How to update model only if value has changed?
I would have expected that a model property is only updated if the value of the UIComponent has changed, but I am apparently wrong.
Why is the setter-Method of a model always called, even if the old and new value are the same (or better: equal)?
I have not found anything in the spec that defines the behaviour of an implementation in this regard.
thanks in advance for any comments
Daniel
I think the value always gets set, why? Does it cause problems on your end?
Though, it will be better if they don't update it when they are the same values.
Similar Messages
-
How to find if item's value has changed without leaving the field
i am using timer in this one appilcation , where i am letting the user define the time in minutes like (30) ..Is there any way to know after they change the value of that item lets say to 40 so that i can execute some other statements.
i have tried post-change and post text item ...
thanks.You could use a timer, and then in the When-timer-expires (WTE) trigger, try Validate(Item_Scope). Try that, and see if it will cause the when-validate-item trigger to run.
If that does not work, then in the WTE trigger, move the cursor out of the item. THAT will definitely cause the WVI to run if they have made a change. However, moving the cursor back into the field may cause problems with cursor position and also with the contents of the item selected (highlighted). -
IB:How to update a serial Number which has Inventory Material Transactions?
Dear friends
first of all thanks for your time and valuable solutions
Install base: How to update a serial Number which has Inventory Material Transactions
problem description:
Install base > quick search
Here is Installbase record, when I query from quick search
Rec# Item Item Instance Serial Number Status
1 300-7000-01 3000000 1000XXX-0538JQ0003 Return for Adv Exchange
2 300-7000-01 8000000 1000XXX-0538JQ0003- Return for Adv Exchange
3 300-7000-01 5000000 1000XXX-0538JQ0003-A Return for Adv Exchange
looking above data, first and third records are the legitimate serial numbers(correct according to the client specs), second record is not legitimate since it has a dash as suffix, we found there are many illegitimate serial Numbers exists, needs to be updated with the right serial Numbers which I analyzed in excel after pulling data from mtl_material_transactions , oe_order_lines_all , mtl_serial_numbers , mtl_system_items_b
basically these are all RMAs
I need to update the second record as 1094SUZ-0538JQ0003-B as per the guidelines, while updating I need to keep all the existing contracts, Warranty, what ever material transations it has, need to be same.
we have a package updating the serial numbers using IB API (csi_Item_Instance_Pub.update_item_instance) but it is updating only the records which has no serial numbers present for that instance, if there is a serial number already exists it is not working.
user define error msg "Serial Number 1094SUZ-0538JQ0003- has Inventory Material Transactions. This serial number cannot be used to update an existing Item Instance", but I need to update this anyway!! or am I missing something here, please advice me
below post looks like similar issue, talks about hard update, I have no clue, by doing that the updated serial number will have same transations, contracts, dates....attached to it like the previous serial number
IB UPDATE_ITEM_INSTANCE ERROR - doesn't allow ACTIVE_START_DATE to change
would be great If you guys help me out, really appreciated!!
unfortunately I couldn't find any solutoin in metalink for the existing serial number update
code for updating the serial number using IB API
x_msg_count := 0;
x_msg_data := '';
p_instance_rec.instance_id := rec.child_instance_id;
p_instance_rec.serial_number := rec.child_serial_number;
p_instance_rec.object_version_number := rec.child_object_number;
p_txn_rec.transaction_id := Fnd_Api.g_miss_num;
p_txn_rec.transaction_date := SYSDATE;
p_txn_rec.source_transaction_date := SYSDATE;
p_txn_rec.transaction_type_id := 1;
csi_Item_Instance_Pub.update_item_instance
p_api_version => 1.0,
p_commit => Fnd_Api.g_false,
p_init_msg_list => Fnd_Api.g_false,
p_validation_level => 1,
p_instance_rec => p_instance_rec,
p_ext_attrib_values_tbl => p_ext_attrib_values_tbl,
p_party_tbl => p_party_tbl,
p_account_tbl => p_account_tbl,
p_pricing_attrib_tbl => p_pricing_attrib_tbl,
p_org_assignments_tbl => p_org_assignments_tbl,
p_asset_assignment_tbl => p_asset_assignment_tbl,
p_txn_rec => p_txn_rec,
x_instance_id_lst => x_instance_id_lst,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data
Thanks
SuriSuri
Used this. May not be perfect but should get you there. Only if the table is registered (all the seeded tables should be registered) this will work.
select distinct a.table_name,b.column_name from fnd_tables a, fnd_columns b
where a.table_id=b.table_id
and upper(b.column_name) like '%SERIAL%'
Also this is very old one but if you need history for this change add the history insert logic as well..
DECLARE
l_return_err VARCHAR2 (80);
PROCEDURE debug (p_message IN VARCHAR2)
IS
BEGIN
dbms_output.put_line (SUBSTR (p_message, 1, 255));
END debug;
BEGIN
debug('======================================================================');
debug('Switching from serial number XDT07406. to XDT07406 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'XDT07406'
WHERE serial_num = 'XDT07406.';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'XDT07406'
WHERE new_serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
UPDATE wsh_delivery_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in wsh_delivery_details updated :'||sql%rowcount);
debug('======================================================================');
debug('Switching from serial number jct20591 to JCT20591 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'JCT20591'
WHERE serial_num = 'jct20591';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'JCT20591'
WHERE new_serial_number = 'jct20591';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_return_err :='Updating in one of the script has this error:'|| substrb(sqlerrm, 1, 55);
debug('Value of l_return_err='||l_return_err);
END;
Thanks
Nagamohan -
How to tell if column value has changed for use in workflow actions
Hello,
I am using Sharepoint 2010 and for one of my Lists, I am using a general list workflow. What I need to be able to do is determine if a column value has change (say an "Assigned To" field) because I only want to take some action if that particular
value has changed. I want to be able to have a workflow action that would be something like:
If Current Item: Assigned To not equals [OLD VALUE]
I have found some web searches that talk about creating a duplicate list or duplicate (but hidden) column but that doesn't seem to be the way to go. I have document versioning set but don't if that can be used to help with this. One possible
thought (although I haven't tried it to see if it works) is to create local variables and have the values in the variables be the "old value". Just not sure if there is a best practices for doing this.
Thanks for any thoughts - PeterHelen,
Not sure I fully understand your goal. We don't use "tasks" at all but if you are looking to have your workflow check certain valus and be able to send email messages to people based on whatever, then you can certainly do that (as long as your Sharepoint
has the email setup. We do this for alot of workflow tasks.
So, in the workflow you can have a blanket statement like what I previously listed:
if Current Item:hiddenStatus not equals Current Item:Status
.... do something
or you can do something like:
if Current Item:hiddenStatus equals "In-Progress"
.... do something
Else if Current Item:hiddenStatus equals "Completed"
.... do something
or combine the two and do nested "if" statements. Then you add an email statement wherever you need it like:
if Current Item:hiddenStatus equals "Completed"
then email "these users"
To add the email part, just type in "email" on the line where you want to add a statment. There is only one option to choose from. That will display the line "then email these users". The "these users" will be a link. When you
click it you will get a popup to add the email info. We typically will send the email to a user (or users) that are already listed in one of the PeoplePicker fields. On the email form, you can type in your own text, designate that a value is based
on a column value (like our PeoplePicker), designate that a value is based on a workflow variable, add a link to the current item, etc. To get to these options you will click the button to the right of the fields or use the "Add or Change Lookup" button
in the bottom-left for the text area. There is alot you can set in the mail.
Does this help answer your question?
- Peter -
How does an NSTextField know that it's value has changed?
I have a textfield that can either be edited by hand, or set through another control. (It's a page number, so you can jump to page 16 by typing in 16, or you can page up and down with the next/prev buttons) I have the value of the text field bound to an int page variable.
It seems to work correctly, when you type a page number in, it jumps, when you page up and down, the page number in the text box changes appropriately.
However, at some level, when I page up and down, the text box doesn't seem to know that it's value has changed, because if I type 1 it doesn't do anything. It doesn't call the bound set-method or anything. It looks like the textfield is thinking "I'm already 1, so I don't need to do anything." Even though it was 5 because I hit next 4 times. If I type an number other than 1, it goes there. If I THEN type 1, it goes to page 1, because now it thinks it's on that other page.
The problem seems to be that I'm changing the value of the textfield programatically, but some part isn't getting the message.
Does this seem like a reasonable explanation? And either way, any ideas on what's causing it?
thanksSolution: in order for the textfield to behave properly, I need to do everything through the bound instance variable.
The problem was that the "page" instance variable doesn't actually exist, there's a page method and a setPage method, but the actual page is kept elsewhere. When I make sure to call the setPage method from the next/prev code, it seems to work. -
sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.
sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Is it possible to know if an item value has changed
Hi,
I'm working on a form and need to know if an item value has changed without compare it with database_value of get_item_property. there is a button <save> on the form and i want to know when user click again and again on button save if this item value has changed. thanks for your ideas.Tabit7 - Posted: Apr 9, 2011 12:15 AMbut sometimes in query mode, the item is not navigable and its vallue changed and the prev_value did not work, perhaps the w-n-i-i do not fire>
If you look up the trigger in the Forms Help system it will tell you if the trigger will fire in Query Mode. The WNII trigger will file in Query Mode where as the Pre-Text-Item trigger does not.
i try an other way and it seems to work, i put a flag in w-v-i when database_value is different from block value and use this flag in button Save, thanks a lot for your idea it put me in the way. Glad you were able to find a way to resolve your issue. ;-)
HamidHelal - Posted: Apr 10, 2011 9:27 AM can you please give an example of u'r idea ? >
First, create a variable that is visible to the entire form. Many people would simply use a GLOBAL variable, but I do not like the limitations of GLOBALs and I don't like the fact that they are visible to the entire Forms sessions, not just my form. I prefer to use a Forms program unit (PU) Package Specification so I can explicitly define the variable data type (eliminates the need to cast the GLOBAL to the correct data type) and the variable only occupies the amount of memory needed to support the variable. Also, when I exit my form, the variable is automatically erased.
/* Sample Forms PU Package Specification */
PACKAGE Form_vars IS
g_prev_val VARCHAR2(50);
END Form_vars;No that I've created a variable to store the Previous Value of an Item, I can write code to use it. I will use a Form Level When-New-Item-Instance (WNII) trigger to ensure I capture the value exiting value of the item before any changes.
/* Sample WNII trigger */
BEGIN
Form_vars.g_prev_val := Name_in(:system.trigger_item);
END;This is a very simple example. There are many other ways to implement this method; such as using the Pre-Text and Post-Text-Item triggers as Abdetu suggested.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
Notify RichTextEditor that value has changed
Hi.
I'm changing value of RichTextEditor through JavaScript (with commandToolbarButton on custom toolbar inside RTE).
Now if I want to commit/submit application says that there is no changes.
As soon I type something (besides using my custom toolbar buttons to change value of RTE) everything is submitted. Obviously there are some triggers based on keyDown or something like that, to notify that value has changed. Now my question is how to notify (from JavaScript) RichTextEditor (or who else) that value is changed?
RegardsAfter declaring private RichTextEditor rte1; call the method rte1.isChanged(); the method will return true if there is a change
Nigel -
Fields don't recognize their value has changed when a copy/paste value in inputed
I'm having a minor hiccup with my copy and paste buttons.
I have check boxes that, when checked, make other fields visible. The copy/paste actions recognize when the check box value is 1 and paste accordingly in the new instance of the subform, however, the invisible fields do not become visible, despite the check box value being 1 in the new instance. I feel like I'm missing something simple....possibly something that forces the scripting within the check box field to run since it is not recognizing that it's value has changed? If I manually click the check box in the new instance, the scripting works and the invisible fields become visible so I know its not an issue with creating new instances.
Any suggestions will be appreciated...I am new to this...
ScottStill interested in solving this issue....anyone? please?
-
I have downloaded the latest pages update on my iPad, but my iMac still has Pages version 4.3, and I cannot find out how to update it on my desktop. When I try to send something from my iPad pages via email to be opened on my desktop in Pages, it won't open in Pages. I get a message that it can't be opened because the version is too old. I sent the document as a PDF and it worked. But I want to be able to use Pages back and forth. HOw do I update the Pages version on my desktop iMac?
The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
Or contact AppleCare. They made this mess, let them fix it. -
I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916 -
How to identify whether a TransientVO value has been changed or not on jsff
Hi
I have a TransientVO view object dragged onto jsff page. Is there any way to identify in backing bean or in Application Module to identify whether there is any attribute value has been modified or not?
Thanks in advance !!Hi:
My understanding is that's ADF's internal business to keep track of RowSet changes. In your code, it's not expensive to explicitly call commit OperationBinding. When your code issue an explicit commit, ADF will check if a real commit necessary or not. If any row or attribute changed, a real commit will happen.
If your application really want to get notified when any attribute changes, and you feel it too much to implement a valueChangeListener for every inputText, you should try a more generic one: rowUpdated(). I never use this one, but according to the manual, your probably can set a flag in your overwritten rowUpdated to flag an attribute value change when it happens.
But I really recommend you simply issue a commit and let ADF decide the necessity of a real commit. If you are really interested in which specific field changes, to me you have only 2 options, 1 is to do valueChangeListener, the other is try to figure out if rowUpdated() helps.
If you feel my answer helps, please mark it as 'helpful'; If it is correct, please mark it as 'correct'.
Thanks,
Alex -
How to update and use the values of variables of another class
I can we update or use the values of the variables of another class. For example, if we have class A
public class A //(situated in package view)
public s0,s1;
public void runFunction()
...some coding and proceedings
s0="Hi";s1"Hello";
......some coding
RequestDispatcher dispatcher = request.getRequestDispatcher("/MainUser.jsp?alert=F");
dispatcher.forward(request, response);
ARunner.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
a.runFunction();
%>
MainUser.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
System.out.println("S0:"+a.s0+" S1:"+a.s1); //should print S0:Hi S1:Hello, but printing S0:null S1:null
%>
A.class has some procedures and String variables which can be updated and later can be used in JSP pages. The project starts with ARunner.jsp which uses the A.class and updates the values of string variables s0 and s1of A to hi and hello respectively.And then redirects the page to MainUser.jsp.
Now what I want is ,when I call those string variables(s0 & s1 of A.class) in any another jsp likeMainUser.jsp it should give me the value of hi and hello respectively not null as it is giving right now. Could you refine the coding for this one?public class A //(situated in package view)
public String s0,s1;
public void runFunction()
...some coding and proceedings
s0="Hi";s1"Hello";
......some coding
RequestDispatcher dispatcher = request.getRequestDispatcher("/MainUser.jsp");
dispatcher.forward(request, response);
ARunner.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
a.runFunction();
%>
MainUser.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
System.out.println("S0:"+a.s0+" S1:"+a.s1); //should print S0:Hi S1:Hello, but printing S0:null S1:null
%>
giving code again to remove the typing errors. Please guide. -
Q:Determine if a item value has changed
Hello,
I am sure I am missing something basic but I just can't figure out how to do accomplish this.
I have a form with a radio button (Yes or No) which I need to determine in a Page Process if the user has changed the value to Yes or not. The result of this will decide if I am going to send an email or not.
I am running APEX 4.2.1.
Anyone?
Thanks
AndyOkay.
1) For the Dynamic Action:
You want the Action to be "Execute PL/SQL Code".
Under Settings, in the code window just put the single "null;" satement.
Under Settings, for Page Items To Submit - Pxx_RADIO -- note - no colon here!
Under Setitngs, for Page Items to Return - Pxx_RADIO_LAST -- not no colon here!
(And don't put both Items on both line because that just causes a lock up when executed.)
2) The only down side is that if you display Pxx_RADIO_LAST, it will not show it's value until the Pxx_RADIO is change and the values is return in the Dynamic Action. But as soon as it's returned, it's the old value of Pxx_RADIO. And if Pxx_RADIO is toggled, Pxx_RADIO_LAST remains that initial value that it was when first set. If you want to see Pxx_RADIO_LAST on the screen when the page renders, I suppose tou need a DA to save it to the session state when it's set in the before header process.
If you want, look here on p. 5.
Workspace: SIMPLE_DEMOS
UN: hcarson at woh.rr.com
PW: SD123456789
RADIO_DEMO ID:25096
Dever / Ima9Dever
Page 3: Radio Group
Page 4: Checkbox
Page 5: Hidden Item Demo
To see that the value is saved, Set Radio Group to "Yes" and then go to p. 4. Go back to p.5 and "Yes" will be still be set but the Text Field -- I changed to Text from Hidden -- will be blank. When you click No, then the "Pxx_RADIO_LAST" value of Y will appear here. (Make sense?)
Howard -
Knowing when an item value has changed
Hello
If you have a item in a form - :P1_fred which is a database columm fred
The database table conrtaining fred columm is read and updated by
1) Automated Row Fetch
2) Automatic Row Processing
This works fine
I need to add a condition based if the valve of :P1_fred has changed.
My currect way at the monument is to record the value after the Automated Row Fetch to :p1_fred1
Then compair :P1_fred to :P1_fred1 and before the coniition before Automatic Row Processing
Whiile this works, is there a simple way of doing this?
Thanks
PeteHi Pete,
I never do "By Reference" (or OUT) for parameters - I tend to create functions instead of procedures and do:
SELECT check_file_one(:new.key) into status1 FROM DUAL;or something similar.
From what I can see of the create procedure guide, you can use as many OUT parameters as you like: http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6009.htm#sthref7098
The only time I've seen anything similar is when one process has terminated and cleared out the variables. But this was when I'd have / or GO in the procedure itself.
What happens if you create a second variable for status1 (say, status1copy) and set this as "status1copy := status1" immediately before the second procedure call - does status1copy retain its value?
Andy
Maybe you are looking for
-
Music imported via passport drive is not playable
My brother and I jointly own a bunch of jazz CD's. In the past he has burned them into his iTunes. Now I have gotten an ipod and he copied them into a portable hard drive - a "passport" - and I have copied them into my iTunes. But when I try to synch
-
What's the process to replace an SSL certificate
I have to replace an expiring SSL certificate in this server and can't recall the procedure. I have the new cert, and intermediate CA, but can't remember what utilities to use to replace the old with the new.
-
Layered photoshop image is not becoming a sequence
This has me tearing my hair out. I created a layered photoshop image (PS CS2) and when I import it into FCP5 it does not become a sequence. Both layers are the same size and are a "now and then" image of the same site. Help! Thank you Ann
-
I can't get any work done since switching to Lion
Help! I really like the new ammenities in Lion, but pretty much everything freezes up multiple times throughout the day. The only thing that helps is to restart, which is a pain. I'm having to reboot at least 3X a day and sometimes more. I can't ge
-
I have my PC at the window "Make text and others items window larger or smaller" set at the 150%. How great was my surprise when I found that this setting of my PC broke my RDLC report print deployment. Do you now about this mistakes? Is that behavio