How to update CU1 & CU2 to SCCM 2012 R2

I Install SCCM 2012 R2 then I install CU1 immediately. After about 2 months, I install CU2 in Primary Site.
Now I found some bug, but it should be fixed by CU, then I found this is because I didn't push CU to client.
So I have some questions about Update CU
After Install CU2, I find KB2970177 in server, click "about CM", show the version is
5.0.7958.1303, but I click the properties of primary site. the version is
5.00.7958.1000. Why? Did I finish the Update in primary site?
If I only install SCCM 2012 R2, can I install CU2 without install CU1 first or I must install CU1 before install CU2?
How to deploy CU to Client, I found the package of CU client update. But can I create applications to deploy? or Use software update or compliance? If have some post about these?
I use default Configuration Manager Client Package to do the OSD, can I create new package with CU2?
Thanks in advance!

Check out this blog:
http://blogs.technet.com/b/ryanan/archive/2014/01/31/applying-a-configmgr-hotfix-during-the-client-installation-of-an-os-deployment.aspx
You essentially can create a new client package with the client hotfix files.
Then adjust your Setup Windows and ConfigMgr TS step by adding the appropriate patch command to the properties section.
I mentioned this in a blog I did about applying R2 CU1. Same process applies with CU2 of course.
http://damonjohns.com/2014/04/08/applying-the-adk-8-1-update-and-cu1-for-system-center-2012-r2-configuration-manager/
Cheers
Damon

Similar Messages

How to update Office 365 using SCCM 2012 R2?

Hi,
I am using SCCM 2012 R2 and Office 365 ProPlus.
At products list (Software Update Point Components Properties) there is not Office 365.
Office 365 automatically updates from Internet.
I need to know the following:
How to disable Internet automatic updates at Office 365
How to deploy updates for Office 365 from SCCM.
Thanks in advance!

Funny thing you can't deploy those updates via WSUS and/ or ConfigMgr. See for more information:
http://blogs.technet.com/b/office_resource_kit/archive/2014/01/21/managing-updates-for-office-365-proplus-part-1.aspx
Also, make sure to read part 2 as it provides dome guidance on controlled testing of those updates.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
Below are the Windows 8.1 client IP Configuration
C:\Windows\system32>ipconfig
Windows IP Configuration
Wireless LAN adapter Local Area Connection* 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wi-Fi:
   Connection-specific DNS Suffix . : home
   Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
   IPv4 Address. . . . . . . . . . . : 192.168.1.5
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
Tunnel adapter isatap.home:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
   Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
   Default Gateway . . . . . . . . . :
Tunnel adapter iphttpsinterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
   Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
   Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
   Default Gateway . . . . . . . . . :
Below are the IPConfiguration details for Direct Access server
C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
   Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
   IPv4 Address. . . . . . . . . . . : 10.192.1.25
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
   Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
   Default Gateway . . . . . . . . . :
Tunnel adapter 6TO4 Adapter:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter IPHTTPSInterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
   Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
   Default Gateway . . . . . . . . . :
ipconfig exited on MURA01 with error code 0.
Below are the IPCONFIG Details for SCCM Server:
C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
   IPv4 Address. . . . . . . . . . . : 10.192.1.30
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
ipconfig exited on sccm01 with error code 0.
What will be the IPV6 values to configure boundary?

Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 R2 updates - CU1, CU2, MDT 2013

Hi All,
Looking at upgrading to CU1 & CU2. Are there any know issues or prerequisites I need to look out for? Is it worth upgrading?
Also I see MDT 2013 is available. Is it worth upgrading from 2012?

Hi,
There is a known issue described in "Description of Cumulative Update 2 for System Center 2012 R2 Configuration Manager". You could have a look.
"The SQL update part of the cumulative update installation process may return a warning message if you manage mobile devices by using Configuration Manager and Windows Intune. This message does not stop the installation process. However, additional
steps will be required to make sure that the site database is fully updated."
http://support.microsoft.com/kb/2970177/en-us
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How does WSUS work when an SCCM 2012 R2 server is newly installed? Should WSUS be installed and configured on same server?

Let me clarify.
We had a functional WSUS server delivering our updates to ours workstations. The location of the WSUS server was pushed out by Group policies.
Later, an SCCM 2012 R2 installation was installed. The original WSUS server was removed. Now WSUS type services appear to be broken.
I tried to start WSUS on the SCCM 2012 R2 server and it does not start. (I assume its not configured).
I want to get WSUS running again but am not sure how to do this safely in conjunction with our SCCM 2012 R2 installation. Do I just reinstall WSUS on the SCCM server and configure? Or is there other preferred methods?
I was not involved in SCCM's installation, so I do not know what was done.
Geoff.

Update functionality is provided via the Software Update Point
https://technet.microsoft.com/en-us/library/gg712312.aspx
... which requires WSUS to be installed - it basically takes control of WSUS.
Any existing group policies defining WSUS servers should be removed so that the SCCM client (which I assume is installed on computers already) can configure accordingly. Otherwise you will have group policy and SCCM client over writing one another to configure
the update server

Software Update Compliance Report in SCCM 2012

Hi Everyone,
My question is in sccm 2007 we generate the compliance report based on update list without downloading the patches just adding the same to update list, However the update list is being replaced by update group in sccm 2012, How can we achieve the same
in sccm 2012 or do we need to build the custom report if yes please let me know.
Thanks In Advanced
ashu Maheshwari

Because of the retrograde reporting for WSUS data in SCCM, I have the "send info to WSUS" checked on the SUP so I can view data in the old WSUS console. By comparing what computers need how many patches and using the reports in SCCM, you can see massive
discrepancies in both how many computers need patches and how many patches each computer needs. For example, WSUS will say ComputerA needs 10 patches and SCCM will say it needs 6, or whatever. As far as these two points go, WSUS is far more accurate.
I first noticed this months ago.
I think this is not a matter of how the SCCM queries are written, but because SCCM is far more flaky than WSUS. To me, WSUS is like a good reliable run of the mile car and SCCM is like a race car--powerful but finicky and persnickety. It's harder to get
clients to fully check in with SCCM. SCCM can do lots but my biggest gripes with it are:
1) Clients especially flaky and persnickety, one tiny thing gets out of whack and it won't work
2) WSUS is far more accurate in reporting what patches are needed
3) For WSUS reporting, they took a lot of WSUS-related/patch reporting out of SCCM, towit you can't get the info you used to be able to get without writing a custom report. This is why you can easily find code samples on the net. And along that point I still
can't get report builder to work and I don't have another report tool available to me. I know the SQL code samples I have work because I can run the queries in Mgmt Studio.
Ben JohnsonWY

How to resolve BADMIFS file in SCCM 2012

Hi,
I am trying to resolve Hardware inventory issue on the machines which is not reported more than 10 days in SCCM 2012.
I found there are BADMIFS files created in the below location.
How to resolve the issue on the machines which is under below each BADMIFS folders. Do we have any troubleshooting steps for each folder?

For troubleshooting hardware inventory import, you can check below link
https://sccmfaq.wordpress.com/2013/10/16/sccm-2012-troubleshot-hardware-inventory-import/
For Resolve-cleanup BadMIFs, you check below script
https://gallery.technet.microsoft.com/scriptcenter/SCCM-2012-bad-hardware-0bec0ee0
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Cumulative Update 4 installation for SCCM 2012 R2

Hi all,
This is my first time installing a CU update on SCCM 2012.
We have an environment with 15 Servers, 1 is a Primary and the other are Site System Servers.
Would I need to install the CU4 update only to the Primary server? or would I have to deploy the CU4 to the other 14 Site Systems Servers.
I've been reading the following
http://support.microsoft.com/kb/3026739
http://dekeukelaere.com/2014/01/30/implementing-configuration-manager-2012-sp1-cumulative-update-4/
http://blogs.technet.com/b/configurationmgr/archive/2014/01/29/now-available-cumulative-update-4-for-system-center-2012-configuration-manager-service-pack-1.aspx
And also if they don't have CU3 on them would I need to do that first, or would
CU4 encompass previous updates.
Cheers for any help on this matter.

When they're only site systems with a role installed than those roles will be upgraded with the primary site installation. Here is one of the many nice posts about the installation process (and order):
http://www.scconfigmgr.com/2015/02/03/install-configmgr-2012-r2-cu4-in-your-hierarchy/
Also, you don't have to install CU3 first.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to stop Application deployment in sccm 2012?

Hi All
If a application is wrongly deployed to wrong collection in sccm 2012
how to stop that and where to change settings like we used to do in sccm 2007 we can
stop it by program properties.

You have kind of the same feature with Applications in CM2012. You can just right-click an Application, and select "Retire".
That will change the status of the Application from "Active" to "Retired", and should prevent installations. When you've fixed the problem, you can just "Reinstate" the Application again, and everything should be back to normal.
But I totally agree with Jason. Make sure you do the proper testing, so you won't have to do this at all :-)
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Why do some Security Updates get flagged by SCCM 2012 as "Not Required" when the Bulletin ID states they are?

Hiya
We've just pushed all updates from the March patch Tuesday Security Bulletin to our test Workstations/Servers (using SCCM 2012 R2)
One of the patches (MS14-013 - KB2929961) hasn't applied to a selection of 2008 R2 and 2012 Servers, but according to the Bulletin notes for this it is applicable to both. It has applied to my Windows 8 boxes.
The servers don't already have this applied, its not a superseded update and SCCM has flagged this as "Required" for x64 versions of Windows 7, Windows 8, Windows 8.1 but "Not required" for any servers.
Bulletin ID states its applicable to all except Itanium based editions - https://technet.microsoft.com/en-us/security/bulletin/ms14-013
If I download the update and try to run it manually on the servers I get "The update is not applicable to your computer"
So it looks as though the WUAgent and SCCM compliance are reporting correctly, but that the Bulletin ID isn't entirely correct??
Has anyone else found this? We use the Bulletin IDs for monthly meetings on what we're patching and what system it will affect so causes a lot of confusion with system owners when a patch doesn't apply that they're expecting to get applied.
Thanks!

Hi,
Without any indepth investigation if I am not mistaking the update is for Directshow and that component is installed with the Desktop Experience on the server OS's, and therefor the update is not applicable on the servers..
Could that be the case?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

How to deploy .msp files through SCCM 2012

Team,
Can you please help me to deploy .msp files through SCCM 2012?
Regards,
Mahadev Nitture

I tried to search and got few things but didn't understand to proceed with.
Please help me with this.
Regards,
Mahadev Nitture
You can use a typical/standard application deployment method (just a minor change because of MSPfile).
Here are some guides, for typical application deployment:
http://technet.microsoft.com/en-us/library/gg682159.aspx
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_7075.html
Familiarise yourself with these methods, then return to the example suggested by Torsten for specific steps for MSP:
https://social.technet.microsoft.com/Forums/en-US/3dac27fd-ce4f-4d3d-946b-d08d4c7f5af5/best-way-to-deploy-an-msp?forum=configmanagerapps
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to manage VPN clients in SCCM 2012

Hi,
In my environment, I have multiple clients over VPN in multiple sites,
now I have problem, I how can I manage those clients for VPN, coz n CM 2012 I have to give boundary group and n boundary group have to give the site server references, and I have only one IP subnet in whole environment, but from that subnet, some clients
are from A site, B site and C site, now can you tell me how to manage them,
How to configure DP for them??
How they can get correct MP?
Sharad Singh | My blogs: SharadTech | Twitter:
@SinghSharaad | | Please remember to click “Mark as Answer” on the post that helps you.This can be beneficial to other community members reading the thread.

Jason,
I have only one IP subnet means I have only one IP subnet for VPN clients n all environment, all clients from all sites which are connecting with VPN they will fall on that VPN IP subnet.
other than have LAN/WAN link for all sites, which I have already configured according to Sites/DP and there s no problem, every thing is working fine.
but for VPN i have only one network which is worldwide, and that network used by all sites, this is the problem, How can I manage that network, and where should I add for boundary/DP for site references???
Sharad Singh | My blogs: SharadTech | Twitter:
@SinghSharaad | | Please remember to click “Mark as Answer” on the post that helps you.This can be beneficial to other community members reading the thread.

How to delete disabled users in SCCM 2012

Currently we disable user accounts in AD and then move them to a different OU which they stay for 6 - 12 months.
How can I identify those disabled users accounts and delete them form the SCCM console?
Thank you

Thanks for the response but there wasn't a process in place so was tasked with a one time cleanup and we don't have Orchestrator in place.
I ended up doing the following:
1.Use a powershell script to output all disabled user ID's
Get-ADUser
-Filter 'Enabled -eq $false'
|Select-Object
samaccountname
2. Setup a Query on a collection to gather all these users ID's
select * from SMS_R_User where SMS_R_User.UserName in ("User1", "user2")
3. Delete the users in the collection

How to launch IE window via SCCM 2012 R2

Hi,
we need to open / launch Internet Explorer windows at a specific time everyday on the computers of a specific collection.
How it could be achieved? Is this possible via SCCM? or it could be done via GP? What is recommended? Or with MS Orch?
Please assist.
Regards, Syed Fahad Ali

You could do this with ConfigMgr ...
You can launch IE like this %programfiles%\Internet Explorer\IEXPLORE.EXE http://www.cnn.com
Just create a batch file with all pages you'd like to open and deploy it with ConfigMgr.
If timing is an issue ... you'd probably be better of with a scheduled task (which you can also implement using ConfigMgr).
Tim | Blog |
@Tim_DK

How to query requirements of an sccm 2012 application

Dear all
I have some problem to create an OSLanguage or Device_OSLanguage Requirement using powershell script
it seems that the value passed to the script is not assume by sccm because the record is not availble on the console
i tryed with 1033 , en-us and so on with no good result
(the script is running with OS, Space Disk...)
so i would like to query the requirement values attached to the existing applications to check it and to retry to use my script with correct i hope values.
cou'ld you help me to resolve this locked problem of my project.
Many thanks
François

Hi
The trick is to create a CustomCollection of ConstantValue, add each ConstantValue to this CustomCollection then add this CustomCollection to the Expression by using the Int64Array DataType.
I did it like this in VB .Net and I'm sure you can do the same in PowerShell:
Dim aobjOperand As CustomCollection(Of ExpressionBase) = New CustomCollection(Of ExpressionBase)
Dim objOperand As ExpressionBase = New GlobalSettingReference("GLOBAL", "OSLanguage", DataType.Int64Array, "OSLanguage_Setting_LogicalName", ConfigurationItemSettingSourceType.CIM)
aobjOperand.Add(objOperand)
Dim aobjLangues As CustomCollection(Of ConstantValue) = New CustomCollection(Of ConstantValue)
aobjLangues.Add(New ConstantValue(CultureInfo.GetCultureInfo("fr").LCID.ToString, DataType.Int64))
aobjLangues.Add(New ConstantValue(CultureInfo.GetCultureInfo("fr-BE").LCID.ToString, DataType.Int64))
aobjLangues.Add(New ConstantValue(CultureInfo.GetCultureInfo("fr-CA").LCID.ToString, DataType.Int64))
aobjLangues.Add(New ConstantValue(CultureInfo.GetCultureInfo("fr-FR").LCID.ToString, DataType.Int64))
aobjLangues.Add(New ConstantValue(CultureInfo.GetCultureInfo("fr-LU").LCID.ToString, DataType.Int64))
aobjLangues.Add(New ConstantValue(CultureInfo.GetCultureInfo("fr-MC").LCID.ToString, DataType.Int64))
aobjLangues.Add(New ConstantValue(CultureInfo.GetCultureInfo("fr-CH").LCID.ToString, DataType.Int64))
objOperand = New ConstantValueList(aobjLangues, DataType.Int64Array)
aobjOperand.Add(objOperand)
Dim objExpression As Expression = New Expression(ExpressionOperator.OneOf, aobjOperand)
objRule = New Rule("Rule_" + Guid.NewGuid().ToString("D"),
NoncomplianceSeverity.None,
New Annotation("Langue du système d'exploitation", Nothing, Nothing, Nothing),
objExpression)

How to update CU1 & CU2 to SCCM 2012 R2

Similar Messages

Maybe you are looking for