How to update bios for N560GTX-Ti Twin Frozr II/OC

hi juys ...
i want to update my bios for my msi vga in title
this is my s/n :602-v238-220B1108035113
i need flash npw please any one can help me with correct bios and the way to flash
this is my gpuz
i used driver ver 301.24 beta
my bios
http://www.mediafire.com/?se5ue1ls0bh6x64

Quote
tnx for advice svet
is the bios related to temp or not
no the new vbios is not related to the temp.
Quote
i have before same card but not oc and high temps can't over 75
but when i have the oc edition now the temps in high load between 80 and 90
is that safe or not sorry my bad english
some units are running hotter than another.
you can try to reseat the VGA heatsink and to reapply the new thermal paste,
to check if this will help to drop it a bit.

Similar Messages

Requesting New BIOS for N560GTX-Ti Twin Frozr II

Hello, forgive me if i'm a bit slow, but this stuff is all a bit new to me. I've read that a lot of crash issues with this card (the ones i seem to be having) are video BIOS related?
So I figured I'd give this a try.
Card Serial Number: 602 - V238 - 370B1203014155
GPUZ info:
My current BIOS i have a mediafire link, but it wont allow me to post it, if you have another way for me to do so I'll get right on it.
EDIT: nvm i found it here when i tried to upload it from GPUZ: http: //www.techpowerup.com/vgabios/120003/msi-gtx560ti-1024-120222.html
Thank you in advance for any assistance

Quote from: Svet on 28-April-14, 20:51:46
how do you know that's your vbios?
opposite. in very rare cases the vbios can help with such.
is this a new card? or used one? if yes does it worked before?
what are your computer specifications? list full PC specifications , see >>Posting Guide<<
I only mention that i thought it was a vbios thing because i read a thread that had multiple people having problems with the same card (although it really does seem to have problems with the nvidia drivers). I have tried all number of different freshly installed driver versions, but to no avail.
I know its my vbios because when i tried to upload it to the GPUZ database it said it already existed and gave me that exact name.
the card was new when i got it about a year ago, these problems have been occuring since then (mostly with the driver updates) and I've permitted it up till now, I'm sick of my pc rebooting and getting no video output.
System specs:
Board: Gigabyte Z77-D3H
Bios:1.0
VGA: N560GTX Ti Twin Frozr II 1024
PSU: (this info will come later when i have time to check)
CPU: Intel Core i5-3570k @3.40GHz 3.80Ghz
MEM: Corsair (s/n 25855899) 2x4G CMz8GX3M2A1600C9
HDD: ST500DM002-1BD142 ATA
OS: Win 7 x64 Ultimate

No avalible update bios for GTX 570 TWIN FROZER 3?

no avalible update bios for GTX 570 TWIN FROZER 3?
i,ve a frustrating problem with this card in dx11 Constantly in game jusy in game with support of directx 11.

Try increasing your core voltage using msi afterburner. My card personally is stable at 0.9750mv and some users are stable at 0.9880mv. Good luck mate!

Driver for N560GTX-448 Twin Frozr III Power Edition/OC -l- split

I bought the card about four weeks ago and just now I had the opportunity to test it.
When I installed the video card in my PC, the device manager appears only a standard VGA video card. When I installed the driver, Device Manager showed a yellow exclamation on Nvidia's GeForce GTX 560 Ti saying "Windows has stopped this device becouse encounter some problems (error 43). I tried running some games but I could not open them, and with some drivers the screen was filled with artifacts
I tried various drivers on my two PCs, from one that comes with the video card to the 295.73 driver, and each time the same warning on device manager. Can anyone help solve this or may I do a RMA to MSI?
My systems:
AMD A3500
Gigabyte A75M-D2H
4Gb RAM Kingston DDR3
SevenTeam 550W.
Intel Core2Quad 9400
Gigabyte EP43-DS3L
8Gb RAM Corsair
SevenTeam 750W
Thank you.

Quote from: Bernhard on 20-March-12, 00:42:10
You sure your PSU has enough amps on the 12V rail and you connected the PCIE power connectors properly ?
Have you checked your Motherboard's BIOS revisions for updates regarding the later video cards ?
Your PCIE Bus interface should be 2.0 X 16. Have you reseated the card properly and disabled the on board graphics in your BIOS ?
My PSU is a SevenTeam 750ZAF with 750W. I used it to do SLI of my 9800GTX+ in the other computer and never had problems with it. I doubt that this could be my problem.
The GA-EP43-DS3L already has the ultimate BIOS and I did the update on the GA-A75M-D2H BIOS. Nothing new, the problem persist.
Anyone of my boards does not support PCI-Express 2.0 but this is not a requisites for work of the video board like said the MSI page:
http://www.msi.com/product/vga/N560GTX-448-Twin-Frozr-III-Power-Edition-OC.html#?div=Feature
"PCI Express 2.0 doubles the bandwidth of previous generations of PCI express up to an astonishing 16Gb/s. This maximizes the performance of current graphics cards in today's most demanding games and applications. PCI Express 2.0 products are fully compatible with mainboards with other versions of PCI Express."

Satellite A200-1DN - How to update BIOS for Windows 7

I'm running 32bit Windows 7 on a Satellite A200 1DN. I've been having battery problems (plugged in, not charging) and I understand I need to update my BIOS. However I can't find a BIOS update for Windows 7, only Vista and XP.
Can anyone help? Should I update with the Vista BIOS? Are there any other options for solving this battery problem? I've already tried an ATX reset, and uninstalling the Microsoft ACPI Compliant Control Method Battery.
Any advice would be very much appreciated.
Thanks,
Ian

Theoretically, you can install Windows Vista to update Bios and return Win 7, then. Before doing, try this:
Unplug the computer from the AC adapter and turn it on. Let the computer run under battery power until the computer turns off
Remove the battery pack. Using a soft cloth, wipe off the battery packs connectors and the AC adapters connectors.
Re-insert the battery pack and plug the computer into the AC adapter
> I've already tried an ATX reset, and uninstalling the Microsoft ACPI Compliant Control Method Battery.
by the way, did you have the same issue before installing Win 7?

Request : UEFI GOP BIOS for MSI GTX670 Twin Frozr IV PowerEdition OC

Hi, I would like to request these card UEFI GOP BIOS. Here the details;
Model: N670GTX Twin Frozr IV PE OC
S/N: 602-V284-030B1301135790
Thanks.

Quote
1)Do I need to configure something inside the bios before install?
You need to enable Windows 8 Features in bios before install which are also called like that (e.g. Fastboot).
Quote
2)How to properly make bootable usb to install WIndows 8 as UEFI Mode and is my usb need to be in GPT too? I using rufus, I set it as gpt partition for UEFI so that it will format my usb into GPT for UEFI windows installation mode.
The install media stick doesn't have to be GPT. Read that guide: http://pcsupport.about.com/od/windows-8/a/install-windows-8-usb.htm
Quote
3)What is the best way to make my SSD into GPT formatted?
https://forum-en.msi.com/index.php?topic=163500.0

REQUEST GOP / UEFI BIOS for MSI 7950 Twin Frozr 3GD5/OC

R7950 Twin Frozr 3GD5/OC
SN: 602-V277-05SB1205141813
Current BIOS version is: 015.020.000.000.001083
Thanks

here it: https://www.dropbox.com/s/mdxq5dy38pqws27/200.rar?dl=0
for flash guide:
Quote
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the provided archive (200.rar) and put the included file (TV277MH.200) on that stick.
Rename TV277MH.200 to 200.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 200.rom [ENTER] and let it flash the vbios.

Need bios for 2 580 twin frozr/oc .

Card #1
sn: 602-v255-01sb1101008767
dafault: 823/1645/2138 1.000v
target (use it now with ab) 822/1645/2138 1.025v or 1.038v
Card #2
sn: 602-v255-01sb1101008737
dafault: 823/1645/2138 1.013v
target (use it now with ab) 822/1645/2138 1.025v or 1.038v
The reason I put 1.025v or 1.038 is because both those volts are stable on both cards individually and in sli so I'm not sure which is better to use.
Also , I have a problem with heat on the #1 card while they are in sli (no problems what so ever with heat while by themselves) but in sli the #1 card gets up to 97c so I'm hoping it's just because the cards sit right next to each other on my Gigabyte ex58-UD3R which I will be getting another MB that I can do sli with a gap in between or could the heat be from something else like my evga sli bridge ?
I also have problems with the screen becoming all fuzzy and red from Stalker COP and it also happened when playing Metro 2033 but that went away after I reinstalled the nvid 266.58 drivers.
I haven't been able to test Stalker cop again in sli because the heat is scaring me.(the red fuzzy thing has never happened while in single mode)
Could this also be the sli bridge I'm using ?
i7 920-Zalman 9700 / GA EX58-UD3R / MSIx2 580 Twin Frozr II/oc / 3x2g 1333 / Cougar sx850w / Silverstone Raven 2ew

Got my 1155 set up going now msi p67a gd65 b3 and the two 580oc twin frozrs and it's running nice and cool (70c load 38 idle) and thats the highest card.
I'm using the msi sli bridge that cam with the gd65 b3 and the temps are great and 3dMark 11 adv ran like butter and so did the Heaven 2 benchmark, Lost Planet 2 and GTA4 gay tony both ran fine all the way through with no problems but lower fps than with only one card.
Stalker COP bench mark is still turning my screen green though ? had the same problem before with Metro 2033 but haven't tried it on the new board.
Running both cards at 1.000v 800 1600 2048 via AB and everything else is at default for now.
Just ran Dirt2 bench in ultra got 61fps but when I quit and it went to the desk top it was all static looking but not green this time and I opened up the display panel and changed my res which made the static go away than I just put it back to 1920x1080 and all is good but I have to figure out how to stop the static krap, I thought it might just be dx11 but Lost Planet 2 dx11 bench had no problem ? ... the search continues.
Temp finally went up to 81c with Dirt2 on ultra , but it played just fine the couple of races I did in normal single player mode but when going back to the desktop it's always static looking which seems to change colors. ?
(https://home.comcast.net/~ptown57/grn.jpg) pic of green screen during Stalker COP benchmark.
(https://home.comcast.net/~ptown57/prpl.jpg) pic after playing Dirt 2 just fine.
Played Bulletstorm for about an hour with no problems and no messed up screen during or after plus the temps never got passed 70c but I know it's just dx10.
i5 2500k/msi p67a gd65 b3/580 twin frozr oc sli/g skill rj's 2x2 1600/Cougar sx850w/Silverstone Raven 2ew/

UEFI Bios for MSI N680GTX Twin Frozr 4GD5/OC

Looking for UEFI Bios for 680 GTX cards so I can get rid of the rotten windows 8.1 watermark
Display device : MSI N680GTX series on GK104 GPU
Display driver : 331.40
BIOS : 80.04.47.00.67
GUID : VEN_10DE&DEV_1180&SUBSYS_28221462&REV_A1&BUS_1&DEV_0&FN_0
Multi-GPU role : master
GPU2
Display device : MSI N680GTX series on GK104 GPU
Display driver : 331.40
BIOS : 80.04.47.00.67
GUID : VEN_10DE&DEV_1180&SUBSYS_28221462&REV_A1&BUS_2&DEV_0&FN_0
Multi-GPU role : synchronized with master

That was all the text I got from NNVflash.
Here's the GPUZ uploads
Card 1
https://dl.dropboxusercontent.com/u/36151830/GK104%20card%201.rom
Card 2
https://dl.dropboxusercontent.com/u/36151830/GK104%20card%202.rom

[Request] UEFI Bios for Radeon HD7850 Twin Frozr 2GD5/OC

Hello folks, new member here. I'd like to open by thanking this community for the great level of education and support provided here. I have always been an EVGA guy, and I have been quite impressed with my MSI experience so far and this forum just validates that experience...It's going to be a tough choice where my dollars go moving forward and that's saying a lot about how good MSI has been!!
Onward and upward, I need a UEFI/SECUREBOOT/GOP/VBIOS for my card.
S/N: 602-V273-050B1301146609
Also, once I receive this bios, can someone please clarify the proper procedure for flashing it to the card, I have searched and I have seen a few different methods referenced, I just wanted to know what the officially accepted way of doing it is. I assume it's good practice to backup the current vbios that is on the card just in case as well and if there is a procedure for that as well.
Finally being new to all this UEFI stuff, after flashing the card, if I decide to pull it and place it in a non UEFI system, will I have to flash back to the old BIOS or will it be backwards compatible with non-uefi systems?
I'm new to the whole UEFI environment and am still figuring this all out, thanks for the patience and help.
Nate

you can use this one: https://forum-en.msi.com/index.php?topic=181106.msg1301663#msg1301663
instructions are included there
Quote
Finally being new to all this UEFI stuff, after flashing the card, if I decide to pull it and place it in a non UEFI system, will I have to flash back to the old BIOS or will it be backwards compatible with non-uefi systems?
its backward compatible

GOP/UEFI Bios for 560 GTXti Twin Frozr OC

Hello.
I've tried several of the BIOS in this forum with a "mismatch" message from the nvbios utility.
Here's the output of my nvflash command with the info, in case you can provide a uefi capable BIOS. Going crazy since the my new z87 motherboard is not able to boot from it.
nvflash.exe /v
NVIDIA Firmware Update Utility (Version 5.142)
Adapter: GeForce GTX 560 Ti (10DE,1200,1462,2382) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the
EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (1F,6601) : Atmel AT25FS010 2.7-3.6V 1024Kx1S, page
Reading adapter firmware image...
IFR Data Size : 0 bytes
Image Size : 63488 bytes
Version : 70.24.2E.00.02
~CRC32 : 7B2155B6
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GF104B Board - 10400050
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 560 Ti
Board ID : D205
PCI ID : 10DE-1200
Subsystem ID : 1462-2382
Hierarchy ID : Normal Board
Chip SKU : 400
Project : 1040-0050
CDP : N/A
Build Date : 06/08/11
Modification Date : 11/09/11
UEFI Support : No
UEFI Version : N/A
UEFI Signer(s) : Unsigned
Sign-On Message : GF114 P1040 SKU 50 VGA BIOS
MSINV238MS.2A3
And the Serial Number:
S/N: 602 - V238 - 130B1103019368
Thanks in advance.

There is no GOP compliant vbios for a GTX560ti or any GeForce prior to GTX6xx series. You have to get a newer vga if you want to use UEFI booting.

Driver for N560GTX-448 Twin Frozr III Power Edition/OC

So... where is it?
I've just bought one for a new build (my Chrsitmas present to myself) and I'm trying to check for the latest drivers.
There's nothing available to download on MSI's site for the card, and nVidia says that the hardware is not supported! I've tried their 'detect my hardware' and downloaded the latest GeForce driver. My card is detected as a 560 Ti but both complain that it is not supported.
Please help...

I've updated my system specs - the old ones made me realise how long it is since I first joined here.
The BSOD happened during me not even being there... I had installed the driver (seemed OK), done some windows updates that needed a restart, then left the PC while I went for a brew. When I came back the BSOD was waiting for me. I didn't read past the 'If this is the first time..' and just hit the reset button in disgust.
If it does it again I'll try to analyse the dump and see what went belly-up.
Seems OK so far though, it's been on all evening since then, including playing unreal tournament 3 for a while and running a few VM's in VMware.
So far the only thing to cause my CPU fans to speed up noticably was doing the windows updates!
I have to say I'm impressed with the graphics cards capabilities so far. But then I've upgraded from an MSI NX8600 (and a 7900 running my second monitor) so there should be a slight improvement...

REQUEST GOP / UREQUEST GOP / UEFI BIOS for MSI R7950 TWIN FROZR 3GD5/OC

I am now looking for a new BIOS to support the UEFI motherboard I have.
r7950 TF 3gd5/oc BE
s/n 602-v276-188b1212032244
xxxhttps://drive.google.com/file/d/0By0Uau6qfN7ZMDBIR0lsVUlFcjg/view?usp=sharingxxx
xxxhttps://drive.google.com/file/d/0By0Uau6qfN7ZVl9MZ3UtbFdaUFk/view?usp=sharingxxx
Thanks

attached below

MOVED: [REQUEST] UEFI/GOP Bios for GTX 760 Twin Frozr Gaming 2GD5/OC edition

This topic has been moved to GAMING Graphics Cards.
https://forum-en.msi.com/index.php?topic=254481.0

topic unlocked
why did you locked your topic since you don't have any replies yet
you can use this one: https://forum-en.msi.com/index.php?topic=177650.msg1283908#msg1283908

UEFI GOP BIOS for MSI GTX670 Twin Frozr IV PowerEdition OC

Hi guys!
I hope I won't take too much of your time by sending you all you need.
S/N 602-V284-030B1208060109
Current ROM: dl.dropboxusercontent.com/u/27518429/GK104.rom
Thanks in advance!

How to update bios for N560GTX-Ti Twin Frozr II/OC

Similar Messages

Maybe you are looking for