How to update older pdfs to work with Adobe X
We have documents posted on a website and use a href link (html) to open pdfs to specific sections of the pdf which are highlighted. These pdf's were created with QuarkExpress and Acrobat Distiller 7.0 and do not work properly with Adobe X. It appears that the older pdf's contained comments that act similar to html anchors, in other words the comment is labled and that lable name is called from the html web page: "nameofdocument.pdf#somename"
You should read this: http://partners.adobe.com/public/developer/en/acrobat/PDFOpenParameters.pdf
Similar Messages
-
How can I make pdf to work with Mac OS 10?
All I get is code. Trying to transfer bank statements. It worked with Rev9. No luck with 10 Any work around?
sandydarcy wrote:
Jeff
I hope you can work magic. I have tried to use: Adobe Acrobat 11.0.03, Adobe Reader 9.2.0, Adobe Reader 10.0.03. Use Safari 6.0.5 with Apple OSX 10.2.4 I try and get my bank statements from US Bank and all I can download or look at is some kind of code. Looks like source code. My wife OSX 10.2.4 works with Adobe Reader 9.2.0 on her new iMac desktop.
Thank you for your help and/or anyone out there that has an idea.
Number of things...
There IS NO WAY that a NEW iMac, which is a Intel Mac, is running OS 10.2.4, which is a PowerPC Operating system. OS 10.2.4 was OBSOLETE in April 2003. The final update for OS 10.2 was 10.2.8 http://support.apple.com/kb/DL1194.
Version
Build
Date
OS name
Notes
10.2
6C115, 6C115a
August 24, 2002
Darwin 6.0
Original retail release
10.2.1
6D52
September 18, 2002
Darwin 6.1
About the Mac OS X 10.2.1 Update, codename Jaguar Red
10.2.2
6F21
November 11, 2002
Darwin 6.2
About the Mac OS X 10.2.2 Update, codename Jaguar Blue or Merlot
10.2.3
6G30
December 19, 2002
Darwin 6.3
About the Mac OS X 10.2.3 Update, codename Jaguar Green
6G37
Updated retail release
6G50
Server edition; retail release
10.2.4
6I32
February 13, 2003
Darwin 6.4
About the Mac OS X 10.2.4 Update, codename Jaguar Pink
10.2.5
6L29
April 10, 2003
Darwin 6.5
About the Mac OS X 10.2.5 Update, codename Jaguar Plaid
10.2.6
6L60
May 6, 2003
Darwin 6.6
About the Mac OS X 10.2.6 Update, codename Jaguar Black
10.2.7
6R65
September 22, 2003
Darwin 6.7
Removed from distribution due to defects
10.2.8
6R73
October 3, 2003
Darwin 6.8
About the Mac OS X 10.2.8 Update; released as 6R50 for one day
6S90
About the Mac OS X 10.2.8 (G5) Update
Also, the HIGHEST version of Safari that will run with OS 10.2.4 is Safari 1.0.3
Operating system
Operating system version
Latest Safari version
Support
Mac OS X
Mac OS X v10.2 "Jaguar"
1.0.3 (August 13, 2004)
2003–2005
Mac OS X v10.3 "Panther"
1.3.2[1] (January 11, 2006)
2003–2007
Mac OS X v10.4 "Tiger"
4.1.3[2] (November 18, 2010)
2005–2010
Mac OS X v10.5 "Leopard"
5.0.6[3] (July 20, 2011)
2007–2011
Mac OS X v10.6 "Snow Leopard"
5.1.9[4] (April 16, 2013)
Since 2009
Mac OS X v10.7 "Lion"
6.0.5[5] (June 5, 2013)
Since 2011
OS X v10.8 "Mountain Lion"
Since 2012
Microsoft Windows
Windows 2000
3.0.3 Beta (July 31,2007)
2007
Windows XP
5.1.7[6] (May 9, 2012)
2007-2012
Windows Vista
Windows 7
2009–2012
Windows 8
2012
I'd recommend using Firefox to download your bank statements and Mac Preview to open them if you're actually using OS 10.2.4 -
How well does Aperture 2.1 work with Adobe Photoelements 6?
I am currently working with Aperture 2.1. I understand from the Apple one-to-one trainers that I would get improved editing if I installed Adobe Photoelements 6. Yet, when I had Adobe Phototoelements 5 on my Leopard, it crashed iPhoto and iPhoto crashed it. I now have both iphoto and Aperture 2.1. No one I called at Adobe Tech support had a clue as how Adobe relates to Apple Computers; it was really amazing. Does anyone out there have experience with Aperture 2.1 and Adobe Photoelements 6 together as editors? Many thanks for your time.
Maxsgirl
Levittown, NYMaxsgirl
I've only had Elements 6 a couple of days and haven't done much with it but have had no problems passing pics back and over to it from iPhoto or Aperture.
Regards
TD -
Update to kichat: FAQ 2 - How to get my router to work with iChat?
kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008 -
My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?Hi ccharat,
Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
I hope this helps,
-Joe -
Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?
You have to look at the email protocol being used. the Apple email system uses IMAP, does Tinyworld use IMAP or POP?
Does the email system permit delivery receipts to be requested?
Just some of the things one needs to determine from the information provided by the email service provider. -
I have an older G5 tower Power PC and the OS 10.5.8, but the firefox and safari browers are no longer supporting this computer. How can I download an older version that works with this computer?
Or what is the newest OS system I can load onto this computer?
I think it is from 2006Hello,
10.5.8 is the highest OSX it can run.
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
SeaMonkey seems pretty fast also, with many options...
http://www.seamonkey-project.org/
http://www.seamonkey-project.org/releases/
Might also look into iCab & OmniWeb versions. -
My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host> -
[svn] 1317: Updates to get flex working with the Vector stuff.
Revision: 1317
Author: [email protected]
Date: 2008-04-20 12:12:54 -0700 (Sun, 20 Apr 2008)
Log Message:
Updates to get flex working with the Vector stuff. Had to add support for the new name type, and new applytype opcode to the Optimizer/Merger that flex uses. Also had to slightly change how the instantiated vector classes find their declared methods. Previously they were copied into the new class, but now they just point to the original vector class.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/abc/ConstantPool.java
flex/sdk/trunk/modules/asc/src/java/macromedia/abc/Decoder.java
flex/sdk/trunk/modules/asc/src/java/macromedia/abc/Encoder.java
flex/sdk/trunk/modules/asc/src/java/macromedia/abc/OpcodeVisitor.java
flex/sdk/trunk/modules/asc/src/java/macromedia/abc/Opcodes.java
flex/sdk/trunk/modules/asc/src/java/macromedia/abc/Printer.java
flex/sdk/trunk/modules/asc/src/java/macromedia/abc/Scanner.java
flex/sdk/trunk/modules/asc/src/java/macromedia/abc/Visitor.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/Parser.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/ConstantEvaluator.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/FlowAnalyzer.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/ReferenceValue.javadespite the workaround, it doesn't fix the real problem. It shouldn't be a huge deal for adobe to add support for multiple svn versions. Dreamweaver is the first tool i've used that works with svn that doesn't support several types of svn meta data. If they're going to claim that Dreamweaver supports svn is should actually support svn, the current version, not a version several years old. This should have been among the first patches released, or at least after snow leopard came out (and packaged with it the current version of svn).
does anyone know if the code that handles meta data formatting is something that is human readable, or where it might be, or is it in compiled code.
i signed up for the forums, for the sole purpose of being able to vent about this very frustrating and disappointing situation. -
I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!
I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/ -
Will an older "Time Capsule" work with Mountain Lion?
will an older "Time Capsule" work with Mountain Lion?
It should do. Depends on how you define an 'older' TC. As long as your SW is up to date and the TC has relatively recent Firmware etc then there shouldn't be an issue.
Are you having a problem with yours or just curious before you upgrade the OS?
Regards, -
How does Creative Cloud from teams work with staff who work in two locations i.e. in the office and home?
There is no difference please be aware that each login is provided with two activations however. If you wish to have a computer at both work and home activated though that is perfectly fine as long as your employer is ok with using company software at home.
-
How do I get fios to work with my new desktop w/ Windows Media Center
Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top boxBased on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. -
How can i get acrobat to work with windows vista
How can I get adobeexportpdf to work with windows vista?
But if, on the other hand you do mean Acrobat, please let us know what problem you are having.
-
I upgraded to Mountain lion. I could not open any of my word documents so i downloaded Libre Office. It is downloaded but how do I get it to work with my old documents??
I don't know what file formats LibreOffice supports, but my guess is it can only handle the OpenXML format (new Office docs).
You could use this online converter: http://www.zamzar.com/convert/doc-to-docx/
Maybe you are looking for
-
HT5312 How do I change my email address if I put the wrong one
I put a wrong email address for the recuse and I'm trying to change it to the right one. can u help me change <E-mail Edited by Host>
-
How can I add a shared printer USB plugged to the Time Capsule (on a windows vista PC)
Setting up an airport network was very easy, and is very intuitive and friendly working on a mac. However, I tried to install the shared printer remotely on a windows vista PC and... well, that's a diffrent story. Can anybody help? Thanks!
-
Is there a network version of Adobe Acrobat Pro 9?
Is there a network version of Adobe Acrobat Pro 9? If not, are their volume licenses available? What additional adobe products need to be purchased in order to run Adobe Acrobat 9 on a network? Is there a licensing system that allows, for example, 4
-
Why does the new Numbers (3.0) insist on opening in its own default view (125% zoom, window centered, and format pane open) when I explicitly save it otherwise? It's extremely annoying to have to adjust these things every time I open the spreadsheet.
-
The following NEF files were not imported because they could not be read.
Had to reinstall LR 3.3 and when importing NEF files from Nikon D90 the following message appeared, "Some import operations were not performed. The following files [NEF] were not imported because they could not be read" Windows 7 user w/administrator