How to update Chipset Version?

Hey guys,
Im looking for some help. I was recommended to download Chipset, Intel VGA, then NVIDIA VGA...
I have a GT70 0NC-051US with NVidia Geforce GTX 670M, so I went to msi.com/support and found my make/model and saved all the files prior to installing...
Opened the saved file for the Chipset to install it: Intel(R) 7 Series Chipset, Version 9.3.0.1025.... I get a message stating, "This computer does not meet the minimum requirements for installing the software" even though I pulled it from the recommended drivers for my make/model...
Am I going about this the wrong way? Could I get someone to inbox me with a quick solution? Am I required to download Chipset and Intel VGA prior to updating my Nvidia driver?

GT70 0NC-051US is which model in name? There are quite a few GT70 models with 2QD, 2PE, Dominator, Pro, Dominator Pro, and etc listed in their names. I tried a quick search but couldn't tie the "MSI GT70 0NC-051US" to a specified name to ensure you have the correct download. I would start there. If you know what it is (you likely do) you should make sure there isn't more than one available download. Also, perhaps, you could try downloading your drivers directly from the manufacture... I had to do that for my WLAN card recently. Even though MSI updated the WLAN driver package a few days ago (tying it to the killer network manager and LAN driver) they failed to update it to the most recent one and it didn't work correctly. If there is a mistake make sure to list as much information about it as possible to help others. If you still need help, provide more information to make it easier for other to help you. GOOD LUCK.

Similar Messages

  • How to update a version 6.0 of Acrobat Reader Professional when upgrading windows XP to 8.1 ?

    How to update a version 6.0 of Acrobat Reader Professional when upgrading windows XP to 8.1 ?

    There is no product called Acrobat Reader Professional. There are two possibilities with different answers.
    1. You have Acrobat Professional (no "Reader"). You will have to buy the latest, Acrobat 11 (XI) Pro. No upgrade pricing is available for version 8.
    2. You have Adobe Reader (no "Professional"). You can download the latest free Adobe Reader http://get.adobe.com/reader

  • TS4062 how to update latest version of iphone 3gs

    how to update latest version of iphone 3gs?

    Hi chrasa,
    The forum supports VS setup and installation. I think your issue is more about Wix. So I suggest you psot your issue to the related forum below.
    http://windows-installer-xml-wix-toolset.687559.n2.nabble.com/
    I will move the thread to off-topic forum. Thanks for your understanding.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to update macbook, version OS X 10.5.8 what next version?

    how to update macbook version the current software is OS X 10.5.8 what next version?
    have snow loepard v6 on usb stick but doesnt seem to work?
    any ideas?

    When you hold down the Option key when you hear the starting chime does the USB stick show up as a viable start-up disk? If not then you may have to buy and use the DVD.
    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    System Requirements for 10.6:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible internet service provider: fees may apply.

  • I have Photoshop CS6.  I recently purchased a Nikon D750.  I can't seem to figure out how to update my version to read raw files.  I am not computer illiterate, but not a IT wiz either.  I have a pc with windows 7.

    I have Photoshop CS6.  I recently purchased a Nikon D750.  I can't seem to figure out how to update my version to read raw files.  I am not computer illiterate, but not a IT wiz either.  I have a pc with windows 7.

    Have you updated Camera Raw to 8.7?
    Camera Raw plug-in | Supported cameras
    Camera Raw plug-in installer

  • HT4623 how to update from version 4.1 to 6.0

    how to update from version 4.1 to 6.0

    What do you mean unlocked one?  You are talking about software updates here and software updates are free and for a 3gs you can only update to 6.1.3 as you have already been told.
    If you are talking about phones themselves, then this is totally different and you need to be more specific or get your question right.
    There is no unlocked software update - it s free.

  • How to update software version ios 7 to my ipod touch?

    how to update a software version ios 7 to my ipod touch?

    Confirm that you have a fifth-generation iPod touch:
    http://support.apple.com/kb/HT1353
    If you do, post back. If you don't, then you can't update it to iOS 7.
    Regards.

  • HT4589 how to update to version 10.0.7

    how to update final cut pro x to version 10.0.7

    Go to the App Store and sign in with the Apple ID that purchased the software.

  • HT1222 My version is 4.3.5(8L1). Can't see setting have update! How to update to version 5

    How to update my iPad
    My iPad setting no update ?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT4623 Hi, how to update iPad version 1.

    Hi,tried to update my iPad but found out it does not have an software update shown on the screen. How do I go about it? Many thanks!

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 4: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • How to update 8700g version 4.1

    So i have a blackberry 8700g and my software is version 4.1 I need to upgrade it in order to use the Desktop manager. how do i do that?

    First locate your carrier and the OS file you wish to use.
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
    1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
    2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
    3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to update a versioned container with changes in the DB

    Hi,
    I've reverse engineered a database schema into a container, and then I versioned it as v1.0.
    Now, that schema has changed in the database, and I'd like to update the container with those changes, and version it as v2.0.
    What is the best way to do it?
    Is it posiible to capture only the changed or new items into the v1.0 container, and then version it as v2.0?
    Thanks

    Check the application in and then check it out
    This will take it to the next level of versioning.
    However the version will be like 1.1 and not 2.0.
    There is a way to make it 2.0 but I do not remember the steps.
    Once you check it out it will be identical to 1.0 but the version will be 1.1 and you can make your changes and the next time it is checked in and out it will be set to 1.2 etc.
    At this point I have to ask if versioning is realy what you want to do. Don't get me wrong Configuration managment is a great thing. However most people do not understand it or how to use it. And they usualy get themselves in trouble with it. So if you know what your doing with it then go for it.
    Hope this helps.
    Also once you version your repositry you cannot go back. You are versioned forever.
    Michael

  • HT1338 how to update macbook version Mac Os X 10.5.8 to newer version?

    I have a MacBook version Mac Os X 10.5.8.
    How to I update it to a newer version so I will be able to connect my iPhone to my itunes.

    For the iPhone 5 you need at least iTunes 10.7 for installing it you need at least Mac OS X Version 10.6.8.
    This Version of OS X ist called Snow Leopard, Snow Leopard is also the first Version where you can use the AppStore for Mac so for Updating to Mountain Lion.

  • How to update trial version to full using activation code just downloaded

    Can anyone help with this - there seems to be no way of doing this. I just got the activiation code sent thru for the full version, mainly to save having to do mail order/go to shop, but how do you update the trial?? The trial version hasn't converted automatically as is implied on the invoice! Thanks SA.

    Hi,
    It seems return table contains many errors and all errors cannot be sorted out at once. Try to correct one by one.
    E MEPO 002 PO header data still faulty
    W ME 658 Please also populate interface parameter
    POHEADERX
    For the above errors, Try to populate POHEADERX to the BAPI "BAPI_PO_CHANGE".
    W ME 887 Error transferring ExtensionIn data for
    enhancement CI_EKKODB
    Also please ensure the data must be transferred to extension structure.
    E SG 105 Enter rate INR / rate type M for 07.02.2014 in
    the system settings
    Maintain the exchange rates properly through the OB52 transaction. TCURR table will hold these values.
    Please try and let me know what other issues you are facing.
    Regards
    Gangadhar

  • How, after updating to version 7.0.1 (Firefox) I can go back to the 6.0 version ?

    after updating firefox to 7.0.1 several plug-ins were disconnected a.o. the plug-in I need for the e-print function of my HP printer.
    I do not want this to happen and therefore tried by means of systemrestore to go back to the earlier ( probably 7.0.0 ).
    For some reason this did not work out good and I am now still on the 7.0.1
    Question is: how do I get the earlier version back and installed

    Your crashreport is<br>
    https://crash-stats.mozilla.com/report/index/bp-24b848e4-7d2a-4cf1-b0b0-31ccd2111021<br>
    Firefox 7.0.1 Crash Report [@ mozcomp.dll@0xab51 ]<br>
    Startup crash in mozcomp.dll with Oracle Enterprise, F5 Networks, Passlogix V-GO, IBM Tivoli Access Manager SSO<br>
    See related Bug [https://bugzilla.mozilla.org/show_bug.cgi?id=680927 680927] for more info<br>
    The likely problem is use of certain Oracle etc software, the developer Oracle being aware of the problem and working on a fix. Meanwhile there is a registry hack as a potential workaround, or the simpler workaround of downgrading temporarily to firefox 3.6.23.<br>

Maybe you are looking for