How to update Firmware

Hi,
I have a E66, but when i run the Nokia Software Updater, it states that i have Firmware v. 200.21.118 and that there is no new Firmware!
How do i update the Firmware then?
I want to update because of some problems wiht the alarmclock and batteri life.
Solved!
Go to Solution.

If the updater says it isn't available then all you can do is wait, checking the updater often.
Firmware is not released at the same time all over the world and it can take a month or two to be widely available. Network branded/supplied phones take even longer to get updates and this is controlled by the networks, not nokia.
So really all you can do is wait and be patient as no one here can tell you when it will be released.
Any methods of forcing an update that you may read about elsewhere cannot be discussed here as warranty voiding topics are against the rules.

Similar Messages

  • How to update firmware for SSD Toshiba Air 2012

    How to update firmware for SSD  Toshiba THNSNS128GMFP ??
    My disk see on system as  SandForse 200026BB  33Kb

    https://discussions.apple.com/message/22108992#22108992
    https://discussions.apple.com/thread/5120950?start=0&tstart=0
    https://discussions.apple.com/message/22649139#22649139
    https://discussions.apple.com/thread/5300125?tstart=0
    Seems to be a real issue. Here's to hoping Apple will address this issue sooner rather than later.

  • HT1222 how to update firmware

    how to update firmware for iphone 4?

    It says that your have the latest firmware (5.0.1) for your iPhone but to update your iPhone plug it into your iTunes and click on check for updates or since your have the lastest firmware just go to Settings -> General -> Software Update.

  • How to update firmware for HP Compaq DC small form factor

    I have HP Compaq dc7700 small form factor, Windows xp pro. It was bought on ebay and works fine except for one thing. The Bios was upgraded  but the firmware is not upgrading. the Bios was upgraded to V3.05 but the firmware remains 2.04
    I downloaded al the updates and firmware and followed instructions but I seem to have problems updating the firmware. I would like to know how to do this step by step because the instructions I read seems to be missing some steps. my question is how to update the firmware. I did read the instructions but could not get it updated. either updating via windows or in dos, I can't seem to make it successful. There are two error messages,
    1. ME BIOS Extension module has halted. Update BIOS or Management Engine firmware if problem persists.
    2. Amt mamagement engine is disabled.

    HP normally uses the term BIOS to refer to motherboard/CPU "firmware" updates and Firmware to refer to other device "firmware" updates... Below is a list of the two classes of firmware;
    BIOS 
    Business Desktops BIOS Utilities 4.02 Rev. A
    Microcode Update for HP 786E BIOS Family Computers with Intel Processors 1.06 Rev. A
    HP Compaq Business Desktop ME Firmware Update and Utilities 2.2.30.1046 Rev. A
    HP Compaq dc7700p Business Desktop System BIOS for Intel vPro Technology (786E1 BIOS) 3.05 Rev. A
    HP Compaq Business Desktop System BIOS (786E1 BIOS) 1.15 Rev. A
    Firmware
    Western Digital 7200-rpm Hard Drive Firmware Update 3.03E03 Rev. A
    Intel PRO/1000 Firmware 1.10 Rev. A
    HP Optical Drive (TSST H353B DVD-ROM) Firmware Update BC08 Rev. A
    HP Optical Drive (TSST H653N DVD-RW) Firmware Update HB02 Rev. A
    Seagate Hard Drive Firmware Upgrade for 500-GB Barracuda 7200.11 HP13 Rev. A
    ATI X1600XT Graphics Card Video BIOS Update S3A67124.104 Rev. A
    Samsung Hard Drive Firmware Upgrade - SATA Drives 42_51 Rev. A
    Please identify the exact device you wish to upgrade/update the firmware to.
    Frank
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How to update Firmware on a Mac?

    How to Update the Firmware of my HP LaserJet P2055dn connected via ethernet to my Mac?
    The Download just leave me with a .rfu file. How can I use this?
    This question was solved.
    View Solution.

    Hi,
    Below you may download the latest Mac Firmware Update utility:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
    Simply launch the file and follow the on-screen steps.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT4623 how to update firmware

    i am tryin to update firmware on my ipod touch 1g and cant find results anywhere

    The 1G can only go to iOS 3.1.3 that you get here:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

  • How to update firmware for mac os x

    I downloaded firmware for my MacBook Pro 2007. Can someone assist me with the installation. The firmware is on my desktop but I do not know which application to open it with? I am confused by all of the files.

    Hello Kappy,
    Thank you for responding so quickly. I went online to Apple to update my MacBook Pro 2007 (Mac OS X 10.4.11) I have Firefox 3.6.28 as my internet connection. I downloaded the firmware to my MacBook Pro. I opened the Firmware restoration CD download and the following files were there:
    IM51_0090_08B.fd
    IM61_0093_05B.fd
    LICENSE
    MB21_00A5_06B.fd
    MBP21_00A5_02B.fd
    MBP22_00A5_02B.fd
    MP11_005C_04B.fd
    MP21_007F_02B.fd
    README
    XS11_0080_00B.fd
    When I tried to open them to figure out which file I needed for the update. I received a message saying an application is needed to open the file(s). I do not know where to go from here. Do you have any idea how to proceed? I truly appreciate your support.

  • How can update firmware on a GTX670 or HD5450 GPU?

    Hi
    How or where can I get the firmware of a EVGA GeForce GTX670 or a XFX Radeon HD5450 updated so I get to see the white EFI screen when booting my Mac Pro?
    I installed the GTX670 a few months ago and the Mac Pro boots and works fine with it.  What I would like to do is fit a SSD drive and install OS X.  Without the EFI screen I can't start to install OS X off the DVD.
    I look forward to some ones help
    Gary

    Never really wanted to crack open the Mac Pro, but the original Radeon wasn't upto the job of running X-Plane or Digital Combat Simulator (DCS) in Boot Camp.  The Pro is supposed to be my software development system.  If I could be rid of Windows, I would.  DCS is Windows only so I will have to knock together a PC.
    A bit off topic... I also 'fly' X-Plane.  A friend and I have built a flight simulator that works with X-Plane.  A couple of concept drawings attached.  Instead of hydralics we used pneumatic rams and quiet compressors.  The simulator works very well and is great fun to fly.  I am now writing the software to get the simulator to work with DCS.
    Back on topic... Hopefully Apple will release a Mac Pro with SATA3, Thunderbolt, USB3, the ability to have multiple GPUs and use tech like SLI and PCIe 3.  The Pro deserves a good overhaul.
    In the meantime the Sonnet kit looks cool.  I am liking the idea of a MacBook Air + Sonnet Echo + GTX670.  If that would work(?) 

  • How to update firmware with a boot camp'd macbook?

    this is pretty frustrating..... there seems to be no way to update the firmware on a macbook that has had xp/vista installed. the disk is no longer a GUID type, it's an MBR disk now, and the EFI partition is gone. i could recreate the EFI partition but that wouldn't help at all with the GUID problem.
    i installed mac os x onto a clean external usb drive, which is now a GUID disk with the right file system and so on... it doesn't have an EFI partition, which i would have thought the mac os x installer would have made. the firmware updater has the big ! on the disk and says it doesn't meet the requirements.
    any ideas here? will the firmware update simply not run from an external drive? if so, how on earth is someone supposed to ever update their firmware if they use boot camp?

    When you create GPT using Disk Utility on your USB/FW it will have EFI and GUID, but you won't see them until back in Windows.
    And yes, you should be able to run firmware updates off USB drive with OS X. Should. But that doesn't always mean will/can or that it was even tested in that configuration
    Boot Camp is for GPT with an MBR table to trick or allow Windows to install. If you formatted a drive internal as MBR you didn't use BC or at least not need to.

  • How To: Update Firmware on Blu-ray Players

    Here is my question: I have been burning DVD's of our annual talent show to give as a gift to the performers in appreciation of their work in the show. After burning 10, my DVD burner stopped working and the message requested that I update my "Firmware" - no other message and no clue as to how to go about doing this.
    I have a Toshiba Satellite A665 laptop that I purchased in 2010 and this was the first attempt at burning a DVD which as I said went well for the first 10 but now I cannot get the thing to burn anymore.
    How do I update my firmware? Any clues would be greatly appreciated as some of these performers are snowbirds and will be leaving for the north (Canada, Mishigan, New York, to name a few of the places) and I hate for them to leave without a DVD of their performance so that they can share the fun with their relatives back home.
    Help!!!!!!!!
    Irwin

    Peter:
    Had some medical emergencies and haven't really gotten back to my problem with the DVD's and Firmware - but I did attempt a different project recently (which also needed me to burn a DVD that was larger than the typical 4.7 GB) and was successful in doing so. I ended up pulling the still pictures out so that the size wasn't so big and put them in a separate folder and then attempted successfully, I might add, to burn the DVD using a 4.7 GB DVD instead of a Dual Level 8.5 GB DVD.
    Hopefully things will quiet down this weekend and I will do some research into using the Toshiba Service Station you made reference to. But for now, I am a happy camper. Oh, by the way, since I learned how to do it using the 4.7 GB DVD's, I merely broke the talent show into two parts and burned it on two smaller DVDs versus attempting to put it on the 8.5 GB DVD. What puzzled me was that I could burn the 4.7 GB DVD's but not the 8.5 GB DVD's. But hey - it worked.
    Thanks again for all your support.
    Irwin

  • How to update firmware on a Zen Mic

    Hello,
    i want to downgrad the firmware of my zen micro. i got a windows xp with sp2 and several updates. when i click on update i only see the time symbol and nothing happens neither on the desktop nor on my mp3 player.
    i got the newest firmware with plays for sure. i tried it on a windows 2000 pc but there it is not detected.
    i tried it with the recovery mode, and "erased" there the firmware, but actually it isnt erased.
    how can i erase the firmware? how can i upgrade it's?

    You can "downgrade", or at least go back to a v.xx PDE firmware version. The latest ..0 firmware is able to detect and downgrade from the v2.xx PFS/MTP firmware.

  • How to update firmware with a Mac?

    Hi there¡
    I want to update my N95 with the 20.0.015 firmware version.
    The point is that I am a Mac user, so I can't use the PC suite.
    Any advice?
    Thanks in advance!!!

    Hi koyote
    As a Mac user I use Windows under BootCamp, although NSU may also work under a Windows emulator I personally would not be happy doing this.
    I presume that there is no NCP within a reasonable distance to carry out software update for you?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How to update firmware on Samsung 840 pro SSD?

    I just bought a samsung 840 pro SSD and am trying to look for a way to upgrade the firmware to the latest version.  Apparantly it is only possible via windows, has anyone found a way to do it on a mac?  I received my SSD yesterday and there was a firmware update released by Samsung on the 13TH December but i am unable to update.
    Any help would be greatly appreciated.
    Thanks

    This is why I don't recommend Samsung SSDs to Mac owners. Crucial, OCZ, SanDisk, Intel, and Plextor (I think) have firmware updates that can be performed on a Mac. While I wouldn't get a SanDisk or Intel for other reasons, it wouldn't be because of inability to update the firmware.

  • How to update N73ME's firmware?

    hi,
    I'm getting N73 ME next week.it will be my first symbian phone.
    please tell me how to update firmware via pc?
    i never updated firmware of my 6131 so i don't know how to do it.
    after update will the phone be the same as before?
    i mean will all function and software run properly?
    if not tell me how to make every program & application run properly & what measures i will have to take?
    which apps & files i need to copy to my pc before update?
    what probable problem i might face after update?
    to make an absolute perfect(!) firmware update what should i do?
    i'm totally ignorant about firmware update,please be as elaborate as possible in your reply...
    please.........
    editlease be elaborate...

    No. Firmware updates have to done on the platform for which the iPod is formatted.
    Version 1.2.1 of the iPod software is contained in iTunes in any event.

  • Urgent !! Help me to update firmware Nokia E63 (my...

    My phone is Nokia E63. How to update firmware (offline) ? Coz my computer doesn't has internet connection !
    Or, how to update firmware from my phone instead ???
    Thank you.

    Extremely sorry about the earlier post.. For your device.. its only possible thru' PC..
    or you may get it done at Nokia Care I think...
    http://www.nokia.co.in/support/download-software/device-software-update#
    --------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

Maybe you are looking for