How to update drivers for Lenovo IdeaCentre C560?

Hi all,
I have PC Lenovo IdeaCentre C560 with Windows 8.1.
There is installed LSC (Lenovo Solution Centre), which has "System" section and inside it is "Lenovo software update" block, where LSC advices me "Go to Lenovo's website to update the Lenovo software on your PC".
But there are thess problems:
There are 20 drivers for C560 for Windows 8.1 on Lenovo website.
Which of them I have to download and install?
I have tried at my Device Manager to verify for all of my devices to be last update (it was terrible work) and I always got information that my driver is up-to-date.
Somebody have told me that LSC is not SUITABLE for C560 machine.
So I have these questions:
Does anybody have installed LSC on his C560? A does it work fine (so it find and install always new driver) or he only get abstract ionformation Go to Lenovo's website to update the Lenovo software on your PC?
Are there other possibilities to regularly update drivers then LSC?
Thanks.
Solved!
Go to Solution.

Dragnote,
maybe it was caused my terrible English, so I will try to explain relevant aspects once again:
1) I bought my Lenovo IdeaCentre C560 (part number: 57322363) on 22th of May this year from "stone" shop, not through internet. The Web site of this shop is www.mironet.cz, but there is not my PC there in actual supply, because the shop stopped to sell this model. But the parameters etc of this model is on Mironet's Web site here:
http://www.mironet.cz/lenovo-ideacentre-c560-23quo​t-fhd-intel-core-i54570t-36ghz-8gb-1tb-dvdrw-nvidi​...
but is is in Czech language.
2) My Windows are in Czech language, so I will translate it for you into English and therefore some informations/messages can be not fully exact. OK?
2) The LSC program was installed on my new PC with MS Windows 8.1 64-bit. I was only wanted to USE it! And why not. I got with PC only very slim User's Book, where was nothing much usable. And nothing about updating system and drivers, nothing about backuping etc. So I started to use SLC, because it was preinstalled there.
3) Problems of detect WHICH driver I have to update and HOW to do it:
3a) I tried three programs for detecting of my not-to-updated drivers: SLC, Detective and Smart Driver Update with these results: SLC only advice me to go to Lenovo website, Detective and Smart Driver Update gave me list of my not-to-update drivers, but the lists were rather different.
3a) The  link I provided, http://forums.lenovo.com/t5/forums/replypage/board​-id/ideaCentre/message-id/9220, lists 20 drivers and all of them were released in period between 16 Oct 2013 and 01 Dec 2013, so I have used abbreviation "end of last year", but you are right - mostly of them are from 16 Oct 2013.
3b) I TRIED to compare their date of released with drivers installed on my PC, but I have two basic problems:
3b.1) How to identify WHICH driver on my PC corresponds to drivers on Lenovo web site?
The names are NOT the same. For example: on Lenovo Web site is "Realtek Audio Driver V6695 for Microsoft Windows 8.1 (64-bit) - Desktop", released 17 Nov 2013, version: 6.0.1.6695. Then I found on my Device manager "Realtek High Definition Audio". So my question already is: "Is it the corresponding driver or not?".  But let us say: it is.
So, now we can continue with next information on my driver : date of release is 15 Nov 2013, version: 6.0.1.7093. So I am not sure if these two drivers (one on Lenovo Web site, second on my PC) are the correct PAIR. There is antagonism between date of release and the version number.
3b.2) How to update, when I already "decided", that my driver is not-to-updated and therefore I need it to update?
I launch my Device manager, then I choice some driver, then I click on "to update driver software" and there display two possibilities: find driver on computer, or find driver on Internet. So I click on "Find driver on Internet". Then I wait about 10 seconds and then I ALWAYS get the SAME information: "The driver of this device is up-to-date"
This "optimistic" message I received for about 30 of my drivers. So there are three possible explanations how to explain it:
1) LSC, Detective and Smart Driver Update lie to me, when they tell me "You have some not-to-update drivers", because in reality all of my drivers ARE up-to-date.
2) I really have some not-to-update driver but because I cannot address correct WHICH driver is not to-up-date, I try wrong driver to update. Wrong, because it IS up-to-date.
3) I identify the correct not up-to-date driver but the choise "find driver on Internet" open finding of this procedure in non-Lenovo Web sites.
And maybe you are right when you write: "Sometimes, on a new system, Lenovo installs drivers that are "newer" than the drivers listed on their site. Don't worry, keep the newer drivers."
I apologize very much,but I am not able directly to use the information from you.
I never updated drivers on my old PC (I had it 12 years!), so I have no experiences what happens when I replace my NEW (up-to-date) driver with some OLD driver installed from Lenovo Web site. I am affraid that my keyboard, mouse, screen etc will stop its function.
When I bought this Lenovo machine, I to myself have told that I will keep my drivers up-to-date, but I do not how.
Mirek

Similar Messages

  • Update drivers for NVIDIA GeForce GT 330M

    Need the updated drivers for NVIDIA® GeForce® GT 330M that comes with my Vaio Z  VPCZ128GX , the drivers in eSupport are from 2010, and nVidia software does not detect the 330M card
    VPCZ125GX

    I've updated my VPCZ1 to 340.43 drivers but it still won't accept the transition to Windows 10, seems like they just want to find any excuse to back out of their promise of a free upgrade for windows 7 users. For anyone who is editing .inf files and still not able to get it to work, you need to update your intel drivers first. The process is a bit awkward, I tried to update the Geforce with a few pre-modded drivers, using the device manager. It would always freeze during installation or ask to reboot and start in 800x600 resolution. I also tried the latest intel drivers but was unable to update them at the time, so I gave up on the idea for a while. Later, I ran into trouble running GTAV, the game would start fine but suddenly crash to desktop while loading. I remembered how the latest driver broke the intel driver, so I rebooted with the laptop in "stamina", installed the latest compatible onboard graphics driver and rebooted in "speed" mode, which incapacitated the 2010 nvidia driver so I had a new "unknown device" under "display adapters" in the device manager. I pointed it to the 340.43 drivers (latest driver I could find for 330m which still uses inf files) which I modified earlier and success, GTAV now runs. Editing inf files is surprisingly simple, just find mention of "330m" in one of the inf files (which are lists of subsys numbers) and replace the subsys number with the one from your card in device manager when using the 2010 drivers. (there are alraedy a lot of them in the inf, I guess it's true that no two 330m are the same) I've always left it on "speed", ever since it booted with the new drivers, The GPU is easily underclockable using Precision X for more battery life. http://i59.tinypic.com/swd3lx.jpg Only side effect I know so far is that the screen rotation doesn't work, although I never tried it with the old driver combo.

  • Updating Drivers for video card?

    I have a G5 Quad with an Nvidia Geforce 7800 GT video card (installed by Apple at the time of purchase). I wanted to see if there were any new/updated drivers for my card, but when I go to Nvidia's website the card is not listed, nor are any Mac drivers that I can see. I checked Apple's site, CNET Downloads, and Google, but I'm coming up with nothing.
    How are the drivers for video cards updated? Are the drivers included in various OS updates? Am I just looking in the wrong places?
    Thanks.

    Thanks, maclover. And thanks for the warm welcome
    My problem is specific to a piece of software... I'm using Lightwave, and recently added FPrime to Lightwave's functionality. FPrime is a third party plugin, and is widely used in the Lightwave community.
    The problem is that if I open FPrime before OpenGL renders the objects in a scene on screen FPrime crashes (hard)... it's like a kernel panic and my only option is to shut down and reboot. However, if I let OpenGL render the objects first then FPrime opens fine.
    I'm an active member of the Lightwave community, and I've been in contact with the maker of FPrime regarding this issue. My question about drivers stems from the fact that usually if something like this occurs then it may be related to the need to update card drivers.
    Thanks agian.

  • How to update apps for my iPOD

    How to update apps for my iPOD

    On the iPod go to App store app and tap Updates in lower right. Then tap on Update  all or update individual ones.
    Note that if yo do not have iOS 6, you may not be able to update the the latest version of some apps since some require iOS  4.3 or higher. some iOS 5 or higher or some iOS 6.

  • How to install drivers for ati radeon 3200?and how to config xorg.co ?

    how to install drivers for ati radeon 3200?and how to config xorg.conf?

    mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
    Hello
    I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
    #pacman -Sy
    #pacman -S -l | grep -i catalyst
    #pacman -S catalyst catalyst-utils
    After installation reboot your machine in runlevel 1. (single mode).  Ensure "fglrx" module is loaded correctly using
    #lsmod | grep -i fglrx
    If the resultant output have "fglrx" part  the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
    #cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
    Then issue
    #aticonfig --initial --input=/etc/X11/xorg.conf
    This will create a new xorg.conf file. Now we can test our confign.
    #telinit 3
    I am using runlevel 3 to avoid graphic messup!!
    issue
    #gdm
    If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
    To know your ati driver is working correctly issue as root
    #fgl_glxgears
    If gears are rolling happily it seems correct. You can also know more about installed ati driver
    #fglrxinfo
    Now the installed driver version is in the output 
    If there is any problem try following
    ##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
    yes video playback is choppy until i ran :-
    sudo aticonfig --overlay-type=Xv
    Try adding the following to the 'Device' section in /etc/X11/xorg.conf
    Option "TexturedVideo" "true"
    ### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
    mythfrontend --geometry 800x600
    Append the "Device" Section of /etc/X11/xorg.conf file as follows;
    Section "Device"
    Identifier "Videocard0"
    Driver "fglrx"
    Option "OpenGLOverlay" "off"
    Option "VideoOverlay" "on"
    Option "TexturedVideo" "on"
    Option "TexturedVideoSync" "on"
    Option "Capabilities" "0x00000800"
    BusID "PCI:1:0:0"
    EndSection
    Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
    export LIBGL_ALWAYS_INDIRECT=true
    ####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
    ####### as in the following example
    title  Archlinux Ice Kernel
    root   (hd0,1)
    kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
    initrd /boot/kernel26-ice.img
    NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!!  ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
    Wish U good luck
    mvdvarrier

  • How to update firmware for SSD Toshiba Air 2012

    How to update firmware for SSD  Toshiba THNSNS128GMFP ??
    My disk see on system as  SandForse 200026BB  33Kb

    https://discussions.apple.com/message/22108992#22108992
    https://discussions.apple.com/thread/5120950?start=0&tstart=0
    https://discussions.apple.com/message/22649139#22649139
    https://discussions.apple.com/thread/5300125?tstart=0
    Seems to be a real issue. Here's to hoping Apple will address this issue sooner rather than later.

  • How to make root for lenovo a3500

    Hey Guys
    I need to know how to make root for lenovo a3500
    I tried Kingo Android Root but it didn't do anything
    Need help guys and thanks

    I haved to try vroot, but unsucess. I haved upgrate android 4.4.2 and try used kingoroot and vroot unsucess. Who do try sucess? Help me?

  • HT4623 Hi, I need help on how to update software for my ipad1, can someone help me?

    Hi, I need help on how to update software for my ipad1, can someone help me?

    The iPad 1 can not be upgraded beyond 5.1.1. If you haven't upgraded to iOS 5.1.1, see the info below.
    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • I just purchased a Canon MG5220.  I have installed all of the updated drivers for 10.7.3.  The scanner is working wirelessly, but I can't add my printer.  Any ideas?

    I just purchased a Canon MG5220.  I have installed all of the updated drivers for 10.7.3.  The scanner is working wirelessly, but I can't add my printer.  Any ideas?

    With most multi-function devices, you need to run the printer manufacturer's setup/configuring program first. That will either "Add" the printer directly, or make it discoverable in the "Add-a-Printer" window. Look around, you probably downloaded that program when you downloaded the Driver.

  • Can't find drivers for Lenovo G50-30 for Windows 7 32-bit

    Hi,
     I can't find drivers for Windows 7x32 bit for my new Lenovo G50-30. Looks like Lenovo support doesn't have them. Am I wrong?

    hi ziris,
    Can you try these drivers:
    Chipset:
    Intel® Chipset Device Software (INF Update Utility)
    Bluetooth:
    Bluetooth Driver (Intel, Atheros, Realtek, Broadcom)
    Camera:
    (AVC, Bison) Camera Driver
    If the  above drivers doesn't fix the unknown device under Device Manager, can you follow this guide on how to install the drivers via their Hardware ID or you may want to consider installing Windows 7 64bit (this would be best if you'll be utilizing 4GB RAM and above).
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to get drivers for photosmart 145

    Hi there, I have a Photosmart 145 and my OS is Windows 8. I would like to know if there are drivers for this printer for windows 8.

    Fernan215,
    The short answer is, "No, there are not drivers for this printer in Windows 8".
    The longer answer is, "It might work."
    There are not any drivers for Windows 7 for this little printer, but there is a possible workaround; that same workaround may be effective for Windows 8.  You can certainly try it.
    HP Photosmart 145 - Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection
    Note the caveat:
    Photosmart 130, 145, 230, 240 and 245Photosmart 330 *
    * Available only through Windows Update.
    How does one acquire the driver from Windows Update?  Hopefully, when you run Windows Update the necessary Drivers will be made available in the Operating System.
    ==================================================​=======================
    There are no guarantees, of course; the test is in the attempt.
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • HT1710 how to update drivers

    Hi my name is Jamie and i want to know how to update the drivers on a mac os x lion 10.74

    You don't. Apple controls all of that through Software Update. Doesn't matter if the manufacturer of any component in the system has come out with an updated drive/software for their products. Apple will not allow it to be installed unless they set it up in Software Update.

  • Latest Release 265 Series Nvidia Drivers for Lenovo T61p?

    I ran 3DMark06 this evening on my T9300 T61p and got my usual 4460 Benchmark Score .... however, the benchmark's results page today lists a newer Nvidia Quadro FX notebook series driver available for my WinXP 32-bit system directly from Nvidia.
    At the Nvidia site it looks like it's Nvidia's Verde Notebook Release 265 Series v266.58 WQHL Certified display driver, released in January 2011, which claims support for notebooks using Quardro FX 570M graphics.
    The Nvidia download site is found here:
    http://www.nvidia.com/Download/index.aspx
    I selected from the Nvidia Menu:
    Quadro , then
    Quadro FX Series (notebooks) , then
    Quardro FX 570M , then
    Quardro Graphics Driver , (from a choice of 5 different drivers for different scenarios), then
    Windows XP , then
    English , then
    Search
    Anyone tried this driver setup yet?
    Two (I used to have Five) - T61p 15.4" WS T9300 2.5Ghz units, August 08/08 Builds with FX570M Nvidia Graphics; ... One W520 i7-2860QM w/2000M Nvidia Graphics (most recent acquisition and stupidly fast); .... One - T42 4:3 15" Flexview 1.8GHz with ATI Graphics (still perfect for traveling); ... Two - T500 15.4" units both with ATI HD3650 Graphics.

    My advice is proceed with caution. Latest drivers aren't always the best option. I'd also read the release notes and see what was done to them. Driver updates are often issued for non-issues and won't make any difference. Here is an example of a ficticous update reason.
    Bugfix: driver cause BSOD crash on dell XPS model XXX to YYY when entering hibernation
    Such an update would never be picked up by Lenovo because it won't matter to any lenovo computer, and if you constantly update to the latest drivers, you're not avoiding problems, your making yourself little more then a beta tester running new code that could turn out to be unstable.
    My motto is...    if it's not broke, don't fix it!!!
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • Updated drivers for intell graphics 4000

    I am trying to get OEM (HP) updated graphics drivers for the Intel graphics 4000. Paid money to play a game on my laptop,and had no problem until they came out with a new updated version. Now the game crashes when it gets to checking graphics settings? The games tech support people said I need the new Intel graphics driver. when  I try to update the driver from Intel, it tells me that i have an OEM driver and to check with the manufacture (HP) for an updated driver.
    HP's latest driver is dated 09/2013 intel's latest driver is dated 01/2015 and there have been 2 updates since 2013. Is HP going to put out an updated intel graphics 4000 driver, Please tell me how to override OEM and update from Intel??

    Sorry mate, your gonna have to downgrade your driver in order to get the game running. I too have an Intel HD 4000 however mine is not OEM meaning i can upgrade with intel. Trust me I have overriden this in the past and your display driver WILL CRASH if you attempt it because it can only run HP's modded version. Just run the installer for the old version of HP's driver and run the game afterwards. P.S Sorry, HP have updated my 3000 driver (rare move by HP).

  • What Vaio Models Are The Updated Drivers For Windows 10 Going To Be Compatible With?

    I have a Sony Vaio (Model Number: VPCEJ16FX) and am wondering what models of Vaio will be supported by the updated drivers?

    I understand that Sony is not to support endless models of the computers that have been placed by them out on the open market, however Microsoft itself has found a need to include windows 7 computers within their list of computers eligible for a free upgrade. As such, when Sony tells us that they will not participate in the upgrade, they essentially tell me that if they create a product that fails, that they will not support it at all, and leave all their loyal customers to fend for themselves. I have been a long time supporter of Sony and have unbelieveably been an ambassador for their company, for years since I was a child, I owned Sony Walkmen, minidisc players, DVD players, televisions, ALL OF MY COMPUTERS EVER WERE SONY, sony rewards, sony wheelers (wheel of fortune) club, Countless car stereos, home stereos, Sony dream machine alarm clocks in every room, playstation, PS2, PS3, periferals, cases, Imagestation, Sony eMarker, many of which have failed, and we accepted those failures in fact and still continued on supporting your innovation and knowhow because you continued support or somehow some way still found a way to make things right, KEEPING OUR LOYALTY!!!! And now we find ourselves here, a company that's failing little by little, when I see that they do not support drivers for computers they built NOT THAT LONG AGO, and which Microsoft themselves will support, it makes me wonder. Why should I continue with a brand that keeps facing triumphant failures and doesn't seem to care anymore about the people reliying on what products the company has put out on the market? Is this the beginning of a trend we will see from now on? I REALLY REALLY hope not. You make great products but when something goes wrong if you do not support it and make it right, you're worthless. Why? Because something eventually goes wrong with even the best of things, and you need to learn again how to make things right. Windows 10 has been in the works for some time now, and I know that Sony still had access to developer models for almost a year now, and yet still we have to wait another month. I expect nothing but the best from this company, because they set the standard so high. Glass half full, you built me a fantastic computer that still works great everyday! You need to support and recognise that, use it as a testament, an advertisement that you build great things, keep your flame alive, keep supporting, improving, developing and innovating, and you will find your numbers will turn around. I hope to see some Win 10 drivers, patches, SOMETHING available in the not too distant future that somewhat mirrors what microsoft is ready to support. Thank you. 

Maybe you are looking for

  • Siri and Relationship Editinh

    I can no longer see or edit my contact's relationship for Siri. I had no problem setting it up when I received the iPhone5 six months ago. Please help.

  • Corrupt HD, with Snow Leopard - no installation disk

    Hi, I'm just preparing my 18month old i7 iMac running Snow Leopard to be upgraded to Lion.  A tip I saw said run the disk utility to check your disk prior to upgrading, which I did.  It failed with "The volume Macintosh HD was found corrupt and needs

  • Unlock iPhone 3G by IMEI

    Hello, i have an Iphone 3G and my carrier said that i already can unlock my phone, but itunes show me the message, the sim is not suported. i already restor my phone. how much can it take to the info, go from my carrye to apple? what else can i do? t

  • Using FCP 7 with Macbook Pro Retina Display?

    Hi there I am one of the many editor that won't be moving to FCPX and sticking with FCP 7 for the time being. My question is has anyone used FCP 7 with the new Retina Macbook Pros ? I'm basically looking to see it FCP 7 is useable on the retina displ

  • Cannot print 11 x 17 on HP USB or postscript printer

    I am using using Office, Photoshop CS and Acrobat Professional 7.1.0. Up until recently, I could print pdf files in 11 x 17 or 13 x 19 sizes without problem. Coincidently since my out sourced scanning service began using Acrobat 9.0, I have been unab