How to update Bootcamp 3.1 and 3.2 wthin black screen Win 7

Hello,
I was installing Window 7 Ultimate on my iMac and still stuck at black screen with blinking cursor. Read tones of posts and still couldn't fix it. My Bootcamp was 3.0.1, do I need Bootcamp 3.1 then 3.2? I downloaded Bootcamp 3.1 & 3.2, but can't run it as it can only run from Window environment, right? But I stuck at black screen, how to install Bootcamp 3.2?? Any kind advise please.
Thanks

Don't know how many tries on TS3173 and still didn't work for me.
After reading from threads after threads, I got it fixed with following steps:-
Solution 3:
If you applied solution 2 and you still have problems, try the steps below.
Repair startup issues
1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe - more information)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
Press ENTER after each command.
Restart your computer.
(from this thread http://discussions.apple.com/thread.jspa?messageID=11431092&#11431092)
Good luck.

Similar Messages

  • How to update cost condition VPRS and Updation from VPRS to new cond ZVPR

    Hi All,
    How to do and is there any way to update the VPRS cost condition whenever vendor sends confirmation of material and cost after purchase order.
    After receiving the confirmation form the vendor,the VPRS cost condition should get updated in the system automatically.
    We have one cost condition type ZVPR which is same and consists of same properties of VPRS. How to update this ZVPR condition from VPRS Condition.
    Thanks in advance....
    Regards....Venkat
    Edited by: venkat t on Feb 16, 2009 11:57 AM

    Hi venkat
    Check the link
    [How to update cost condition VPRS and Updating from VPRS to new cond ZVPR;
    NOTE : Dont post in many forums
    Regards
    Srinath

  • How to update Tr code FB02   and update the field reference key1 (bseg-xref

    Can any body
    help me how to update   Tr code   fb02
    and  update the field  reference  key1 (bseg-xref1)  with the interest amount
    calculated.
    Below i have  written My  program  flow logic
    The program should read the open items i.e debit items in the customer account,
    Based on the  invoice date and customer payment terms  calculate the due date and then the  interest should be  calculated on that item based on the due date.
    Use the  transaction  fb02  and update the field  reference  key 1 (BSEG-xref1)
    with the interest amount calculated
    Only  consider  customers whose  interest indicator  knb1-vzskz = 'vk'.
    Interest is to be  calculated for every  30  days
    at the rate of  1% .please see example below.
    Document date is 01.01.2007
    for amount  1000SGD   payment  term  7  days
    It becomes  due  on  08.01.2007
    until  06.02.2007 you should not  consider  for calculation of interest
    SGD  on   7.02.2007 run you can consider this  item for interest calculation

    Hi Robert,
    Thanks for answering.
    I am looking at Ref 2 should flow automatically to clearing document from the accounitng document for billing.
    Ex: Billing document is created and accounted. Ref 2 is AB
    Now when receipt is accounted for this biling document this AB should flow automatically to Ref 2 field.
    Thanks
    NNS.

  • I have had lightroom 4 for awhile and would like to know how to update to lightroom 5 and how much it would cost

    I have had lightroom for awhile and would like to know how to update to lightroom 5 and how much it will cost

    You can buy an upgrade to 5 for $79 from the Adobe store: Products. You can buy it for a few dollars cheaper (not counting tax and delivery) from Amazon and other places online.
    When you install 5 and start it, it will make a copy of your 4 catalog and convert it to version 5 (leaving the 4 catalog untouched): Lightroom catalog FAQ.

  • How to update SDABW(Process Indicator) and EXPKZ (Export indicator) in LIKP

    How to update SDABW(Process Indicator) and EXPKZ (Export indicator) in LIKP Table without using UPDATE statement

    I believe SAP automatically updates those fileds while creating the delivery document.
    rthanks,
    krishna

  • How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

    Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update  to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
    The Background/history
    I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8.  I created a single partitioned drive to install windows 7 professional 64 bit.  The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in.... 
    The installation of Windows 7 Pro 64-bit
    So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black....  in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
    The problem, re-emphasized :  I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files?  not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run...  Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver  without having been able to complete the windows 7 installation because the monitor goes and stays black????
    This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
    Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
    ---I've been told to install the osx dvd and run "setup.exe"  - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
    ---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/  for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
    ---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

    hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something?  if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean?  it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
    Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this?  just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600?  (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
    So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
         1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
         2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

  • HT201365 How do I download Whatsaap, Facebook and Skype into my home screen. When I try it gives me an erros message saying that this is not available in a Panamanian store and I live in the US. HELP????

    How do I download Whatsaap, Facebook and Skype into my home screen. When I try it gives me an erros message saying that this is not available in a Panamanian store and I live in the US. HELP????

    Change your country on iPhone, iPad, or iPod touch
    Tap iTunes Store, App Store, or iBooks Store.
    At the bottom of the Featured page, tap Sign In.
    If you're already signed in, skip to step 5.
    Tap Use Existing Apple ID.
    Enter your Apple ID and password and tap OK.
    Tap your Apple ID.
    Tap View Apple ID or View Account.
    Tap Country/Region.
    Tap Change Country or Region.
    Tap the Store menu and tap your country.
    Tap Next.
    Review the Terms and Conditions and Apple Privacy Policy.
    Tap Agree if you agree to the terms and conditions.
    In the prompt that appears, tap Agree.
    Select a payment method and enter your payment information.
    Enter your billing address and tap Next.

  • My App Store Icon is stuck in Newsstand. How do I get it out and back on to home screen?

    My App Store Icon is stuck in Newsstand. How do I get it out and back on to home screen? Have tried via itunes to move it and also swipping it - just won't come out.

    I have the same problem!  Let me know if you manage to sort it out.  My iPad did the same thing but to full restore from iTunes sorted that out. Have you tried that? No such luck with my iPhone.

  • How do i get the time to stopping coming on and off on my black screen. is that daydream

    how do i get the time to stop coming on and off on my black screen. is that daydrea

    https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/95499/p/30,6720,8882

  • My phone keeps flashing the apple icon and going to a black screen.  It will not reset.  How do I fix this?

    My phone keeps flashing the apple icon and going to a black screen.  It will not reset.  How do I fix this?

    also have this problem.  will not reset. checked power cord, it charges other phone. 

  • In the process of reseting phone and got stuck on black screen with spinning logo

    in the process of reseting phone and got stuck on black screen with spinning logo
    what do I do

    Hey amreed2012,
    Thanks for the question. The steps in the following resource may resolve your issue:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • Hp desktop a1742n will not startup it says no signal and i get a black screen

    Hi everyone this is my first time posting here and I seriously need your help.  I have an Hp desktop a1742n and everytime i turn it on I get a message that says no signal and i get a black screen. I know its not the monitor or the cord because i connected them to my laptop with no issue. i have checked the mouse and keyboard as well. I would hate to pay for a new computer when if this one can be repaired with a few steps from home. Also the fans are running the lights on the CD drive opens and closes and seem to respond when a disk is placed in there. and i don't hear any beeps can anyone help.

    Hi,
    If you are having startup problems, try following the steps in this guide: http://www.selectrealsecurity.com/fix-windows-startup/
    It provides instructions on how to fix Windows startup problems. If you have any questions, just ask. I hope this helps you.
    Brian
    "An ounce of prevention is worth a pound of cure"

  • Satellite A100-646 and external monitor shows black screen

    Hello to everybody,
    I have a similar problem with A100-646 (bought in Italy). Laptop's LCD and external monitor shows black screen but system boots without other problem. When laptop is not used for a long time (half a year) it work for one week without any problem.
    Unfortunately, there is no proper service in a place where I live. Perhaps, there is a problem with power supply.
    Is there other idea? Does anybody have a service manual? ([email protected])

    It is not easy to find shop where you can order original and new hardware components.
    Best source for such parts is definitely eBay where you can buy used but well working components.
    Upgrade? You must know that upgrade on mobile computers is not the same as on desktops. Cooling possibilities are not the best and each notebook model has optimized cooling system for original parts. So new graphic card can be more powerful and produce more heat and it is definitely not good for your notebook. So best thing you can do is to replace it with original part.

  • Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video?

    Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video? (Powerpoint Presentation 2013)

    You asked your question on the wrong forum. Try one for the Flash Player

  • I tried to restore from 4.2.1 to 4.3.3 through iTunes my iphone4 was on state after restore it gave error 3194 and my phone got black screen its not getting on what to do to turn on it

    I tried to restore from 4.2.1 to 4.3.3 through iTunes my iphone4 was on state after restore it gave error 3194 and my phone got black screen its not getting on what to do to turn on it

    http://support.apple.com/kb/TS3694#error3194

Maybe you are looking for