How to update deletion status to backend PO

Hi guys,
we are using SRM 5.0 and ECC 5.0 for backend . After we have deleted the PO ,the status of corresponding PO is not updated in backend system. That is to say , the PO in backend is not deleted and the PR is not opened again..
any guys can help us ? thanks in advance.

Hello,
usually SRM functions a little bit others... PO can be deleted in backend then the corresponding Positions in SRM become Status 'Following Document deleted'.
Your functionality possible with the additional Job, which will delete PO's in Backend.
Regards,
Konstantin

Similar Messages

How to update the status of Outbound IDOC in case of error

I want to know about how to update the status of Outbound IDOC in case of error.
I am using message control functionality here.

HI,
If u r using the standard message and basic type
u can do it in the FM attached to the basic and message type.There u need to write ur own message instead of standard SAP message..chek if there r any userexits available in the FM..where u can overwrite ur own message ..
If u r using the Zmessage and Zbasic type
then u need to declare an internal table of EDIDS structure and then append ur message to the internal table..
idoc_status-docnum   = idoc_contrl-docnum.
idoc_status-msgty    = <message type>
idoc_status-msgid    = message-id.
idoc_status-msgno    = message-number.
idoc_status-msgv1    = message-message_v1.
idoc_status-repid    = sy-repid.
idoc_status-status   = <give the error status>.
APPEND idoc_status.
Reward if u find useful
Regards,
Nagaraj

CommPr01-TC { how to update product status(locked,Archived etc) via Program}

Hi all,
TCode: Commpr01 ( how to update material product status as Locked or Archived Via report program. Can any one suggest me what FM's
i have to use and what inputs i have to pass. I already checked with "COM_PRODUCT_MAINTAIN_STATUS" it is not working properly.
May be i passed wrong input to that function module i think off.
Thanks,
Anbusundaram A

Hi,
Its good that u pasted the complete log file. In your environment you have to run this upgrade tool only once from any of the middle tier.
And with respect to your error that u got in precheck is quite simple. All u have to do is just run this script from by connecting to portal schema using sqlplus.
Run dropupg.sql
Location-------- /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/dropupg.sql
Later you re-run the upgrade tool and let me know the status.
Good luck
Tanmai

How to update my status here on the Adobe Forums?

I am here on this forum and on the left it says, "You haven't updated your status". OK I click on the link and off it sends me to where I should go to do this but I can not see anywhere as to how or where to do this. I do a Ctrl-F for a "Find" and type in the word ''status' should my eyes be failing me as to where this can be done, but nothing shows up. So I'm lost here.

Hi Thanks to all of you. I agree this isn't FB. so I was wondering what they meant by Status. I was hoping that once there I would know whether I'd want to or not, But if it is a thing similar to FB or if it has been disabled then problem solved :-)

How to update user status in the QM notifications

Dear Experts,
PLz tell how to update/change user status in the QM notifications..I have maintained the user status profile and assigned the same to the notification type,but user status are not getting updated in the notifications..
Thanks in advance
Ankush

Hi,
SPRO - Quality Management - Quality Notifications - Overview of Notification Type.
In that select the concerned notification and click on the status profile and there you can assign the status profile for the concerned notification Type.
There will be two types,
status profile for notifications and status profile for tasks, assign as per the requirement.
Regards,
Naveen.

How to update task status from custom task in state machine workflow

i m using custom task for state machine workflow
i am using
if(this.onTaskChangedSupervisorAction_AfterProperties.ExtendedProperties["Workflowstatus"].ToString().Contains("Approved"))
if above is true moving forward its working fine but i want to update the status field of task as i can update the title and due date for the task but how can i change the status once approved it
should show the status as approved it's only showing in progress
this.CreateTaskSupervisorAction_TaskProperties.Title="supervisor task"
MCTS,ITIL

If your task shows In Progress state then I think you need to look at your workflow and make sure you are using Complete Task activity and if you are already using Complete Task Activity then verify the Correlation ID. Ideally you are not required to set
this value in workflow. You simply use the Complete Task Activity.
If you are running into issue where your workflow is staying in In Progress state even after the task is complete then you can look at the following blog post.
How to programmatically complete Approval workflow task
Amit

How to update resource status to productive when SFC start

Hello,
When SFC X starts at resource A, how can we make status of A to Productive automatically?
I've heard that the operator starts some work. Then, the resource becomes productive.
But I can't do that. Is there any setting or operation?
Best Regards,
Takahiro Uesugi

Takahiro,
Not sure if I understand your question - so if the info below does not answer it, please specify the request with more details.
Status of Resource is defined in Resource Maintenance, "Status" field. If Stutus = Productive and no SFCs are in work at the Resource, then all time is recorded against Statndby column of Resource Utilization Summary Report. As soon as any SFC is started at the Resource, the time is tracked as Productive. If the status is changed to any other value, then no matter if there is active SFC or not - the time will be tracked against the corresponding column in Resource Utilization Summary Report.
Regards,
Sergiy

How to update Activity Status in PS

Dear Sir,
We have defined various Activities under a WBS Element . Instead of Updating the Status of the Activity from the CJ20n screen , We want to confirm the Activities using a Z program ( utilizing BAPI etc ... ) .
Kindly guide us about the steps need to be followed for the same pl .
With Thanks and Rgds
S Agarwal

you can use BAP to confirm, write LSMW via transaction CN25 or write a Z program via CN25 or CN22 to update status etc

How to update user status in CRM Order depending the delivery status in R/3

Hi All,
In my scenario the partial delivery allowed to the customer while creating the CRM Order. But as per my requirement the status should be updated when the complete order and delivery takes place.
Let me describe you clearly:
Suppose I want to deliver 5 quantities products to the customer but initially I want to deliver only 3 quantities and rest 2 quantities later. When I do the post goods issue of 3 quantities in R/3 system the status should not change in CRM system. When I will do the rest 2 quantities in post goods issue in R/3 then the user status should change in CRM Order. But in current when I do the delivery of 3 quantities the user status is changing in CRM Order.
I need the user status should change in CRM only when the entire deliverytakes place in R/3.
Thanx
Chinmaya

Whenever an item is fully delivered, by standard, a "Completely Delivered" status will be updated into the item. If the I suppose by referring to that you will know an item is partial or completely delivered. When all items in the order is fully delivered, the standard header status will set to "Completed". So, you will also know if the whole order is partial or completely delivered.
If you want to add a user status, the simplest, you can make use of the ORDER_SAVE Badi. Just call the function CRM_STATUS_MAINTAIN_OW. You can update both header and item status.

How to Update&Delete a field in a record of tablecontrol in screens

Hi,
I have one requirement in table control of Modulepool Programming. I want 2 put 2 pushbuttons as "Delete","Update" in Tablecontrol Screen.when ever i select a record that time i want 2 delete that and i have 2 update particular value on tablecontrol itself and that reflects the custom table

Moderator message - duplicate post locked
Rob

How to update the status of Credit memo request as "Close" by putting reason of rejection

Dear All,
Our requirement is to close credit memo request, We already cancelled the subsequent document i.e. billing. In credit memo request we are trying to close it by putting "Reason of Rejection", but instead of closed is coming as " Being Process". I already did the required configuration at Item Level for G2N in VOV7, but still the status is "Being Process".
Please let me know if I m missing config.
Thanks,
Sumeet Sah

Hi
Check this below link. I had faced this issue years ago and got a strange solution which is still applicable.
Open status of Credit Memo after rejecting all line items
Thank$

Reg How to Update DeleteFlag Image (Default N) Value in Table

Hi Friends,
I have One Column Delete Button(Style Image) in Advanced Table So Based on That Delete Button Click I need to Update Value in Table(DeleteFlag =Y )
So How to Update Value in Table(Data Base).
Select empno,deleteflag from Emp where empno=:1
I attached this EmpVO to Advance Table So How to update Delete Flag(Y) Value.
Hint:::::: Iam Using Packages(Pl Sql) And Read Only VO's Only.
With out Using Package & EOVO Update is Possible In OAF.
Thanks & Regards
San

Okay ,
Here we go ,
Step 1 : Select the item in the table ( image) and go to property inspector and select fire action , give some name for Action .
Step 2 : Capture the above event from your controller class ( ProcessFormRequest () ) and Implement SQL statement
Use below code :
Import the followings
import java.sql.Connection;
import java.sql.PreparedStatement;
if ("YourEventID".equals(pageContext.getParameter(EVENT_PARAM))) // replace your event id created above
Inside if statement Add code to handle sql statement .
try
String Query = " "; // write any single SQL statement along with bind parameter inside " " , in your case it should be update statement
PreparedStatement stmt = conn.prepareStatement(Query);
stmt.setString(1,Paramtervalue); //set your bind parameter value here ( where clause paramter )
catch(Exception exception)
throw new OAException("Error in Staffing Query"+exception, OAException.ERROR);
Keerthi
Edited by: keerthioaf on Nov 27, 2012 1:47 AM

How to change the status of updated record?

Hi All,
how to change the status of updated record?
new record should be active version(X) and old version will be deleted.
Plz suggest..
Thanks in advance...

Steve,
In the actual question, you mentioned that the old record needs to be deleted and hence the solution provided.
Now, you are talking about field. May I know which field are you talking about??
Jst get in to ABAP Editor and try debugging the code with the solution provided and let us know if that is working fine or not.
Also, I recommend you to take a look at the transaction ABAPDOCU. There you wil find hell lot of examples explaining all the scenarios. You will get a good idea .
Please check that and try to implement it yourself. You will be able to make it after doing mistakes.
If you stuck up again after many attempts, paste your code here. We will help you out
Hope you got my concern.
Thanks,
Babu Kilari

How do i delete my credit card info from my phone. because it wont let me update or download apps because i only have 50 cents on the card

how do i delete my credit card info from my phone. because every time i try to update or download apps it wont let me because i only have 50 cents on my card. so i need help now before i smash this ****** *** phone and go with a galaxy s5

This does not make much sense.
Please explain.
Are you getting an error message? What does it say?

When trying to update apps from iPad and iPhone a previous one time users email keeps coming up. How do I delete their information?

When trying to update apps from iPad and iPhone a previous one time users email keeps coming up. How do I delete their information?

delete off any apps that are asking for the wrong apple id and download/sync them over from the correct one

How to update deletion status to backend PO

Similar Messages

Maybe you are looking for