How to update firmware for SSD Toshiba Air 2012

How to update firmware for SSD Toshiba THNSNS128GMFP ??
My disk see on system as SandForse 200026BB 33Kb

https://discussions.apple.com/message/22108992#22108992
https://discussions.apple.com/thread/5120950?start=0&tstart=0
https://discussions.apple.com/message/22649139#22649139
https://discussions.apple.com/thread/5300125?tstart=0
Seems to be a real issue. Here's to hoping Apple will address this issue sooner rather than later.

Similar Messages

How to update firmware for HP Compaq DC small form factor

I have HP Compaq dc7700 small form factor, Windows xp pro. It was bought on ebay and works fine except for one thing. The Bios was upgraded but the firmware is not upgrading. the Bios was upgraded to V3.05 but the firmware remains 2.04
I downloaded al the updates and firmware and followed instructions but I seem to have problems updating the firmware. I would like to know how to do this step by step because the instructions I read seems to be missing some steps. my question is how to update the firmware. I did read the instructions but could not get it updated. either updating via windows or in dos, I can't seem to make it successful. There are two error messages,
1. ME BIOS Extension module has halted. Update BIOS or Management Engine firmware if problem persists.
2. Amt mamagement engine is disabled.

HP normally uses the term BIOS to refer to motherboard/CPU "firmware" updates and Firmware to refer to other device "firmware" updates... Below is a list of the two classes of firmware;
BIOS
Business Desktops BIOS Utilities 4.02 Rev. A
Microcode Update for HP 786E BIOS Family Computers with Intel Processors 1.06 Rev. A
HP Compaq Business Desktop ME Firmware Update and Utilities 2.2.30.1046 Rev. A
HP Compaq dc7700p Business Desktop System BIOS for Intel vPro Technology (786E1 BIOS) 3.05 Rev. A
HP Compaq Business Desktop System BIOS (786E1 BIOS) 1.15 Rev. A
Firmware
Western Digital 7200-rpm Hard Drive Firmware Update 3.03E03 Rev. A
Intel PRO/1000 Firmware 1.10 Rev. A
HP Optical Drive (TSST H353B DVD-ROM) Firmware Update BC08 Rev. A
HP Optical Drive (TSST H653N DVD-RW) Firmware Update HB02 Rev. A
Seagate Hard Drive Firmware Upgrade for 500-GB Barracuda 7200.11 HP13 Rev. A
ATI X1600XT Graphics Card Video BIOS Update S3A67124.104 Rev. A
Samsung Hard Drive Firmware Upgrade - SATA Drives 42_51 Rev. A
Please identify the exact device you wish to upgrade/update the firmware to.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How to update firmware for mac os x

I downloaded firmware for my MacBook Pro 2007. Can someone assist me with the installation. The firmware is on my desktop but I do not know which application to open it with? I am confused by all of the files.

Hello Kappy,
Thank you for responding so quickly. I went online to Apple to update my MacBook Pro 2007 (Mac OS X 10.4.11) I have Firefox 3.6.28 as my internet connection. I downloaded the firmware to my MacBook Pro. I opened the Firmware restoration CD download and the following files were there:
IM51_0090_08B.fd
IM61_0093_05B.fd
LICENSE
MB21_00A5_06B.fd
MBP21_00A5_02B.fd
MBP22_00A5_02B.fd
MP11_005C_04B.fd
MP21_007F_02B.fd
README
XS11_0080_00B.fd
When I tried to open them to figure out which file I needed for the update. I received a message saying an application is needed to open the file(s). I do not know where to go from here. Do you have any idea how to proceed? I truly appreciate your support.

HT1222 how to update firmware

how to update firmware for iphone 4?

It says that your have the latest firmware (5.0.1) for your iPhone but to update your iPhone plug it into your iTunes and click on check for updates or since your have the lastest firmware just go to Settings -> General -> Software Update.

HT201364 how to install firmware 1.1 on Air?

how to install firmware 1.1 on air?

http://support.apple.com/kb/DL745?viewlocale=en_US&locale=en_US
That is a 5 year old update. What do you find when running software update?

How to update apps for my iPOD

How to update apps for my iPOD

On the iPod go to App store app and tap Updates in lower right. Then tap on Update all or update individual ones.
Note that if yo do not have iOS 6, you may not be able to update the the latest version of some apps since some require iOS 4.3 or higher. some iOS 5 or higher or some iOS 6.

How to reinstall firmware for nokia 3250 due to pr...

Hi Any one can help
how to reinstall firmware for nokia 3250 due to previous firmware was corrupted, and I can turn on the power totally.

are you sure the flashlight is on phone memory and not in memory card? Coz for memory card apps, resets dont do squat.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

HT4623 Hi, I need help on how to update software for my ipad1, can someone help me?

Hi, I need help on how to update software for my ipad1, can someone help me?

The iPad 1 can not be upgraded beyond 5.1.1. If you haven't upgraded to iOS 5.1.1, see the info below.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

When will new update (firmware) for E72 will come?

when will new update (firmware) for E72 will come?

Firmware update for E72 has already been released..
v22.007 has been around for many European models since around January
v23.002 has been around for Asian/Middle-East models since this February.
Some operator-branded phones may not have available updates yet though.
You can use the Device Software Update page (search for the links in Nokia website) and enter your product code to find out if your product code has been included in the firmware updates already.

Suggested inkjet printers for mac book air 2012

what is a good inkjet home printer for a macbook air 2012?

I've been strongly recommending Canon inkjet printers for a long time. They have separate cartridges for each color so there's minimal waste of ink. They don't get clogged if you don't use them for a while (I'm looking at you Epson). I've dealt with their customer support before via email and it has been very good and fast.

I forgot my admin password for my macbook air 2012?

I forgot my admin password for my macbook air 2012?

Reset Password using Recovery HD
OS X 10.7 Lion /10.8 Mountain Lion
Follow the instructions in the first and third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
I don't remember my original (former) account password
https://support.apple.com/kb/HT1631

Cannot find the latest firmware for the Toshiba 40TL838G

Hi,
I'm trying to download the last firmware for the model 40TL838G but I can't find it.
Where can I find it?
Thank you.

Are you sure that TV is connected to internet properly?
How did you connect it? LAN / WLan stick (TOSHIBA Dual Band WLAN-Adapter WLM-20U2)?
In some cases it could be possible that some routers dont pass the firmware update due to locked ports. In such case you should check your router configuration. As additional option you could try to test the TV in connection with another network

How to install firmware for the WRT54G

I have downloaded the newest firmware for this router, but the file is a .bin. There is no .cue, .iso or other file associated with it. How do I open this file, or burn it?
I tried creating a .cue file using a .txt text editor:
FILE "WRT54Gv5v6_v1.02.2_fw.bin" BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00,
and renamed it WRT54Gv5v6_v1.02.2_fw.cue
Roxio's Creator Classic will burn it to a CD, but when I try to load it by inserting the disk, the disk is blank - but shown as 100% used in raw format.
Any suggestions? Why would Linksys provide this firmware in this truly complicated format?

You point your browser at http://192.168.1.1/ This is the LAN IP address of the router inside your LAN. You can connect to this address when you are connected to the router. You don't need internet for that.
The router came with a firmware preinstalled. Without the firmware the router is just a piece of junk. The configuration program on the CD only sends settings to the working and operating router, i.e. a router which is running its firmware. You can update the firmware by uploading a new firmware file to the router. But there was no firmware on the CD nor was it installed anywhere during initial setup. The router came with a firmware otherwise you could not use it.
Just go to http://192.168.1.1/ and click on the Administration tab. The firmware upgrade function is somewhere on a subtab. You'll see a browse button with which you select the firmware file you downloaded before. Once you press the Upgrade button (please only do it if you really want to upgrade the firmware!) the browser sends the selected firmware file to the router where it will be installed after the router reboots itself.
There is no point installing it from a CD as you only have to transfer the file to the router. Burning it to a CD only to load it from the CD does not make a different. As you have mentioned it does not make a difference where the firmware file is. Only as you have to download it anyway and then just transfer it to the router there is no point in burning it on a CD. You upload it to the router and that's it. Afterwards you delete the file because you don't need it anymore and you can download the latest firmware from linksys.
When you write "DSL, cable and even VoIP modems" upgrading using any OS, did you ever do it? How exactly did you do it? Are you sure there is an updater for MacOS? Linux? Solaris? ... I think most modems will do it in a similar fashion using a browser upload.
I don't understand what the problem is with this kind of firmware upgrade for you. It works very well and is often used. Many devices have browser interfaces nowadays and thus it is only natural you do the firmware upgrades the same way. The router can be upgraded using tftp as well. However, there are a few pitfalls with this method and often you'll need a command line prompt to run it. But these are the only possibilities to send the firmware file to the router and somehow you have to get it there.
Message Edited by gv on 09-07-2007 03:01 PM

How to change firmware password on Macbook air

Hi again all,
Community here helped me to manage to change the firmware on my macbook pro.
I also have the same situation with my macbook air (please feel comfortable, i do not have other notebooks).
How can I change the password at least the firmware password (in order to deactivate it and then proceed to an applejack session) ?
I tried: cmd+R, C press.. Nothing
ps: i do not have any cds, dvd or key
Thx a lot for your help
Jerome

Hi,
Thx for the answer.
I did not receive/have any dvd/cd/key for the macbook air... and AS it is a macbook air so there is no drive anyway...
Is there any other solution to change the firmware password/deactivate it ?
Thx
jerome

Can't update firmware for Ipod Touch on my PC

I have a 1st gen Ipod touch & windows xp. I have the latest itunes.
It will not let me update the firmare, but I can sync fine.
To update the firmware, I give it to my husband and he can do it from his computer. Then I can sync with no problems. It's just the updating firmware that causes the ipod to crash (1602 error, but occassionally other numbers).
We thought it might have been that I didn't have USB 2 ports, so I bought a USB 2, 4 port card, and my husband helped me install it. Unfortunately this did not solve the problem and it still wont let me update. I thought perhaps because the usb 2 card came with driver disks, it might need a driver. But I checked the driver disk and it contained drivers for strange things I didn't have. Then I checked the internet and it said that with xp the drivers should be automatic with windows update, and mine is all updated, I checked.
I've checked my devices manager list, and the list only contains one "enhanced" usb port, even though the card I have has 4 ports, but maybe I am not understanding how the devices list works.
Just to clarify, have had the same problem with 2 ipod touches. My orignal one got a cracked screen (one crack so covered by warranty) and I received the replacement ipod touch yesterday, and I still could not update the firmware on my PC. My husband had to do it on his PC (vista).
Thanks in advance for any suggestions. I really would like to be able to update the firmware on my own PC, it's geting extremely annoying.

Because I cannot sync my music to my iPhone without updating on my PC which has all my iTunes. Where should I have posted my question to get the help I need?

How to update firmware for SSD Toshiba Air 2012

Similar Messages

Maybe you are looking for