How to update metadata (e.g. keywords, author) for pdf created from spool

Hi Experts,
My requirement is that smart-form spool will be converted into PDF and will be saved on to application server. Now, a third party tool will read the data and print it. I want to update properties of this PDF like author, keywords. These properties can be seen when we save PDF on desktop and right-click on it.
Please provide pointers to address this issue. Any input will be highly appriciated.
Regards,
Gouri.

Hi,
Its good that u pasted the complete log file. In your environment you have to run this upgrade tool only once from any of the middle tier.
And with respect to your error that u got in precheck is quite simple. All u have to do is just run this script from by connecting to portal schema using sqlplus.
Run dropupg.sql
Location-------- /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/dropupg.sql
Later you re-run the upgrade tool and let me know the status.
Good luck
Tanmai

Similar Messages

  • HT1420 How do you see what computers are authorized for your account?

    How do you see what computers are authorized for your itunes account?

    There's no list available from your end; you need to go to each you think might be and check.
    (74236)

  • TS2972 how can i identify which computers are authorized for i tunes

    How can I identify which computers are authorized for use with I tunes?

    Hi there,
    You can't see a list of your authorised computers, but you can see how many are authorised and deauthorise them individually or together.
    I've found you a relevent support article which explains all of this:
    iTunes Store: About authorization and deauthorization
    Hope this helps,
    Nathan

  • How can I maintain multiple white spaces in a PDF written from InDesign?

    I need to have 2 white spaces maintained (within a part #) in the PDF I write, but when I open in Acrobat it converts it to one space.
    I've tried word spaces, set spaces and applying "no color" to a placeholder character and nothing is working!
    Any ideas or suggestions?

    I am talking about normal white space. Multiple fixed widt spaces are not a problem. How the space is handled in a PDF depends on how it is created.
    Viele Grüße
    Wilhelm Georg Adelberger
    Von meinem iPhone gesendet
    Am 21.08.2014 um 12:01 schrieb Peter Spier <[email protected]>:
    How can I maintain multiple white spaces in a PDF written from InDesign?
    created by Peter Spier in InDesign - View the full discussion
    It may not be a great idea to use multiple spaces, but it certainly is not prohibited and sometimes is necessary -- you might want a 2em space, or a thin space before and after a tab you underline in a form.
    I'm able to select the multiple spaces just fine in Acrobat 9 using the text touch-up tool.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6661037#6661037
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in InDesign by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How to move PDF file from Spool to Application Server?

    How to move PDF file from Spool to Application Server?
    Cannot use RSTXPDFT4 because that converts OTF to PDF and the file is already PDF.
    RSTXPDFT5 doesn't work. It picks the file up and assigns it a 'text' type and outputs a 1 line txt (1kb in size) on the server with the spool number in it!
    The program which outputs the file to the spool, in the first place, uses adobe forms and outputs to a printer of type PDF.

    Hi Gemini ,
    Please refer the below links.
    [http://sap.ittoolbox.com/groups/technical-functional/sap-hr/convert-a-spool-to-pdf-and-save-on-application-server-in-background-720959]
    [http://www.sapfans.com/forums/viewtopic.php?f=13&t=325628&start=15]
    Edited by: Prasath Arivazhagan on Apr 13, 2010 4:48 PM

  • Help me in resolving "No authority for the node from characteristic"

    Hello Friends
    I am trying to implement hierarchy on ocostcenter.
    i am able to create analsys authorization .but when i am trying to create hierarchy ,i am able to select the hierarchy name,
    when selecting the node from the push button i get the error message
    "<b>No authority for the node from characteristic
    0PROFIT_CTR, hierarchy 1000hirarchy (00000000,)"</b>
    Please help me in resolving this proble.
    Thanks
    Ram

    Ram,
    Try running ST01, set an authorization trace and then run your specified transaction code.
    After the failure return to ST01, turn off the trace and hit Analyze. Then check analyze authorization trace and give your User ID and any other relevant criteria.
    Look for return codes on the left which are not 0, these should indicate possible issues with authorizations.
    Regards
    Ashley

  • How to update the condition price in sales order while creating the invoice

    Hi,
    How to update the condition price in the sales order to carry out the new price while creating the invoice?
    While creating the invoice it should update the condition price in sales order.
    Thanks,
    Balaram

    No, pricing is not there in delivery.
    I found an exit for VF01transaction where we can update the price in order.
    Can you please tell me how to update the price if I have the order, material numbers and conditions number?
    Thanks,
    Balaram

  • How can I retrieve purchased tunes not authorized for my computer?

    I am told I have 79 purchased tunes from I Tunes Store that were not copied on to my computer because my computer was not authorized for those tunes. How did this happen & how can I correct the problem?

    Sorry, but I'm not sure what you mean. Did you copy tracks from one computer to another, and if so by what means?

  • How can I see what computers are authorized for my phone?

    I'm using an iPhone 4 on iOS 7.1.  I have a new computer and need to de-authorize one of my old ones to add the new one.  I can't see a list of all the authrozied computers.  My only choice seems to be 'de-authorize all', which I really don't want to have to do.
    Does anyone know how to diplay the coputers that are authorized?

    See:  "How do I know how many computers are authorized?"  >  Authorize your Mac or PC using iTunes

  • How to update EKPO-MAHNZ ( reminder counter) in purchase order created?

    There is the requiremtn to update the field EKPO-MAHNZ in a just created purchase order (PO).
    It is for the purpose of data migration. So a PO is created from file data using BAPI_PO_CREATE1 but this BAPI seem not to provide a way to update the mentioned field in the EKPO table (position data of PO).
    Is there any other way?! BAPI!? to achive this!?
    Any help or suggestion is welcomed!
    CN

    >
    Vamshi_1468 wrote:
    > Hi dude,
    >
    > If the field is not available in BAPI_PO_CHANGE...then go for BDC...run a recording and update the field...only way out...
    >
    > Regards,
    >
    > Vamshi
    Thanks for your reply!
    Batch input would be an option but the field is not ready for input in ME22n.
    Any way around it?

  • How can I fix my Firefox browser so that PDF files from the Internet do not blur and go out of focus?

    When I try to open a PDF document from the Internet, it opens, with sharp resolution; however, within a few seconds, it blurs and seems to have multiple copies being shown on top of each other (ever so slightly mis-aligned). Yet, when I use any other browser, the document opens without losing sharpness.
    Also, opening a saved PDF document in Adobe Reader does not cause any loss of sharpness.
    Running updated Windows XP; Adobe Reader updated; and Firefox updated.

    Firefox's built-in PDF viewer overlays a transparent layer of text over a graphical image so you can copy/paste. It doesn't always line up pixel-perfectly, so if the text is not transparent for some reason, you will see double text.
    Could you try switching to the Adobe Acrobat plugin? This article has the steps: [[How to disable the built-in PDF viewer and use another viewer]]. Does that one work correctly?

  • How to Enable Plugin before File Opened And Load PDF File From memory?

    hello everyone,
    there have two problems,all i want to do is to show a pdf file encrypted by AES algorithm.
    1.one is how to enable plugin before file opened?
    i developed another two plugin,and each enabled after one pdf file was opened,and now i want to replace the file open command and can do some word by meself,such as decrypt the pdf ?
    2.another is how to load pdf file from memory?
    if i can enable plugin before file opened,and than i can read the file and decrypt it,and now i want to do is do load the decrypt file (in memory) into the adobe?
    i tried many method,but all in vain.who can help me or give me some advice?
    thanks.
    merry chrismas to everyone.

    The proper way to handle other file formats (even where it is really a PDF that has been "wrapped") is to create an AVConversionHandler.
    To load a PDF from a source other than the file system, you need to create a custom AVFileSys.

  • How to update XML Facts in rule author

    Hi,
    since there is not a separate forum for the rules engine and this is tightly related to BPEL, so I thought I'd post the question here.
    what's the process to update XML Facts in the rule author and the BPEL process that is already using the rule repository for decisions?
    for example, if I change the data type on one of the elements in the XML Facts schema from string to int, what do I do next to put such change into the existing rule repository and update the BPEL side of things?
    I have tried re-importing the updated XSD into the rule repository (it's a WebDAV repository), I can see the change in the new definitions for the xsd, and I can also make use of the change to define new rules, in the words, the rule author side seems fine;
    then I copied the updated xsd into my BPEL project that calls the rules engine, and then what should I do next? I can't see any where in jDeveloper I can "update" the decision service partner link, so I just re-deployed the BPEL process with the updated xsd under the rule/xsd folder, but then the same call to the decision service starts failing with a "business exception, cx-fault-actor" but without any more details.
    I haven't added any new rules, only change of data type on one element.
    what am I missing?
    thanks.

    In ALDSP 2.5 (and ALDSP 3.0), non-XA data sources can be updated without writing an update-override. But if you want to do any special processing that is not handled by the default behaviour, or for data services not based on relational databases, in ALDSP 2.5, you can write an update-override.
    In ALDSP 3.0, the update model is somewhat different, I suggest that you peruse the ALDSP 3.0 documentation for a thorough discussion. The documentation is here http://edocs.bea.com/aldsp/docs30/index.html I suggest start with a search on 'update'.
    In ALDSP 3.0, I believe updateoverride feature still exists for the purpose of backwards compatibility (at least it turned up in a search of updateoverride in the 3.0 docs)

  • How to update the Sent Idoc Status based on the Response From Webservice

    Hi All,
    I have to develop Idoc--SOAP Sync Process Scenario Using BPM .
    I have configured every thing using BPM and mapped
    MATMAS----SOAP Request
    SOAP Resp----STATUS.SYSTAT01
    In R/3  the Main Idoc Number(MATMAS) Status needs to be update , but it is creating the new Idoc with STATUS.SYSTAT01.
    I have used STATUS.SYSTAT01 Idoc to Update the status of the Original idoc based on the Response that is coming from webservice .
    I was posted the same thread a days ago and there Bhavesh suggested me some sugessions.
    How can we make the status of the Idoc based on some response Text
    iam unable to follow OR not able to clear my self on this.
    Please suggest me or give some over view kind of thing on this
    Regards

    Hi Suman,
    It is clearly mentioned in SAP help that "SAP Intermediate Documents (IDOCS) are EDI like documents that are asynchronous in nature."
    So Your Scenario is Asynch(receive) - Synch(WS call) -Transformation (Multimapping)- Asynch(Send to R/3).
    now go in this way:
    you can develop all the message Interfaces  of  Abstract catagory (not manditory )
    MI_AA_MATMAS   -> Abstract Asynchronous message    interface for your Matmas IDOC
    MI_AS_SOAP_ReqandResp  -> Abstarct Syncronous MI for SOAP request and response.
    MI_AA_STATUS ->Abstract Asyncronous MI for Status Idoc
    MI_AA_SOAP_Req ->  Abstarct Asyncronous MI for SOAP request .
    MI_AA_SOAP_Res ->  Abstarct Asyncronous MI for SOAP response .
    Thats all in Message interface.
    your first reciever :
    (This will receive the message asynchronously from R/3)
    create a conatainer varaiable (say preceive) and assign it message interface MI_AA_MATMAS
    Now in thw Propert TAB of this step: give this message name.
    Step2: Synchronous call :
    create container Variable psoaprequest and psoapresponse  give abstract message interface MI_AA_SOAP_Req and MI_AA_SOAP_Req  resp.
    Now in thw Propert TAB of this step:
    Synchronous Interface : MI_AS_SOAP_ReqandResp
    Request Message : psoaprequest
    Response Message: psoapresponse
    Transformation Step :
    Here you will specify Interface Mapping that will conatain Multimapping between Synch Response - MATMAs and STATUS
    Let's name it as IM_ResandMatmasToStatus
    create a container variable as pstatus and assign it abstract interface MI_AA_STATUS.
    In Property pan of this step :
    Interface mapping :IM_ResandMatmasToStatus
    Source Message :psoapresponse
                                preceive
    (IT will ask you for two source messages as IM selected in this transformation has 2 source messages)
    Target Message :pstatus
    Send step:
    Select a message as pstatus.
    thats all in IR.
    If have doubt in ID just let me know.
    Thanks
    Sunil Singh

  • How to update commitment in R/3 after SC being created

    Dear gurus,
    In my project, there is a requirement that whenever SC is created, a commitment should be updated into Fund Management in R/3. This is to make sure that the Fund Management should get the up-to-date information of all objects that are planned to consume the budget (also to make sure that the behaviour will mimic PR creation in R/3).
    However as we're using extended classic, we will not create PR in R/3, thus only PO will be replicated to R/3. Though this will update the commitment for sure, this is considered by the client to be very late already.
    So we need to find a way, where once the SC is created, SRM should be able to update the commitment into FM in R/3. Thus when SC is approved and converted into PO, then the commitment will be updated (deleted) and the real commitment from PO should be created in normal way.
    I know there is a badi that can be triggered during SC creation, and also during PO creation. But we still stuck on the question of what Function Module that we can use in R/3 to:
    a. Create commitment during SC creation,
    b. Delete commitment when PO is created.
    Can anyone help me on this? Or if someone have other and better way to make this happen, I'm really grateful if you want to share with me.
    Best regards,
    Yosea

    Hi Yosea,
    I had to do something similar in a previous project.
    I think, first you should try to avoid but if it is a requirement.
    I don't know if with a different (customer) account assignment category would be possible. How the problem is the moment of the commitment, we used tha DOC_SAVE BADI. Take into account, that you should delete the commitment after approval, reject, update during the approval process,....
    In my case the commitment was done via a manual CO document (exactly batch-input FMZ1). I remember that exist a FM that did something similar but finally we didn't use and I don't remember know.
    If finally you decided to do it in other way, please let me know.
    I hope this help you.
    Regards

Maybe you are looking for