How to update license for SUP 2.0?

Hi,
We had previously installed a trial version of SUP 2.0 on a windows server 2003 version 64 bit system. Since it was only a trial version, it expired and now we have obtained a license for the same.
How do I use the same installation by updating the license? Is it possible or I have to uninstall the whole thing and install from scratch?
Thanks & Regards,
Vaishnavi

HI
To apply license to any version follow these steps
1. Down load the license from Sybase control centre, and download the Licence file, copy and paste
\\sybase\unwiredplatform\servers\unwired servers\ (paste the file) (licence)
Run cmd promt >sybase\unwired platform\server\inwired servers\bin licence.bat ED DT 20
( as per the licence agreement)
regards
Aps

Similar Messages

How to apply license for SSM 7.5 & Netweaver CE 7.1?

How to apply license for SSM 7.5 & Netweaver CE 7.1?
My application server java in SAPMMC: appear message: no valid license found.
Acually we already bought license and download,
So, how to solve this license problem?

Chamnap,
When your NetWeaver license expires, it can be restarted, but will only run for 1/2 hour, to allow installing a new license.
Step 1- Start NetWeaver CE from the control console
Step 2 - Log on to NetWeaver Administrator http:///[server]:50000/nwa and go to Configuration tab then Infrastructure sub-tab, then Licenses
Step 3 - Make note of your System Number and Active Hardware Key in the System Parameters section
Step 4 - Navigate to the Service Marketplace http://service.sap.com/licensekey
Step 5 - You are looking for SAP Business Suite - SAP Products with ABAP Stack, Without ABAP stack (WEB AS Java-J2EE Engine) SAP Enterprise Portal link
Step 6 - Fill in your Hardware Key and System # - Make sure you choose this License Type: J2EE Engine - Web Application Server Java (it is not the default selection)
Step 7 - A message at the bottom of the page will note a new key has been generated and you can Download the txt file needed (you also receive an email with the info as well)
Step 8 - (Restart NetWeaver CE - if its timed-out) On the Licenses page of nwa click Install from File > Browse to the txt doc you downloaded and ADD
You now have the new license install. Make note of the date to schedule the time for any future updates, so that service is not interrupted.
If you cannot access the license key on the Service Marketplace you will need to contact your SAP account representative.
Regards,
Bob

How to obtain license for 10 users of siebel software?

Hi All,
Can anybody please tell me:
How to obtain license for 10 users of siebel software?
how much does that cost (in US $)?
and how to become partner with siebel for implemeting siebel applications
Thanks,
viswambhar sarma.

Updated: March 2015
National Instruments provides this forum as a courtesy to its customers. However, this is not the primary method for requesting support and assistance with the DASYLab product. NI does not actively sell the DASYLab software, nor does it actively support it.
Where else can you obtain assitance?
Your reseller - it's likely that they are familiar with your hardware and can provide help.
The www.dasylab.com web page has updates, drivers, product information, an extensive list of technical notes.
Measurement Computing Corporation has product information, product updates, and support information.
In Europe, MeasX GmbH & Co Kg sells, supports and enhances the DASYLab software
We recommend that you contact your reseller first. They know your hardware and software environment, and are most likely to be able to assist you quickly.
You can request help directly from a support engineer by going to the Support section of the www.dasylab.com web page. This is automatically routed based on geography, to the person best suited to assist you.
If you post a question in this forum, we cannot guarantee a response time.
When requesting support for DASYLab
DO NOT post your full DASYLab serial number
Please tell us
the version of your DASYLab software,
the level of your software (Lite, Basic, Full, Pro)
the exact DAQ device by manufacturer and model,
your operating system and computer,
and, if appropriate, a copy of your worksheet.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

How to update apps for my iPOD

How to update apps for my iPOD

On the iPod go to App store app and tap Updates in lower right. Then tap on Update all or update individual ones.
Note that if yo do not have iOS 6, you may not be able to update the the latest version of some apps since some require iOS 4.3 or higher. some iOS 5 or higher or some iOS 6.

How to update firmware for SSD Toshiba Air 2012

How to update firmware for SSD Toshiba THNSNS128GMFP ??
My disk see on system as SandForse 200026BB 33Kb

https://discussions.apple.com/message/22108992#22108992
https://discussions.apple.com/thread/5120950?start=0&tstart=0
https://discussions.apple.com/message/22649139#22649139
https://discussions.apple.com/thread/5300125?tstart=0
Seems to be a real issue. Here's to hoping Apple will address this issue sooner rather than later.

How to install license for expired SAP J2EE engine?

Hi,
I had used evaluation copy of the SAP J2EE engine. This copy works for few days and now the SAP J2EE engine is stopped. After its expiration, we purchased the permanent license.
My question is: <b>how to install license for the expired SAP J2EE engine so that the engine can be started without re-installation?</b>
Waiting for the reply.
regards,
Anand

Dear Anand ,
To install license of the J2EE Engine :
In the Visual Administrator -> Server 0 -> Services -> Licensing Adapter. Then choose tab page Runtime -> Installed Licenses and Install subsequent temporary license.
check the URL for further details :
http://help.sap.com/saphelp_nw70/helpdata/en/14/5e533e5ff4d064e10000000a114084/frameset.htm
Hope this will help you resolve issue .
Regards ,
Santosh

HT4623 Hi, I need help on how to update software for my ipad1, can someone help me?

Hi, I need help on how to update software for my ipad1, can someone help me?

The iPad 1 can not be upgraded beyond 5.1.1. If you haven't upgraded to iOS 5.1.1, see the info below.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

How to generate license for AIP-SSM without PAK-number?

Hello! I’m sorry for my English. I have a problem with generating license for AIP-SSM. My contract with SMARTnet service is activated, but I don’t have a PAK-number. How I can generate a license for updating my module?

Alternatively you can always write an email to [email protected] with your serial number and they should be able to provide you the license for any cisco device.
Sachin

How to switch licensed for "ADOBE DESIGN STANDARD" from iMac to Macbook Pro?

I am currently licensed for "ADOBE DESIGN STANDARD" on an iMac. I have a new MacBook Pro and want to use that instead of the iMac. Do i need to get a new license key? or ??
I know i can download an "eval" copy on the laptop, but how do i switch license keys? i'm not even sure i still have the (valid) license key for the iMac...can i request another??

As long as you are staying within the same general platform (PC vs Mac) you do not need to change licensing. You are allowed to have two activated installations with your license, so you should be able to install on the new machine without having to worry about the older one at all (unless you ever want to free up the second activation for yet another machine). As you mentioned, you can download the trial version and use the serial number from your purchase to activate it to full use.
If you registered your software with Adobe, the serial number should be available via your Adobe account online. If you didn't register it then you will at least understand why it pays to do so.
IF you end up needing to resolve any issues with activating the product on the new machine you will need to contact Adobe Support directly. Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

How to update firmware for HP Compaq DC small form factor

I have HP Compaq dc7700 small form factor, Windows xp pro. It was bought on ebay and works fine except for one thing. The Bios was upgraded but the firmware is not upgrading. the Bios was upgraded to V3.05 but the firmware remains 2.04
I downloaded al the updates and firmware and followed instructions but I seem to have problems updating the firmware. I would like to know how to do this step by step because the instructions I read seems to be missing some steps. my question is how to update the firmware. I did read the instructions but could not get it updated. either updating via windows or in dos, I can't seem to make it successful. There are two error messages,
1. ME BIOS Extension module has halted. Update BIOS or Management Engine firmware if problem persists.
2. Amt mamagement engine is disabled.

HP normally uses the term BIOS to refer to motherboard/CPU "firmware" updates and Firmware to refer to other device "firmware" updates... Below is a list of the two classes of firmware;
BIOS
Business Desktops BIOS Utilities 4.02 Rev. A
Microcode Update for HP 786E BIOS Family Computers with Intel Processors 1.06 Rev. A
HP Compaq Business Desktop ME Firmware Update and Utilities 2.2.30.1046 Rev. A
HP Compaq dc7700p Business Desktop System BIOS for Intel vPro Technology (786E1 BIOS) 3.05 Rev. A
HP Compaq Business Desktop System BIOS (786E1 BIOS) 1.15 Rev. A
Firmware
Western Digital 7200-rpm Hard Drive Firmware Update 3.03E03 Rev. A
Intel PRO/1000 Firmware 1.10 Rev. A
HP Optical Drive (TSST H353B DVD-ROM) Firmware Update BC08 Rev. A
HP Optical Drive (TSST H653N DVD-RW) Firmware Update HB02 Rev. A
Seagate Hard Drive Firmware Upgrade for 500-GB Barracuda 7200.11 HP13 Rev. A
ATI X1600XT Graphics Card Video BIOS Update S3A67124.104 Rev. A
Samsung Hard Drive Firmware Upgrade - SATA Drives 42_51 Rev. A
Please identify the exact device you wish to upgrade/update the firmware to.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HT1766 how to update software for 4.2ios

how to update iPhone of lower versions as 4.2.1 (8c148)

Hi Irene,
You have to hook your phone up to the computer you normally sync with in order to upgrade any IOS below 5.0....Once you have hooked it up, and selected the device, you can then check for updates. If your phone can be updated to a higher level than 4.2.1, then iTunes will let you know, and you can then initiate the update process.
Cheers,
GB

How to update drivers for Lenovo IdeaCentre C560?

Hi all,
I have PC Lenovo IdeaCentre C560 with Windows 8.1.
There is installed LSC (Lenovo Solution Centre), which has "System" section and inside it is "Lenovo software update" block, where LSC advices me "Go to Lenovo's website to update the Lenovo software on your PC".
But there are thess problems:
There are 20 drivers for C560 for Windows 8.1 on Lenovo website.
Which of them I have to download and install?
I have tried at my Device Manager to verify for all of my devices to be last update (it was terrible work) and I always got information that my driver is up-to-date.
Somebody have told me that LSC is not SUITABLE for C560 machine.
So I have these questions:
Does anybody have installed LSC on his C560? A does it work fine (so it find and install always new driver) or he only get abstract ionformation Go to Lenovo's website to update the Lenovo software on your PC?
Are there other possibilities to regularly update drivers then LSC?
Thanks.
Solved!
Go to Solution.

Dragnote,
maybe it was caused my terrible English, so I will try to explain relevant aspects once again:
1) I bought my Lenovo IdeaCentre C560 (part number: 57322363) on 22th of May this year from "stone" shop, not through internet. The Web site of this shop is www.mironet.cz, but there is not my PC there in actual supply, because the shop stopped to sell this model. But the parameters etc of this model is on Mironet's Web site here:
http://www.mironet.cz/lenovo-ideacentre-c560-23quot-fhd-intel-core-i54570t-36ghz-8gb-1tb-dvdrw-nvidi...
but is is in Czech language.
2) My Windows are in Czech language, so I will translate it for you into English and therefore some informations/messages can be not fully exact. OK?
2) The LSC program was installed on my new PC with MS Windows 8.1 64-bit. I was only wanted to USE it! And why not. I got with PC only very slim User's Book, where was nothing much usable. And nothing about updating system and drivers, nothing about backuping etc. So I started to use SLC, because it was preinstalled there.
3) Problems of detect WHICH driver I have to update and HOW to do it:
3a) I tried three programs for detecting of my not-to-updated drivers: SLC, Detective and Smart Driver Update with these results: SLC only advice me to go to Lenovo website, Detective and Smart Driver Update gave me list of my not-to-update drivers, but the lists were rather different.
3a) The link I provided, http://forums.lenovo.com/t5/forums/replypage/board-id/ideaCentre/message-id/9220, lists 20 drivers and all of them were released in period between 16 Oct 2013 and 01 Dec 2013, so I have used abbreviation "end of last year", but you are right - mostly of them are from 16 Oct 2013.
3b) I TRIED to compare their date of released with drivers installed on my PC, but I have two basic problems:
3b.1) How to identify WHICH driver on my PC corresponds to drivers on Lenovo web site?
The names are NOT the same. For example: on Lenovo Web site is "Realtek Audio Driver V6695 for Microsoft Windows 8.1 (64-bit) - Desktop", released 17 Nov 2013, version: 6.0.1.6695. Then I found on my Device manager "Realtek High Definition Audio". So my question already is: "Is it the corresponding driver or not?". But let us say: it is.
So, now we can continue with next information on my driver : date of release is 15 Nov 2013, version: 6.0.1.7093. So I am not sure if these two drivers (one on Lenovo Web site, second on my PC) are the correct PAIR. There is antagonism between date of release and the version number.
3b.2) How to update, when I already "decided", that my driver is not-to-updated and therefore I need it to update?
I launch my Device manager, then I choice some driver, then I click on "to update driver software" and there display two possibilities: find driver on computer, or find driver on Internet. So I click on "Find driver on Internet". Then I wait about 10 seconds and then I ALWAYS get the SAME information: "The driver of this device is up-to-date"
This "optimistic" message I received for about 30 of my drivers. So there are three possible explanations how to explain it:
1) LSC, Detective and Smart Driver Update lie to me, when they tell me "You have some not-to-update drivers", because in reality all of my drivers ARE up-to-date.
2) I really have some not-to-update driver but because I cannot address correct WHICH driver is not to-up-date, I try wrong driver to update. Wrong, because it IS up-to-date.
3) I identify the correct not up-to-date driver but the choise "find driver on Internet" open finding of this procedure in non-Lenovo Web sites.
And maybe you are right when you write: "Sometimes, on a new system, Lenovo installs drivers that are "newer" than the drivers listed on their site. Don't worry, keep the newer drivers."
I apologize very much,but I am not able directly to use the information from you.
I never updated drivers on my old PC (I had it 12 years!), so I have no experiences what happens when I replace my NEW (up-to-date) driver with some OLD driver installed from Lenovo Web site. I am affraid that my keyboard, mouse, screen etc will stop its function.
When I bought this Lenovo machine, I to myself have told that I will keep my drivers up-to-date, but I do not how.
Mirek

How to fix "Licensing for this product has stopped working - Error 150:30"?

I cannot pen PSE or Bridge. It get the message "Licensing for this product has stopped working - Error 150:30".
I assume it is because I recently upgraded my Mac to Yosemite.
What do I need to do to be able to open PSE again?
Thank you.

Thank you. I appreciate your tips. I tried solution 5 and it doesn't work.
The rest is essentially gibberish to a basic user like myself. I have
neither the expertise nor the confidence to go into these folders and start
mucking around in there. Can I please have someone call me and guide
through the necessary steps. My number is 06 46 40 94 39 (Location: France).
Cheers.
Michel Payen-Dumont & Nancy Feyerer
www.gaulejac.blogspot.com
Tél.: 05 53 50 72 80
M: 06 46 40 94 39
N: 06 45 29 59 40

How to update firmware for mac os x

I downloaded firmware for my MacBook Pro 2007. Can someone assist me with the installation. The firmware is on my desktop but I do not know which application to open it with? I am confused by all of the files.

Hello Kappy,
Thank you for responding so quickly. I went online to Apple to update my MacBook Pro 2007 (Mac OS X 10.4.11) I have Firefox 3.6.28 as my internet connection. I downloaded the firmware to my MacBook Pro. I opened the Firmware restoration CD download and the following files were there:
IM51_0090_08B.fd
IM61_0093_05B.fd
LICENSE
MB21_00A5_06B.fd
MBP21_00A5_02B.fd
MBP22_00A5_02B.fd
MP11_005C_04B.fd
MP21_007F_02B.fd
README
XS11_0080_00B.fd
When I tried to open them to figure out which file I needed for the update. I received a message saying an application is needed to open the file(s). I do not know where to go from here. Do you have any idea how to proceed? I truly appreciate your support.

How to install license for Weblogic Server 6.1

Hi,
I downloaded WebLogic Server 6.1, it works fine.
but I want to change the JDBC to Oracle (the default is Cloudscape). I follow the
instructions in page "Installing WebLogic jDriver for Oracle". it looks fine until
"java utils.dbping ORACLE james 1234 DBServer"
it says: Missing license file for: Weblogic Server 6.1.
I found the licese.bea is in c:\bea, I use "updatelicense.cmd" to do it several times,
it still doesn't work.
I am using Win2k and Oracle 8.1.7
Thanks.
James

Hi.
http://edocs.bea.com/wls/docs61/jcom.html
or do you have a more specific issue?
Regards,
Michael
Raymond Cheng wrote:
Anybody know how to prepare JCOM environment for developer to intetrate their windows client.
Thanks a lot.
Raymond Cheng.--
Michael Young
Developer Relations Engineer
BEA Support

How to update license for SUP 2.0?

Similar Messages

Maybe you are looking for