How to update ABSKZ field in the table EKPO

Hi
Is there any way to update the rejection indicator (ABSKZ) field of table EKPO?.
I am looking at BAPI_CHANGE_PO FM, But it does not have ABSKZ field in the item structure BAPIMEPOITEM.
Do I need to extend the BAPI structure with ABSKZ field ?
Regards
Raj.

Hi
To extend BAPI_PO_CHANGE for EKPO-ABSKZ field , we have to add field in the structure BAPI_TE_MEPOITEM to pass it to EXTENSIONIN. As ABSKZ field already availble in the EKPO it is not allowed to add ABSKZ in the structure BAPI_TE_MEPOITEM. it is throwing below error message.
Field ABSKZ in table EKPO is specified twice. Please check
Since it is not Z field and also not availble in the structure BAPIMEPOITEM not sure how to update ABSKZ field in the EKPO table.
Please advice.
Regards
Raj

Similar Messages

How to update xmltype field in the table

hi
I have table in DB which contains xmltype field. When I am dragging this table by wizard on a panel and run my project I cannot edit any field in this table and save its data it shows an error. But when I am not using xmltype field in a table then my program runs well.
How can I fix this proble?

repost

Update a field in the table

I am new to adf. I am trying to update a field in the table which is parent in adf tree
I had created a adf tree table
My Scenario:
=> If i selected the Parent row and after clicking the Post Button
=> A Field in the Parent table should get updated
which is the best approach to acheive it and how can i acheive it?

I am getting this error while i try to post the Document
Error 500--Internal Server Error
java.lang.NullPointerException
     at comm.rits.glm.view.backing.AGLM1010.cb5_actionListener(AGLM1010.java:259)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(Unknown Source)
     at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:788)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:306)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Edited by: asadrina on Sep 7, 2011 2:42 AM

Master Detail Form - How 2 update a field in the Detail form using a query?

Hello,
I have a master detail form with, each master record having a fixed(6) number of detail records. One of the fields in the detail record is the PART_DESCRIPTION field. I am trying to update this field by querying Table_X. TABLE_X is in the format of (desciption id, description). Description id runs from 1 to 6.
When the form displays, the PART_DESCRIPTION field for the 6 detail records needs to be automatically populated with the six values of description stored in Table_X. How can this be done?
Tried using session storage objects, but made no headway.
Would greatly appreciate pointers on how to go about doing this.
Thanks.
Dev

If you are on a Portal Version lesser than 3.0.9.8.3, then please try the following to populate
the PART_DESCRIPTION field.
Steps:-
1> Edit the form and go to the Additional PL/SQl section and put the following code in the
"...after displaying the page area" :-
declare
type t_vc_arr is table of varchar2(4000) index by binary_integer;
l_arr_desc t_vc_arr;
l_form_name varchar2(200);
l_form_state varchar2(500);
begin
l_form_name := p_session.get_module().get_name();
l_form_state := p_session.get_value_as_varchar2(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => '_FORM_STATE'
if l_form_state = 'QUERY_AND_SAVE' then
select description
bulk collect into l_arr_desc
from <schema>.table_x;
htp.p('
<script>
var descArr = new Array();
var Fidx = 1;
var formObj = document.WWVM'||p_session.get_id()||';
var fieldName = "'||l_form_name||'.DETAIL_BLOCK.PART_DESCRIPTION.0";
for i in 1..l_arr_desc.count loop
htp.p('descArr['||to_char(i-1)||']="'||l_arr_desc(i)||'";');
end loop;
htp.p('
for (var i=0; i < formObj.length; i++){
if (formObj.elements.name == fieldName+Fidx){
formObj.elements[i].value = descArr[Fidx-1];
++Fidx;
htp.p('</script>');
end if;
end;

How to update Reference field in the clearing document

Hi Friends,
While accounitng for billing document for sales Reference Key 2 is used for a data.
Now when the payment is recieved from customer and accounted, how to update the Ref 2 automatically from the primary document.
Pl, suggest.
Thanks
NNS

Hi Robert,
Thanks for answering.
I am looking at Ref 2 should flow automatically to clearing document from the accounitng document for billing.
Ex: Billing document is created and accounted. Ref 2 is AB
Now when receipt is accounted for this biling document this AB should flow automatically to Ref 2 field.
Thanks
NNS.

How to disable a field in the table maintenance generator of a table

dear experts,
i have created a table with 2 fields A ,B . i had created table maintenance generator for the table. i am entering the values for the table through table maintenance generator . for filed A i had given dropdown list which contains only 2
entries YES & NO. my requirement is if i select YES in field A , field B should be in enable mode(it must take some input), if i select NO in field A, field B should be in disable mode ( it should not take any input).
kindly help me....
thanks & regards
krishna

Hi Krishna,
A further to the above, you can go to SE11 and in the table maintenance generator click on
Fn.Gr.Text button, then go to Main program.
Here you will see "User-defined Include-files (if necessary). "
Just uncomment the PAI include and put your code..to make the field editable or un-editable.
To do that you might have to go to the screen painter and change that screen, to include those fields in a group or something, so that you can control them better.
Regards,
Sameer

How to Update a field on the list

Hi,
I want the field value to be edited on the list once the report is generated and Once it is Edited it has to be update into the Database table.
Can anybody tell me how can i code for this.
Regards,
Sri.

Hi
U have to use the events and own stauts to do that:
START-OF-SELECTION.
   SET PF-STATUS 'MY_GUI'.
   WRITE <VAR> INPUT ON.
AT USER-COMMAND.
   CASE SY-UCOMM.
       WHEN 'SAVE'.
           READ LINE <N> FIELD VALUE <VAR> INTO <VAR1>.
           IF SY-SUBRC = 0.
              Z<TABLE>-<FIELD> = 'VAR1'.
              MODIFY Z<TABLE>.
            ENDIF.
        WHEN OTHERS.
   ENDCASE.
<N> is number of the line of the page where the variable <VAR> was written.
Max

How to update multiple records in the table using POST parameters:

i got this idea from this website:http://www.karlrixon.co.uk/articles/sql/update-multiple-rows-with-different-values-and-a-s ingle-sql-query/comment-page-1/#comment-5409. Basically i am trying to update all the status in the results page, and by adding $i in front of the id in the text fields, and checkboxes, i can name the different inputs with different names:
The image of how it takes the inputs is shown here:http://forums.adobe.com/thread/709034?tstart=0
I tried this but got this error:Parse error: syntax error, unexpected T_IF, expecting ')' in C:\xampp\htdocs\Database Query\results_change.php on line 51
will not work in the update code section:
for($i=0;$i<$maxRows_Recordset1;$i++)
{$a=sprintf("%s",GetSQLValueString($_POST['changeid $i'],"int"));
$b=sprintf("%s",GetSQLValueString($_POST['checkbox $i'],"text"));
$display_order .= array(
    $a => $b
if($i<$maxRows_Recordset1-1)
$ids = implode(',', array_keys($display_order));
$updateSQL = "UPDATE `change` SET Status = CASE Change_id ";
foreach ($display_order as $a => $b) {
    $updateSQL .= sprintf("WHEN %d THEN %s ", $a,$b);
$updateSQL .= sprintf("END WHERE `Change_id` IN ($ids)");

Hi,
Try
BEGIN
FOR i IN 1..APEX_APPLICATION.G_F03.COUNT LOOP
    UPDATE xx_test
    SET checkbox = 'Y'
    WHERE rec_no = APEX_APPLICATION.G_F03(i);
END LOOP;
END;Code loops all checked checkbox. You do not need commit on page process.
Regards,
Jari
http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0

How to update key fields for table

Hi,
how to update key fields for a table.The update statement is not working for the same.
Regards,

Hi,
See the below example.
TABLES SPFLI.
DATA WA TYPE SPFLI.
MOVE 'AA' TO WA-CARRID.
MOVE '0064' TO WA-CONNID.
MOVE 'WASHINGTON' TO WA-CITYFROM.
UPDATE SPFLI FROM WA.
MOVE 'LH' TO SPFLI-CARRID.
MOVE '0017' TO SPFLI-CONNID.
MOVE 'BERLIN' TO SPFLI-CITYFROM.
UPDATE SPFLI.
CARRID and CONNID are the primary key fields of table SPFLI. All fields of those lines where the primary key fields are "AA" and "0064", or "LH" and "0017", are replaced by the values in the corresponding fields of the work area WA or the table work area SPFLI.
Regards,
raj.

How to update 2 fields automatically rest manually on page

Hello folks,
I have got a question on how to update 2 fields in a table automatically (in my case this is one field for the user and one field for the correct date and time). This should happen automatically every time an user changes a row in the table. But it seems as if i cant change the fields i tried it with the changing of the textfield but he dont change the values in the database. I even tried a separate update statement but since this is set after the commitchanges() command it seems as if he ignores any following commands.
So anybody a good idea how i can change easily these two data fields? I just cant believe that you must manually change the fields, thats not the use of these 2 fields.
Thanks in advance for your help
Acinonyx

To be exact i have got a page with different fields which get their data from my database. Two fields which contain an userid and the other a date and time value should get updated automatically when the user changes something of the other values on this page and press a button which calls the commitchange method. But since this should happen automatically and not manually i cant put these changes in the database. The manual changes are saved without any problems but the automatical changes not. So my question is how can i change a value programmatically and make him save these canges in the database?
I already tried to put the new values in the fields or even detailed in the database but i cant get him to update these two fields.
Acinonyx

How to update specific fields of a db table using MODIFY

Hi all.
I understand that MODIFY allows us to insert a record into the database if the a record with the same key is not there. If a record is there, it would update that record.
However, when the record is there, could i update SPECIFIC fields of the record, instead of updating ALL fields of the record?

Yes, you can with exception that you can not modify primary key values.
Here are the details about MODIFY db table command with examples
MODIFY - Change a database table
Variants:
MODIFY dbtab. or   MODIFY *dbtab. or
MODIFY (dbtabname) ... .
MODIFY dbtab FROM TABLE itab. or   MODIFY (dbtabname) FROM TABLE itab.
MODIFY dbtab VERSION vers. or   MODIFY *dbtab VERSION vers.
Effect
Inserts new lines or updates existing lines in a database table (s. relational database). If a line with the specified primary key already exists, an UPDATE is executed. Otherwise, an INSERT is performed. You can specify the name of the database table either in the program itself in the form MODIFY dbtab ... or at runtime as the contents of the field dbtabname in the form MODIFY (dbtabname) ... . In both cases, the database table must be defined in the ABAP Dictionary. If the program contains the name of the database table, it must also have a corresponding TABLES statement. Normally, records are inserted or updated only in the current client. Data can only be inserted or updated using a view, if the view refers to a single table and was created in the ABAP Dictionary with the maintenance status "No restriction".
MODIFY belongs to the Open SQL command set.
When the statement has been executed, the system field SY-DBCNT contains the number of edited lines.
The Return code is set as follows:
SY-SUBRC = 0:
    All lines were successfully inserted or updated.
SY-SUBRC = 4:
    One or more lines could not be inserted or updated.
Notes
   1. You cannot modify a line if there is already a line in the table with identical key field values in a UNIQUE index.
   2. Automatic definition of INSERT and UPDATE is expensive. You should therefore use MODIFY only if you cannot define the INSERT and UPDATE cases yourself in the program.
   3. Since the MODIFY statement does not perform authority checks, you have to program them yourself.
   4. Adding or changing lines with the MODIFY command is only completed after a database commit (see LUW) has been performed. Before the database commit has been performed, any database changes can be reversed with a database rollback (see Programming transactions).
   5. Synchronization of simultanous accesses by several users to the same set of data cannot be exclusively achieved with the lock mechanism of the database system. In several cases, you are recommended to use the SAP lock mechanism.
Variant 1
MODIFY dbtab. or
MODIFY *dbtab. or
MODIFY (dbtabname) ... .
Extras:
... FROM wa
... CLIENT SPECIFIED
See Cannot Use Short Forms and
Cannot Use *Work Areas.
Effect
Inserts a new line or updates an existing line in a database table. If you specify the name of the database table yourself, the primary key for identifying the line to be inserted or updated and the relevant values are taken from the table work area dbtab or *dbtab (see TABLES). If you declare the name of the database table explicitly, the program must also contain a corresponding TABLES statement. If the name of the database table is not determined until runtime, you need to use the addition ... FROM wa.
Example
Insert or change data of the customer Robinson in the current client:
TABLES SCUSTOM.
SCUSTOM-ID        = '12400177'.
SCUSTOM-NAME      = 'Robinson'.
SCUSTOM-POSTCODE = '69542'.
SCUSTOM-CITY      = 'Heidelberg'.
SCUSTOM-CUSTTYPE = 'P'.
SCUSTOM-DISCOUNT = '003'.
SCUSTOM-TELEPHONE = '06201/44889'.
MODIFY SCUSTOM.
Addition 1
... FROM wa
Effect
The values for the line to be inserted or updated are not taken from the table work area dbtab, but from the explicitly specified work area wa. When doing this, the data is read from left to right according to the structure of the table work area dbtab (see TABLES). Since the structure of wa is not taken into account, the work area wa must be at least as wide (see DATA) as the table work area dbtab and the alignment of the work area wa must correspond to the alignment of the table work area. Otherwise, a runtime error occurs.
Note
If a work area is not explicitly specified, the values for the line to be inserted or updated are also taken from the table work area dbtab if the statement is in a FORM or FUNCTION where the table work area is stored in a formal parameter or local variable of the same name.
Addition 2
... CLIENT SPECIFIED
Effect
Switches off automatic client handling. This allows you to edit data across all clients even when dealing with client-specific tables. The client field is treated like a normal table field that can be programmed to accept values in the table work area dbtab or *dbtab where the line to be edited occurs.
The addition CLIENT SPECIFIED must be specified immediately after the name of the database table.
Variant 2
MODIFY dbtab FROM TABLE itab.or
MODIFY (dbtabname) FROM TABLE itab.
Addition:
... CLIENT SPECIFIED
Effect
Mass modify: Inserts new lines or updates existing lines of a database table. The primary keys for identifying the lines to be inserted or updated and the relevant values are taken from the internal table itab. The lines of the internal table itab must satisfy the same conditions as the work area wa in addition 1 to variant 1.
Note
If the internal table itab is empty, SY-SUBRC and SY-DBCNT are set to 0.
Addition
... CLIENT SPECIFIED
Effect
As for variant 1.
Variant 3
MODIFY dbtab VERSION vers. or
MODIFY *dbtab VERSION vers.
See Cannot Use the VERSION Addition.
Note
This variant is obsolete.
Effect
Inserts a new line or updates an existing line in a database table, the name of which is taken from the field vers at runtime. If no line exists with the specified primary key, an INSERT is executed. Otherwise, an UPDATE is performed. The database table must be defined in the ABAP/4 Dictionary and its name must conform to the naming conventions for R/2 ATAB tables. These stipulate that the name must begin with 'T' and may contain up to four further characters. The field vers must contain the table name without the leading 'T'. Only lines in the current client are inserted or updated. The line to be inserted is taken from the statically specified table work area dbtab or *dbtab.
SY-SUBRC is set to 0 if the line is successfully inserted or updated. SY-SUBRC <> 0 is not possible since any other result causes a runtime error.
Hope this helps.
ashish

Need help in Populating a Z-field in the table "MARD"

Hi Group,
I have a requirement like as under:
1)
Need to add a field in the transaction MM01/02/03 screen in the view u2018Plant data / stor. 1u2019. And this field should go into the table u2018MARDu2019 table, by appending the structure and adding this field details in it.
2)
Once I post a value into this field thru the transactions (MM01/MM02/MM03) , I need the value in the screen to be populated into the table u2018MARDu2019 in the Appended Structure field.
Could you please help me out by getting a proper User Exit or BADI which fulfills the requirement?
in Summary, please let me know a User Exit or BADI which will update the Z-field of the table 'MARD'.
Thanks for the help in advance.
Regards,
Vishnu.

please check , it might help you.
How to add fields to MM01 Transaction
How to add a new field in MM01 with CONCEPT as a field?
How to add a new field in MM01, with say contaminent as a field?
HI ALL, How can i add new field in mm01 basicdata1 screen
Add button in MM01 Transaction
i want to add the one field in mm01 application how can i add the field?
If you dont get the answer still , please search the forum you will get many links for your requirement
Regards
Satish Boguda

How to update single field

Hi frnds,
                    How to update single field data in Z table .
                   I am taking data from screen, when i press update button the data will store specific field data in Z table.

Dear Rakhi,
You can use the below syntax.
Hope this would solve your problem.
LOOP AT tpra INTO wpra.
    UPDATE zpra
    SET    pra2 = wpra-pra2
    WHERE pra1 = wpra-pra1.
ENDLOOP.
In WHERE give KEY VALUES
In SET give the particular value that has to be changed.
Regards,
Pintoo
Edited by: pintoo2805 on May 18, 2010 7:10 AM

Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

Good day to all of you!
I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
Any help, pls?
Good day and thank you!

Hi Alex,
In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
and
Just read the OSS note mentioned earlier.
Symptom
You want to integrate customer-specific fields in material master maintenance.
Other terms
SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001
Solution
To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
      1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
      2. Enhancing online maintenance in customized material master maintenance:
      Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
      In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
      If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F):
      Application examples for standard field selection:
      The field is mandatory and is to be flagged with a "?".
      The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
      The following data is required for each field:
            a) Field name        (T130F-FNAME)
            b) Field selection group (T130F-FGRUP)
            Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
            You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
            Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
            c) Maintenance status (T130F-PSTAT)
            List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
            d) Reference        (T130F-KZREF)
            This indicator must be set if the field from the reference material should be proposed during creation with reference.
Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
In addition, you must not add new standard fields to table T130F.
      3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
      Add the fields to central field table T130F (see above).
      Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
      Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
      For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
      If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
      Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
      As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
            a) Add the customer-specific fields to include CI_MMH1.
            The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
            Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
            b) Activate include CI_MMH1.
            c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
            d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
check this link. It may helps you to solve your issue.
Thanks
Sravan

No update of field USEDSIZEPERCENTAGE of table DATASTATISTICS

Hello,
we are using a MaxDB 7.6.00.33 for a Content Server. Because there is no SAP an so no CCMS we monitored the database by script and Nagios. On of the dbmcli commands selects the field USEDSIZEPERCENTAGE of the sysinfo table DATASTATISTICS. Unfortunately the database got in state DB_FULL without recognized by our monitoring. A root cause analysis result in the fact, that the field USEDSIZEPERCENTAGE still had the value 13%.
Does anyone knows why this field is not updated anymore? All other fields of the table DATASTATISTICS seems to be up to date.
Thanks,
Norman Stoer

Hi there,
hmm... content server without SAP system? No idea how that is supposed to work...
Anyhow - you're using an acient version of MaxDB 7.6 and seem to hit the bug of [PTS 1142134|http://maxdb.sap.com/webpts?wptsdetail=yes&ErrorType=0&ErrorID=1142134]
So, install the current patch 7.6.06 and this should be fixed.
BTW: you may also use the DBAnalyzer to have your database monitored.
regards,
Lars

How to update ABSKZ field in the table EKPO

Similar Messages

Maybe you are looking for