How to update only a field or 2 in a data target? Is it even possible?

Hi,
If 10 characteristics in an ODS has been populated in through flat files and it turns out that one of the fields was blank. What is the best way to update the data target with the missing fields only.
Is this what is referred to as Look up? Any pointers to what is known as doing a Look Up?
Thanks

hi Amanda,
for look up ods from another ods, take a look samples
https://wiki.sdn.sap.com/wiki/display/BI/ABAPinBW
Is it possible to read a third ODS in update rules between two ODS?
update rule coding while loading data from ODS to CUBE
Start Routine in Update Rules to populate additional fields from ODS
hope this helps.

Similar Messages

How to update a single field in Word macro

Hello,
I am trying to create an AutoOpen() macro that will update the file name and path when user opens in a Word document, but I can't seem to find anything explaining how to update a single field, specifically the {FILENAME \p} field. There
are other fields in the document, so I do not want to update all the fields. Most of the links I found only explain how to update ALL fields. Can somebody please tell me how I can update only the filename and path field using an autoopen macro?
Thank you

Stefan's response is correct.
Here is a macro that should update only filename fields.
Sub FileNameFieldUpdateAllStory()
' Written by Charles Kyle Kenyon 15 November 2001 - modified for filename 10 Sept 2014
' repaired by Jezebel
' All Story Field Updater - Filename fields
Dim oField As Field
Dim oStory As Range
' On Error Resume Next
For Each oStory In ActiveDocument.StoryRanges
' This goes into headers and footers as well as the regular document
Do
For Each oField In oStory.Fields
If oField.Type = wdFieldFileName Then
oField.Update
End If
Next oField
Set oStory = oStory.NextStoryRange
Loop Until oStory Is Nothing
Next oStory
End Sub
See Installing Macros for help in using this.
Charles Kenyon Madison, WI

How to update a custom field in declarative workflow with VS 2013

Hello,
How to update a custom field in declarative workflow with VS 2013
any help would be appreciated!!!!!
Thanks regards, Vignesh.

Dear all,
I'm using 4.6C right now, i already implement BADI MEREQ001, but this only valid
for creating PR via ME51N.
I found an EXIT_SAPLEBND_001 and tried to implement it,
but i got another difficulties since how i transfer CEBAN structure to EBAN structure.
thanks very much.
Regards,
Billy

How to update a particular field in a form.

Hi Guys,
I just want to know how to update a paricular field in a form.
I want to upadate a field in a view BOM_RESOURCES_V
for that i've a procedure called process_rtg.
now i want to know how to use that procedure.

hi,
check metalink Note:264711.1 on how to use ROUTING BUSINESS OBJECT API
( BOM_RTG_PUB.Process_Rtg package)

LSMW to update only one field in materials

Hello experts,
My requirement is to update only one field 'HRKFT-Origin Group as Subdivision of Cost Element' in material using LSMW. I tried with Standard Batch/Direct Input -> Object - 0020, Method - 0000. But it was not successful as it gave me warning - 'The material cannot be maintained since no maintainable data transferred' at the end.
Now I want to try this using BAPI method in LSMW. But it is showing me error - No target structures could be determined..
Please guide me.
Regards,
Aparna Gaikwad

Hi
i tried the same and am able to do it using LSMW Batch i/p. Object - 0020, Method - 0000.
There in source fields define material, plant and origin grp. in structure relations map the below
BGR00 Batch Input Structure for Session Data                       <<<< MBEW1 Material COsting
      Select Target Structure BGR00 .
    BMM00 Material Master: Transaction Data for Batch Input            <<<< MBEW1 Material COsting
          Select Target Structure BMM00 .
        BMMH1 Material Master: Transfer of Main Data                       <<<< MBEW1 Material COsting
Next in field mapping map those 3 fields: material, plant and origin grp.
while testing do one thing. first take the data and try the same using MM02 manually. if tht is working fine ( i mean if the material is having costing view and you are able to chnage the origin group). then test with the same material, plant and a different origin grp. It will work.

How to update ADRT-REMARK field (by which tcode)?

How to update ADRT-REMARK field (by which tcode)?

Hi,
ADRT-REMARK basically stores the notes which you enter against any communication number such as Telephone Number, Fax number etc for any business partner.
Say for example if you want to address details of a customer via XD01 or XD02; then in the communication tab enter the telephone number or fax number.
Click the button to add more details or more telephone numbers.
Over there you will find a field called as Comments.
This field is ADRT-REMARK.
You do not have a single transaction to maintain this field.
It depends upon the business partner for whom you want to add the details.
For a customer it is XD01 or XD02
For a vendor it is XK01 or XK02.
For a business partner it is BP.
For a user it is SU01D.
Regards,
Ankur Parab

How to update equipment ship to party and sold party data

Hi all,
How to update equipment ship to party and sold party data? Is there any BAPI or FM?

Hi Suresh,
chech with the below
PM_PARTNER_UPDATE      "Parner update
ITOB_EQUIPMENT_READ_SINGLE   "read equmment data
ITOB_EQUIPMENT_MODIFY_SINGLE   "update the parner data for the same equimpmet
hope it helps you..
Thanks!
Edited by: Prasanth on Apr 14, 2009 6:30 PM

My phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is gone

my phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is not salvageable? thank you so much in advance for your help!

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then see Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

How to Update Business Area Field in Posted Document?

Dear All,
Pls tell me how to update Business Area in documents which are posted without entering Business Area field. Pls tell me how to achieve this without using Validations & Substitutions. Any table entries can be maintained for this? Kindly guide.
Regards
Abhijeet

Hi,
I think, you need to post mannually if you have the list of documents posted with out business area.
ex:
1.Before posting of accounting entry as below, you should deactivate business area component in OB65 againest your co.code
2.Post accounting entry as below
40 123456 without business area 100
50 123456 with business area ABC 100
3. Goto T.Code: OB65 activate the business area component.
4. After posting of accounting entry like above you should run transaction F.5D and F.5E again, make sure that above entry not come again while executing F.5D.
First you can try this process in dev client, if you are comfort with this process then follow the same in quality and production.
Note: You can do this transactions in production client, only when there were no users working on the system.
all the best
Regards,
Prasad

How to update a custom field of MARC table using BAPI_MATERIAL_SAVEREPLICA

Hi,
I want to update a custom field (Appended field) of MARC table using BAPI_MATERIAL_SAVEREPLICA. Please help me in this issue. I cannot use BAPI_MATERIAL_SAVEDATA as this updated the MARC table record by record. I have to update bulk records at a time.
Thanks
Rahul.

Hi,
Use the Documentation given for struture in BAPI docuemntation...
For loading data into custom fields of MARC use the structure - BAPI_TE_MARC.
First, structures BAPI_TE_<NAME> (<NAME> = MARA, MARC, MARD, MBEW, MLGN, MLGT, MVKE, MARM, MAKT) and the appropriate check structures BAPI_TE_<NAME> (<NAME> = MARAX, for example) have to be extended by the customer to include the required fields. The structures that are delivered as standard only contain the relevant key fields. When new fields are added to this structure, you should ensure that a field has the same name as the field in the database table. Furthermore, the fields in the structures BAPI_TE_<NAME> can only be CHARACTER fields. Data element BAPIUPDATE is to be used for the fields in the check structure (exception to this: key fields.)
Parameters EXTENSIONIN and EXTENSIONINX are used for transferring data to the method. Field STRUCTURE contains the name of the structure (for example, BAPI_TE_MARA or BAPI_TE_MARAX). This names is used to identify the work area (for example, WA_BAPI_TE_MARA or WA_BAPI_TE_MARAX) to which the data is transferred. The remaining fields in parameters EXTENSIONIN or EXTENSIONINX contain data for the key fields (for example, the material number) and the data for customer-specific fields. The number of characters reserved in both parameters for the contents of the customer-specific fields must match the number of characters for the relevant field in the work area. If the number of required characters is less, the remaining characters are left blank. Only when all characters have been filled can the contact for an additional field be transferred. Bear in mind that only data for which an appropriate indicator has been set in the work area can be updated to the database.
Regards,
Bhargava

IS-RETAIL: How to update custom enhancement field using BAPI?

Hi gurus,
Like ECC BAPI: BAPI_MATERIAL_SAVEDATA,
This BAPI(BAPI_MATERIAL_MAINTAINDATA_RT) is specific for IS-RETAIL to create and update material master data.
But now If I append one custom field "ZFIELD" to end of table MARA, my question is how to update this custom enhancement field(ZFIELD) using BAPI(BAPI_MATERIAL_MAINTAINDATA_RT)
Thanks in advance!

Hi DongHai,
I suggest you create your own BAPI. Just copy the codes in BAPI_MATERIAL_MAINTAINDATA_RT and add your custom fields. If you want to append the data of the custom field in table MARA, first, you have to create a structure table then goto SE11, type MARA and display. Click the APPEND STRUCTURE then choose the structure that you've created. Hope this will help.
Rewards if useful
Regards,
Mark

How to Update the INTRASTAT field for Inclusion/Exclulsion (EIPO-SEGAL)

I would need to know how to update this field in transaction ENPA when the invoice is already posted ( so we cannot use the VF02) from an ABAP program that update the INTRASTAT data for an Exportation.
This field can be found in EIPO-SEGAL
Thanks in advance.

Hi
See the Std Doc of this field
Exclusion/Inclusion indicator for declara. to authorities
Using this indicator, you can control if a document or a document item (SD billing document, MM purchase order) will be excluded from or included in one or more types of declarations to the authorities.
Proceed as follows:
1. Define the inclusion or exclusion indicator. Define for which declaration type an inclusion or exclusion is to take place.
2. Assign the indicator to the document or document item that you want to include in or exclude from a declaration. The assignment takes place in the Foreign Trade data of the document.
3. If you also want to exclude document items with particular item types from a declaration, assign an exclusion indicator to the corresponding item types in Customizing.
Example
You want to define an exclusion indicator that excludes documents from the EXTRASTAT and KOBRA declaration. Create an exclusion indicator and select the "exclusion column" in the definition of exclusion indicators for the EXTRASTAT and KOBRA declaration types.
As soon as this indicator is assigned to a document, this document will not be included in the EXTRASTAT and KOBRA declarations.
Note
Inclusion or exclusion indicators assigned at FT data header level in the document apply to all document items if there is no other indicator at item level.
in our case the values for this field are '01'
take the help of a functional consultant to populate this field
Reward if useful
regards
Anji

How to download only some fields(dynamically) from alv grid layouts

I have ALV grid list.
I have layouts for selecting sets of fields dynamically.
If I select a particular layout, I want to download only those fields into an Excel sheet.
If I select another layout, I want to download only fields of that layout , into an Excel sheet.
Can u plz write examples.
Narendra

Hello ,
Here it is.
FIELD-SYMBOLS <FS> TYPE ANY.
DATA: GR_ATTACHMENT TYPE Z48S3_ATTACHMENT,
        GT_ATTACHMENT TYPE Z48S3_ATTACHMENT_TAB,
        L_F_TITLE     TYPE SO_OBJ_DES,
        L_R_FIELDCAT LIKE LINE OF GT_FIELDCAT,
        L_F_FIELD     LIKE L_R_FIELDCAT-FIELDNAME,
        L_F_EMAILID   TYPE Z48S3_RECEIVER,
        L_F_FIRST     TYPE C.
IF SY-SYSID EQ G_C_DEV_SYSTEM OR
     SY-SYSID EQ G_C_QUA_SYSTEM.
    CONCATENATE SY-SYSID '/' SY-MANDT ':' INTO L_F_TITLE.
    CONDENSE L_F_TITLE.
    CONCATENATE L_F_TITLE SY-TITLE INTO L_F_TITLE SEPARATED BY SPACE.
ELSE.
    L_F_TITLE = SY-TITLE.
ENDIF.
G_R_VARIANT-REPORT = SY-REPID.
G_R_VARIANT-VARIANT = P_VARIAN.
CALL FUNCTION 'REUSE_ALV_VARIANT_SELECT'
       EXPORTING
            I_DIALOG            = 'N'
            I_USER_SPECIFIC     = 'A'
            I_DEFAULT           = 'X'
            IT_DEFAULT_FIELDCAT = G_T_FIELDCAT
            I_LAYOUT            = GR_LAYOUT
       IMPORTING
            ET_FIELDCAT         = G_T_FIELDCAT
            ES_LAYOUT           = GR_LAYOUT
       CHANGING
            CS_VARIANT          = G_R_VARIANT
       EXCEPTIONS
            ERROR_MESSAGE       = 4
            OTHERS              = 4.
SORT G_T_FIELDCAT BY COL_POS.
PERFORM CREATE_EXCEL_ATTM_HEADING_ROW TABLES GT_ATTACHMENT
                                               G_T_FIELDCAT.
LOOP AT G_T_ALVLIST.
    L_F_FIRST = 'X'.
    LOOP AT G_T_FIELDCAT INTO L_R_FIELDCAT WHERE NO_OUT IS INITIAL.
      CLEAR GR_ATTACHMENT-XNEWLINE.
      IF NOT L_F_FIRST IS INITIAL.
        GR_ATTACHMENT-XNEWLINE = 'X'.
        CLEAR L_F_FIRST.
      ENDIF.
      CLEAR L_F_FIELD.
      CONCATENATE 'G_T_ALVLIST-' L_R_FIELDCAT-FIELDNAME
             INTO L_F_FIELD.
      CONDENSE L_F_FIELD.
      ASSIGN (L_F_FIELD) TO <FS>.
      WRITE <FS> TO GR_ATTACHMENT-FIELDVALUE.
      UNASSIGN <FS>.
      APPEND GR_ATTACHMENT TO GT_ATTACHMENT.
    ENDLOOP.
ENDLOOP.
Regards,
Vasanth

How to update the Customer field value of PO Item under the Delivery Address Tab?

Hi Friends,
i tried to update the Customer field Using Bapi_PO_change.I passed the PO Order no,POADDRDELIVERY data with Item no,Adrees no,Customer no.But i am getting no data changed message from return table.I attached the screen shots.So please suggest me the helpful information for resoving this issue.
Thanks,
Dinesh

Thank you friends,
My Problem was resolved.In my case i have passed the customer value in BAPI_PO_CHANGE POITEM Table with updated customer value.
Thanks,
Dinesh

How to get only custom fields from a SharePoint 2010 list?

I am working with the Client Side Object Model. In a console application I am retrieving all fields from a custom list. The problem is the Clientcontext fetches me a bunch of internal fields I do not want to be included. Also this causes some of the fields
to appear more than once.
string siteURL = "http:XYZ";
ClientContext context = new ClientContext(siteURL);
Web oWebSite = context.Web;
context.Load(oWebSite);
context.ExecuteQuery();
//Get the list by title
List produktKatalogListe = spLists.GetByTitle("Produktkatalog");
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml = "<View/>";
ListItemCollection listItems = produktKatalogListe.GetItems(camlQuery);
context.Load(produktKatalogListe);
context.Load(listItems);
context.Load(produktKatalogListe.Fields);
context.ExecuteQuery();
foreach(Field field in produktKatalogListe.Fields)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Is there a way to print only custom fields? This would mean omitting fields like
internalID, GUID...
I tried the following:
if(!field.Hidden)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Unfortunately this not only does not solve the issue but is also not a very good solution for the case I do want to display custom but hidden fields.
Algorithmen und Datenstrukturen in C#:
TechNet Wiki

The following approach seems to solve the issue. Instead for checking if the field is not
Hidden I checked whether it is not FromBaseType.
if(!field.FromBaseType)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Algorithmen und Datenstrukturen in C#:
TechNet Wiki

How to update only a field or 2 in a data target? Is it even possible?

Similar Messages

Maybe you are looking for