How to update CO-PA planning manually  ?

hello everyone.
i used to upload CO-PA planning by KE13N (upload by excel).
but now i have error that i cannot solved (I request SAP customer message ).
so i have question that i can update CO-PA planning in SAP directly or not ?
if yes, please specify transaction code. and how to.
thank you very much for your time.

No .. ,like CCA.. you cannot plan COPA plannng fully manually ....
You have to use KEPM or KEFC upload .......... Some datas like COPA assessment cycles can be transferred from other modules..
Can you share the problem you are facing in KE13N
Regards
Sarada

Similar Messages

  • How to update PO invoice plan?

    Dear all,
    I need to update Start-date and End-date of PO's invoice plan, the two dates storage in a Z-table.
    Anyone who can tell me which function module I should use or how I can achieve this functionality.
    Thanks very much!
    Best Regards.

    >
    kumar kaduri wrote:
    > Hi,
    >
    > You didn't mention about the link of your Z table to PO Invoice. I think it must be updated in any user Exit while crating PO. If not there must be some Z program for it. Even z program doesn't exist, you need to write a zprogram if you want to update it after creation of PO Invoice or if you want to update your z table while creating invoice, you need to write code in user exit.
    >
    >        Kumar.
    >
    > Edited by: kumar kaduri on Jun 29, 2009 11:17 AM
    Hi Kumar
    Sorry I haven't describe it clearly.
    First I create a PO with Invoice Plan, but the Start-date and End-date is estimated.
    Then vendor will send the actual dates of invoice plan, and these data will be stored in Ztable.
    Finally a Zprogram will be executed to update the Start-date and End-date of the invoice plan.
    I need to write code in the Zprogram to realize this functionality.
    Thanks.

  • HT1338 how to update from 10.4 manually

    im trying to update my iphone to the new software. i couldnt do it cuz i need to download itunes 10.7,i cant download itunes 10.7 cuz i need MAC OS X higher than 10.4(which is what i have now) i just want to update my iphone! HELP!!!!

    1) Make sure your computer meets Snow Leopard technical specifications - http://support.apple.com/kb/SP575  This mostly means making sure it is an Intel Mac (yours is) and has at least 1GB RAM (more is recommended).  To check RAM, go to the Apple in the upper left corner of any window, then  "About This Mac". Now continue to "More Info...".  It should say you have at least 1GB of "memory".
    2) Apple no longer carries 10.6 in its stores or online. Telephone Apple to purchase a Snow Leopard disc. In the USA: (800) 676-2775 (contact information for other countries: http://support.apple.com/kb/HE57)
    Alternatively you can buy from online retailers but anticipate paying much more than the original price which is the price still charged by Apple
    3) Backing up your computer before upgrading is always a good idea.
    4) After installing from the DVD, update your Snow Leopard installation using Software Update or manually downloading and installing the Mac OS X 10.6.8 Update Combo v.1.1 - http://support.apple.com/kb/DL1399

  • How to update to 4.0 manually?

    Please help me manually update to 4.0.
    I will prefere Dutch explanations.
    TY

    well we can help you with english here http://talk.sonymobile.com/thread/35239

  • How to update GRPO baseref field manually

    Dear All,
    We are creating PO using DTW option. Minimum line items in PO is 500. While posting GRPO by using Copy from option, it is very difficult for us to find the line items in the wizard. We also have partial receipts against PO.
    We want a option that while posting GRPO, system should automatically allocate the open PO as base ref based on the PO date. Or is there any other method available to simplify this process.
    Please suggest us the simplified process because it takes more time to enter one GRPO.
    Thanks and Regards,
    Ravi.

    Ravi......
    I can understand your problem very well.
    As I suggested you, you can manage and make it simpler so that you can know which line you have to select.
    For this follow this process.
    Create UDF as DocNum, LineNum at Row Level.
    Now Apply the following FMS in Purchase Order Form as
    For DocNum Field
    Select $[OPOR.DocNum.0]
    For LineNum Field
    Select $[POR1.LineNum.0]
    Now when you apply these FMS in PO row level its value gets stored which you can access in the screen of Wizard during Copy From.....
    But all you need to enable those fields through Form Settings......
    Hope this will help you......
    Regards,
    Rahul

  • Update Infotype 1005 (Planned Compensation)

    Hi,
    Can anyone let me know...how to update infotype 1005 (Planned Compensation.
    Transaction to create 1005 (Planned Compensation).
    Thanks in advance....
    Sandeep.

    Hi,
    You can goto tcode pp01 or pp02(Expert mode) to create the planned compensation for the job or position.
    Rgds,
    Balaji.

  • How to update planned values in SAP PS

    Hi all,
    I'm trying to update a cost planning in SAP PS from an interactive report.
    Does anyone know of a function module or class I can use for this? Or come up with another clever solution to do something similar.
    Some extra info:
    The manual transaction for this is CJ40 of CJR5 (with own defined planner profile)
    Any help would be greatly appriciated.
    Regards from a cold Amsterdam,
    B E R T

    Hi BERT,
    Thanks for my first ever SDN points!!! I've no idea what they do but it sure feels good to have them
    With regards to your question:
    It's taken a while but I've found something you might find useful. Rather than just giving you a code snippet, I've found a program that is dedicated to this FM! Please have a look at program:
    <b>RKKIPL1P</b> (Example Program K_COSTS_PLAN_INTERFACE_PERIOD).
    I hope this helps.
    Hafeez

  • Urgent!! How to update Planning book and change when planning will start

    Hi Gurus,
                 I had configured the system and we can initilize planning area every month and my question is 
    1. How to update planning book and change planning start date every month?
    Thanks a Lot
    Regards,
    Raj

    Hi,
    In the planning book-dataview, you will assign the time bucket profile, and will be on rollling basis. if you want the forecast profile on rolling basis, maintain the forecast and history horizon as periods then that will also be on rolling basis.
    Regards,
    Raj

  • How to calculatee Dep manually and how to update fixed assets register

    Hi Gurus,
    I have a issue like Asset vale is Rs. 1000 Dep % is 1st year 35%  2nd year 15%3rd year 15% 4th year35% for 4 years .if buys another  asset in addtion to old asset Rs.500  the depreciation is same has earlie said percentage . my clients wants to post  this depreciation manually.and how to update fixed assets  register.
    Regards,
    Ssriram.

    Hi
    Depreciation terms are applicable to the entire asset (not for individual transactions). If you want to have different terms, you may create the additions as Sub-asset (Tcode AS11) to the main asset and enter depreciation terms.
    Thanks
    Palani

  • How to update 2 fields automatically rest manually on page

    Hello folks,
    I have got a question on how to update 2 fields in a table automatically (in my case this is one field for the user and one field for the correct date and time). This should happen automatically every time an user changes a row in the table. But it seems as if i cant change the fields i tried it with the changing of the textfield but he dont change the values in the database. I even tried a separate update statement but since this is set after the commitchanges() command it seems as if he ignores any following commands.
    So anybody a good idea how i can change easily these two data fields? I just cant believe that you must manually change the fields, thats not the use of these 2 fields.
    Thanks in advance for your help
    Acinonyx

    To be exact i have got a page with different fields which get their data from my database. Two fields which contain an userid and the other a date and time value should get updated automatically when the user changes something of the other values on this page and press a button which calls the commitchange method. But since this should happen automatically and not manually i cant put these changes in the database. The manual changes are saved without any problems but the automatical changes not. So my question is how can i change a value programmatically and make him save these canges in the database?
    I already tried to put the new values in the fields or even detailed in the database but i cant get him to update these two fields.
    Acinonyx

  • How to update my phone is my 3g plan

    dear sir
    i don't have wifi network but i am use 3g data so how can update ios 8.2 on my phone

    Hello chetansoni,
    If you would like to update your iPhone over the air, you would need to be connected to Wi-Fi to do so or you can use iTunes to do it as well. Take a look at the article below for more information. 
    Update the iOS software on your iPhone, iPad, and iPod touch
    https://support.apple.com/en-us/HT204204
    Regards,
    -Norm G. 

  • OS X Update stalled, how do I install it after manual restart?

    I recently downloaded a huge update (560MB), and when I restarted the computer (automatically installing the update) it froze at about 10%. I left it for several hours before deciding to manually shut down, holding the power key. After restarting a second time, it booted straight up and didn't show that it was installing the update. Since I know I have downloaded this huge update and that it should still be on my computer - what do I need to do to install it?

    you can not restart an update downloaded via Software update. if you are not sure if it's installed you can check it in system preferences->software update.
    also, you can manually download that update from apple website and reinstall it that way.

  • How to update PAYMENT tables manually from backend after invoice creation.

    Hi,
    I am Financial beginner. how to update payment details from invoices using backend in P2P.
    Thanks and Regards,
    Srikanth

    I have created a invoice and updating payment details.
    I just need small information regarding payaments.
    After invoice we create payments using validate, pay in full.
    But What actually happens when we do validate and pay in full.
    and what are the fields and tables effected in this process.FAQ: Common Tracing Techniques in Oracle E-Business Applications 11i and R12 [ID 296559.1]
    R12 Docs
    http://docs.oracle.com/cd/E18727_01/index.htm
    eTRM
    http://etrm.oracle.com/
    Thanks,
    Hussein

  • HT4623 how can i update my os by manual?

    how can i update my os by manual

    See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 6.1.x
    iPhone 4S                                    iOS 6.1.x
    iPhone 5                                      iOS 6.1.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 6.1.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 6.1.x
    iPad 3                                          iOS 6.1.x
    iPad 4                                          iOS 6.1.x
    iPad Mini                                     iOS 6.1.x
    =====================================
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • Does anyone know how to update/recompile PHP to include IMAP?

    I've just installed phplist (http://www.phplist.com/), which is a newsletter mailer based on php. Some of the features require that IMAP be installed with the php installation. Evidently Apple's OSX install does not include IMAP in PHP by default, but presumably IMAP can be added if PHP is recompiled. (See http://www.php.net/manual/en/ref.imap.php). I was planning on updating PHP using Alex's very helpful tutorial, available at http://osx.topicdesk.com/content/category/4/18/62/, and at the same time adding IMAP.
    Altho Alex does not touch on IMAP in his tutorial, I believe that to includ IMAP in the PHP installation, the configuration string must include "--with-imap-ssl=/sw --with-imap=/usr/share/c-client", or something similar. In any event, it seems that "c-client" does not live in /usr/share nor anywhere on my system, so I have not attempted an installation so far.
    Does anyone know how to update/recompile PHP to include IMAP? And if "c-client" is required, how do I intall that first?

    Disregard last post--that was a non-starter, but I think I have a successful installation, which I will post here as the documentation on this from php and from phplist is pretty bad:
    First get and compile the c-client library, which is necessary for those wanting to run phplist:
    sudo mkdir -p /SourceCache
    cd /SourceCache
    sudo curl -O ftp://ftp.cac.washington.edu/imap/c-client.tar.Z
    sudo tar xzf c-client.tar.Z
    cd imap-2006h
    sudo make oxp
    sudo mkdir lib
    sudo mkdir include
    Next open /SourceCache/c-client and drag all the */.h files (including the aliases) into “include.” Then drag all the */.c files (aliases too) into “lib”.
    Find “c-client.a” and change name to "libc-client.a" and place in the lib folder.
    Correct permissions on lib and include.
    Finally install php (cheers to Alex) as follows:
    cd /SourceCache
    sudo curl –O http://us.php.net/distributions/php-4.4.7.tar.gz
    sudo tar xzpf php-4.4.7.tar.gz
    cd /SourceCache/php-4.4.7
    sh
    CFLAGS=-DBIND8COMPAT
    export CFLAGS
    sudo ./configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --with-apxs --with-ldap=/usr --with-kerberos=/usr --enable-cli --with-zlib-dir=/usr --enable-trans-sid --with-xml --enable-exif --enable-ftp --enable-mbstring --enable-mbregex --enable-dbx --enable-sockets --with-iodbc=/usr --with-curl=/usr --with-config-file-path=/etc --sysconfdir=/private/etc --with-mysql=/usr --with-mysql-sock=/var/mysql/mysql.sock --with-imap=/SouceCache/imap-2006h --without-pear
    sudo make
    sudo make install
    sudo apachectl graceful restart
    exit
    One last question, Alex: can I safely delete the SourceCache folder now that the installation is complete? My only concern is that the config string points to items in the folder, and I'm wondering whether I ought to have placed them inside /usr/share instead of SourceCache, or doesn't it make a difference?
    Lost count Mac OS X (10.4.9)

Maybe you are looking for