How to update not all attributes with MRU ?

Hi,
I've a table with four attributes. Two of them are filled (by an insert) in the beginning of the year. The other two have to be filled in during the year.
I want an MRU-process that only shows the first two attributes and enables to udate the last two attributes. How to do it ?
Any reaction will be appreciated.
Leo

If I understand this right, you need to change the type of the column from text field to
standard report column. Also, take out the reference to table / colum.
Denes Kubicek

Similar Messages

How to update my ibook G4 with out itunes

how to update my ibook G4 with out itunes

Your question begs more questions before an answer...
What are you trying to upgrade, and why would you try to use iTunes
in a vintage G4 computer that cannot run an OS X later than 10.5.8
at best? (and only if it has a processor at least 867MHz or better)
With at least a 1.0GHz iBook G4 you could run Leopard 10.5.8, and
the system requires a retail DVD to install the 10.5, then go online
after installation, to get the Combo 10.5.8 update, by use of Software
Update within that first earlier system...
If the computer does not have at least the minimum processor, it would
not be able to see Leopard as a system, so Tiger 10.4.11 is the last...
http://www.apple.com/support/leopard/
iTunes does not upgrade or update much of anything in an obsolete &/
or vintage Mac OS X before the Intel-Mac era, and prior to OS X 10.6.8.
If your computer does not have an iTunes version at all, you can go to
Apple support downloads and look at older iTunes, and older safari,
and some other bits that are limited to their respective vintage OS X.
Usually the upgrade path utilizes DVD media or CD media, for software
& depending on what kind of software, then later get update-downloads.
To see if there may be anything not already installed in the system or
applications that could exist in the Apple support download servers,
you could see if the System's own Software Update, located in Apple
Menu in upper left side of the menu bar in Finder, can locate some.
If you perform a new install and did not save all the bits as downloaded
from when they were more current, some updates to original media that
formerly were online and available as download (step updates, not full
upgrades) you may eventually be unable to upgrade then update an older
OS X system; the remainder of the later or last fixes were in the update.
So, if you have an old G4 PowerPC Mac computer running, say Tiger 10.4.3
and thought to use some software intended to run in Tiger 10.4.11, then
you'd have to see if Software Update could find the 10.4.11 Combo update.
After updating the main system, other applications may also see a need to
be updated, if they were not already as far as they could go, in their vintage.
iPhoto, and other applications, such as they were, had updates to their main
application. So with iTunes, the last version that can work in a PPC G4/G5
non-intel would be in the last supported OS X, Leopard 10.5.8, and that
version number is iTunes 10.6.3; so you can't visit an App Store or Mac App
Store nor can you run Snow Leopard on a PowerPC architecture Mac.
With the intel-based Mac, and Snow Leopard, you can access the online
Stores to include recent Mac Apps, App Store, iTunes Store, etc. A light
version of early iTunes (see iTunes Player) can be seen, and their Radio
still plays free music channels. I have several older pre-Intel Macs...
The matter involves the vintage of the device, the system, and limits of the
old vintage/obsoleted configurations where both are interdependent.
Not sure if this helps, but more of a history lesson may be read if you look
into everymac.com and compare models, build years, and other specs...
If you need some feature or function not supported by vintage hardware or
vintage software, or a newer web browser, you have to look further. A fair
browser can be found in TenFourFox. I use it daily in a PPC G4 MINI 1.5GHz.
with Leopard 10.5.8. Plus others. To go further, look into an Intel-based Mac
such as MacBook2.1 & then buy the Snow Leopard retail DVD for about $20.
Hopefully this helps somewhat...
Good luck & happy computing!

How to update adobe flash player with os10.6.8

how to update adobe flash player with os10.6.8

You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US which also covers ‘blocked plug-in’.

How to update the posted documents with Business Area wise

Dear experts
Please suggest me how to update the posted documents with Business Area wise
Ajeesh.s
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Nov 2, 2011 2:26 PM

Hi,
Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
Hope that helps,
Rod West

Retrieve all attributes with specified name attribute

hi all,
how to extract the ancestor attributes with given name which is also an attribute?
for eg.
<country>
<sponsor id="1" level="1" name="john">
<sponsor id="2" level="2" name="mary">
<sponsor id="3" level="3" name="ken">
<sponsor id="4" level="4" name="mick"/>
</sponsor>
</sponsor>
<sponsor id="2" level="2" name="kary"/>
</sponsor>
</country>
(the structure above will be deemed as unlimited nested nodes)
+how to get ancestor given name=mick, will return one way ancestor sponsor named: ken,mary and john?
+the attribute name is the key to travese up or down, how to get the value?
please advise, and thanks
regards,
wesley

i solved one part of my problem.
But, now i have to get all attributes for each users and i couldn't find them. The getattributes method doesn't return anything (i 'd like to retrieve the first name, last name, adress ...)
thanx for help

How to update a dbf file with gui_upload???

hi friends,
i would like to know how to update a dbf file with gui_upload???
as i hve already know that it's easy to convert dbf to tab formatted text fle and thn upload it.but i want the direct uploading way.i don't let my user's bsy with converting existing dbf to txt.so pls help me asap!!!!!i will be thankful to you!!!!!

its very easy you can search other forum!!!

How can I view all images with Safari on my mac?

how can I view all images with Safari on my mac? When I go to pinterest or any stock photo site I can only see some of the images on my mac.

Please link to an example of a page you're having problems with. It should be accessible without a login.

How do I make ALL files with RTF extension open in Nisus Writer?

How do I make ALL files with RTF extension open in Nisus Writer? Right now it opens in Text Edit. I don't want to change it for one file. I want all files, regardless of how many or where they are.

select a .rtf file in finder and enter command+i. in the resulting popup go to the "open with" section and change the app to open it to Nisus Writer and click "Change All".

HT1296 how do i sync all music with ipod on new computer

How do i sync all music with ipod on new computer

Connect the iPod and sync with iTunes the same way that you sync any iDevice with iTunes. If you are trying to transfer the music on the iPod into iTunes on the computer - connect the iPod to your computer and launch iTunes. Right click on the iPod name under the devices headings and select transfer purchases. That will transfer the purchase songs on your iPod into your iTunes library.
If you provide a few more details of what you actually are trying to do, it would be a little easier to provide you with the help that you seek.

Fix *most but not all* issues with Time Capsule, Time Machine and 10.5.3

There are so many posts related to this issue, that I just wanted to create one short post with a how to fix / quick tips that seems to work for most but granted not all
Issues: Cannot backup, gets stuck into preparing phase or backup volume seems to be corrupted or not working. User was able to use TM with TC w/o problems before update to 10.5.3
1) Turn off TM
2) reboot TC (unplug and plug back in or do it via Airport Utility)
3) Disable energy saving and screen saving features (* see remark at the end)
4) reboot iMac, Macbook or whatever you are using
5) go to finder, unmount the backup volume
6) force a manual backup in TM
7) it will take up to 30 minutes preparing backup and then it should work
(*) I found that if the Mac enters into sleep mode or a password protected screensaver sometimes the backup gets interrupted and one get an error message. This seems like a bug and I reported it to Apple.

Hi! I've had the same problem and in my case I even couldn't access the Time Machine with the Airport Utility though I was properly connected with the network. Now it seems to work, and here's what I did:
- I did a hard reset of TC by pressing the reset button for 5 sec. until the light starts flashing
- I set up the whole network/airport/tc preferences again (what you always have to do after hard reset)
- I manually startet a backup.
When I manually started the back up for the first time, the TM preferences said "Preparing" and then stopped without backing up anything.
I restarted the backup again (manually) and finally it worked like described in this post: "Preparing" for roughly half an hour.
In this time, Time Capsule/Machine finds out, what files needed to be backed up. After that Preparation period, time machine started backing up as usual.
All you have to do is hard resetting and setting up the Time Capsule from new. You DO NOT have to delete the hard drive!!!
Message was edited by: DoubleMumboJumbo
Message was edited by: DoubleMumboJumbo

How to update a new laptop with iTunes from iPad 2?

I have recently bought a new laptop and when I've opened iTunes on it, hardly any of my music etc is on it. How do I sync all my devices?
I have seen the iTunes match but do not want to purchase that. Is there a way for all my devices to be synced and to automatically update after each new purchase?
Thanks in advance.

Hello 2012Nano
For any purchases that are made through the iTunes Store, you can setup Automatic downloads for most purchases to be downloaded to either your computer or iOS device. Check out the article below for more information on how to set that up.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

How do I find all pictures with no (empty) keyword ?

I have decided to import all my pictures into LightRoom.
A lot of my older pictures are not registered with any keywords :(
- only with IPTC location information.
My plan is to systematic go through all my pictures and add relevant keywords to all pictures - so my old pictures become as searchable as my newest pictures.
Some of my old pictures has keywords some has not.
How do I in Lightroom - find all pictures with no keywords?
I have tried to use the Find tool - but don't see any options to search for "Empty/missing" keywords.
Also I would like to find all pictures with few keywords and in step II add additional keywords to these pictures.
Any ideas on how to make a find all pictures where number of keywords is less than X inside or outside LightRoom.
Henrik Bach
Denmark

> I also did think of the SQL idea.
> If I find a way of doing this I will repost my findings.
Well, being a tech geek, I found this challenge kind of irresistible,
and I'm happy to report I have a solution for you.
STEP 1
First, make a copy of your "Lightroom Database.lrdb" file (we'll work
off the copy to be safe)
STEP 2
Next, you need to be able to browse the database. The database is in
SQLite3 format. I tried installiing an SQLite3 ODBC driver and accessing
it through MS Access 2003. While Access was able to see all of the
tables in the database, every time I tried to link to one I got:
"Reserved error (-7748); there is no message for this error"
I found a few tips for this but wasn't able to work around it and get it
to work. Which is a shame, since Access would be the easiest way for
browsing and querying tables.
Instead I found an open source tool called SQLite Database Browser.
http://sourceforge.net/project/showfiles.php?group_id=87946&package_id=91778&release_id=41 4746
I used the Windows version. There appears to be a version for MacOSX on
PowerPC. It doesn't look like there is a version for Intel based Macs
(though if you know how, you could always try downloading the source and
compiling it yourself).
STEP 3
After you install the browser, open it up, choose "Open Database" and
select the COPY of the lightroom database we made in step 1
STEP 4
go to the Execute SQL tab and issue the following command
SELECT A.idx_filename, count(C.name)
FROM Adobe_imageFiles A, AGLibraryTagImage B, AGLibraryTag C
WHERE A.image=B.image AND B.tag=C.id_local AND C.kindName='AgKeywordTagKind'
GROUP BY A.idx_filename
HAVING count(C.name) <= 3
That will give you all images with 3 or fewer keywords applied.
Of course, theres no guarantee that this wont break in future versions.
Now an explanation of the data.
Adobe_imageFiles - contains data about image files:
1) idx_filename is the filename
2) absolutePath is the full file path
3) image is a unique ID for the image which you can cross reference in
other image related tables
AGLibraryTag - contains info about "tags" applied to images:
1) id_local is a unique ID for this "tag", which you can use to cross
reference in other tag tables
2) kindName is the kind of tag you are looking at. Available values
appear to be:
AgCaptionTagKind
AgCollectionTagKind
AgCopyrightTagKind
AgEnumeratedMetadataTagKind
AgFolderTagKind
AgImportTagKind
AgKeywordTagKind
AgMissingFileTagKind
AgQuickCollectionTagKind
AgSpecialContentOwningTagKind
AgTempImagesTagKind
3) name is the value for that tag (the collection name, the keyword, etc)
AGLibraryTagImage - Use this to connect the images and tags tables

HELP iPhone 5 got reformatted while being updated. not all datas recovered from iCloud.

I recently updated my iphone5 with iOS 7.0.3 but while updating it was reformatted. I tried to recover my apps and photos from iCloud but not all datas were recovered. I am sure that I was able to back up my phone regularly. Only new photos were recovered the older ones which were the first ones that I backed up cant be found. Can I still recover those datas?

Restoring the backup should recover the photos that were in the camera roll at the time of the backup. If that didn't happen, all you can do is try restoring the backup again. You might try some of the tips mentioned in this discussion thread that other's found useful when they had a similar problem, such as the one by ezjules: https://discussions.apple.com/message/19518589#19518589.

How to update my iphone through with pc

plz help me.
my question is how to update my iphone 5s through date cable with my pc

Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support

How to update the MDS Repository with new structure over the older one

Hi,
I am working on the Oracle SOA MDS repository and I want to update the mds repository with new folder structure over the older one but I am not able to do this . I am able to update the mds in local system but not able to do this for remote server.
Please help me
SOA 11g : 11.1.1.5

Welcome to the Apple discussions.
These discussions are user-to-user. Apple generally doesn't monitor the discussions.
My Turkish language skills are non-existant, however, you can use this to find an Apple store close to you: http://www.apple.com/uk/buy/locator/ (you choose your country in the locator) . It may be as easy as returning it to a local store. In some countries you have a short time period to return anything bought from Apple (for example, 14 days in the US). If that doesn't work, you want to contact Apple customer service. Unfortunately, this is where I was unable to maneuver through the Turkish Apple site, due to not knowing the Turkish language.

How to update not all attributes with MRU ?

Similar Messages

Maybe you are looking for