How to update ADRT-REMARK field (by which tcode)?
How to update ADRT-REMARK field (by which tcode)?
Hi,
ADRT-REMARK basically stores the notes which you enter against any communication number such as Telephone Number, Fax number etc for any business partner.
Say for example if you want to address details of a customer via XD01 or XD02; then in the communication tab enter the telephone number or fax number.
Click the button to add more details or more telephone numbers.
Over there you will find a field called as Comments.
This field is ADRT-REMARK.
You do not have a single transaction to maintain this field.
It depends upon the business partner for whom you want to add the details.
For a customer it is XD01 or XD02
For a vendor it is XK01 or XK02.
For a business partner it is BP.
For a user it is SU01D.
Regards,
Ankur Parab
Similar Messages
-
How can i update the REMARK field in ADRT database table
Hi all,
How can i update the REMARK field in ADRT database table
By using Function modules or BAPIs
Please reply me fastHi,
you can try this code:
SELECT SINGLE * FROM KNA1 WHERE KUNNR = wa_kunnr.
IF sy-subrc = 0.
CLEAR adrct.
SELECT SINGLE * FROM adrct WHERE addrnumber = kna1-adrnr.
IF sy-subrc = 0.
adrct-remark = wa_remark.
MODIFY adrct.
ENDIF.
ENDIF
best regards,
Thangesh -
hi guys,
can you tell me how to update ADRCT-REMARK,
now i am try to use BAPI_ISUPARTNER_CHANGE and ISU_S_PARTNER_CHANGE, but both of them do not work.
so i was wonderingn where does this field can be maintained, in which transaction?
thanks.who ever decided on this issue?
Need to update the field of mass ADRCT-REMARK -
How to Update Business Area Field in Posted Document?
Dear All,
Pls tell me how to update Business Area in documents which are posted without entering Business Area field. Pls tell me how to achieve this without using Validations & Substitutions. Any table entries can be maintained for this? Kindly guide.
Regards
AbhijeetHi,
I think, you need to post mannually if you have the list of documents posted with out business area.
ex:
1.Before posting of accounting entry as below, you should deactivate business area component in OB65 againest your co.code
2.Post accounting entry as below
40 123456 without business area 100
50 123456 with business area ABC 100
3. Goto T.Code: OB65 activate the business area component.
4. After posting of accounting entry like above you should run transaction F.5D and F.5E again, make sure that above entry not come again while executing F.5D.
First you can try this process in dev client, if you are comfort with this process then follow the same in quality and production.
Note: You can do this transactions in production client, only when there were no users working on the system.
all the best
Regards,
Prasad -
How to update a single field in Word macro
Hello,
I am trying to create an AutoOpen() macro that will update the file name and path when user opens in a Word document, but I can't seem to find anything explaining how to update a single field, specifically the {FILENAME \p} field. There
are other fields in the document, so I do not want to update all the fields. Most of the links I found only explain how to update ALL fields. Can somebody please tell me how I can update only the filename and path field using an autoopen macro?
Thank youStefan's response is correct.
Here is a macro that should update only filename fields.
Sub FileNameFieldUpdateAllStory()
' Written by Charles Kyle Kenyon 15 November 2001 - modified for filename 10 Sept 2014
' repaired by Jezebel
' All Story Field Updater - Filename fields
Dim oField As Field
Dim oStory As Range
' On Error Resume Next
For Each oStory In ActiveDocument.StoryRanges
' This goes into headers and footers as well as the regular document
Do
For Each oField In oStory.Fields
If oField.Type = wdFieldFileName Then
oField.Update
End If
Next oField
Set oStory = oStory.NextStoryRange
Loop Until oStory Is Nothing
Next oStory
End Sub
See Installing Macros for help in using this.
Charles Kenyon Madison, WI -
How to update a custom field in declarative workflow with VS 2013
Hello,
How to update a custom field in declarative workflow with VS 2013
any help would be appreciated!!!!!
Thanks regards, Vignesh.Dear all,
I'm using 4.6C right now, i already implement BADI MEREQ001, but this only valid
for creating PR via ME51N.
I found an EXIT_SAPLEBND_001 and tried to implement it,
but i got another difficulties since how i transfer CEBAN structure to EBAN structure.
thanks very much.
Regards,
Billy -
How do I create a field, in which people can click to accept my general business terms?
How do I create a field, in which people can click to accept my general business terms?
I'm not sure what are InDesign's capabilities in this field, but I think
you can do everything there, except for setting up the button field with
the right options and applying the one line of code that allows the user to
import their own images into it. -
How to update a particular field in a form.
Hi Guys,
I just want to know how to update a paricular field in a form.
I want to upadate a field in a view BOM_RESOURCES_V
for that i've a procedure called process_rtg.
now i want to know how to use that procedure.hi,
check metalink Note:264711.1 on how to use ROUTING BUSINESS OBJECT API
( BOM_RTG_PUB.Process_Rtg package) -
How to Update the INTRASTAT field for Inclusion/Exclulsion (EIPO-SEGAL)
I would need to know how to update this field in transaction ENPA when the invoice is already posted ( so we cannot use the VF02) from an ABAP program that update the INTRASTAT data for an Exportation.
This field can be found in EIPO-SEGAL
Thanks in advance.Hi
See the Std Doc of this field
Exclusion/Inclusion indicator for declara. to authorities
Using this indicator, you can control if a document or a document item (SD billing document, MM purchase order) will be excluded from or included in one or more types of declarations to the authorities.
Proceed as follows:
1. Define the inclusion or exclusion indicator. Define for which declaration type an inclusion or exclusion is to take place.
2. Assign the indicator to the document or document item that you want to include in or exclude from a declaration. The assignment takes place in the Foreign Trade data of the document.
3. If you also want to exclude document items with particular item types from a declaration, assign an exclusion indicator to the corresponding item types in Customizing.
Example
You want to define an exclusion indicator that excludes documents from the EXTRASTAT and KOBRA declaration. Create an exclusion indicator and select the "exclusion column" in the definition of exclusion indicators for the EXTRASTAT and KOBRA declaration types.
As soon as this indicator is assigned to a document, this document will not be included in the EXTRASTAT and KOBRA declarations.
Note
Inclusion or exclusion indicators assigned at FT data header level in the document apply to all document items if there is no other indicator at item level.
in our case the values for this field are '01'
take the help of a functional consultant to populate this field
Reward if useful
regards
Anji -
How to update a custom field of MARC table using BAPI_MATERIAL_SAVEREPLICA
Hi,
I want to update a custom field (Appended field) of MARC table using BAPI_MATERIAL_SAVEREPLICA. Please help me in this issue. I cannot use BAPI_MATERIAL_SAVEDATA as this updated the MARC table record by record. I have to update bulk records at a time.
Thanks
Rahul.Hi,
Use the Documentation given for struture in BAPI docuemntation...
For loading data into custom fields of MARC use the structure - BAPI_TE_MARC.
First, structures BAPI_TE_<NAME> (<NAME> = MARA, MARC, MARD, MBEW, MLGN, MLGT, MVKE, MARM, MAKT) and the appropriate check structures BAPI_TE_<NAME> (<NAME> = MARAX, for example) have to be extended by the customer to include the required fields. The structures that are delivered as standard only contain the relevant key fields. When new fields are added to this structure, you should ensure that a field has the same name as the field in the database table. Furthermore, the fields in the structures BAPI_TE_<NAME> can only be CHARACTER fields. Data element BAPIUPDATE is to be used for the fields in the check structure (exception to this: key fields.)
Parameters EXTENSIONIN and EXTENSIONINX are used for transferring data to the method. Field STRUCTURE contains the name of the structure (for example, BAPI_TE_MARA or BAPI_TE_MARAX). This names is used to identify the work area (for example, WA_BAPI_TE_MARA or WA_BAPI_TE_MARAX) to which the data is transferred. The remaining fields in parameters EXTENSIONIN or EXTENSIONINX contain data for the key fields (for example, the material number) and the data for customer-specific fields. The number of characters reserved in both parameters for the contents of the customer-specific fields must match the number of characters for the relevant field in the work area. If the number of required characters is less, the remaining characters are left blank. Only when all characters have been filled can the contact for an additional field be transferred. Bear in mind that only data for which an appropriate indicator has been set in the work area can be updated to the database.
Regards,
Bhargava -
IS-RETAIL: How to update custom enhancement field using BAPI?
Hi gurus,
Like ECC BAPI: BAPI_MATERIAL_SAVEDATA,
This BAPI(BAPI_MATERIAL_MAINTAINDATA_RT) is specific for IS-RETAIL to create and update material master data.
But now If I append one custom field "ZFIELD" to end of table MARA, my question is how to update this custom enhancement field(ZFIELD) using BAPI(BAPI_MATERIAL_MAINTAINDATA_RT)
Thanks in advance!Hi DongHai,
I suggest you create your own BAPI. Just copy the codes in BAPI_MATERIAL_MAINTAINDATA_RT and add your custom fields. If you want to append the data of the custom field in table MARA, first, you have to create a structure table then goto SE11, type MARA and display. Click the APPEND STRUCTURE then choose the structure that you've created. Hope this will help.
Rewards if useful
Regards,
Mark -
How to update the Customer field value of PO Item under the Delivery Address Tab?
Hi Friends,
i tried to update the Customer field Using Bapi_PO_change.I passed the PO Order no,POADDRDELIVERY data with Item no,Adrees no,Customer no.But i am getting no data changed message from return table.I attached the screen shots.So please suggest me the helpful information for resoving this issue.
Thanks,
DineshThank you friends,
My Problem was resolved.In my case i have passed the customer value in BAPI_PO_CHANGE POITEM Table with updated customer value.
Thanks,
Dinesh -
How to update Business area field for alread
Hi,
Recently we activated Business area financial statements in our system. After that all SD entries are showing Business area field in all SD billing-Accounting documents.
But the entries before the above change were not showing Business area since it was not activated before. But i want to update the Business area for the old documents also. so that it will be useful for me in reporting purpose.
Kindly suggest me if there is any PROGRAM to update Business area field for the old documents.
Thanks
SunilHi,
Please check the OSS Note 549182 - FAQ: Business Area Accounting
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=549182
Also OSS note 41294:-
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=41294
Regards,
Gaurav -
Update the "remark" field in general data of a BP (using IDOC in LSMW)
Hi,
I have to create and udpate BP with comments in the general data. I have no problem to manage this field in creation mode. I only use the segment "E101BAPIAD_REM" from the "CRMXIF_PARTNER_SAVE_M02" Idoc basic type. I fill the following fields: "LANGU, LANGU_ISO, ADR_NOTES".
However in update mode I don't success to update the value for the field "REMARK". I use the second segment "E101BAPIAD_REX" and i fill only field "ADR_NOTES" with value "X" and "UPDATEFLAG" with value "U".
I tried several value and several cases but i failed each time. If anybody has already managed this data with IDOC I would be very interesting...
regards,
Fabrice Mouyebe.Hi Thirumala,
thank you for your answer but you speak about the field "AddressGUID" of E101BUS_EI_ADDRESSREMARK but I haven't this field at this level. This field is linked to the segment "E101BUS_EI_BUPA_ADDRESS_KEY", isnt'it ?
Effectively i have certainly a problem with the Address GUID. I have to test it because it doesn't work with only UPDATEFLAG at 'X' and CURRENT_TASK too.
Thanks,
fabrice. -
How to find internal table fields from which table.
Hello Experts,
I have to use a dynamic select inner join query.
SELECT (lv_string)
FROM (from_tab)
INTO CORRESPONDING FIELDS OF TABLE <fs_itab1>
WHERE (where_tab).
ELSEIF table_1 NE ''.
SELECT *
FROM (table_1)
INTO CORRESPONDING FIELDS OF TABLE <fs_itab1>
WHERE (where_tab).
in that LV_string is dynamicaly select. from a structure which is a combination of say VBAK and VBAP
i have to
CONCATENATE 'VBAK~' wa_fields-fname INTO str_temp.
CONCATENATE lv_string str_temp INTO lv_string SEPARATED BY space
CONCATENATE 'VBAP~' wa_fields-fname INTO str_temp.
CONCATENATE lv_string str_temp INTO lv_string SEPARATED BY space.
with there identifire....how to find that...
Regards,
Ketan.Ketan,
I believe you CAN find this only when you are creating lv_string from your structure (or whatever it is).
So paste that code that what is your 'structure' type and on what conditions you want to Fill lv_string from it.
in that LV_string is dynamicaly select. from a structure which is a combination of say VBAK and VBAP
If you have a custom or standard Structure from which you need to fill lv_string, then you should have no worries to full VBAK~ or VBAP~ because fieldnames will be always unique in any Structure and hence ~ additions are not necessarily needed.
The issue can be in the case where you are picking few fields each from std tables VBAK and VBAP in your lv_string and
your "(from_tab)" is an inner join condition. I believe in that case you should be able to identify VBAK~ and VBAP~ while populating lv_string itself. Also you can use DB view MASSVBAP.
Regards,
Diwakar
Maybe you are looking for
-
Rearrange Music Within a Playlist
Probably a dumb ?, but after I have added songs to a playlist, how do you change the order of the items within the playlist?
-
Attachment files to an invoice -- how to store them?
Hello, Our developers use the FB02 transaction code and after entering a document number and company code they click on the "Services for Object" button>Create>Create Attachment and then attach a .PDF file to the invoice and save. Now, I have a coupl
-
related to this topic i posted in some thred ,but for proper understanding , i write here again. i need to read images and excel file from zip and extract to some folder, in my struts application. i am able to read and write text files with inputStre
-
Group messages in iOS 8 updated not working on my iphone 5
i updated to the new iOS 8 this morning on my iphone 5 and now the group messaging isn't working. no group message option in setting neither. help please.
-
CWS request removal from block list
I had a client who is using CWS report that one of my domains is being blocked due to its inclusion in a malware database in CWS. Does anyone know of any way to request removal of a domain from the CWS block list? I called TAC and they stated that th