How to update configuration in SO with BAPI: BAPI_SALESORDER_CHANGEBOS

Hi Experts,
Now, I would like to update the characteristic values of configuration in sales order via BAPI : BAPI_SALESORDER_CHANGEBOS. But, I can't find right way to execute this BAPI. I tried so many times and no data changed. I wonder that i didn't specify the correct import parameters.
Is anyone can help me? Thanks for your kindly support in advance.
Best Regards,
Ryan

You are using Commit after the BAPI right

Similar Messages

How to update my ibook G4 with out itunes

how to update my ibook G4 with out itunes

Your question begs more questions before an answer...
What are you trying to upgrade, and why would you try to use iTunes
in a vintage G4 computer that cannot run an OS X later than 10.5.8
at best? (and only if it has a processor at least 867MHz or better)
With at least a 1.0GHz iBook G4 you could run Leopard 10.5.8, and
the system requires a retail DVD to install the 10.5, then go online
after installation, to get the Combo 10.5.8 update, by use of Software
Update within that first earlier system...
If the computer does not have at least the minimum processor, it would
not be able to see Leopard as a system, so Tiger 10.4.11 is the last...
http://www.apple.com/support/leopard/
iTunes does not upgrade or update much of anything in an obsolete &/
or vintage Mac OS X before the Intel-Mac era, and prior to OS X 10.6.8.
If your computer does not have an iTunes version at all, you can go to
Apple support downloads and look at older iTunes, and older safari,
and some other bits that are limited to their respective vintage OS X.
Usually the upgrade path utilizes DVD media or CD media, for software
& depending on what kind of software, then later get update-downloads.
To see if there may be anything not already installed in the system or
applications that could exist in the Apple support download servers,
you could see if the System's own Software Update, located in Apple
Menu in upper left side of the menu bar in Finder, can locate some.
If you perform a new install and did not save all the bits as downloaded
from when they were more current, some updates to original media that
formerly were online and available as download (step updates, not full
upgrades) you may eventually be unable to upgrade then update an older
OS X system; the remainder of the later or last fixes were in the update.
So, if you have an old G4 PowerPC Mac computer running, say Tiger 10.4.3
and thought to use some software intended to run in Tiger 10.4.11, then
you'd have to see if Software Update could find the 10.4.11 Combo update.
After updating the main system, other applications may also see a need to
be updated, if they were not already as far as they could go, in their vintage.
iPhoto, and other applications, such as they were, had updates to their main
application. So with iTunes, the last version that can work in a PPC G4/G5
non-intel would be in the last supported OS X, Leopard 10.5.8, and that
version number is iTunes 10.6.3; so you can't visit an App Store or Mac App
Store nor can you run Snow Leopard on a PowerPC architecture Mac.
With the intel-based Mac, and Snow Leopard, you can access the online
Stores to include recent Mac Apps, App Store, iTunes Store, etc. A light
version of early iTunes (see iTunes Player) can be seen, and their Radio
still plays free music channels. I have several older pre-Intel Macs...
The matter involves the vintage of the device, the system, and limits of the
old vintage/obsoleted configurations where both are interdependent.
Not sure if this helps, but more of a history lesson may be read if you look
into everymac.com and compare models, build years, and other specs...
If you need some feature or function not supported by vintage hardware or
vintage software, or a newer web browser, you have to look further. A fair
browser can be found in TenFourFox. I use it daily in a PPC G4 MINI 1.5GHz.
with Leopard 10.5.8. Plus others. To go further, look into an Intel-based Mac
such as MacBook2.1 & then buy the Snow Leopard retail DVD for about $20.
Hopefully this helps somewhat...
Good luck & happy computing!

How to update adobe flash player with os10.6.8

how to update adobe flash player with os10.6.8

You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US which also covers ‘blocked plug-in’.

How to update the posted documents with Business Area wise

Dear experts
Please suggest me how to update the posted documents with Business Area wise
Ajeesh.s
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Nov 2, 2011 2:26 PM

Hi,
Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
Hope that helps,
Rod West

How to update a dbf file with gui_upload???

hi friends,
i would like to know how to update a dbf file with gui_upload???
as i hve already know that it's easy to convert dbf to tab formatted text fle and thn upload it.but i want the direct uploading way.i don't let my user's bsy with converting existing dbf to txt.so pls help me asap!!!!!i will be thankful to you!!!!!

its very easy you can search other forum!!!

Error message after update while creatin equipment with BAPI

Hi All,
I'm creating equipment master record with BAPI 'BAPI_EQUI_CREATE'. After commit I receive the following error message in my inbox -
Update was terminated
System ID....   ***
Client.......   ***
User.....   ***
Transaction..   Z***
Update key...   4AD49ADAF8E13020E10000000A701B19
Generated....   15.10.2009, 16:44:33
Completed....   15.10.2009, 16:44:33
Error Info...   Error while determ. loc. crcy: exchange rate type date from to
Who knows what's the reason and how can it be fixed.
Thanks in advance,
Kind Regards,
Nikolai.
Edited by: Nikolai Gurlenia on Oct 16, 2009 2:18 PM

Hi ,
Try to run the transaction and post the record manually and see how it behaves.
Contact your functional consultant and check with them if they recently made some config changes
Thanks
Ramya

How to update loading point using a BAPI

Does anyone know how to update loading point in a delivery using a BAPI / function module like BAPI_OUTB_DELIVERY_CHANGE. We could populate loading point in the structure for function module ws_delivery_update2. But it does not update the loading point.
Thanks
Edited by: Satyanarayana Tiruveedhi on Mar 13, 2009 6:11 AM

Paul, I don't know if the person I'm trying to advise (who uses a Mac) will be able to do as you suggest. However, I thought this would be an interesting exercise for me to try myself just to see if I can get it to work.
I tried your suggestion on all three of my devices, with no success (PAP2T, SPA2102, and SPA504G)...?
Once I have uploaded the .bin file(s) to my web site, are you saying that the only setting change I need to make is to just enter the exact path to the uploaded file in the field "Upgrade Rule" ? This doesn't seem to enable the upgrade procedure on any of my devices that I tried it on (even after a manual power off/on reset). Upgrade Enable is set to "yes" (the default).
P.S.
My original path was using https://. So, I just changed it to http:// on the spa504g, and this time the LCD display has the message: "Upgrading Firmware, Please do not turn off power...". Problem is, all my registration lights stay green, and no lights are blinking to indicate an upgrade is in progress. Then after a few minutes, or so, the LCD display returns back to normal display (Upgrade message dissappears). All is normal, but spa504g did not do a firmware upgrade....?
Actually, my spa504g already has latest firmware at 7.5.3. So, I'm trying to downgrade back to 7.5.2b, just to test out this procedure.
Message was edited by: Jeff Bourgeois

How do I configure clearcase access with JDEVELOPER 10.1.3.36.73

How do I configure Jdeveloper version 10.1.3.36.73 (the latest download) to use clearcase for scm? There is no clearcase plugin in the extensions directory.
I am currently evaluating Jdeveloper for use on a large project, and not having clearcase support is a dealbreaker. I have tried help->update, and it tells me that there are no updates (or, the port it uses is blocked by my company's firewall).
Anyone know where I can get the clearcase extension?
Thanks
Bill

Hi Bill,
Clearcase support is on the update center which can be difficult to access from behind a firewall with authentication. Do you know if this is the case? You can check the proxy settings in Tools -> Preferences : Web browser and Proxy.
If you still having trouble try http://www.oracle.com/technology/products/jdev/101/update/center.xml and downloading the clearcase extension for JDev 10.1.3.36.73 directly. Then you can install it by pointing Help -> Check for updates at the downloaded file.
Hope this helps,
Geoff

IS-RETAIL: How to update custom enhancement field using BAPI?

Hi gurus,
Like ECC BAPI: BAPI_MATERIAL_SAVEDATA,
This BAPI(BAPI_MATERIAL_MAINTAINDATA_RT) is specific for IS-RETAIL to create and update material master data.
But now If I append one custom field "ZFIELD" to end of table MARA, my question is how to update this custom enhancement field(ZFIELD) using BAPI(BAPI_MATERIAL_MAINTAINDATA_RT)
Thanks in advance!

Hi DongHai,
I suggest you create your own BAPI. Just copy the codes in BAPI_MATERIAL_MAINTAINDATA_RT and add your custom fields. If you want to append the data of the custom field in table MARA, first, you have to create a structure table then goto SE11, type MARA and display. Click the APPEND STRUCTURE then choose the structure that you've created. Hope this will help.
Rewards if useful
Regards,
Mark

How to update my iphone through with pc

plz help me.
my question is how to update my iphone 5s through date cable with my pc

Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support

How to update the MDS Repository with new structure over the older one

Hi,
I am working on the Oracle SOA MDS repository and I want to update the mds repository with new folder structure over the older one but I am not able to do this . I am able to update the mds in local system but not able to do this for remote server.
Please help me
SOA 11g : 11.1.1.5

Welcome to the Apple discussions.
These discussions are user-to-user. Apple generally doesn't monitor the discussions.
My Turkish language skills are non-existant, however, you can use this to find an Apple store close to you: http://www.apple.com/uk/buy/locator/ (you choose your country in the locator) . It may be as easy as returning it to a local store. In some countries you have a short time period to return anything bought from Apple (for example, 14 days in the US). If that doesn't work, you want to contact Apple customer service. Unfortunately, this is where I was unable to maneuver through the Turkish Apple site, due to not knowing the Turkish language.

HT1178 How setup and configure time capsule with ADSL modem for WiFi internet

For my first time time capsule 2TB set up,would like to know about configuration time capsule with ADSL modem for use WiFi internet!

You will want to turn off the WiFi on your modem (if there is WiFi on your modem). Connect the TC and the modem together with an Ethernet cable. Then, turn on your TC and set it up to be in bridged mode, connection type 'Ethernet'.

How to update a versioned container with changes in the DB

Hi,
I've reverse engineered a database schema into a container, and then I versioned it as v1.0.
Now, that schema has changed in the database, and I'd like to update the container with those changes, and version it as v2.0.
What is the best way to do it?
Is it posiible to capture only the changed or new items into the v1.0 container, and then version it as v2.0?
Thanks

Check the application in and then check it out
This will take it to the next level of versioning.
However the version will be like 1.1 and not 2.0.
There is a way to make it 2.0 but I do not remember the steps.
Once you check it out it will be identical to 1.0 but the version will be 1.1 and you can make your changes and the next time it is checked in and out it will be set to 1.2 etc.
At this point I have to ask if versioning is realy what you want to do. Don't get me wrong Configuration managment is a great thing. However most people do not understand it or how to use it. And they usualy get themselves in trouble with it. So if you know what your doing with it then go for it.
Hope this helps.
Also once you version your repositry you cannot go back. You are versioned forever.
Michael

How to update an ipod touch with Itunes PC 4.2.1-ios 5or later

my ipod touch is 4.2.1 i would like to update it from that to the newest ios fromat i have tried Ehow , apple support and none work i have the latest version of itunes and no pop up comes and says here is an update how do i manually update my ipod touch 4.2.1 to the newest format using itunes on my PC

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

How to update a table AUTOMATICALY with data from a .txt file??

HI ,
I want to upload data which is in a notepad file and Create a table. This notepad file stores a string of datas. Here, the data comes in to the .txt file every second.
(The data is actually stored into the notepad file when a program is executed in Processing.js software)
Is it possible to do the following using APEX ? ?
1. This table has to be updated automatically once in 2 minutes (I want this completely automatic, no human intervention -- no update buttons)
2. A report is to be created in a apex application with this table, it should reflect the updates in the table every 2 minutes.
Is it possible?? give your ideas.. I want to do this soon for my engineering project :) Any help from you is appreciated. :)
Edited by: user13301695 on 28-Mar-2011 10:09

And how do you expect your database server to access a local file in your machine ?
Is the file accessible from outside your machine say inside a webserver folder so that some DB process can poll on the file ?
Or, is your DB server in the same machine where you have the text file ?
You will have to figure out the file acess part before automating user interaction or even auto-refreshing.

How to update configuration in SO with BAPI: BAPI_SALESORDER_CHANGEBOS

Similar Messages

Maybe you are looking for