will be an extra entry with the name of your help file.)
To link your control or vi to this help file, open the front panel (or the panel where you edit the control) and open the VI setup. In the help path field write the following:
:\name.hlp
Where "name" in the name of your help file. in the "Help Tag" field you should enter the tag you already assigned to the topic in the help at design time. (I suggest the tag to be similar as the vi or control name.)
After all this, the next time you start LabVIEW,
you should be able to access the context help file to your control or vi by right-clicking on it and selecting "Online Help".
IMPORTANT NOTE: Be aware that you may loose files you locate in special directories in LabVIEW, like the help, because those directories might be overwritten when you upgrade your software. Another option can be to locate your help file in a directory other than LabVIEW's help. The steps are almost the same, except that you won't be able to access your help file from LabVIEW's help menu.
Best regards;
Enrique
www.vartortech.com

How do I include a website footage on a video production in Premiere CS5?

Hi All,
I have seen various websites shown on TV and wondered how they did it. Kindly advice me on how to feature a website on a video production using Premiere cs5? Do I need to take a video shot of the website first (panning and tilting) before it is captured and moved to the timeline, or is there a software that I could use for capturing the website before editing it in Premiere?
Thanks
Gloria.

I use Camtasia Studio to record computer screen captures. I created a tutorial for editing Camtasia Studio footage in Premiere Pro:
Bellune Digital Video Services - Tutorials - Adobe Premiere Pro - Using Camtasia Studio Footage in Premiere
Jeff

How do I make dynamic links to Excel cells, not sheets?

Help! I thought I'd found the perfect way to link an in-progress Excel spreadsheet to an in-progress InDesign file. That allowed the Product Management group to do content, and the graphic group to do layout simultaneously. After several days of layout, someone changed the number of rows in the spreadsheet, and all the cell links to InDesign are broken. I have pages and pages already done, and the cells are filling with the entire spreadsheet, and not tracking to the moved cells. HELP!

Bob:
Well, you had my heart beating fast for a minute, hoping it was that simple. I tested in .xls, and it does permit the link back to a unique cell, instead of the whole sheet, but it doesn't track cell content that's moved to a new row/column position in the sheet. I think I'm out of luck -- and headed for a few beers.
Thanks.

How to update a dynamic linked composition in Encore CS5 (from a Premiere CS5 sequence)

Similar Messages

Maybe you are looking for